713studyguide

OSHAcademy Course 713 Study Guide
Copyright © 2000-2013 Geigle Safety Group, Inc.
Confined Space Safety

Copyright © 2000-2013 Geigle Safety Group, Inc. Page 2 of 84
Confined Space Safety
Copyright © 2013 Geigle Safety Group, Inc.
No portion of this text may be reprinted for other than personal use. Any commercial use of
this document is strictly forbidden.
Contact OSHAcademy to arrange for use as a training document.
This study guide is designed to be reviewed off-line as a tool for preparation to successfully
complete OSHAcademy Course 713.
Read each module, answer the quiz questions, and submit the quiz questions online through
the course webpage. You can print the post-quiz response screen which will contain the correct
answers to the questions.
The final exam will consist of questions developed from the course content and module quizzes.
We hope you enjoy the course and if you have any questions, feel free to email or call:
OSHAcademy
1915 NW Amberglen Parkway, Suite 400
Beaverton, Oregon 97006
www.oshatrain.org
instructor@oshatrain.org
+1.888.668.9079

Contents
Course Introduction........................................................................................................................ 9
Course Goals ............................................................................................................................... 9
Module 1: Confined Space Basic Concepts................................................................................... 11
Introduction .............................................................................................................................. 11
What is a confined space? ........................................................................................................ 11
What is the difference between these two definitions?.......................................................... 12
Reasons for Entering Confined Spaces ..................................................................................... 12
Permit-required confined spaces (PRCS ................................................................................... 13
Examples of confined spaces that could become permit spaces............................................. 13
Where confined spaces are found............................................................................................ 14
Why confined spaces are hazardous to entrants ..................................................................... 14
What is confined space “entry”?............................................................................................... 15
Using alternative entry procedures.......................................................................................... 15
Flow Chart................................................................................................................................. 16
Module 1 Quiz........................................................................................................................... 17
Module 2: Confined Space Program Elements............................................................................. 19
Introduction .............................................................................................................................. 19
Elements of the confined space program................................................................................. 19
Workplace Evaluation Procedures- What is the written plan? ................................................ 19
Identify Confined Spaces .......................................................................................................... 20
Warning signs............................................................................................................................ 20

Hazard identification procedures ............................................................................................. 21
Procedures and practices.......................................................................................................... 22
Entry permit system.................................................................................................................. 22
Employee training for authorized entrants, attendants, and entry supervisors...................... 22
Controlling confined space hazards.......................................................................................... 22
Equipment and Resources for safe entry ................................................................................. 23
A measurement system ............................................................................................................ 23
Confined Space Rescue Plan..................................................................................................... 23
Annual Program Evaluation ...................................................................................................... 24
Module 2 Quiz........................................................................................................................... 25
Module 3: The Confined Space Entry Permit................................................................................ 27
Purpose of Confined Space Entry Permit.................................................................................. 27
Sections of the entry permit..................................................................................................... 27
Permit validity........................................................................................................................... 28
Cancelling entry permits........................................................................................................... 28
Entry permit maintenance........................................................................................................ 28
Sample Permit........................................................................................................................... 29
Module 3 Quiz........................................................................................................................... 30
Module 4: Confined Space Atmospheric Hazards ........................................................................ 32
Introduction .............................................................................................................................. 32
Confined space hazard categories............................................................................................ 32
Hazardous atmospheres........................................................................................................... 32

Acceptable atmospheric conditions ......................................................................................... 33
Oxygen deficiency..................................................................................................................... 33
Oxygen enrichment................................................................................................................... 34
Combustible and flammable gases........................................................................................... 35
Lower Flammability Limits (LFL) and Lower Explosive Limits (LEL} .......................................... 35
Upper Explosive Limit (UEL) and Upper Flammability Limit (UFL)............................................ 35
Flammable Range...................................................................................................................... 36
Combustible dust atmospheres................................................................................................ 37
Toxic atmospheres.................................................................................................................... 37
Irritant/Corrosive Atmospheres................................................................................................ 38
Examples of Corrosives......................................................................................................... 39
The Material Safety Data Sheet (MSDS)................................................................................... 39
Monitoring and testing for hazardous atmospheres................................................................ 39
The "OFT" order of testing in confined spaces......................................................................... 40
Atmosphere Sampling Procedure............................................................................................. 40
Direct-reading testing instruments........................................................................................... 42
Purchasing monitoring equipment........................................................................................... 42
What does "immediately dangerous to life or health" (IDLH) mean?...................................... 42
Permissible Exposure Limits (PELs)........................................................................................... 43
Module 4 Quiz........................................................................................................................... 44
Module 5: Non-Atmospheric Hazards .......................................................................................... 46
Types of physical hazards encountered in confined spaces..................................................... 46

Mechanical Hazards.................................................................................................................. 46
Skin Contact Hazards ................................................................................................................ 47
Limited Access Hazards............................................................................................................. 47
Slip and Trip Hazards................................................................................................................. 47
Fall Hazards............................................................................................................................... 48
Personal Fall Protection System ............................................................................................... 48
Work Environment Temperature Related Hazards .................................................................. 49
Communication Problems ........................................................................................................ 50
Excessive Noise Hazards ........................................................................................................... 50
High-Pressure Hazards.............................................................................................................. 51
Electrical Hazards...................................................................................................................... 52
Vibration ................................................................................................................................... 52
Impact Hazards ......................................................................................................................... 53
Entrapment hazards.................................................................................................................. 54
Engulfment................................................................................................................................ 54
General/Physical ....................................................................................................................... 54
Module 5 Quiz........................................................................................................................... 56
Module 6: Controlling Confined Space Hazards........................................................................... 58
Introduction .............................................................................................................................. 58
Confined space engineering controls ....................................................................................... 58
Confined space administrative controls ................................................................................... 59
Personal protective equipment (PPE)....................................................................................... 59

Primary control for toxic atmospheres..................................................................................... 59
Ventilating confined spaces...................................................................................................... 59
Considerations to ensure proper ventilation ........................................................................... 60
Respiratory protection.............................................................................................................. 60
Confined Space Inspections...................................................................................................... 61
Module 6 Quiz........................................................................................................................... 63
Module 7: The Confined Space Entry Team ................................................................................. 65
Management responsibilities ................................................................................................... 65
Confined Space Entry Supervisor responsibilities .................................................................... 65
Confined Space Entrant responsibilities................................................................................... 66
Confined Space Attendant responsibilities............................................................................... 67
Confined Space Rescue Team responsibilities?........................................................................ 67
Module 7 Quiz........................................................................................................................... 69
Module 8: Confined Space Rescue ............................................................................................... 71
Introduction .............................................................................................................................. 71
Why confined spaces kill so many people................................................................................ 71
Confined space emergencies.................................................................................................... 71
Preventing confined space rescuer fatalities............................................................................ 72
Confined space rescue training topics...................................................................................... 72
Three rescue strategies............................................................................................................. 72
Informing rescuers.................................................................................................................... 73
The rescue plan......................................................................................................................... 74

Rescue Simulations ................................................................................................................... 74
Re-evaluating rescue plans....................................................................................................... 74
Verifying the availability of the off-site rescue service ............................................................ 75
Entry vs. Non-Entry................................................................................................................... 76
Rescue equipment .................................................................................................................... 76
Using the full body harness and retrieval lines......................................................................... 76
Module 8 Quiz........................................................................................................................... 78
Module 9: Confined Space Training Requirements...................................................................... 80
Introduction .............................................................................................................................. 80
Confined space training triggers............................................................................................... 80
General Training Topics ............................................................................................................ 80
Specific Training........................................................................................................................ 81
Training for Attendants............................................................................................................. 81
Training for Emergency Response Personnel ........................................................................... 81
Verification of Training ............................................................................................................. 82
Module 9 Quiz........................................................................................................................... 83

Course Introduction
Many workplaces contain spaces that are considered to be
"confined" because their configurations hinder the activities of
employees who must enter into, work in or exit from them. In
many instances, employees who work in confined spaces also face
increased risk of exposure to serious physical injury from hazards
such as entrapment, engulfment and hazardous atmospheric
conditions. Confinement itself may pose entrapment hazards and
work in confined spaces may keep employees closer to hazards
such as machinery components than they would be otherwise. For
example, confinement, limited access and restricted airflow can
result in hazardous conditions that would not normally arise in an
open workplace. Keep in mind: Most permit-space accidents
happen for the following reasons:
• Workers haven’t been properly trained to recognize permit-
space hazards.
• Hazards aren’t eliminated or controlled before workers
enter the space.
• Rescuers are inexperienced or improperly trained.
Course Goals
This course has been developed to explain the hazards of confined
space work and to assist employers in establishing and maintaining
an effective confined space program. By implementing such a
program, your employees will be able to:
• Recognize, evaluate, and control confined space hazards.
• Save lives and protect employees from job-related injuries and illnesses.
• Promote safe and effective work practices.
• Reduce preventable workers’ compensation costs
• Comply with company procedures and practices
This course provides a general overview of a particular topic related to OSHA standards. It does
not alter or determine compliance responsibilities in OSHA standards or the Occupational

Safety and Health Act of 1970. Because interpretations and enforcement policy may change
over time, you should consult current OSHA administrative interpretations and decisions by the
Occupational Safety and Health Review Commission and the Courts for additional guidance on
OSHA compliance requirements.

Module 1: Confined Space Basic Concepts
Introduction
In order to fully understand the information offered in this course, you must first understand
the terms used. So, let's take a look at some important definitions for common confined space
terms used by most industries and regulatory agencies.
What is a confined space?
That depends on where you're working.
In the United States, a confined space is defined by OSHA as a space that meets all of the
following three criteria:
1. The space is large enough and configured such that an employee can bodily enter and
perform work;
2. The space has limited means of entry (access) and exit (egress), which means you need
to use your hands or contort your body to enter the space; and
3. The space is not designed for continuous employee occupancy.
In Canada, each province may have their own definition of a "confined space," and each of
these definitions may be slightly different from OSHA's definition in the U.S. Generally,
regulatory agencies in Canada define a confine as having the following three characteristics:
1. It is a fully or partially enclosed space, and
2. It is not both designed and constructed for continuous human occupancy, and
3. It is a space in which atmospheric hazards may occur because of its construction,
location or contents or because of work that is done in it.

