A comprehensive review on D-FACTS devices

@ IJTSRD | Available Online @ www.ijtsrd.com
ISSN No: 2456
International
Research
A comprehensive review on D
M.Tech Scholar, Electrical Engineering Department
YIET, Gadhauli
ABSTRACT
Flexible ac transmission systems (FACTSs) and
voltage-source converters, with smart dynamic
controllers, are emerging as a stabilization and power
filtering equipment to improve the power quality.
Also, distributed FACTSs play an important role in
improving the power factor, energy utilization,
enhancing the power quality, and ensuring efficient
energy utilization and energy management in grids.
This paper presents a literature survey of FACTS
technology tools and applications for power quality
and efficient utilization of electric system. There are
some drawbacks of FACTS devices. These drawbacks
can be fulfilled by using new compound, scalable,
light weighted and cost effective devices that are
distributed-FACTS (D-FACTS). D
controllers are distributed version of conventional
lumped FACTS controllers and their cost is low due
to lower ratings of component and reliability also
increases due to redundancy of devices. The
Enhanced Power Flow Controller (EPFC) is a D
FACTS controller which is distributed version of
thyristor controlled series controller. DPFC
controllers are used in series at small distance gap at
every 5-10 km distance with transmission line to
control the power flow. This paper discusses
extensive review of the DPFC controller and its
application in modern power system era.
Keywords: D-FACTS, TCSC, EPFC, FACTS
Controller, Power flow control
I. INTRODUCTION
Electrical practices for the entire power system
industry are tremendously changing and these
progressions will mark an evolution of new concepts
and strategies in the future, particularly concerning
@ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 3 | Mar-Apr 2018
ISSN No: 2456 - 6470 | www.ijtsrd.com | Volume
International Journal of Trend in Scientific
Research and Development (IJTSRD)
International Open Access Journal
A comprehensive review on D-FACTS devices
Zeba Akram
M.Tech Scholar, Electrical Engineering Department
YIET, Gadhauli, Yamunanagar, Haryana, India
transmission systems (FACTSs) and
source converters, with smart dynamic
controllers, are emerging as a stabilization and power
filtering equipment to improve the power quality.
Also, distributed FACTSs play an important role in
factor, energy utilization,
enhancing the power quality, and ensuring efficient
energy utilization and energy management in grids.
This paper presents a literature survey of FACTS
technology tools and applications for power quality
n of electric system. There are
some drawbacks of FACTS devices. These drawbacks
can be fulfilled by using new compound, scalable,
light weighted and cost effective devices that are
FACTS). D-FACTS
f conventional
lumped FACTS controllers and their cost is low due
to lower ratings of component and reliability also
increases due to redundancy of devices. The
Enhanced Power Flow Controller (EPFC) is a D-
FACTS controller which is distributed version of
hyristor controlled series controller. DPFC
controllers are used in series at small distance gap at
10 km distance with transmission line to
control the power flow. This paper discusses
extensive review of the DPFC controller and its
modern power system era.
FACTS, TCSC, EPFC, FACTS
Electrical practices for the entire power system
industry are tremendously changing and these
progressions will mark an evolution of new concepts
and strategies in the future, particularly concerning
the planning and operation of the power systems. The
detrimental effects such as aging, hazardous
atmospheric changes associated with conventional
energy sources make renewable energy based
distributed generation to take a lead in future power
generation. Distributed generators like solar, the wind,
biomass, fuel cells and microturbines will give
significant momentum for power generation in the
coming future. A microgrid (MG) is a small scale
power network designed for a low voltage distribution
system to provide a power supply for a small
community/island [1,2]. The microgrid operates in
two operating modes; grid connected (connected to
the conventional grid to allow power exchange) and
individual/islanded mode (independent of the
conventional grid). The major elements of MG have
DG units like PV and wind gene
devices, different loads, and power controllers. The
interconnection of these DGs to the conventional grid
is normally achieved by employing power converters.
The use of power converters offers vast benefits like
optimal operation and flexible control [3]. However,
this power electronic interfacing creates a plethora of
power quality problems [4
problems in a microgrid are of a large variety such as
voltage harmonics, voltage sags, voltage swells,
voltage unbalance, current harmonics, reactive power
compensation (RPC), current unbalance and
circulation of neutral currents, impulse transients, and
interruptions [8]. Among these, reactive power
compensation is considered as a major concern in this
paper.
The power system operates on AC system and most of
the loads used in our daily life demand reactive
power. Thus reactive power or VAR compensation is
characterized as the administration of reactive energy
Apr 2018 Page: 1811
6470 | www.ijtsrd.com | Volume - 2 | Issue – 3
Scientific
(IJTSRD)
International Open Access Journal
FACTS devices
the planning and operation of the power systems. The
etrimental effects such as aging, hazardous
atmospheric changes associated with conventional
energy sources make renewable energy based
distributed generation to take a lead in future power
generation. Distributed generators like solar, the wind,
fuel cells and microturbines will give
significant momentum for power generation in the
coming future. A microgrid (MG) is a small scale
power network designed for a low voltage distribution
system to provide a power supply for a small
2]. The microgrid operates in
two operating modes; grid connected (connected to
the conventional grid to allow power exchange) and
individual/islanded mode (independent of the
conventional grid). The major elements of MG have
DG units like PV and wind generators, storage
devices, different loads, and power controllers. The
interconnection of these DGs to the conventional grid
is normally achieved by employing power converters.
The use of power converters offers vast benefits like
ble control [3]. However,
this power electronic interfacing creates a plethora of
power quality problems [4–7]. Power quality
problems in a microgrid are of a large variety such as
voltage harmonics, voltage sags, voltage swells,
harmonics, reactive power
compensation (RPC), current unbalance and
circulation of neutral currents, impulse transients, and
interruptions [8]. Among these, reactive power
compensation is considered as a major concern in this
The power system operates on AC system and most of
the loads used in our daily life demand reactive
power. Thus reactive power or VAR compensation is
characterized as the administration of reactive energy

