A Primavera Tutorial

A.Blakey
Page 1 of 82
February 2002
Prim avera Tutorial
Contents Page
1. Introduction 2
2. Getting Started 4
3. Entering Your First Activities 10
4. Establishing Your Layout 13
5. Developing The Programme 25
6. Organising The Programme
6 .1 Organizing by Work Breakdown Structure 32
6 .2 Organizing by Activity Code 43
7. Filtering the Programme 51
8. Resources 57
9. Progress Reporting 70
10. Conclusion 81
Exercises Appendix A
www.onlinecivil.tk

A.Blakey
Page 2 of 82
February 2002
1. I ntroduction
This guide is intended as a beginners guide to Primavera. By the end
it, you should be able to confidently enter information into Primavera,
and be able to present it in a sharp and meaningful manner.
This guide will also look at resources, multiple layouts, progress
reporting, filters and target programmes.
The assumption when writing this guide is that Primavera has already
been loaded onto the user’s computer. Further, it assumes no
knowledge of Primavera by the user, but it does presume a level of
computer literacy in the user.
The first thing to note about Primavera, and to bear in mind as you
work through this tutorial, is that it saves every change made while
you work. As such there is no simple “undo” button – any changes
made can only be reversed by re- entering the data. When you exit the
programme the only thing that you are asked to save is the layout that
you have defined: everything else has been auto-saved.
A recommended way of using this guide is to follow the steps first on
the example provided, then on a project which has more relevance to
you.

A.Blakey
Page 3 of 82
February 2002
Primavera does allow you to have more than one project open at any
one time – simply open or create another project and you can move
between the two projects at will by selecting the project from under
the “Window” tab at the top of the page.

A.Blakey
Page 4 of 82
February 2002
2. Getting Started
The first step is to open the installed programme:
Select the Primavera Project Planner icon in the Primavera programme
folder.

A.Blakey
Page 5 of 82
February 2002
Once Primavera has been opened, your welcome screen should look
something like this….
Note: you may be asked for a User Name and password. Unless
defined otherwise in the set up, your password is the same as the user
name. The user name is as defined in set up.

A.Blakey
Page 6 of 82
February 2002
To start on your first programme you need to select the menu “File”
and Option “New”
This will open this menu on-screen:

A.Blakey
Page 7 of 82
February 2002
Project Nam e: This is a 4 character code that will identify your
programme. It can be any alphanumeric
character.
Note that the new project will be saved in the
folder c: p3win projects. It is good practice to
set up a “Project” folder which will keep the
project files together in one place. The reason
for this is that a Primavera project consists of 24
individual files: a single folder containing several
projects would have hundreds of files in it!
Num ber/ Version: This indicates the revision number of the
programme.
Project Title: This is the title of the current project
Com pany Nam e: This is the name of the company for whom this
work is being done.
Planning Unit: This is the planning unit of the programme: it is
the minimum duration (except 0) of any activity.
It can be any unit from Hour to Month.
W orkdays/ w eek: This sets up, on your base calendar, your
working days schedule.
W eek starts on: This is the first day of the week. For instance, 5
workdays a week in a week starting on Monday
would mean Monday to Friday are work days.
In some countries there is a six day working
week, starting on Saturday. Thus there would be
6 workdays/ week and the Week starts on would
be set to Saturday.
Project Start: This is the earliest work day of the project. Note
that it may be desirable to have a Project Start

A.Blakey
Page 8 of 82
February 2002
several weeks before the first activity, in order
to be able to indicate supply/ design milestones
required for work to commence.
Project m ust finish by:This is the immutable end date of the project.
It can, however, be changed at a later date.
Decim al Places: Generally used in resource assignment and
calculation (not in calculation of the programme:
Primavera does not support fractions of a
planning unit).
NB: YOU MUST “TAB” BETW EEN FI ELDS OR MOUSE CLI CK ON
THE NEXT FI ELD TO BE ENTERED. PRESSI NG ENTER W I LL TAKE
YOU I MMEDI ATELY TO THE NEXT SCREEN AND THE DETAI LS
NOT ENTERED I N W I LL NOT BE SAVED AS PART OF THE
PROGRAMME.