What is the difference between these two definitions?
• In the United States, a confined space must be large enough for bodily entry. In Canada,
the size of the space doesn't matter. Therefore we may assume it must be large enough
for part of the body, like the head, to enter. Actually workers have been killed in
confined space after only sticking their heads through a hatch or lid. Workers have also
been killed in rather shallow trenches. To have a fatal confined space accident, all it
takes is a trench or ditch a couple of feet (or a meter) in depth, and a heavier-than-air
hazardous atmosphere.
• To be considered a confined space in the United States, the space must have limited
access or egress. There is no such requirement in Canada. Examples of limited access are
hatches or covers.
• In both the U.S. and Canada, a confined space must not be designed for
human/employee occupancy.
• And finally, in Canada the space must have the potential for developing a hazardous
atmosphere. In the United States, this requirement is not included in the definition.
In this course, we will focus on confined space entry as defined by OSHA in the USA.
Reasons for Entering Confined Spaces
Entering a confined space may be done for various reasons. It is done usually to perform a
necessary function, such as inspection, repair, maintenance (cleaning or painting), or similar
operations which would be an infrequent or irregular function of the total industrial activity.
Entry may also be made during new construction. One of the most difficult confined space
entries to control is that of unauthorized entry, especially when there are large numbers of
workers and trades involved, such as welders, painters, electricians, and safety monitors.
A final and most important reason for entry would be emergency rescue. This, and all other
reasons for entry, must be well planned before initial entry is made and the hazards must be
thoroughly reviewed.

Permit-required confined spaces (PRCS)
By definition, a permit-required confined space is a space that meets the criteria for a confined
space and has one or more of these characteristics:
1. Contains or has the potential to contain a hazardous atmosphere; or
2. Contains a material with the potential to engulf someone who enters the space; or
3. Has an internal configuration that might cause an entrant to be trapped or asphyxiated
by inwardly converging walls or by a floor that slopes downward and tapers to a smaller
cross section; or
4. Contains any other recognized serious safety or health hazards.
See the Confined Space Entry Decision Flow Chart to help you determine if your confined
spaces need a permit.
Examples of confined spaces that could become permit spaces
Most confined spaces are designed to hold substances such as liquids, gases, and loose
materials, or to house equipment. They come in many sizes and shapes, though most can be
classified in one of two ways: those with depth and open tops and those with narrow openings.
These are examples of each:
• Open-topped Spaces with and deep spaces narrow openings
• Pits
• Ship compartments
• Wells
• Silos
• Vats
• Pipes
• Hoppers
• Tunnels
• Bins
• Tanks
• Degreasers
• Casings
• Kettles
• Sewers

Where confined spaces are found
Confined spaces are found not only in industrial settings
but also in public places such as shopping malls and large
public swimming pools. Waterfalls and water fountain
displays used in malls for beautification may have pump
vaults or valve pits that are seldom entered. Some
swimming pool pumps are placed in vaults below ground.
There have been reports of maintenance employees
entering these areas and losing consciousness.
Take a look at this discussion that includes examples of where confined spaces are found in
construction...
Why confined spaces are hazardous to entrants
By nature, confined spaces can be hazardous due to:
• Space configurations such as small openings and inwardly converging walls, which can
trap an entrant, restrict easy entry and exit, or impede rescue.
• Atmospheric hazards such as gasoline tank vapors, combined with limited ventilation.
Such conditions can cause asphyxiation or explosion.
• Physical hazards, such as unstable grain contained in silos, which can engulf a worker.
• All other serious hazards associated with general industry, such as electrical equipment,
moving machinery, falling objects, and wet or slippery surfaces.
Below is a list of potential hazards.
• No ventilation (pits and vaults seldom opened).
• Leaking chlorine gas (which is heavier than air) can accumulate in low-lying spaces.
• Oxygen depletion can be caused by:
o Rotting vegetation and decaying dead animals.
o Corroding or rusting machinery.
Read these actual confined space accident summaries to learn more about the dangers of
confined spaces.

What is confined space “entry”?
A confined space entry is considered to have occurred when any part of a person's body crosses
the plane of an opening into the space.
Is confined space entry always necessary, or is it possible to complete the task from the outside?
Each employer should ask these two questions at the onset of each project. If possible, avoid
entering a confined space. Every consideration should be given to completing the task from the
outside.
Using alternative entry procedures
Under certain conditions, you may use alternate procedures for worker entry into a permit
space. For example, if you can demonstrate with monitoring and inspection data that the only
hazard is an actual or potential hazardous atmosphere that can be made safe for entry using
continuous forced air ventilation, you may be exempted from some entry requirements, such as
permits and attendants. However, even in these circumstances, you must test the internal
atmosphere of the space for oxygen content, flammable gases and vapors, and the potential for
toxic air contaminants before any employee enters it. You must also provide continuous
ventilation and verify that the required measurements are performed before entry.

Flow Chart

Module 1 Quiz
Use this quiz to self-check your understanding of the module content. You can also go online
and take this quiz within the module. The online quiz provides the correct answer once
submitted.
1. Which of the following is not one of the three OSHA-defined criteria of a confined space?
a. large enough for a person to enter and work
b. has limited entry and exit
c. contains a ladder and hatch for entry
d. is not designed for continuous occupancy
2. One of the most difficult confined space entries to control is that of ______________ entry.
a. Unplanned
b. Unauthorized
c. Unknown
d. Unpredictable
3. Which of the following is one of the four characteristics of a permit-required confined
space?
a. has the potential to engulf someone outside the space
b. does or may contain any level of noise
c. has outwardly converging walls
d. does or may contain a hazardous atmosphere
4. A confined space entry is considered to have occurred when any part of a person's body
crosses the plane of an opening into the space.
a. True
b. False

5. When using alternative confined space entry procedures, you must test the
______________ of the space.
a. configuration
b. access/egress difficulty
c. structural integrity
d. internal atmosphere

Module 2: Confined Space Program Elements
Introduction
Now that we've covered some of the basic concepts we'll discuss the various components of a
confined space entry program. If you allow employees entry into a permit space, you must
develop and implement a written plan as part of your confined space entry program.
Elements of the confined space program
An effective confined space program will contain many important elements. Each of the
elements should be describe in a written plan that includes a permit system. The items on the
permit address the components of your written plan to ensure safety and health of all involved!
Workplace Evaluation Procedures- What is the written plan?
The written plan is an important element of the Confined Space Program because it helps to
clarify what everyone is supposed to do and how to do it (a recurring theme). If everyone
understands their duties and responsibilities, and is able to perform in a professional manner,
the likelihood of serious accidents will decrease significantly. The written confined space safety
plan should address the following:
• Identification of confined spaces
• Evaluation of permit spaces and hazards
• Development & implementation of safe entry operations
• Providing and maintaining all necessary equipment (PPE, monitors, etc.)
• Evaluating permit space conditions before & during entry operations
• Confined space entry team duties (authorized entrants, attendants, entry supervisors)
• Procedures for multiple spaces
• Confined space entry and rescue training
• Rescue & emergency procedures
• Entry permit procedures (issue, use, cancel)
• Measures implemented to prevent unauthorized entry
• Multi-employer entry procedures
• Procedures for concluding the entry (closing off the space)

• Review & evaluation of entry operations during the year (as needed)
• Annual permit space program review using the historic permits
Identify Confined Spaces
The first step in confined space program development is to identify confined spaces. Next,
evaluate each confined space to determine if it is a permit space. Keep in mind, permit space
has one or more of the characteristics listed below.
1. Contains - or could contain - an atmospheric hazard.
2. Contains material that could trap or bury an entrant.
3. Is shaped such that an entrant could become trapped or asphyxiated.
4. Contains any other safety or health hazard that could harm an entrant.
Take a look at the Confined Space Decision Tree to help determine if you have permit or non-
permit confined spaces.
Warning signs
If a workplace contains permit spaces, the employer must inform exposed employees of their
existence, location and the hazards they pose. When your employees will not enter confined
spaces, you must place warning signs that prohibit entry and
take other effective measures that prevent them from entering
confined spaces. This can be done by posting danger signs such
as "DANGER -- PERMIT-REQUIRED CONFINED SPACE --
AUTHORIZED ENTRANTS ONLY" or using an equally effective
means.
Usually "effective measures" means making sure employees
can't get into the confined space without unlocking or unbolting
a hatch. It should not be easy to get in to a confined space.
Hatches and covers must be relatively difficult to open.

Hazard identification procedures
Identify and evaluate permit space hazards before allowing employee entry. This should be
done initially and prior to each entry if the space is designated a confined space. You must
identify all existing or potential hazards in each permit space at your workplace. Those who
enter permit spaces face two kinds of hazards: atmospheric and non-atmospheric. Atmospheric
hazards affect the air in the space and can be flammable, toxic, corrosive, or asphyxiating.
Test atmospheric conditions in the permit space before entry operations and monitor the space
during entry. Always test the atmosphere as most confined space injuries and fatalities are
caused by hazardous atmospheres. Be especially careful when evaluating a space that could
contain an atmospheric hazard! The only way to identify an atmospheric hazard is to test for it
from outside the space.
Perform appropriate testing for the following atmospheric hazards in this sequence: oxygen,
combustible gases or vapors, and toxic gases or vapors. Remember "O-F-T" and you can't go
wrong.
Always test for atmospheric hazards in the following order:
1. O- oxygen deficiency, enrichment or displacement
2. F - flammable or explosive atmospheres
3. T - toxic or corrosive atmospheres
Never assume a confined space is hazard-free. Non-atmospheric hazards include conditions
such as:
• mechanized equipment
• loose materials
• excessive noise
• extreme temperatures
• low light
• difficult access
• psychological stress

Procedures and practices
Once you analyze and determine the hazards and nature of the external and internal
environment, you must develop procedures and practices to make sure the work is safe.
Establish and implement the means, procedures and practices to eliminate or control hazards
necessary for safe permit space entry operations. Have ways to eliminate the hazards if they're
detected. Identify employee job duties. Entry supervisors, attendants and authorized entrants
must know their jobs. We'll cover all of these topics in future modules.
Review established entry operations annually and revise the permit space entry program as
necessary. An annual review and refresher training is important. Practice rescue if you have a
team at least annually.
Entry permit system
Establish, in writing, and implement a system for the preparation, issue, use and cancellation of
entry permits. If it meets the requirements for a permit, you must complete the permit before
entry. An entry permit must be developed and used for each entry into a permit-required
confined space.
Employee training for authorized entrants, attendants, and entry supervisors
You must train entry procedures and practices for the specific space being entered. The training
must specify confined space entry team (supervisor, attendant, and entrant) duties and
responsibilities. Ensure that at least one attendant is stationed outside the permit space for the
duration of entry operations. Coordinate entry operations when employees of more than one
employer are working in the permit space. Typically the Entry Supervisor does this. You'll read
more about confined space entry team duties and responsibilities in Module 7.
Controlling confined space hazards
Your written confined space plan should establish the means, procedures and practices to
eliminate or control hazards necessary for safe permit space entry operations. These may
include:
• Specifying acceptable entry conditions;
• Isolating the permit space;
• Providing barriers;
• Verifying acceptable entry conditions; and