International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470
@ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 3 | Mar-Apr 2018 Page: 1812
to enhance the performance of the AC system. The
issue of reactive power compensation is seen from
two ways: load and voltage support. The aim is to
achieve an improved power factor and real power
balance from the load point of view, while the voltage
support is primarily necessary to reduce voltage
fluctuations at a given terminal of a transmission or
distribution line. In both the cases, the reactive power
that flows through the microgrid has to be effectively
controlled and compensated.
In islanded operating condition, the microgrid has to
maintain the reactive power balance independently
due to the absence of an infinite bus. The firmly
coupled generation and utilization along with the
presence of non-dispatchable intermittent renewable
power sources require reactive power support.
Similarly, in a grid interconnected mode, the reactive
power compensation is also found to be challenging
due to linear and non-linear loads. This paper
envisages reactive power issues of a microgrid in
different conditions. In this regard, a microgrid is
modeled and developed consisting of renewable
energy sources such as PV and wind energy
conversion system (WECS), and connected to a load.
Maximum power point tracking (MPPT) controllers
are employed for both PV and WECS. The power
quality problems of the microgrid, when subjected to
supply and load variations, is observed and presented
in the next section.
II. FACTS DEVICES
FACTS devices and integrated power electronic
converters with flexible fast acting control strategies
are used in emerging smart grids and integrated ac-dc
renewable energy systems. They are based on the
concepts of:
i. Modulating apparent admittance (Y) and
impedance at the point of common coupling and
key common ac bus.
ii. Injecting ac components in series or parallel with
the electric network nodes to create current flows
or superimposed voltages.
iii. Supplying localized reactive or capacitive current
at the bus for reactive power flow control.
iv. Modulating or switching the equivalent-driving
point impedance (Z) at the interface bus by
controlled switching.
The control strategies are based on voltage, power,
angle or reactive power flow control using classical
proportional-integral-derivative (PID) controllers,
optimal control, heuristic soft computing control
strategies and/or a multi-objective control
performance index (J). The converter topologies can
be classified into:
a) Voltage source-converter fed
b) Dc-current source injection interface
c) Switched/modulated inductors or capacitors
d) Active power filter topologies
The resulting voltage and current waveforms are
usually distorted and contain harmonics due to
switching nature of power electronics converters, and
additional interface filters are usually required. In
recent decades, due to the increasing demand of
electricity in different countries, the need to build new
transmission lines, electricity posts and increase the
capacity of transmission lines has greatly increased.
But the construction of new electricity transmission
lines requires a huge capital investment. As a result,
finding effective solutions to reduce the costs for
electric companies has been a great challenge. The
main objectives of FACTS devices are to increase the
useable transmission capacity of lines and to control
the power flow over designated transmission routes.
FACTS devices are also used to improve the power
quality. There are different types of FACTS devices
such as static VAR compensator (SVC); dynamic
flow controller (DFC); thyristor controlled series
compensator (TCSC); HVDC back to back (HVDC
B2B); unified power flow controller (UPFC); static
synchronous series compensator (SSSC); static
synchronous compensator (STATCOM); and dynamic
power flow controller (DPFC). According to their
connection, they are classified as shunt-connected
controllers, series-connected and combined series-
and shunt-connected controllers.
2.1. Static VAR compensator (SVC)
In the 1970s, the first generation of FACTS devices,
known as Static VAR Compensator (SVC), was
introduced. A SVC is a shunt-connected absorber
capable of exchanging capacitive/inductive power to
control specific parameters of the electrical power
system. In 1974, the first SVC was installed in
Nebraska by General Electric. More than 800 SVCs
with power ratings ranging from 60 to 600 MVAR
have been installed by electrical utilities until now.
ABB has provided about 55% of the SVC market,

