7 QC Tools.ppt

1
7 QC Tools
Training module
on

2
What are 7 QC Tools ?
QC tools are the means for Colleting data ,
analyzing data , identifying root causes and
measuring the results.
THESE TOOLS ARE RELATED TO
Numerical DATA processing
USER HAS TO DEVELOP THE
SOLUTION & IMPLEMENT

3
• Pareto Diagram
• Stratification
•Scatter Diagram
•Cause and Effect Diagram
•Histogram
•Check Sheet
•Control Chart/Graph
7 QC TOOLS

4
Process control
( Standardization )
Evaluation of result
Implementation
Develop
Improvement
method
( Solution )
Detecting causes of
problem
Record of facts
Defining the
problem
Identification of
problem
Control
Chart
Scatter
Diagram
Histogra
m
Cause &
Effect
Diagram
Pareto
Diagra
m
Stratifi
cation
Check
sheet
Graphs
Application of QC tools in Problem Solving

5
Pareto Diagram
1. What is Pareto diagram ?
A Pareto diagram is a combination of bar and line graphs of
accumulated data, where data associated with a problem
(e.g., a defect found, mechanical failure, or a complaint
from a customer) are divided into smaller groups by cause
or by phenomenon and sorted, for example, by the number
of occurrences or the amount of money involved. (The
name “Pareto” came from an Italian mathematician who
created the diagram.)

6
Pareto Diagram
2. When is it used and what results will be obtained?
Please refer to the table on next slide for the
usage and benefits of a Pareto diagram. It is
mainly used to prioritize matters, and because
of its easiness of use, the diagram is used in a
wide variety of fields.

7
Pareto Diagram
Pareto Diagram
(No. of Occurrences)
Pareto Diagram
Pareto Diagram
(No. of Occurrences)
Used to prioritize
actions.(Used during
phases to monitor the
situation, analyze causes,
and review effectiveness of
an action.)
Used to identify a problem.
Used to identify the cause of
a problem.
Used to review the effects of
an action to be taken.
Allows clarification of
important tasks.
Allows identification
of a starting point
(which task to start
with).
Allows projection of
the effects of a measure
to be taken
Method Usage Result
Pareto Diagram

8
Pareto Diagram
To identify a course of
action to be emphasized
using a variety of data.
Example
Assessment using Pareto
diagram (prioritization)
Confirmation of Effect
(Comparison)
Details of “ A”
Frequently used to check
the effect of an
improvement.
Improved

9
Stratification
1. What is Stratification ?
Stratification means to “divide the whole into smaller portions
according to certain criteria.” In case of quality control,
stratification generally means to divide data into several groups
according to common factors or tendencies (e.g., type of defect
and cause of defect).
Dividing into groups “fosters understanding of a situation.”
This represents the basic principle of quality control.

10
Stratification
The “common and basic principle” of quality control is
stratification, i.e., to think a matter out by breaking it
into smaller portions. Stratification has a number of
useful purposes. The table below shows only a few
examples of these purposes.

11
Method Usage Result
Stratification
Grouping by day,
time, place,
worker, or
process
X
Y
Z
Number of Units
★★★★★★★
△△△△
○○○
•Used to observe variations
among strata.
•Used to identify the
relationship between cause
and effect.
•Used to identify a purpose
and means to serve the
purpose
[Used during phases to monitor
the situation, analyze causes,
review effectiveness of an action,
perform standardization, and
implement a selected control
measure.]
•Allows observation
of variations among
strata.
•By performing a
cause analysis using
the stratified data,
the following can be
accomplished.
1.Identification and control of a
problem
2.“Division of data (obtained by
using each QC tool) into several
groups”

12
Stratification
Item Method of Stratification
Elapse of time
Hour, a.m., p.m., immediately after start of work,
shift, daytime, nighttime, day, week, month
Variations among workers
Worker, age, male, female, years of experience,
shift, team, newly employed, experienced worker
Variations among work
methods
Processing method, work method, working
conditions (temperature, pressure, and speed),
temperature
Variations among
measurement/inspection
methods
Measurement tool, person performing
measurement, method of measurement, inspector,
sampling, place of inspection

13
Scatter Diagram
1. What is Scatter Diagram ?
A scatter diagram is used to “examine the relationship between
the two, paired, interrelated data types, ” such as “height and
weight of a person.” A scatter diagram provides a means to
find whether or not these two data types are interrelated. It is
also utilized to determine how closely they are related to
identify a problem point that should be controlled or improved.