A.Blakey
Page 9 of 82
February 2002
After all of this information has been entered, we have a screen that
looks like this:
Note that a separate folder in projects has been created called
house. (This was done in Internet Explorer)
Once this information has been entered click the “Add” button ( i) and
your project has been created.
3. Entering Your First Activities
i

A.Blakey
Page 10 of 82
February 2002
Upon entering your project you will be greeted by this screen:
Before continuing any further you must enter the first “Activity ID” or
activity number. All future Activity IDs will follow this number
sequentially, increasing the number by a fixed amount. The Activity ID
can be Alphanumeric.
Enter “A010” and either press enter or click the mouse cursor on the
tick. There will be a thick black line around the Activity ID box
indicating that this is the field being edited. Press the right arrow to
highlight the “Activity Description” box, and enter “Start Project” in
this field.

A.Blakey
Page 11 of 82
February 2002
Once entered, it should look like this:
Press the down arrow button (or the “plus” sign) and notice that the
Activity ID auto-increments as the new activity appears. Enter in the
next several activities so it looks like this:
The activities for your first programme have been entered.
Note that the amount by which Primavera auto-increments the next
activity can be adjusted by selecting “Tools” – “Options” – “Activity
Inserting…” from the drop- down menus.

A.Blakey
Page 12 of 82
February 2002
Finally we need to assign each activity a duration. This is done by
highlighting the “Orig Dur” box and entering in the required duration.
Enter the durations as shown below:
We are now ready to apply logic to our programme, but before we
move on we need to correct the project layout…
4. Establishing Your Layout
Using your mouse, move the cursor over the thick black line
separating the Activity details and the Gant chart until it appears as

A.Blakey
Page 13 of 82
February 2002
two vertical lines bisected by one horizontal line with arrow heads
pointing left and right.
Now press the left mouse button down and drag the cursor to the
right: once you have moved the cursor across two thirds of the screen,
release the mouse button.
Several new columns are exposed, as shown above. At this point in
time we do not need those columns.
Press F11 and this menu should appear.

A.Blakey
Page 14 of 82
February 2002
The first thing we need to do is get rid of the columns which we don’t
need. Highlight “Remaining Duration” (press the down arrow 3 times
or click on it with your mouse) and either press the delete button on
your computer or click on the “ -“sign in the top left corner of this
menu with your mouse.
“Remaining duration” should disappear and “Percent complete” should
now be highlighted. Delete this line also. Next highlight “Resource”
which should now be visible on your menu. Delete this and the next
item that appears, “Budgeted Cost”.
You should be left with this:

A.Blakey
Page 15 of 82
February 2002
Next we need to align out columns correctly. Using your arrow keys, or
by clicking on it with the mouse, highlight the “Align” of “Early Finish”.
Next press the letter “C” and enter: the Alignment should change from
left to centre. Alternatively you can highlight the down arrow symbol
next to the “+ ” sign and select “centre” from the options.
Repeat this process and centre-align Early Start, Original Duration and
Activity I D.
Finally we can adjust the column widths. Highlight the “Width” cell of
“Early Finish” and type in the number 10 and enter. Repeat this
process with “Early Start”.
In this menu we can also add columns. Highlight the empty space
under “Early Finish” then press the down arrow button we used to
select the alignment earlier. The list of columns available for adding is
then displayed. Highlight and click on one to bring it into your layout.

A.Blakey
Page 16 of 82
February 2002
Now we have our layout looking how we want it, click the “OK” button
to return to the main screen. Next highlight the black line separating
the activity detail and the Gant chart and drag it back to maximise the
Gant area visible while still displaying all of our columns.
Your screen should look something like this:
Our next aim is to format the bars. This can be done by either clicking
the “Bar” icon ( 1) , Format > Bar (from the drop- down menu), or by
pressing Ctrl+ F11.
The following menu should appear:
1

A.Blakey
Page 17 of 82
February 2002
Four bars are shown here: two of them are visible (The Early and Float
Bars). To avoid confusion, we will delete all of the bars which we do
not need to see. Highlight “Float Bar” either by pressing the down
arrow until it is highlighted or by clicking on it with your mouse; press
delete and this window should appear:
Click “Yes” and the bar should disappear. Repeat this with the “Late
Bar” and “Resource Early Bar”.
Your window should now look something like this:

A.Blakey
Page 18 of 82
February 2002
i The “position” is the position of the bar on the activity line. “1” is
central, “2” is below that and “3” is above. “4” is further below
and “5” is further above.
ii “Visible indicates that the bar is visible.
iii “Key” indicates that this is the key bar from which links are
shown
iv “Progress” Indicates that, once progressed, progress is shown on
that bar
v “Critical” indicates that if an activity is critical, it is shown as
such by being coloured as indicated (see iv overleaf)
vi “Neck” states that for periods of inactivity, such as holidays or
weekends, the bar is “necked”
i ii
iii
iv
v
vi

A.Blakey
Page 19 of 82
February 2002
i This allows you to show the bar “necked”
for periods of inactivity, such as
weekends or holidays. By default, the bars are necked when, due
to progress or resource constraints, no work can take place.
ii This option becomes relevant when a “target” or “baseline”
project has been defined, and allows yo u to show criticality on
the target bar based on either the current project or the target
project
iii Percentage complete can differ greatly from remaining duration
(a ten day activity can be 90% complete but, due to late delivery
or access problems, still have a 10 day estimated remaining
duration). This option allows you to choose which to display.
iii
ii
i
iv

A.Blakey
Page 20 of 82
February 2002
iv Finally this option allows you to mask or show the criticality of
activities on the bar or endpoints.
“Endpoints” allows you to define the type of endpoint used for the
various bars available, as well as their size and colour.
“Pattern” allows you to apply a pattern to the fill of the bar.
“Modify” allows you to further modify the details of that bar. Click on
the “Modify” button to proceed to our next step in defining our layout.
This menu will appear:
:
i
ii
iii
v
vi
iv
vii
viii
ix

A.Blakey
Page 21 of 82
February 2002
i This is the description of the bar – it can be renamed as
anything.
ii This, again, is the position of the bar. The number can be
adjusted both by highlighting it and entering in the new number,
or by clicking (with your mouse button) the up and down arrows
to the right of the box to increase or decrease the number.
iii. This is the Start and End point definition area. At the moment
they are defined as Early Start and Early Finish. However, a Late
Bar could be defined, with the Start Point defined as “Late Start”
and the Finish Point as “Late Finish”. Alternatively a Float Bar
could be shown, its start point being “Early Finish” and the finish
point being “Late Finish”.
The “Bar” category allows you to define the type of bar. It can be
a bar, a solid line or a dashed line. The “size” category would
then define the height, in pixels, of this bar.
iv. Primavera allows the definition of Milestone points, or 0 duration
target dates on your programme. This box allows you to define
the height, in pixels, of these milestones.
v. This defines whether the end point or bar is shown, or is merely
outlined.
vi. This allows you to define the colour of the bar (unless critical)
vii. “Separator” allows you to define the separating it em if more
than one data item is defined in one part of the bar. More details
of this will follow in the “Label” description section.
viii. This shows a sample of what the bar will look like.

A.Blakey
Page 22 of 82
February 2002
I f we click the “Label” tab (ix) the menu will change to this:
This allows us to add labels to our bars in various positions. The
impact that these labels will have on the layout is shown on the
sample below. Any data item from the activity detail can be added as a
bar label.

A.Blakey
Page 23 of 82
February 2002
In the same way as we have adjusted activities in other menus, alter
the bar structure layout so that it looks like this:
(Changes are indicated )

A.Blakey
Page 24 of 82
February 2002
And alter the Label layout as follows:
If you click “OK” in the “Modify Bar Definition” window and “Close” in
the bars window our layout should now look something like this:
Now we are ready to move on and develop our programme.