• Purging, making inert, flushing or ventilating the permit space.
Equipment and Resources for safe entry
The employer must provide and maintain, at no cost to the employee, confined space entry
tools, equipment, materials and whatever it takes to make sure they are safe while working in a
confined space. The employer must also insist that employees use the confined space entry
equipment they have been provided. Don't do confined space entry "on the cheap" as it could
kill a worker. A quality personal protective equipment program will pay for itself in the long
term.
Once again, providing work equipment and PPE at no cost to employees is an absolute must do.
In addition to personal protective equipment, other equipment that employees may require for
safe entry into a permit space includes:
• Testing, monitoring, ventilating, communications and lighting equipment;
• Barriers and shields;
• Ladders; and
• Retrieval devices.
A measurement system
You must develop and deploy a system to ensure that pre-entry testing is performed, pre-entry
preparation is completed, and acceptable conditions are attained. Typically a periodic audit of
the confined space entry plan, procedures, and observation of practices will help to continually
improve the confined space program.
Confined Space Rescue Plan
Implement appropriate procedures for summoning rescue and emergency services, and
preventing unauthorized personnel from attempting rescue. You're either going to have your
own rescue team, or rely on a 911 emergency rescue service. If your company doesn't rely on
emergency responders (911 system), you must develop and deploy your own rescue team. The
rescue team must be trained, and practice drills should be conducted at least annually.
Implement the procedures that any attendant who is required to monitor multiple spaces will
follow during an emergency in one or more of those spaces. The attendant must be able to

perform "non-entry" rescue. The attendant is not supposed to enter the confined space to
rescue a worker. Most confined space fatalities are rescuers!
Annual Program Evaluation
It's important to review and evaluate the components of the confined space entry program.
Make sure you review established entry operations annually and revise the permit space entry
program as necessary. Evaluate the written plan and the procedures to see how well they work.
To do that, make sure you observe confined space entry procedures, interview confined space
team members, and review permits and training records.

Module 2 Quiz
submitted.
1. A confined space written plan is important because it helps to ______________.
a. establish fault
b. complicate perceptions
c. clarify duties and responsibilities
d. simplify procedures and practices
2. According to the text, what is the first step in confined space program development?
a. contact OSHA
b. identify confined spaces
c. evaluate permit space hazards
d. train rescuers
3. Which of the following are considered effective measures to prevent unauthorized entry
into a confined space?
a. tagging or posting signs on hatches
b. tagging or latching hatches
c. tagging or locking hatches
d. locking or bolting hatches
4. Which of the following is the correct order for testing atmospheric hazards prior to entry
into a confined space?
a. O-F-T
b. F-O-T
c. T-F-O
d. O-T-F

5. Evaluating the confined space program may be conducted by _____________.
a. observing procedures
b. reviewing permits
c. interviews
d. all of the above

Module 3: The Confined Space Entry Permit
Purpose of Confined Space Entry Permit
An entry permit is a document prepared by the
employer or employer representative. It is designed to
be used as a checklist to document the completion of all
steps necessary to prepare for safe entry and work in a
confined space.
The entry supervisor must sign the entry permit to:
1. ensure that acceptable conditions have been attained in the permit space and
2. authorize entry.
Further, you must post the permit near the confined space entry for entrants to verify that pre-
entry procedures have been completed.
Sections of the entry permit
The entry permit must include:
• The location of the permit space to be entered. The specific location with the facility or
site should be noted.
• The purpose of the entry. The permit must state the specific purpose of the work being
performed.
• The date and the authorized duration of the entry permit. The permit must indicate
when and how long the work is going to occur.
• The names of authorized entrants, attendants, and entry supervisors. The permit must
list all workers who will be working within the space, attending to the workers, and the
person supervising the entry.
• The hazards of the permit space. All hazards (electrical, mechanical, environmental, etc.)
must be listed.
• The measures used to eliminate, isolate, or control permit space hazards before entry.
The permit must list the procedures used to totally eliminate a hazard, isolate the space
from hazards, or control the hazards. Lockout, block out, and ventilation are common
measures.

• The acceptable entry conditions. The permit must list acceptable LELs, PELs, etc.
• The results of initial and periodic tests performed, along with the names of the testers
and when these tests were performed.
• The verified rescue and emergency services to be summoned. Enter the on-site or off-
site rescue services.
• The communication system. List the type of equipment that will be used to make sure
direct communication is available.
• The equipment to be used during entry. Tools, equipment, personal protective
equipment, electrical protective equipment, fall protection, etc., must be listed.
• Any additional information necessary to ensure employee safety.
• Any additional permits issued to authorize special work in the space. For example, a Hot
Work Permit may be required.
Permit validity
The entry permit is valid once it has been signed by the entry supervisor. An entry permit is
valid for more than one shift if it contains adequate information and the following criteria is
met:
• Names of all involved employees (entry team plus next shift).
• Clearly delineated transfer of responsibilities from one shift to another.
• Acceptable entry conditions are maintained.
• Entry operations remain consistent with terms of the entry permit.
Cancelling entry permits
The entry supervisor must cancel entry permits when an assignment is completed or when new
conditions exist. New conditions must be noted on the canceled permit and used in revising the
permit space program. The OSHA confined space standard requires that the employer keep all
canceled entry permits for at least one year.
Entry permit maintenance
The entry permit should be kept on file for one year. The annual review of canceled permits
allows employers to assess and revise, if needed, their permit space program to ensure that
confined space workers are protected from space hazards. See below for a sample permit:

Sample Permit

Module 3 Quiz
submitted.
1. Which of the following is a purpose for the confined space entry permit?
a. used as a checklist
b. documents entry preparation steps
c. helps prepare team for safe entry
d. all of the above
2. Which of the following is not a required section on the confined space entry permit?
a. hazards of the confined space
b. name of the company safety manager
c. equipment to be used during entry
d. verified rescue and emergency services
3. Who must sign the entry permit before it is considered valid?
a. department supervisor
b. safety officer
c. attendant
d. entry supervisor
4. The entry supervisor must cancel entry permits when an assignment is completed or when
new conditions exist.
a. True
b. False

5. The OSHA confined space standard requires that the employer keep all canceled entry
permits for at least _______.
a. one year
b. two years
c. three years
d. five years

Module 4: Confined Space Atmospheric Hazards
Introduction
Many confined space accidents occur because the workers did not realize the dangers or
potential dangers within or nearby the space. Workers may not take into account the new
hazards and other conditions created during work in confined spaces. Thus, it is crucial to
carefully identify all confined space hazards before entering a space.
Confined space hazard categories
Usually, confined space incidents are caused by multiple factors. There are two primary
categories of hazards:
1. Atmospheric, or those that involve problems with the air in the space (lack of oxygen,
the presence of other gases in the space, etc.) and
2. Non-atmospheric, physical, or those hazards that are caused either by equipment
(rotors, sparks, etc.) or by other dangerous conditions (slippery surfaces, heat, etc.).
It is critical that you identify all the hazards in a space and determine how they can impact the
health and safety of workers who enter this space.
Hazardous atmospheres
A hazardous atmosphere is any atmosphere that may incapacitate, injure, or impair an
employee’s self-rescue or lead to acute illness or death to workers and rescuers who enter
confined spaces.
The following are examples of hazardous atmospheres within a confined space:
• Flammable or explosive gas, vapor, or mist in a concentration greater than 10 percent of
its lower flammable limit (LFL) or lower explosive limit (LEL).
• Combustible dust suspended in air, which obscures vision at a distance of five feet or
less.
• Atmospheric oxygen concentration levels below 19.5 percent or above 23.5 percent at
sea level.
• Atmospheric concentration of any substance with an acutely toxic effect above its PEL,
and any other atmospheric condition that is IDLH.

This does not include atmospheric concentrations of substances that are not capable of causing
death, incapacitation, impairment of ability to self-rescue, injury, or acute illness.
Acceptable atmospheric conditions
For guidance, refer to sources of information such as a Material Safety Data Sheet (MSDS) that
comply with published scientific and industry information, and National Consensus Standards
from organizations such as the American
Conference of Governmental Industrial
Hygienists (ACGIH) and the National Institute for
Occupational Safety and Health (NIOSH).
Oxygen deficiency
The normal atmosphere is composed
approximately of 20.9% oxygen and 78.1%
nitrogen, and 1% argon with small amounts of
various other gases.
• Oxygen deprivation is one form of
asphyxiation. While it is desirable to
maintain the atmospheric oxygen level at
21% by volume, the body can tolerate
deviation from this ideal.
• When the oxygen level falls to 17%, the
first sign of hypoxia is a deterioration of
night vision which is not noticeable until a normal oxygen concentration is restored.
Physiologic effects are increased breathing volume and accelerated heartbeat.
• Between 14-16% physiologic effects are increased breathing volume, accelerated
heartbeat, very poor muscular coordination, rapid fatigue, and intermittent respiration.
• Between 6-10% the effects are nausea, vomiting, inability to perform, and
unconsciousness.
• Less than 6%, spasmodic breathing, convulsive movements, and death in minutes.
Reduction of oxygen in a confined space may be the result of either consumption or
displacement.