14
Scatter Diagram
The table on next slide shows some examples of
scatter diagram’s usage. If, for example, there is a
relationship where “an increase in the number of
rotations (x) causes an increase in abrasion (y),” there
exists “positive correlation.” If, on the other hand, the
existence of a relationship where “an increase in the
number of rotations (x) causes a decline in abrasion
(y)” indicates that there is “negative correlation.”

15
Method Usage Result
Scatter Diagram
•Used to identify a relationship
between two matters.
•Used to identify a relationship
between two matters and establish
countermeasures based on their
cause and effect relation.
Example Usage
1.Relationship between thermal
treatment temperature of a steel
material and its tensile strengths
2.Relationship between visit made
by a salesman and volume of sales
3.Relationship between the number
of persons visiting a department
store and volume of sales
4 Others
Scatter Diagram
Scatter Diagram
ｙ Axis
x Axis
Abrasion
Number of
Rotations
Scatter Diagram
Scatter Diagram
ｙ Axis
x Axis
Abrasion
Number of
Rotations
[Used during phases to monitor the
situation, analyze causes, and review
effectiveness of an action.]
•Can identify cause
and effect relation.
•Can understand the
relationship
between two
results.

16
Scatter Diagram
Abrasion
(micron)
ｙ Axis
x Axis
Number of
Rotations
Abrasion
(micron)
ｙ Axis
x Axis
Number of
Rotations

17
Cause & Effect Diagram
1. What is Cause & effect Diagram ?
A cause and effect diagram is “a fish-bone diagram that
presents a systematic representation of the relationship
between the effect (result) and affecting factors (causes).”
Solving a problem in a scientific manner requires
clarification of a cause and effect relationship, where the
effect (e.g., the result of work) varies according to factors
(e.g., facilities and machines used, method of work, workers,
and materials and parts used). To obtain a good work result,
we must identify the effects of various factors and develop
measures to improve the result accordingly.

18
A cause and effect diagram is mainly used to study
the cause of a certain matter. As mentioned above,
the use of a cause and effect diagram allows
clarification of causal relation for efficient problem
solving. It is also effective in assessing measures
developed and can be applied to other fields
according to your needs.

19
Can obtain a clear
overall picture of causal
relation. (A change in
the cause triggers a
variation in the
result.)○ Can clarify
the cause and effect
relationship.
Can list up all causes
to identify important
causes.
Can determine the
direction of action
(countermeasure).
Method Usage Result
Used when
clarifying a cause
and effect
relationship.[Used
during a phase to
analyze causes.]
 Used to develop
countermeasures.
[Used during a phase to plan
countermeasures.]
Material Method
Man
Machine
Cause (4M’s) Result
(Controlled State)
Effect
Cause and Effect
Cause and Effect
Diagram
Diagram
Material Method
Man
Machine
Cause (4M’s) Result
(Controlled State)
Effect
Cause and Effect
Cause and Effect
Diagram
Diagram

20
Mechanism of
Copying Machine
Quality of
Copying Paper
User Surrounding
Environment
Smudges on the
copied surface
Internal devices not
working smoothly
Malfunction of
the roller
Printing too
lightly
Too thin
Folded
Running out
of stock
Dampened
Keyboard handling
error
Error in selecting a
scale of reduction
Error in
placement of
paper (setting
its face up)
Error in
selecting
shading
Deterioration of
performance due
to high
temperatures
Nicotine-
stained
Dirt on the
glass
surface
Dust
Many
Copying
Errors!
Mechanism of
Copying Machine
Quality of
Copying Paper
User Surrounding
Environment
Smudges on the
copied surface
Internal devices not
working smoothly
Malfunction of
the roller
Printing too
lightly
Too thin
Folded
Running out
of stock
Dampened
Keyboard handling
error
Error in selecting a
scale of reduction
Error in
placement of
paper (setting
its face up)
Error in
selecting
shading
Deterioration of
performance due
to high
temperatures
Nicotine-
stained
Dirt on the
glass
surface
Dust
Many
Copying
Errors!