with 3% in Asian countries. SVC may improve
transient stability by dynamically supporting the
voltage at key points and steady state stability by
helping to increasewing oscillation damping. The
accuracy, availability and fast response of SVCs
enable these devices to provide high performance
regarding steady state and transient voltage control.
Furthermore, SVCs are used to improve the transient
stability, damp power swings and reduce system
losses by using reactive power control.
2.2. Thyristor controlled series compensator
(TCSC)
A TCSC, which consists of a series capacitor bank
shunted by a thyristor-controlled reactor to provide a
smoothly variable series capacitive reactance. TCSCs
play vital roles in the operation and control of power
systems such as enhancing power flow, limiting fault
current, enhancing transient and dynamic stability. It
includes an inductor in parallel with a series capacitor
enables a continuous and rapid variable series
compensation system. The main advantages of TCSC
devices are increased real power transferred, power
oscillation damping, sub-synchronous resonance
damping and power flow line control. The first TCSC
installed in 1992 operates at 230 kV and is used to
increase power transfer capability of Kayenta,
Arizona Substation. It increased the capacity of the
transmission network by nearly 30%. At the end of
the year 2004, seven TCSCs were installed around the
world such as Stöde/ Sweden, Pinguo substation in
1999, State power south company, Guangzhou/China
in 2002 and Raipur substation/ India in 2004. A TCSC
has three operation modes:
(i) thyristors blocked (no gating and zero thyristor
conduction), where the TCSC net impedance is just
the capacitive reactance,
(ii) thyristors activated (continuous gating and full
thyristor conduction), where most of the line current
flows through the inductive reactance, and
(iii) Vernier operation with phase control of gating
signals. In the last mode, the thyristors are controlled
in such a manner that a certain amount of inductive
current can circulate through the capacitor, thereby
increasing the effective capacitive/inductive reactance
of the module.
2.3. Static synchronous compensator (STATCOM)
A STATCOM is integrated by a SVC usually based
on the gate turnoff (GTO) type thyristors. The
STATCOM is capable of generating or absorbing
reactive power at its output terminals. It can also deal
with real power when it is fed from an energy source
or an energy storage device of appropriate rating. The
first STACTOM was installed in Japan in 1991. It is
rated at ± 80 MVAR and provides voltage
stabilization in Inumaya substation. The largest
STACOMSs with a capacity of + 225 MVAR and ±
100 MVAR were installed in East Claydon 400 kV
substation/UK in 2001 and SDG & E Talega
substation/USA in 2003, respectively. The purposes
of those STATCOMs installations were to provide
dynamic reactive compensation of East Claydon 400
kV substation, and dynamic VAR control during peak
load conditions of SDG &E Talega substation. Also,
in 2013 a STATCOM with capacity of ± 150 MVAR
at 275 kV was installed in Turnkey too.
2.4. Static synchronous series compensator (SSSC)
A SSSC is an FACTS controller based on a series-
connected VSC. It injects a voltage with controllable
magnitude and phase angle at the line frequency and
is found to be very capable of handling power flow
control, besides improving transient stability margin
and transient damping. The main advantage of SSSC
over a TCSC is that it does not remarkably affect the
impedance of the transmission system and hence there
is no danger of having resonance problems.
2.5. Distributed FACTS (D-FACTS)
Due to the increasing use of RESs as DG in the
electrical distribution network, the policy of
investment in the energy area and control of power
system has changed. It is a new concept of D-FACTS
was suggested as an alternative solution to solve the
main problem of the last generation of FACTS
devices, which is the cost effective power flow
control. Currently, D-FACTS are designed to address
power control types of problems. D-FACTS can be
used to dynamically control the effective line
impedance. Also, from a power system perspective,
D-FACTS devices offer many potential benefits since
they are less expensive and smaller than usual FACTS
devices, which may make them better candidates for
wide scale deployment. The most important D-
FACTS that have been used in the smart/ micro grids.
Nowadays, increasing performance and decreasing
price of power electronics and communication
technologies is transforming the entire electrical
industry sectors into modern electrical networks.
Deployment of low power FACTS devices, i.e. D-
FACTS devices, can provide a higher performance
and lower cost method for enhancing smart/micro