• The consumption of oxygen takes place during combustion of flammable substances, as
in welding, heating, cutting, and brazing. A more subtle consumption of oxygen occurs
during bacterial action, as in the fermentation process. Oxygen may also be consumed
during chemical reactions as in the formation of rust on the exposed surface of the
confined space (iron oxide). The number of people working in a confined space and the
amount of their physical activity will also influence the oxygen consumption rate.
• A second factor in oxygen deficiency is displacement by another gas. Examples of gases
that are used to displace air, and therefore reduce the oxygen level are helium, argon,
and nitrogen. Carbon dioxide may also be used to displace air and can occur naturally in
sewers, storage bins, wells, tunnels, wine vats, and grain elevators.
Aside from the natural development of these gases, or their use in the chemical process, certain
gases are also used as inerting agents to displace flammable substances and retard pyrophoric
reactions. Gases such as nitrogen, argon, helium, and carbon dioxide, are frequently referred to
as non-toxic inert gases but have claimed many lives.
The use of nitrogen to inert a confined space has claimed more lives than carbon dioxide. The
total displacement of oxygen by nitrogen will cause immediate collapse and death. Carbon
dioxide and argon, with specific gravities greater than air, may lie in a tank or manhole for
hours or days after opening. Since these gases are colorless and odorless, they pose an
immediate hazard to health unless appropriate oxygen measurements and ventilation are
adequately carried out.
Oxygen enrichment
Oxygen enrichment refers to air containing more than 23.5 percent oxygen. This dangerous
condition is an extreme fire hazard in which static electricity from materials such as hair or
clothing can provide the ignition source needed to start a fire. This environment also allows any
fire to burn more readily. Oxygen enrichment does not occur naturally and should be
investigated.
Oxygen enrichment can be caused by leaking oxygen cylinders or hoses that have been brought
into or near the space. Always ventilate confined spaces with normal, ambient air. Never use
pure oxygen.

Combustible and flammable gases
Atmospheres containing combustible or flammable gases or vapors can be dangerous because
of the threat of fire and explosion.
Three ingredients are necessary for an atmosphere to become flammable or explosive:
1. an ignition source (heat or flame),
2. fuel (combustible gas or vapor), and
3. oxygen.
However, the proportions of fuel and oxygen in a mixture must be within the flammable range
for this mixture to be readily ignitable.
Lower Flammability Limits (LFL) and Lower Explosive Limits (LEL}
The lower explosive limit, or LEL, is the lowest atmospheric concentration of fuel in the fuel-air
mixture at which a gas or vapor can explode (the lower flammable limit, or LFL, is the lowest
concentration at which the gas or vapor will burn). Fuel concentrations below the LEL and LFL
are too lean and will not explode or burn.
Upper Explosive Limit (UEL) and Upper Flammability Limit (UFL)
The highest atmospheric concentration of a gas or vapor in the fuel-air mixture that can
explode is called the upper explosive limit, or UEL. Above this concentration, the mixture will
not explode because it is too rich (the mixture has too much fuel). The UFL is the maximum fuel
concentration above which the mixture will not burn.
The composition of a fuel vapor and air mixture can change over time and may fluctuate within
a confined space. Fluctuations occur because the fuel-air mixture moves around the space,
particularly when people or other things create air currents that disturb the atmosphere.
Consequently, the mixture is not uniformly distributed within the space.

Flammable Range
Gases or vapors can only be combustible or explosive between their LEL and UEL. This is called
the flammable range. Substances with a wide flammable range are considered to be more
hazardous since they are readily ignitable over a wider range. However, any concentration of
combustible gas or vapor should be of serious concern in a confined space. Workers should be
especially careful when ventilating a space containing a gas or vapor above its UEL. In order to
reduce the concentration below the LEL, this procedure will first bring the gas or vapor within
its flammable range.

Combustible dust atmospheres
Finely powdered dust from combustible materials such as wood, metal, or grain can be fuel for
powerful explosions. Dust clouds can develop as result of handling dusty materials or when
solid materials are reduced to smaller particles from processes such as grinding, drilling, or
crushing.
Airborne combustible dust at an explosive concentration would obscure vision at a distance of
five feet (1.52 meters) or less. A direct reading instrument may be used to measure actual dust
concentrations.
Toxic atmospheres
Substances regarded as toxic in a confined space can cover the entire spectrum of gases,
vapors, and finely-divided airborne dust in industry. Toxic gases may be present in a confined
space because:
• toxic substances are used as part of the production process, (for example, in producing
polyvinyl chloride, hydrogen chloride is used as will as vinyl chloride monomer, which is
carcinogenic).
• the biological and chemical "breakdown" of the product being stored in a tank, or
• maintenance activities (welding) being performed in the confined space.
Four common types of toxic gases encountered in confined spaces are:
1. Hydrogen Sulfide (H2S) - "sewer gas" a colorless gas with the odor of rotten eggs.
Excessive exposure has been linked to many confined space deaths. Hydrogen sulfide
causes a loss of our sense of smell, causing people to mistakenly think that the gas has
left the space. Hydrogen sulfide inhibits the exchange of oxygen on the cellular level and
causes asphyxiation.
2. Carbon monoxide (CO) - is an odorless, colorless gas that is formed by burning carbon
based fuels (gas, wood). Carbon monoxide inhibits the body's ability to transport oxygen
to all parts of the body.
3. Methane (CH4) is a natural gas produced from the decay of organic matter. It is a
flammable, explosive, colorless, and odorless gas. It can displace oxygen to the point of
oxygen deficiency in a confined space, causing dizziness, unconsciousness, and
asphyxiation.

4. Solvents - many solvents, such as kerosene, gasoline, paint strippers, degreasers, etc.
are not only flammable, but if inhaled at high concentrations can cause central nervous
system (CNS) effects. CNS effect can include dizziness, drowsiness, lack of concentration,
confusion, headaches, coma and death. (Source: University of South Carolina)
Remember, atmospheric changes may occur due to the work procedure, the product stored, or
a nearby gas line leak. The atmosphere may be safe upon entry, but can change very quickly.
• The work performed within the confined space (such as welding, degreasing, painting,
or sanding) may produce toxic atmospheres.
• Toxic gases and vapors from adjacent areas can migrate to and collect in the confined
space.
• Vapors may be released from the sludges on the bottom or scales on walls of emptied
confined spaces, such as storage tanks, that previously contained flammable or toxic
chemicals. Vapor release may be accelerated by wall scraping and sludge removal from
confined spaces.
Confined spaces prevent toxic substances from escaping, diluting, or readily dissipating.
Instead, substances can become trapped and a buildup occurs, whereby the concentrations of
toxic substances reach dangerous levels.
The atmosphere inside a confined space can change rapidly and unexpectedly. Also, any
ignition source (such as sparks from grinding or welding equipment, static electricity, or
unapproved electrical equipment that is not non-sparking or even smoking) can initiate an
explosion.
Irritant/Corrosive Atmospheres
Irritant or corrosive atmospheres can be divided into primary and secondary groups.
1. The primary irritants exert no systemic toxic effects (effects on the entire body).
Examples of primary irritants are chlorine, ozone, hydrochloric acid, hydrofluoric acid,
sulfuric acid, nitrogen dioxide, ammonia, and sulfur dioxide.
2. A secondary irritant is one that may produce systemic toxic effects in addition to surface
irritation. Examples of secondary irritants include benzene, carbon tetrachloride, ethyl
chloride, trichloroethane, trichloroethylene, and chloropropene.

Irritant gases vary widely among all areas of industrial activity. They can be found in plastics
plants, chemical plants, the petroleum industry, tanneries, refrigeration industries, paint
manufacturing, and mining operations.
Prolonged exposure at irritant or corrosive concentrations in a confined space may produce
little or no evidence of irritation. This may result in a general weakening of the defense reflexes
from changes in sensitivity. The danger in this situation is that the worker is usually not aware
of any increase in his/her exposure to toxic substances.
Examples of Corrosives
• Bleach
• Ammonia
• Acids
The Material Safety Data Sheet (MSDS)
To find out information on the hazardous substances used in a confined space, read the
product label and/or the MSDS. Labels provide general product information, and the MSDS
gives useful information on proper use and handling, special precautions, and first aid
treatment. When a chemical product is purchased, the manufacturer or supplier of the product
provides an MSDS. The MSDS must be readily available to any employee who wishes to learn
about a product that he or she comes into contact with. If you have any questions, contact your
safety Department, the manufacturer or supplier of the product, the NIOSH Pocket Guide to
Chemical Hazards, or a consultant. Here is a sample MSDS
Monitoring and testing for hazardous atmospheres
Atmospheric testing is required for two distinct purposes:
1. Evaluation of the hazards of the permit space, and
2. Verification that acceptable entry conditions for entry into that space exist
Continual monitoring in confined spaces is necessary because there are unseen and odorless
contaminants (or oxygen-deficient atmospheres) that can kill or incapacitate workers.
Monitoring is the only way to detect whether a hazardous atmosphere has developed during
entry. If this is the case, employees will be alerted to the change so they can leave the space
immediately.

Of those contaminants that have odor, some can be detected by our senses only at low
concentration. Hydrogen sulfide, for example, will deaden the sense of smell at high
concentrations. Because of this, employees might assume that a confined space is safe when it
is not. There is no substitute for testing the air in a confined space prior to entry. A worker can
also be exposed to a contaminant through skin contact while working in a confined space.
Atmospheric monitoring is necessary whenever:
• A safe atmosphere cannot be ensured.
• An existing hazardous atmosphere cannot be removed.
• The confined space cannot be physically isolated from the penetration of hazardous
materials.
• There is reason to suspect the development of a hazardous atmosphere during work
activity.
The "OFT" order of testing in confined spaces
Always test for atmospheric hazards in the following order:
1. Oxygen is tested first because most combustible gas and toxic atmosphere meters are
oxygen-dependent and will not provide reliable readings when used in oxygen-deficient
atmospheres. In addition, both oxygen-deficient and oxygen-enriched atmospheres are
extremely hazardous to workers’ health and safety. Oxygen levels should be between
19.5% - 23.5%.
2. Flammable or explosive gases and vapors are tested next because the threat of fire and
explosion is both more immediate and more life-threatening, in most cases, than
exposure to toxic gases and vapors. Flammability limits should be less than 10% of the
Lower Flammability Limit (LFL)
3. Toxic atmospheres are tested last. Many modern direct-reading instruments provide
simultaneous readings of multiple gases. Readings should be less than recognized ACGIH
exposure limits or other published exposure levels (e.g. OSHA PELs, NIOSH RELs).
Atmosphere Sampling Procedure
The atmosphere of a confined space should be analyzed using equipment of sufficient
sensitivity and specificity to identify and evaluate any hazardous atmospheres that may exist or
arise, so that appropriate permit entry procedures can be developed and acceptable entry
conditions stipulated for that space.