21
Histogram
1. What is Histogram ?
When creating a histogram, “a range of data is divided into
smaller sections having a uniform span,and the number of data
contained in each section (the number of occurrences) is
counted to develop a frequency distribution table.” Then, “a
graph is formed from this table by using vertical bars, each
having the height proportional to the number of occurrences in
each section.”

22
Histogram
A histogram is mainly used to analyze a process by
examining the location of the mean value in the
graph or degree of variations, to find a problem point
that needs to be improved. Its other applications are
listed in the table below.

23
Method Usage Result
Histogram
Histogram
Histogram
Standard
Range
Range of
Variations
X Axis (Values
Actually
Measured)
Histogram
Histogram
Standard
Range
Range of
Variations
X Axis (Values
Actually
Measured)
•Used to assess the actual
conditions.
•Used to analyze a process to
identify a problem point that needs
to be improved by finding the
location of the mean value or
degree of variations in the graph.
•Used to examine that the target
quality is maintained throughout
the process.
•Others
[Used during phases to
monitor the situation, analyze
causes, and review
effectiveness of an action.]
•Can identify the
location of the mean
(central) value or
degree of variations.
•Can find out the scope
of a defect by inserting
standard values.
•Can identify the
condition of
distribution (e.g.,
whether there is an
isolated, extreme
value).

24
Histogram
Frequency Distribution Table
Cutting Length of Steel Wire]
Standard
Lower Limit Upper Limit
Standard
Standard Value
Product
[Histogram of Cutting Length of Steel
Wire]
(Standard: 255 5 mm)
±
Section
Frequency Marking Occurrences
Mean

25
Check Sheet
1. What is Check sheet ?
A check sheet is “a sheet designed in advance to allow easy
collection and aggregation of data.” By just entering check
marks on a check sheet, data can be collected to extract
necessary information, or a thorough inspection can be
performed in an efficient manner, eliminating a possibility
of skipping any of the required inspection items.
A check sheet is also effective in performing stratification
(categorization).

26
Check Sheet
Please refer to the table on next slide for the usage
and benefits of a check sheet. It is frequently used in
daily business operations, often not specifically for
QC purposes.

27
Ensures collection of
required data.
Allows a thorough
inspection of all check
items.
Can understand
tendencies and
variations.
Can record required
data.
Method Usage Result
Check Sheet
Check Sheet
Check Sheet
Day
Process
Process 1
Process 2
Process 3
Check Sheet
Check Sheet
Day
Process
Process 1
Process 2
Process 3
Used to collect
data.
Used when
performing a
thorough inspection.
Used during phases to monitor
the situation, analyze causes,
review effectiveness of an
action, perform
standardization, and
implement a selected control
measure

28
Check Sheet
A check sheet used to identify defects
Date
Defect
Vertical Scratch
Scratch
Dent
Total
Date
Defect
Vertical Scratch
Scratch
Dent
Total

29
Control Chart (Control Chart / Graph 1)
1. What is Control Chart ?
A control chart is used to examine a process to see if
it is stable or to maintain the stability of a process.
This method is often used to analyze a process. To
do so, a chart is created from data collected for a
certain period of time, and dots plotted on the chart
are examined to see how they are distributed or if they
are within the established control limit. After some
actions are taken to control and standardize various
factors, this method is also used to examine if a
process is stabilized by these actions, and if so, to
keep the process in a stable state.

30
Control Chart
There are two types of control charts: one used for
managerial purposes and the other for analytical
purposes. A control chart is used to identify dots that
are outside the control limit, which indicate some
anomalies in a process. In addition, seven
consecutive dots showing values that are below or
above the mean (central) value, or an increment or a
decline represented by seven consecutive dots also
indicate “a problem in a process.”
We need to examine what has caused such a
tendency or an increment/decline.