grids controllability and reliability, enhancing asset
utilization and end-user power quality, while
environmental impact and minimizing system cost.
FACTS/D-FACTS devices and power quality
Use of RESs in traditional electrical networks has
changed the policy of electrical utilizes regarding
control, reliability, management, power quality and
protection of electrical system. Good power quality is
an important factor for a reliable supply of electricity
to loads in a power system. However, the current
electronic devices and nonlinear loads produce non-
sinusoidal waveforms, which can result in poor power
quality. FACTS and D-FACTS devices play an
important role to enhance power quality in traditional
(without RES) and modern (with RES) electrical
networks. Energy management by fuzzy logic
controllers.
Role of FACTS devices in improving power quality
in future networks
Emerging smart grids with DG, including RESs, and
integration of ac-dc systems require the use of FACTS
devices and stabilization power electronic converters,
together with fast acting control strategies. New
FACTS topologies are emerging to ensure decoupled
ac-dc interface, improved voltage security, reactive
compensation, voltage and power factor
improvement, and loss reduction. They also enhance
the security of micro grids, stand-alone ac-dc DG
schemes using photovoltaic, wind, fuel cell, battery
storage, micro gas turbines (MGT), wave/tidal
generation CNG/diesel GEN-sets as back-up systems.
FACTS technology includes VSCs, STATCOMs,
SSSCs, UPFs, active power filters and Gate-
Controlled Series Capacitor (GCSC). Modern power
systems with new demand smart metering (DSM) and
integrated DG including solar PV and wind farms will
require new modified smart-soft computing, control
strategies and enhanced power electronic converter
topologies to ensure reliability, security, power
quality and efficient utilization without transient over-
voltages and inrush currents. Improved energy
utilization with effective voltage regulation at key
interface bus regulations will restrict sizing/ siting of
distributed renewable/alternate generation. Green and
renewable energy generation are expected to supply
20–25% of the electrical energy by 2050 from sources
that include the wind, solar, geothermal, wave/tidal,
bio/natural gas, fuel cell, hybrid, and waste to energy.
Also, new designs of flexible VSC FACTS schemes
will target distribution/utilization network devices
such as the distributed static series compensators
(DSSCs), distribution STATCOMs (DSTATCOMs)
and switched power filters compensation schemes.
CONCLUSIONS
This paper has presented a comprehensive overview
of use of FACTS/D-FACTS technology and its
application in emerging electric utilities using RESs
with power electronic converters. The existing
FACTS devices are undergoing tremendous changes
in configurations based on soft computing control
strategies using smart grid-based fast control
strategies and the multi-functional use of voltage
control, stabilization, reactive power compensation
and unified power flow control. The paper has
presented FACTS based solutions and a list of control
strategies to deal with the extensive use of
nonlinear/sensitive loads, renewable energy sources,
battery storage and EV-charging. Suitability and
adequacy of the FACTS devices such as SVC, D-
STATCOM, SSSC and APFs as well as LC switched
compensators have been presented. The emphasis of
the presented analysis is on energy efficient
utilization, loss reduction, voltage stabilization, power
factor, power quality and harmonic reduction at the
point of common coupling with nonlinear loads. Also,
other issues, including interfacing wind/PV farms
with weak ac electric utility systems were considered.
Future applications of FACTS devices include
renewable energy resources, residential and
commercial smart building, residential use of hybrid
DC-AC grid, increased use of vehicles-to-grid and
vehicles-tohouse, battery charging system, and street,
buildings and airports light emitting diode (LED)
lighting technology.
REFERENCES
1. Kalair A, Abas N, Kalair AR, Saleem Z, Khan N.
Review of harmonic analysis, modeling and
mitigation techniques. Renew Sustain Energy Rev
2017;78(10):1152–87.
2. Martínez EB, Camacho CÁ. Technical
comparison of FACTS controllers in parallel
connection. J Appl Res Technol 2017;15(1):36–
44.
3. Jumaat SA, Musirin I, Baharun MM. A voltage
improvement of transmission system using static
var compensator via matlab/simulink. Indones J
Electr Eng Comput Sci 2017;6(2):1–17.
4. Fadaee M, Radzi MAM. Multi-objective
optimization of a stand-alone hybrid renewable