Evaluation and interpretation of this data, and development of the entry procedure, should be
done by, or reviewed by, a technically qualified professional (e.g., OSHA consultation service, or
certified industrial hygienist, registered safety engineer, certified safety professional, certified
marine chemist, etc.) based on evaluation of all serious hazards.
The atmosphere of a permit space should be tested for residues of all contaminants identified
by evaluation testing to determine that residual concentrations at the time of testing and entry
are within the range of acceptable entry conditions.
When monitoring for entries involving a descent into atmospheres that may be stratified, the
atmospheric envelope should be tested a distance of approximately 4 feet (1.22 m) in the
direction of travel and to each side. If a sampling probe is used, the entrant's rate of progress
should be slowed to accommodate the sampling speed and detector response.
Results of testing (i.e., actual concentration, etc.) should be recorded on the permit in the space
provided adjacent to the stipulated acceptable entry condition.

If entrants leave the confined space for any reason, they should once again test the atmosphere
within confined spaces because it can change rapidly.
Test results that show the composition of an atmosphere to which employees are actually
exposed (even if the employees are using respirators) must be available so that they can be
reviewed by members of the entry team or representatives.
Direct-reading testing instruments
Electronic gas detectors and color-indicator gas detector tubes are the most common types of
instruments used for determining oxygen content, lower explosive limit, and toxic
atmospheres.
Purchasing monitoring equipment
The typical confined space gas monitors will offer up to four independent sensors for the
detection of oxygen, combustible gas, carbon monoxide, and hydrogen sulfide. Before
purchasing equipment confined space testing equipment, evaluate the instrument's:
• Accuracy.
• Environmental operating range:
o Remote sampling capability.
o Operating temperature.
o Relative humidity.
• Intrinsic safety for explosive atmospheres.
• Specificity for contaminant of interest.
• Warm-up time.
• Response time.
• Ruggedness.
• Ease of use and maintenance.
• Vendor support.
• Sensor and battery life.
• Data-logging capabilities.
What does "immediately dangerous to life or health" (IDLH) mean?
This term refers to any condition in a permit space that would:
1. Cause irreversible adverse health effects; or

2. Interfere with self-rescue; or
3. Cause immediate or delayed threat to life or health.
Permissible Exposure Limits (PELs)
Permissible exposure limits, or PELs, are occupational exposure standards that refer to the
maximum concentration of airborne chemicals to which nearly all healthy persons can be
exposed day after day without adverse health effects. Workers’ exposure to concentration of
materials in excess of the PEL can result in detrimental health effects, including illness and/or
death.

Module 4 Quiz
submitted.
1. Which of the following are the two primary categories of confined space hazards?
a. psychological and physical
b. falls and tripping
c. electrical and hydraulic
d. atmospheric and non-atmospheric
2. Which of the following is an example of a hazardous atmosphere in a confined space?
a. temperature at 4 deg. C.
b. combustible dust
c. oxygen level at 21% O2
d. concentration of toxic gas below its PEL
3. Which of the following can cause oxygen deficiency in a confined space?
a. a dead rodent
b. formation of rust
c. welding
d. all of the above
4. According to the text, what are the three ingredients necessary for an atmosphere to
become flammable or explosive?
a. ignition source, fuel, oxygen
b. ignition source, heat, air
c. fuel, heat, oxygen
d. oxygen, ignition source, proper sequence

5. Which of the following is not one of the four common types of toxic gases encountered in
confined spaces?
a. Hydrogen Sulfide (H2S)
b. Chlorine (CL)
c. Methane (CH4)
d. Carbon monoxide (CO)

Module 5: Non-Atmospheric Hazards
Types of physical hazards encountered in confined spaces
Hazardous atmospheres are not the only hazards within confined spaces. As we'll see there are
many actual and potential non-atmospheric hazards within confined spaces and we need to be
aware of them to make sure they are eliminated.
Mechanical Hazards
If activation of electrical or mechanical equipment would cause injury, each piece of equipment
should be manually isolated to prevent inadvertent activation before workers enter or while
they work in a confined space.
The interplay of hazards associated with a confined space, such as the potential of flammable
vapors or gases being present, and the build-up of static charge due to mechanical cleaning,
such as abrasive blasting, all influence the precautions which must be taken.
• To prevent vapor leaks, flashbacks, and other hazards, workers should completely
isolate the space.
• To completely isolate a confined space, the closing of valves is not sufficient.
• All pipes must be physically disconnected or isolation blanks bolted in place.
• The pipes blanked or disconnected should be inspected and tested for leakage to check
the effectiveness of the procedure.
• Other areas of concern are steam valves, pressure lines, and chemical transfer pipes.
A less apparent hazard is the space referred to as a void, such as double walled vessels, which
must be given special consideration in blanking off and inerting. Other special precautions must
be taken in cases where flammable liquids or vapors may re-contaminate the confined space.

Skin Contact Hazards
Toxic solvents, chemical removers, and flammable and combustible liquids can harm employees
eyes and skin. Workers should understand the hazards associated with the materials used and
contained in the space. This includes training in accordance with the Hazard Communication
Standard. Hazards may include:
• Organ damage by absorption through the skin or eye.
• Eye or skin irritation.
• Defatting of skin.
Requirements and Example Solutions:
• Use appropriate personal protective equipment (PPE).
• Clean up spills or other releases of flammable, combustible, toxic, corrosive and irritant
materials as work progresses.
• Ensure that washing facilities are available.
Limited Access Hazards
When working in confined or enclosed spaces, egress may be blocked by:
• Improperly located equipment.
• Temporary ventilation ducts and hoses running through the entrance.
• "Interference" such as piping, ventilation ducts, and electrical wiring.
• When employees work in confined or enclosed spaces with limited access, the access
must not be blocked or impeded by ventilation ducts, hoses, or other equipment.
• More than one means of access must be provided where practical.
• Additional openings should be considered for ducts, hoses, and other equipment.
Slip and Trip Hazards
Workers can be exposed to slippery working surfaces and
tripping hazards. This places workers at risk of:
• Slipping off oily and greasy ladders.
• Slipping and falling on oily surfaces.

• Tripping over equipment, hoses, and structures.
• All spills should be cleaned up immediately.
• Visual inspection should be conducted.
• Adequate illumination should be provided.
• Housekeeping should be maintained.
Fall Hazards
Fall hazards are a leading cause of workplace fatalities. Employees are often
required to work in dangerous environments that may include fall hazards.
Accidents involving elevation equipment such as ladders, scaffolds, and aerial
lifts are often serious, even fatal. Here are just a few scenarios where falls
could occur:
• Deck Openings and Edges
• Falls from roof edges
• Falls from floor openings
• Falls into open holes
• Falls from ladders
• Falls from scaffolds
Personal Fall Protection System
If fall hazards are identified through a hazard assessment, employees
must be protected from falls by the use of personal fall protection
equipment including body harnesses and lifelines. Guardrails may be
used to protect workers along floor openings or edges, in lieu of personal
fall protection.

Work Environment Temperature Related Hazards
A thermal hazard is a dangerous condition caused by excessive heat or cold or a hot surface.
Employees engaged in continuous heavy work while wearing PPE (e.g., body suit and respirator)
in warm surroundings are particularly susceptible to thermal hazards. Heat stress may lead to
heat exhaustion, heat cramps, heat stroke, loss of consciousness, or death. A confined space
entry permit must address any hazards from heat or cold within confined spaces. A
combination of PPE use, heat-producing equipment, work activity, and environmental
conditions can cause temperature-related illnesses.
Four factors influence the interchange of heat between people and their environment. They
are:
1. air temperature,
2. air velocity,
3. moisture contained in the air, and
4. radiant heat.
Because of the nature and design of most confined spaces, moisture content and radiant heat
are difficult to control. As the body temperature rises progressively, workers will continue to
function until the body temperature reaches approximately 102o
F. When this body
temperature is exceeded, the workers are less efficient, and are prone to heat exhaustion, heat
cramps, or heat stroke. In a cold environment, certain physiologic mechanisms come into play,
which tend to limit heat loss and increase heat production. The most severe strain in cold
conditions is chilling of the extremities so that activity is restricted. Special precautions must be
taken in cold environments to prevent frostbite, trench foot, and general hypothermia.
Heat-related illnesses include:
• Heat Stress
• Heat Stroke
• Heat Cramps
• Dehydration
Cold-related illnesses include:
• Hypothermia
• Frost Bite

The following precautions for heat-related illnesses are recommended:
• Plenty of fluids
• Frequent breaks
• Ice vest
• Shaded or cooled break areas
• Ventilation
• Awareness training
The following precautions for cold-related illnesses
are recommended:
• Appropriate insulated PPE
• Warming areas for breaks
• Awareness training
Communication Problems
Communication between the worker inside and the
standby person outside is of utmost importance. If the worker should suddenly feel distressed
and not be able to summon help, an injury could become a fatality. Frequently, the body
positions that are assumed in a confined space make it difficult for the standby person to detect
an unconscious worker. When visual monitoring of the worker is not possible because of the
design of the confined space or location of the entry hatch, a voice or alarm-activated explosion
proof type of communication system will be necessary.
Excessive Noise Hazards
Noise problems are usually intensified in confined spaces because the interior tends to cause
sound to reverberate and thus expose the worker to higher sound levels than those found in an
open environment. This intensified noise increases the risk of hearing damage to workers which
could result in temporary or permanent loss of hearing. Noise in a confined space which may
not be intense enough to cause hearing damage may still disrupt verbal communication with
the emergency standby person on the exterior of the confined space. If the workers inside are
not able to hear commands or danger signals due to excessive noise, the probability of severe
accidents can increase.