31
Method Usage Result
Control Chart
Control Chart
Control Chart
x-R Control Chart
Control Chart
Control Chart
x-R Control Chart
[Used during phases to
monitor the situation,
analyze causes, review
effectiveness of an
action, perform
standardization, and
implement a selected
control measure
Used to observe a
change caused by
elapse of time.
In the example “x bar ” -R
control chart, “X bar”
represents the central value,
while “R” indicates the range.
Can identify a change
caused by elapse of
time.
Can judge the
process if it is in its
normal state or there
are some anomalies
by examining the dots
plotted on the chart.
Control Chart for Managerial Purposes: Extends the line indicating the control limit used for analytical purposes to
plot data obtained daily to keep a process in a good state.
Control Chart for Analytical Purposes: Examines a process if it is in a controlled state by collecting data for a certain
period of time. If the process is not controlled, a survey is performed to identify its cause and develop
countermeasures.

32
Control Chart
x- Control Chart
Group Number
Examples of Values
Represented byDots
Values above the
control limit
represented by
seven
consecutive dots
A decline
represented by
seven
consecutive dots
x- Control Chart
Group Number
Examples of Values
Represented byDots
Values above the
control limit
represented by
seven
consecutive dots
A decline
represented by
seven
consecutive dots

33
Graph
1. What is Graph ?
A graph is “a graphical representation of data, which allows a
person to understand the meaning of these data at a glance.”
Unprocessed data simply represent a list of numbers, and
finding certain tendencies or magnitude of situation from these
numbers is difficult, sometimes resulting in an interpretational
error. A graph is a effective means to monitor or judge the
situation, allowing quick and precise understanding of the
current or actual situation.
A graph is a visual and summarized representation of data that
need to be quickly and precisely conveyed to others.

34
Graph
A graph, although it is listed as one of the QC tools, is
commonly used in our daily life and is the most
familiar means of assessing a situation.

35
Method Usage Result
Graph
0
20
40
60
80
100
120
1st Qtr 2nd Qtr 3rd Qtr 4th Qtr
East
1st Qtr
13%
2nd Qtr
17%
3rd Qtr
57%
4th Qtr
13%
Changes in a time-sequential
order – line graph
Amounts – bar graph, etc.
Ratios – pie graph, band
chart, etc.
(The items listed above are
representative examples.)
Can observe changes in
a time-sequential order,
ratios, and amounts.
A graphs is the most
frequently used tool to
examine the various
matters such as those
listed on the left.

36
Graph
Sales
(¥million)
Sales
Office
Iwate Tokyo Osaka Shizuoka
[Bar Graph of Sales]
・ Survey Period: Dec. 1999
・ Prepared by: M/T
[Band Chart of Expenses]
(¥million)
Before
Taking
Actions
After
Taking
Actions
Chemicals
Chemicals
(430)
(430)
Chemicals
Chemicals
(240)
(240)
Oils
Oils
(200)
(200)
Oils
Oils
(150)
(150)
Electricity
Electricity
(170)
(170)
Electricity
Electricity
(108)
(108)
(Total: ¥8 million)
(Total: ¥4.95 million)
Sales
(¥million)
Sales
Office
Iwate Tokyo Osaka Shizuoka
[Bar Graph of Sales]
・ Survey Period: Dec. 1999
・ Prepared by: M/T
[Band Chart of Expenses]
(¥million)
Before
Taking
Actions
After
Taking
Actions
Chemicals
Chemicals
(430)
(430)
Chemicals
Chemicals
(240)
(240)
Oils
Oils
(200)
(200)
Oils
Oils
(150)
(150)
Electricity
Electricity
(170)
(170)
Electricity
Electricity
(108)
(108)
(Total: ¥8 million)
(Total: ¥4.95 million)

37
• Pareto Diagram To identify the current status and issues
• Stratification Basic processing performed when
collecting data
• Scatter Diagram To identify the relationship between two
things
• Cause and Effect Diagram
To identify the cause and effect relationship
• Histogram To see the distribution of data
• Check Sheet To record data collection
• Control Chart/Graph To find out abnormalities and identify the
current status
To sum up 7 QC tools (Numerical data ) are used as follow:

7 QC Tools.ppt

More Related Content

Similar to 7 QC Tools.ppt (20)

Recently uploaded (20)

7 QC Tools.ppt