energy system by using evolutionary algorithms: a
review. Renew Sustain Energy Rev 2012;16(5).
[3364-2269].
5. Sadaiappan S, Renuga P, Kavitha D. Modeling
and simulation of series compensator to mitigate
power quality problems. Int J Eng Sci Technol
2010;2(12):7385–94.
6. Liu L, Li H, Xue Y, Liu W. Reactive power
compensation and optimization strategy for grid-
interactive cascaded photovoltaic systems. IEEE
Trans Power Electron 2015;30(1):188–202.
7. Darabian M, Jalilvand A. A power control
strategy to improve power system stability in the
presence of wind farms using FACTS devices and
predictive control. Int J Electr Power Energy Syst
2017;85(2):50–66.
8. Sharaf AM, Gandoman FH. A switched hybrid
filter - DVS/green plug for smart grid nonlinear
loads, in Smart Energy Grid Engineering (SEGE),
2015 IEEE International Conference on; 17–19
Aug. 2015. p. 1–6.
9. Sharaf AM, Khaki B. Novel switched capacitor-
filter compensator for smart gridelectric vehicle
charging scheme, in Proc. IEEE SGE, Oshawa,
Canada; Aug 2012.p. 1–6.
10. Abdelsalam AA, Desouki ME, Sharaf AM. Power
quality improvement using FACTS power filter
compensation scheme. J Electr Syst 2013;9(1):86–
96.
11. Mahela OP, Shaik AG, Gupta N. A critical review
of detection and classification of power quality
events. Renew Sustain Energy Rev 2015;41:495–
505.
12. Velamuri S, Sreejith S. Power flow analysis
incorporating renewable energy sources and
FACTS devices. Int J Renew Energy Res
2017;7(1):452–8.
13. Crow ML. Power quality enhancement using
custom power devices. IEEE Power Energy Mag
2004;2:50.
14. Subasri CK, Charles Raja S, Venkatesh P. Power
quality improvement in a wind farm connected to
grid using FACTS device. Power Electron Renew
Energy Syst 2015;326(4):1203–12.
15. Dugan RC, Mc Granaghan MF, Santoso S, Beaty
HW. Electrical power systems quality. 2nd edition
New York, USA: Mc Graw-Hill Professional
Engineering Series; 2003.
16. Liao H, Milanović JV. On capability of different
FACTS devices to mitigate a range of power
quality phenomena. IET Gener Transm Distrib
2017;11(5):2002–12.
17. Wang X, Blaabjerg F, Wu W. Modeling and
analysis of harmonic stability in an ac power-
electronics-based power system. IEEE Trans
Power Electron 2014;29(12):6421–32.
18. Chen Z, Spooner E. Grid power quality with
variable speed wind turbines. IEEE Trans Energy
Convers 2001;16(5):148–54

A comprehensive review on D-FACTS devices

More Related Content

What's hot (20)

Similar to A comprehensive review on D-FACTS devices (20)

More from ijtsrd (20)

Recently uploaded (20)

A comprehensive review on D-FACTS devices