If noise levels are high, a hearing conservation program may need to be implemented. Use of
tools and equipment may produce high noise levels, which could lead to permanent hearing
loss, and often necessitates a hearing conservation program. Some examples of excessively
loud operations include:
• Use of high-pressure water and steam guns
• Abrasive Blasting
• Needle Gunning
• Scaling
• Grinding
• Hearing protection
• Hearing conservation program
High-Pressure Hazards
The use of high-pressure equipment may expose operators and bystanders to the following
hazards:
• Contact with high-pressure steam, water, grit, or air streams from cleaning equipment.
• Contact with uncontrolled high-pressure hoses.
Injuries associated with these hazards include:
• Loss of body parts (for example, fingers, or hands)
• Lacerations
• Burns
• Loss of sight
• Use appropriate PPE.
• Control access to the area.
• Inspect hoses and connections prior to use.
• Use pressure equipment according to the manufacturer's recommendations.
• Warning: Do not use oxygen for cleaning (blow-off), operation of air tools, or ventilation

Electrical Hazards
Potential Hazards:
All workers who work with electrical equipment in wet or damp locations have an increased risk
of getting shocked or electrocuted due to:
• Faulty electrical connection in power tools.
• Open lighting parts.
• Broken insulation on power cables and cords.
• Portable electrical tools must be grounded or double insulated.
• Temporary lighting must be grounded.
• All electrical tools or equipment should undergo a visual inspection prior to use.
• All portable electric hand tools and temporary lighting systems should utilize Ground
Fault Circuit Interrupters (GFCI).
• Electrical tools and equipment should correspond with the requirements of the job.
• Electrical equipment and tools should be used with proper circuit protection for the
voltage and amperage used.
• Only qualified electricians should attempt to repair electrical tools and equipment.
A Ground Assurance Program should be in place for all electrical tools and equipment used
including:
• Records of tools inspected and repaired.
• Records of electrical boxes inspected and repaired.
• Records of electrical extension cords inspected and repaired.
• Recall of records of the above.
• The requirements of the Ground Assurance Program should be performed on a regular
basis.
Vibration
Whole body vibration may affect multiple body parts and organs depending upon the vibration
characteristics. Segmental vibration, unlike whole body vibration, appears to be more localized

in creating injury to the fingers and hands of workers using tools, such as pneumatic hammers,
rotary grinders or other hand tools which cause vibration.
Impact Hazards
Workers may be exposed to impact hazards from:
• Sparks
• Metal particles
• Grinding debris
• Paint debris
Injuries may include:
• Particles becoming imbedded in the skin
• Eye damage
• Skin burns
• Skin trauma
• Use PPE properly.
• Use powered equipment such as portable grinders with guards and according to the
manufacturer's recommendations.
Moving equipment or parts and energized or pressurized systems can be dangerous. Examples include
shafts, couplings, gears, belts, conveyors, mixers, rotors, and compressing devices.

Entrapment hazards
Entrapment hazards in confined spaces include inwardly
converging walls or floors that slope downward and taper
to a smaller cross-section (such as air plenums).
Engulfment
Engulfment refers to the surrounding or burial of the
worker in a liquid or loose, finely divided solid material, such as sand or grain. Such materials
can suffocate a worker. Examples include:
• Accidental dumping of a product on a worker.
• A worker walking on unstable material such as settled grain. Such materials could conceal
a void underneath that gives way under the weight of the worker, resulting in
engulfment.
General/Physical
Some physical hazards cannot be eliminated because of the nature of the confined space or the
work to be performed. These hazards include such items as scaffolding, surface residues, and
structural hazards. The use of scaffolding in confined spaces has contributed to many accidents
caused by workers or materials falling, improper use of guard rails, and lack of maintenance to
insure worker safety. The choice of material used for scaffolding depends upon the type of
work to be performed, the calculated weight to be supported, the surface on which the
scaffolding is placed, and the substance previously stored in the confined space.
Surface residues in confined spaces can increase the already hazardous conditions of electrical
shock, reaction of incompatible materials, liberation of toxic substances, and bodily injury due
to slips and falls. Without protective clothing, additional hazards to health may arise due to
surface residues.
Structural hazards within a confined space such as baffles in horizontal tanks, trays in vertical
towers, bends in tunnels, overhead structural members, or scaffolding installed for
maintenance constitute physical hazards, which are exacerbated by the physical surroundings.
In dealing with structural hazards, workers must review and enforce safety precautions to
assure safety.

Rescue procedures may require withdrawal of an injured or unconscious person. Careful
planning must be given to the relationship between the internal structure, the exit opening,
and the worker. If the worker is above the opening, the system must include a rescue
arrangement operated from outside the confined space, if possible, by which the employee can
be lowered and removed without injury.

Module 5 Quiz
submitted.
1. Fall hazards are a leading cause of confined space fatalities.
a. True
b. False
2. What should be done if activation of electrical or mechanical equipment could cause injury
while working in a confined space?
a. stay clear of the equipment
b. isolate each piece of equipment
c. post warning signs
d. do not permit entry
3. To prevent slips and trips in a confined space, all of the following should occur, EXCEPT?
a. maintain good housekeeping
b. visually inspect the space
c. ensure adequate illumination
d. clean up spills after work is finished
4. Heat stress may lead to which of the following?
a. heat exhaustion
b. heat cramps
c. heat stroke
d. any of the above

5. ____________ in confined spaces can increase the already hazardous conditions of
electrical shock.
a. Roots invading the space
b. Surface residues
c. Residual static currents
d. Too many entrants

Module 6: Controlling Confined Space Hazards
Introduction
Once hazards are identified, it is critical to institute appropriate control measures to eliminate
or, if not possible, reduce and control confined space hazards. Remember, acceptable entry
conditions must be attained before entry and those safe conditions must be maintained
throughout the duration of an entry. This module explains some of the procedures and
precautions that should be in place to safeguard entrants while they are working in the
confined space.
Confined space engineering controls
Engineering controls are those controls which eliminate or reduce the hazard through implementation
of sound engineering practices.
Ventilation is one of the most common engineering
controls used in confined spaces. When ventilation is
used to remove atmospheric contaminants from the
confined space, the space should be ventilated until the
atmosphere is within the acceptable ranges. Ventilation
should be maintained during the occupancy if there is a
potential for the atmospheric conditions to move out of
the acceptable range.
When ventilation is not possible or feasible, alternate
protective measures or methods to remove air contaminants and protect occupants should be
determined by the qualified person prior to authorizing entry. Conditions regarding continuous
forced air ventilation should be used as follows:
• Employees should not enter the space until the forced air ventilation has eliminated any
hazardous atmosphere,
• Forced air ventilation should be so directed as to ventilate the immediate areas where an
employee is or will be present within the space,
• Continuous ventilation is maintained until all employees have left the space, and
• Air supply for forced air ventilation should be from a clean source.

Confined space administrative controls
Administrative controls are those controls
which eliminate or reduce the hazard through
changes in the work practice (e.g., rotating
workers, reducing the amount of worker
exposure, housekeeping). Confined spaces
should be cleaned/decontaminated of
hazardous materials to the extent feasible
before entry. Cleaning/decontamination
should be the preferred method of reducing exposure to hazardous materials. Where this is not
practicable, PPE should be worn by the entry personnel to provide appropriate protection
against the hazards which may be present.
Personal protective equipment (PPE)
If the hazard cannot be eliminated or reduced to a safe level through engineering and/or work
practice controls, PPE should be used. A qualified person should determine PPE needed by all
personnel entering the confined space, including rescue teams. PPE which meet the
specifications of applicable standards should be selected in accordance with the requirements
of the job to be performed.
Primary control for toxic atmospheres
One primary control measure effective in preventing toxic hazardous atmospheres from
developing in the first place is the use of less toxic products that vaporize less readily. Keep less
of the product at the site and keep containers closed inside the confined space at all times.
Ventilating confined spaces
Once it has been determined that the confined space contains a harmful atmosphere, the next
step is to clear it. Ventilation blows out oxygen-deficient or contaminated atmospheres and
replaces harmful vapors with clean, fresh air. Make sure to ventilate the space thoroughly so
that there are no contaminated pockets left, and then test the atmosphere again.
Ventilation helps to:
• Provide adequate oxygen to the air in the space.
• Control atmospheric contaminants.

• Prevent fire and explosion hazards.
• Control heat and humidity.
Welding, cutting, burning, and continuous brazing generate
hazardous fumes and dusts that can be more effectively removed
by local exhaust ventilation systems at or near the point of
generation.
Considerations to ensure proper ventilation
Initially determine:
• Number and size of openings.
• Volume and configuration of the space to be entered.
• Capacity and positioning of the ventilation equipment
to be used.
• Existing and potential atmospheric hazards.
After beginning ventilation:
• Routinely test the confined space until levels stabilize at acceptable entry conditions.
Once entry and work start:
• Continue ventilation and frequent atmospheric testing for the entire duration of entry.
• Consider atmospheric hazards created by work in the
space.
Respiratory protection
Respiratory protection is needed whenever:
• An emergency exists and entry cannot be delayed. Assume
that an IDLH atmosphere exists.
• There is an inert atmosphere or testing shows that an IDLH
exists and additional ventilation cannot reduce
concentrations to safe levels.
• Current testing indicates atmosphere to be safe, but
unsafe conditions could reasonably be expected to

develop at any time.
Confined Space Inspections
Inspecting your confined space entry program, procedures, and practices is an important part
of the safety management system evaluation. Use a checklist like this to help identify strengths
and weaknesses in the program.
1. _____ Are confined spaces thoroughly emptied of any corrosive or hazardous
substances, such as acids or caustics, before entry?
2. _____ Are all lines to a confined space, containing inert, toxic, flammable, or corrosive
materials valved off and blanked or disconnected and separated before entry?
3. _____ Are all impellers, agitators, or other moving parts and equipment inside confined
spaces locked-out if they present a hazard?
4. _____ Is either natural or mechanical ventilation provided prior to confined space
entry?
5. _____ Are appropriate atmospheric tests performed to check for oxygen deficiency,
toxic substances and explosive concentrations in the confined space before entry?
6. _____ Is adequate illumination provided for the work to be performed in the confined
space?
7. _____ Is the atmosphere inside the confined space frequently tested or continuously
monitored during conduct of work?
8. _____ Is there an assigned safety standby employee outside of the confined space when
required, whose sole responsibility is to watch the work in progress, sound an alarm if
necessary, and render assistance?
9. _____ Is the standby employee appropriately trained and equipped to handle an
emergency?
10. _____ Is the standby employee or other employees prohibited from entering the
confined space without lifelines and respiratory equipment if there is any question as to
the cause of an emergency?
11. _____ Is approved respiratory equipment required if the atmosphere inside the
confined space cannot be made acceptable?
12. _____ Is all portable electrical equipment used inside confined spaces either grounded
and insulated, or equipped with ground fault protection?
13. _____ Before gas welding or burning is started in a confined space, are hoses checked
for leaks?
14. _____ Are compressed gas bottles forbidden inside of the confined space?