A.Blakey
Page 25 of 82
February 2002
5. Developing the Program m e
With our layout established we can develop our programme and apply
logic to it. It currently looks like this:
We need to link the activities together to form our construction
programme (plan or schedule).
There are several ways of nominating successors and predecessors for
activities. The quickest is to use our mouse. In order to do this we
need to turn the relationship lines option “on”. Click your mouse over
the button in the top toolbar. You can now link activities with your
mouse. Place your mouse on the bottom right hand corner of activity
A010 until a three-pronged forked arrow appears. Now depress the left
mouse button and drag to the start of the activity you wish to link to.
Try this out from A010 to A020. Once the three pronged cursor is at
the start of the activity bar you would like to link to, release the mouse
button and the link should appear:
.

A.Blakey
Page 26 of 82
February 2002
The second way of linking activities is through the Successor input
window. Highlight activity A010 and press Ctrl-J .This window appears:
You can see the activity that we have designated A010’s successor
shown here. The “Rel” column indicates the type of relationship that
exists between the two activities. In this case it is a FS – Finish to
Start, but could be a Finish-Finish, Start-Start or Start-Finish.
The Lag indicates any Lag you want to put on the link. For instance, if
it was a FS with + 3 days lag, the second activity could only start three
days after the finish of the first. Likewise a SS with + 5 days lag would
mean that the second activity could only start five days after the start
of the first.
The lag can be negative. For instance, a FS relationship with a - 3 day
lag would mean that activity two could start three days before the end
of activity one.

A.Blakey
Page 27 of 82
February 2002
Press Enter. The box should jump immediately to the next activity and
look like this:
Highlight the area underneath the “Activity ID” column heading and it
will highlight blue an area in which you can enter an Activity number.
Type in “A030” and press enter.
The programme will automatically enter in the successor’s description
and will provide a default link of Finish to Start with 0 days lag.
Instead of typing in “A030” you could merely, once a blank area has
been highlighted under “Activity ID” press the down- arrow and select
the required activity ID.

A.Blakey
Page 28 of 82
February 2002
This will appear:
Now highlight the activity that you would like to link to and click it with
your mouse. It will then appear in your successor list.
Next make A040 the successor of A030, and A050 the successor of
A040. However, we need a different kind of link between A040
(Foundations) and A050 (Floor Slabs). We know that 5 days after the
completion of the foundations the floor slabs should be in. Thus, we
can change the link type to a “FF” link and the lag to 5 days.
We also know that two days after the start of the floor slabs, we can
start on the superstructure. Thus the link from A050 to A060 is a SS
with 2 days lag.
However, we also know that we will need at least 5 days after the
completion of the Floor Slabs before the superstructure can be
completed. To show this we add a second link between A050 and
A060.
Enter in the links mentioned above, and the following:

A.Blakey
Page 29 of 82
February 2002
A060 to A070 – FS
A070 to A080 – FS with - 5 day lag
A080 to A090 – FS
A090 to A100 – FS
Then close the Successor activity box, either by pressing Ctrl-J again
or by clicking the small “x” in the top right corner of the box.
Our programme is now linked. Primavera now requires the programme
to be “scheduled” in order to calculate the new end date. Press F9 to
schedule the programme.
The result should be:
Our first problem is that the full width of the bar chart is not visible on
the screen. Move your mouse cursor over the timescale and double
left-click.

A.Blakey
Page 30 of 82
February 2002
This window should appear:
The cursor on the bar under the word “Density” is flashing. Click on
this cursor and drag it to the left and right. You will see your timescale
expand and contract. Adjust it so that the last week visible on the right
hand side of the screen is the first week in June. Release the bar-
adjusting cursor and press “OK”.

A.Blakey
Page 31 of 82
February 2002
Your screen should now look like this:
We are now ready to organise our programme.

A.Blakey
Page 32 of 82
February 2002
6. Organising the Program m e
Primavera can organise projects in two main ways: through Activity
codes and through a “Work Breakdown Structure” (WBS).
6.1 Organising By W ork Breakdow n Structure
The WBS is a structured way to lay out a programme: it can
accommodate several levels of programme. Establishing your WBS
involves typing in a mini-programme of headings.
For example:
1 Contract Start
1,1 Site Establishment
2 Demolitions
2,1 Church
2,2 Church Hall
3 Construction - Flats
3,01 New Flats - Structure
3,01,1 Basement
3,01,2 Ground Floor
3,01,3 First Floor
3,01,7 Roof
3,02 New Flats - Brickwork & Finishes
3,02,1 Basement
3,02,2 Ground Floor
3,02,3 First Floor
3,02,7 Roof
4 Construction - New Church
4,01 New Church - Structure
4,01,1 Foundations
4,01,2 Ground Floor
4,01,3 First Floor
4,02 New Church - Brickwork & Finishes
4,02,1 Ground Floor
4,02,2 First Floor
4,02,3 Roof
5 External Works
6 Handover