15. _____ Is the confined area tested for a flammable/explosive atmosphere prior to using
electrical equipment/lights within the confined space?
16. _____ If the confined space may contain a potentially flammable/explosive atmosphere,
are only intrinsically safe equipment and lights used within the confined space?
17. _____ If employees will be using oxygen-consuming equipment-such as salamanders,
torches, and furnaces, in a confined space, is sufficient air provided to assure
combustion without reducing the oxygen concentration of the atmosphere below 19.5
percent by volume?
18. _____ Whenever combustion-type equipment is used in a confined space, are provisions
made to ensure the exhaust gases are vented outside of the enclosure?
19. _____ Is each confined space checked for decaying vegetation or animal matter which
may produce methane?
20. _____ Is the confined space checked for possible industrial waste which could contain
toxic properties?
21. _____ If the confined space is below the ground and near areas where motor vehicles
will be operating, is it possible for vehicle exhaust or carbon monoxide to enter the
space?

Module 6 Quiz
submitted.
1. Which of the following control strategies serve to eliminate or reduce the hazard through
implementation of sound engineering practices?
a. education controls
b. engineering controls
c. administrative controls
d. work practice controls
2. What is one of the most common engineering controls used in confined spaces?
a. lockout/tagout
b. ventilation
c. post warning signs
d. use of personal protective equipment
3. Which of the following eliminate or reduce the hazard through changes in the work
practice?
b. engineering controls
c. manufacturing controls
d. administrative controls
4. Which control strategy must be used if the hazard cannot be eliminated or reduced to a
safe level through engineering and/or work practice controls?
b. administrative
c. ergonomics controls
d. personal protective equipment

5. Welding, cutting, burning, and continuous brazing generate hazardous fumes and dusts
that can be more effectively removed by ______________ systems at or near the point of
generation.
a. multiple point ventilation
b. remote exhaust ventilation
c. local exhaust ventilation
d. single point ventilation

Module 7: The Confined Space Entry Team
Management responsibilities
Your safety department will probably be responsible for developing the confined space
program. Your line managers should always be responsible for deploying or implementing the
program. Remember, safety is a line responsibility, not a staff support responsibility. Line and
staff managers should:
• Ensure that a list of confined spaces is maintained,
• Ensure that canceled permits are reviewed for lessons learned,
• Ensure training of entry team members (authorized entrants, attendants, and entry
supervisors) and other affected persons are conducted,
• Ensure coordination with outside emergency responders,
• Ensure personal protective equipment is in compliance with standards, and
• Maintain a master inventory of identified confined spaces.
Confined Space Entry Supervisor responsibilities
The Confined Space Entry Supervisor holds a key position with important responsibilities. This
position is in charge of confined space work and should:
• Ensure requirements for entry have been completed before entry is authorized
• Authorizing entry and overseeing entry operations
• Ensure confined space monitoring is performed by personnel qualified and trained in
confined space entry procedures
• Ensure a list of monitoring equipment and personnel qualified to operate the equipment
is maintained by the employer
• Ensure that the rescue team has simulated a rescue in a confined space within the past
twelve months
• Know the hazards that may be faced during entry, including the mode, signs or
symptoms, and consequences of exposure
• Fill out a permit when it is required
• Determine the entry requirements and that conditions are acceptable for entry
• Notify all involved employees of the permit requirements

• Post the permit in a conspicuous location near the job
• Renew the permit or have it reissued as needed (a new permit is required every shift)
• Determine the number of attendants required to perform the work
• Perform duties as the confined space attendant if required
• Ensure the attendant knows how to communicate with the entrants and how to obtain
assistance
• Ensuring measures are in place to keep unauthorized personnel clear of the area
• Post any required barriers and signs
• Remain alert to changing conditions that might affect the conditions of the permits, (i.e.,
require additional atmospheric monitoring or changes in personal protective equipment)
• Serving as an attendant, as long as the person is trained and equipped appropriately for
that role
• Change and reissue the permit, or issue a new permit as necessary
• Ensure periodic atmospheric monitoring is done according to permit requirements
• Ensure that personnel doing the work and all support personnel adhere to permit
requirements
• Ensure the permit is canceled when the work is done
• Ensure the confined space is safely closed and all workers are cleared from the area
• Checking the work at least twice a shift to verify and document permit requirements are
being observed (more frequent checks should be made if operations or conditions are
anticipated that could affect permit requirements)
• Ensuring that necessary information on chemical hazards is kept at the work site for the
employees or rescue team
• Ensuring a rescue team is available and instructed in their rescue duties (e.g., an on-site
team or a prearranged outside rescue service)
• Ensuring at least one member of the rescue team has current certification in first aid and
CPR
• Terminating entry procedures as required
Confined Space Entrant responsibilities
Employees who are granted permission to enter a confined space should:
• Read and observe the entry permit requirements
• Stay alert to the hazards that could be encountered in a confined space
• Use the protective equipment required by the permit

Confined space entrants must immediately exit the confined space when:
• Ordered to do so by the attendant
• Automatic alarms sound
• They perceive they are in danger
• They notice physiological stresses or changes in themselves or co-workers (e.g., dizziness,
blurred vision, shortness of breath).
Confined Space Attendant responsibilities
The Attendant should be stationed outside the work space and should:
• Be knowledgeable of, and be able to recognize potential confined space hazards;
• Maintain a sign-in/sign-out log with a count of all persons in the confined space and
ensure all entrants sign in/sign-out;
• Monitor surrounding activities to ensure the safety of personnel;
• Maintain effective and continuous communication with personnel during confined
space entry, work and exit;
• Order personnel to evacuate the confined space if he/she:
o Observes a condition which is not allowed on the entry permit;
o Notices the entrants acting strangely, possibly as a result of exposure to hazardous
substances;
o Notices a situation outside the confined space which could endanger personnel;
o Notices within the confined space a hazard which has not been previously
recognized or taken into consideration;
o Must leave his/her work station; or
o Must focus attention on the rescue of personnel in some other confined space that
he/she is monitoring;
• Immediately summon the Rescue Team if crew rescue becomes necessary; and
• Keep unauthorized persons out of the confined space, order them out, or notify
authorized personnel of the unauthorized entry.
Confined Space Rescue Team responsibilities?
The Rescue Team members should:

• Complete a training drill using mannequins or personnel in a simulation of the confined
space prior to the issuance of an entry permit for any confined space and at least
annually thereafter;
• Respond immediately to rescue calls from the Attendant or any other person
recognizing a need for rescue from the confined space;
• In addition to emergency response training, receive the same training as that required
of the authorized entrants; and
• Have current certification in first-aid and CPR.

Module 7 Quiz
submitted.
1. _____________ are usually responsible for developing the confined space program and
___________ are responsible to deploy or implement the confined space program.
a. Employees, safety managers
b. Safety staff personnel, line managers
c. Outside experts, safety supervisors
d. OSHA consultants, employees
2. Which of the following situations would require an immediate exit from the confined
space?
a. automatic alarm sounds
b. ordered to exit the space by the attendant or supervisor
c. dizziness, blurred vision
d. all of the above
3. Who is responsible to maintain the confined space sign-in/sign-out log?
a. entry supervisor
b. recorder
c. authorized entrant
d. attendant
4. The confined space entry supervisor may also perform duties as the attendant during
confined space operations.
a. True
b. False

5. The confined space rescue team must respond __________ to rescue calls from the
Attendant.
a. when available
b. as soon as possible
c. immediately
d. within 4 minutes

Module 8: Confined Space Rescue
Introduction
Two-thirds of all confined space fatalities occur among would-be rescuers. To prevent deaths, it
is critical to use good confined space entry practices so that there is no need for rescue
operations. Remember, even a well-planned rescue can end up as a body retrieval. Rescues can
be performed by any employee or a professional rescuer so long as he or she has been fully
trained and qualified to act as a rescuer. Qualifications include knowledge of and experience
working with all hazards associated with rescue and confined space entry operations.
Why confined spaces kill so many people
Confined spaces are deceiving. A confined space often appears to be harmless; no danger signs
are apparent and the space may have been entered on prior occasions without incident.
However, a worker cannot assume that conditions have not changed and that the space is safe
for entry each time.
Confined space emergencies
A confined space emergency is any occurrence inside or outside the space, including failure of
hazard control or monitoring equipment that may endanger authorized confined space
entrants. Believe it or not, during emergencies, rescuers end up as confined space fatalities
more often than those being rescued. So, why is that? Fatalities can occur when the rescuers:
• Are overcome by their emotions
• Take unnecessary chances
• Do not know the hazards involved
• Do not have a plan of action
• Lack confined space rescue training
It is important to know that the period of time for successful rescue is very limited. Otherwise, a
rescue attempt will become body retrieval. After only four minutes without oxygen, it is very
likely that a worker will experience asphyxiation, which may result in brain damage or death.

Preventing confined space rescuer fatalities
Planning the rescue is paramount. Make sure rescue team members understand their duties,
and practice, practice, practice!
Ensure that the rescuer does not travel a greater distance than allowed by the air supply, self-
contained breathing apparatus (SCBA), and escape cylinders. Analyze distance, space
configurations, physical obstacles, and total time needed to enter the space, perform rescue
operations, and leave the space. Leave the space immediately whenever a problem arises with
respiratory protection equipment or whenever the attendant orders evacuation. Everyone
involved in a rescue should assume that the space is deadly and that entry rescue may be
required in the worst case!
Confined space rescue training topics
At a minimum, training must include:
• Recognition of permit space hazards.
• Control of permit space hazards.
• Use of atmospheric monitoring equipment.
• Use and maintenance of personal protective equipment (PPE).
• Use and maintenance of rescue equipment.
• Annual practice of permit space rescues.
• Proficiency in first aid and cardiopulmonary resuscitation (CPR).
• Documentation of training.
Three rescue strategies
Depending on the severity of the emergency, different rescue strategies or methods can be
used. When the emergency is minor, self-rescue is often the best approach; however, if the
worker is disabled, it is likely that non-entry or entry rescue may need to be used. Entry rescue
involves putting others at risk, and should be used only if absolutely necessary.
1. Because of the speed at which confined space hazards can incapacitate and kill, self-
rescue is the preferred plan. The self-rescue plan provides entrants with the best chance
of escaping a permit space when hazards are present. Whenever authorized entrants
recognize their own symptoms of exposure to a dangerous atmosphere, or when a

prohibited condition is detected, entrants are still able to escape from the space
unaided and as quickly as possible.
Self-rescue is vitally important because the entrant is:
• Conscious and alert.
• Able to recognize his or her own signs and symptoms.
• Still physically able to evacuate space more rapidly than waiting for someone else to
rescue him or her.
• Able to alert fellow workers of impending dangers.
• Not endangering anyone else.
2. Non-entry rescue is the next-best approach when self-rescue is not possible because
non-entry rescue can be started right away and prevents additional personnel from
being exposed to unidentified and/or uncontrolled confined space hazards. Usually,
equipment and other rescue aids are employed to assist in removing endangered
entrants. In situations where configuration of the space or other elements prevent the
removal of the worker, entry rescue may be the only solution.
3. Entry rescue involves rescuers entering the space to retrieve the entrant and/or provide
the victim with emergency assistance such as CPR, first aid, and air via SCBA or a
supplied air respirator (SAR), if needed. An entry rescue plan needs to be developed
ahead of time in the event of an emergency for which the non-entry rescue plan is not
appropriate.
Informing rescuers
It's important that rescuers are provided with vital information so that they can most effectively
perform rescue operations. Rescuers will need to know:
• Number of victims and location of emergency.
• Length of time victims have been exposed to hazard.
• Suspected cause of accident.
• All information on entry permit, including:
o Atmospheric testing results.
o Isolation procedures.
o Material Safety Data Sheet (MSDS) information.

The rescue plan
It's important to think through the rescue process proactively to make sure it is successful.
Rescue plans may involve on-site rescue teams or they may rely on off-site rescue service
providers. A thorough rescue plan includes:
• A barricade area for crowd control.
• Additional ventilation options.
• Control of other hazards (cave-ins, traffic, etc.).
• Protective clothing and equipment.
• Appropriate lighting equipment (explosion-proof).
• Methods of communication.
• A standby rescue team.
• Victim removal procedures and devices.
• Available emergency vehicles.
• Medically trained personnel.
Rescue Simulations
It's crucial that members of a rescue team practice simulated confined space rescues for each
unique confined space at a facility. Rescue practices in simulated or actual spaces should be
performed at least once every 12 months or more frequently if deemed necessary.
Re-evaluating rescue plans
Re-evaluate the plan whenever:
• Conditions change within the space.
• Workers discover any new hazards.
• There are changes in the rescue personnel and/or personnel availability.
• New equipment is purchased.
• Routine proficiency training results are unsatisfactory.
• A rescue plan is found to be deficient (e.g., a failed simulated rescue).
On-Site Rescue

Because most rescue service providers are unable to rescue within the four-minute time limit,
most employers develop their own rescue teams. At least one on-site rescue team member
should be trained in first aid and CPR.
Each member of the rescue team should be trained to:
• Properly use and maintain PPE and rescue equipment
• Act as a rescuer in annual simulated emergencies
• Assume individual roles and take on any emergency
Off-Site Rescue
Remember that while the window of opportunity for a rescue is very brief—only four
minutes—the response time for an off-site rescue team may be considerably longer. After four
minutes have lapsed, the victim could suffer brain damage or die. In some emergencies,
rescuers may have even less than four minutes to act. Other situations may allow more time. To
make sure your confined rescue plan is effective, make sure you:
• Arrange for local rescue/fire departments to provide rescue services.
• Supply the number and description of each permit required confined space in the facility
ahead of time.
• Disclose all known hazards associated with the space(s) so that appropriate rescue plans
can be developed.
• Provide access to the space so that off-site rescue personnel can familiarize themselves
with the site, develop a rescue plan in advance, and practice rescue operations.
Verifying the availability of the off-site rescue service
If the employer relies on an off-site rescue service, the employer must contact the provider to
verify they are available to conduct rescue operations if requested. The verification task is
usually assigned to the entry supervisor. If the off-site rescue service indicates for any reason
that it would be unable to respond to a rescue summons, entry must not be authorized unless
and until an adequate back-up rescue service is arranged and confirmed.

Entry vs. Non-Entry
If the worker is physically able to use rescue equipment (safety retrieval line, rope, wristlets,
etc.), rescuers may choose not to enter the space. Instead, they can provide appropriate
equipment and assistance necessary to bring the worker out of the space (a non-entry rescue).
In situations in which the worker is unresponsive, atmospheric hazards are extremely high, or
significant time has elapsed before rescuers arrive at the site, emergency rescue personnel may
decide that the risks associated with entering outweigh the potential for a successful rescue. If
this is the case, rescuers may elect not to go into the confined space until conditions warrant a
safe entry.
Non-entry rescue is the preferred method for confined space emergencies. It's important to
remember that the confined space Attendant should not perform entry rescue. Rescue
requiring entry should be performed by a trained rescue team or emergency service providers.
Rescue equipment
The importance of having the right rescue equipment on hand can't be stressed enough. Rescue
equipment may include:
• Full body harness with retrieval line attached.
• Wristlets (may be used in rescue when it can be shown that they are the safest and
most effective means of rescue).
• Hand-cranked mechanical winch and tripod (required when entrant is five feet or more
below the entrance).
• Ladder.
• Explosion-proof lighting.
• SCBA/SAR.
• Stretcher.
• Approved head protection.
Using the full body harness and retrieval lines
All authorized entrants and rescuers entering permit spaces are required to use full body
harnesses and retrieval lines, unless it is determined that the retrieval equipment would
increase the overall risk of entry or would not contribute to the rescue operation.

What kind of equipment should be used for lowering or lifting entrants?
Only devices designed by the manufacturer and approved for moving humans should be used.
The equipment must enable a rescuer to remove the injured employee from the space quickly
without injuring the rescuer or further harming the victim.
If there is even a remote possibility of other atmospheric contaminants, even though
monitoring equipment readings appear to be within the normal ranges, rescuers should still use
appropriate respiratory protection. Play it safe:
• Wear SCBA or SAR.
• Do not use air purifying respirators for confined space rescue.

Module 8 Quiz
submitted.
1. Rescues must be performed only by a professional rescuer who has been fully trained and
qualified to act as a rescuer.
a. True
b. False
2. Which of the following is not a common reason rescuers end up as confined space fatalities
more often than entrants?
a. they take unnecessary risks
b. they lack proper training
c. they do not know the hazards involved
d. they work too slowly
3. When self-rescue is not possible, which confined space rescue strategy is the next best for
most emergencies?
a. entry rescue
b. partial entry rescue
c. non-entry rescue
d. none of the above
4. A rescue attempt will likely become body retrieval after __________ without oxygen.
a. 4 minutes
b. 8 minutes
c. 10 minutes
d. 20 minutes

5. What should the employer do if a rescue service provider is unable to rescue within the
four-minute time limit?
a. rely on self-rescue
b. use a 911 service
c. develop a rescue team
d. hope the need does not arise

Module 9: Confined Space Training Requirements
Introduction
It's important that the employer provides training so that all
employees who are required to perform confined space entry
operations acquire the understanding, knowledge, and skills
necessary for the safe performance of their duties in confined spaces.
Confined space training triggers
Training should be provided to each affected employee:
• before the employee is first assigned duties under this section
• whenever the employee demonstrates inadequate knowledge
• before there is a change in assigned duties
• whenever there is a change in permit space operations that presents a hazard for which
an employee has not been trained
• whenever there are deviations from the permit space entry procedures
The training should establish employee proficiency in his or her confined space entry
procedures and which task is being performed within the confined space.
General Training Topics
All employees who will enter confined spaces must be
trained in entry procedures. Personnel responsible for
supervising, planning, entering or participating in confined
space entry and rescue must be trained in their duties prior
to any confined space entry.
Training should include:
• Explanation of the general hazards associated with
confined spaces;
• Discussion of specific confined space hazards
associated with the facility, location or operation;

• Reason for, proper use, and limitations of PPE and other safety equipment required for
entry into confined spaces;
• Explanation of permits and other procedural requirements for conducting a confined
space entry;
• A clear understanding of what conditions would prohibit entry;
• How to respond to emergencies;
• Duties and responsibilities as a member of the confined space entry team; and
• Description of how to recognize (1) symptoms of overexposure to probable air
contaminants in themselves and co-workers, and (2) methods for alerting attendants.
Refresher training should be conducted to maintain employee competence in entry procedures
and precautions. If employees do not enter a confined space to perform work for an extended
period of time (at least annually), they should be provided an opportunity to practice entry
procedures.
Specific Training
Those entry team members who are responsible for monitoring confined space atmospheres
should receive training on the proper use of monitoring and testing instruments. Training
should include proper use of monitoring instruments such as:
• Proper use of the equipment;
• Knowledge of calibration;
• Knowledge of sampling strategies and techniques; and
• Knowledge of PELs, TLVs, LELs, UELs, etc.
Training for Attendants
Training should include the following:
• Procedures for summoning rescue or other
emergency services, and
• Proper utilization of equipment used for
communicating with entry and emergency/rescue
personnel.
Training for Emergency Response Personnel
Training should include:

• Rescue plan and procedures developed for each type of confined space that are
anticipated to be encountered
• Use of emergency rescue equipment
• First aid and CPR techniques
• Work location and confined space configuration to minimize response time
Verification of Training
Periodic assessment of the effectiveness of employee training should be conducted by a
qualified person. Training sessions should be repeated as often as necessary to maintain an
acceptable level of personnel competence.
• If confined space entry team members routinely work in confined spaces, refresher
training may be brief.
• If confined space entry is rarely accomplished, team members should complete more
comprehensive refresher training at least annually.
Make sure documentation of training verifies knowledge and skills. The training should include
a written test and a practical demonstration requirement. The confined space entry team
members should be able to "prove" they know what to do and how to do it. A competent
person should certify the employees have demonstrated adequate knowledge and skills.

Module 9 Quiz
submitted.
1. Which of the situations below would "trigger" the need for confined space training?
a. upon initial assignment
b. a change in assigned duties
c. a demonstrated lack of knowledge
d. any of the above
2. Confined space training should establish employee proficiency in his or her ____________
procedures and the __________ within the confined space.
a. confined space designations, hazard to avoid
b. understanding of, dangers present
c. reporting, conditions that might develop
d. confined space entry, task being performed
3. Confined space entrants must know how to treat overexposure to air contaminants and
methods for alerting Attendants.
a. True
b. False
4. If confined space entry is rarely accomplished, team members should complete more
comprehensive refresher training at least ___________.
a. once a year
b. once every six months
c. quarterly
d. every month

5. Confined space training should include which of the following?
a. written test
b. demonstration
c. written test and demonstration
d. written test or demonstration

713studyguide

More Related Content

What's hot (17)

Viewers also liked (8)

Similar to 713studyguide (20)

More from YAWAR HASSAN KHAN (20)

713studyguide