A.Blakey
Page 33 of 82
February 2002
For complex programmes, it is wise to establish the WBS before the
actual programming is started.
Select Data-WBS… from the drop-down menus. The following window
will appear:
This is the WBS Editor window.
The first thing we need to do here is set up the structure of our WBS.
This is done by clicking the “Structure” button.

A.Blakey
Page 34 of 82
February 2002
The following window appears:
This is the WBS Structure Editor.
We want to set up a simple two level WBS, so highlight the number 10
(this is the number of characters allowed in that level: it can be any
number from 1 to 48). We want it to be two characters wide, so type
in the number 2.
Next we need to identify the separator that will appear between fields.
Click on the box below the “2” that has just been entered and type a
“,”.
Our second level also requires a two character field: in the box below
Level 2 enter another “2” and place another “,” below it.
The easiest way to navigate this window is by clicking on the box
where information is to be added with your mouse cursor and entering
the information required.

A.Blakey
Page 35 of 82
February 2002
The WBS box should now look like this:
Click “OK” and we return to the main WBS Window.
It should now look like this:
Note that in the “Code: ” box a comma is now visible. This indicates
that we can now enter in two levels of information here.
Click on the “+ ” sign and the cursor appears in the code box, to the
left of the comma. Type in “01” and press Tab. The cursor should
move to the title box. This is the description of that WBS Heading.
Type in “House” and press enter.

A.Blakey
Page 36 of 82
February 2002
You have created the first level of your programme.
Click the “+ ” sign again and type in 0101. Note that as the cursor
reaches the comma after the first “1” it automatically moves on to the
second level of the WBS. Again press “Tab” and enter the description
“Start Up” and enter.
Enter in the following descriptions as shown

A.Blakey
Page 37 of 82
February 2002
We now need to apply this WBS to our programme. Press “OK” and
return to the programme.
There are two ways in which we can assign the WBS levels to the
programme. The first is to create a column called “WBS” and enter the
information there.
Press “F11” and highlight the space below “Early Finish” in the new
window. Then highlight the down- facing triangle next to the “+ ” sign in
the window and press the key “w”. The menu should scroll straight
down to “WBS”. Press enter and it will appear in your column
selection. Alter the alignment of this column to “Center” and alter the
width to 8.
Your window should now look like this:
Click “OK” and drag your black line between the “Early Finish” column
and the Gant chart to the right. The “WBS” column should appear.

A.Blakey
Page 38 of 82
February 2002
Now move the mouse pointer over the WBS cell of activity A010 and
click.
If you now click next to the “,” in the input area the should
becom e . This means that this “button” is now active. Click on it with
your mouse cursor and the list of data items available to place there
should appear. Highlight “01,01” and press enter: that value should
now appear in the WBS column.
Next, highlight (by clicking it with your mouse) the WBS column for
Activity A020. Simply type in the characters “0101” and press enter:
they should appear in the box separated by the comma.

A.Blakey
Page 39 of 82
February 2002
Enter the remaining WBS activity codes as follows.
We have now told Primavera HOW we want the programme organised:
now we must tell it to organise it so.
Click the “Organise” icon on the toolbar.
This window will appear:
This opens, by default, on organising by “ Activity Code”.

A.Blakey
Page 40 of 82
February 2002
Press the button by the words “Work Breakdown Structure” and the
window should change to this:
1. These are the two WBS Levels that have been defined in the
WBS Structure. This states that both are visible, and the “Font”
is the size of the heading displayed on the screen.
2. “Bkgrnd” and “Text” are the colours of the background and the
text in these headings.
3. “Sort by: ” defines how the activities are sorted within each band
4. “Options” takes you to the following window:
1
2
3
4

A.Blakey
Page 41 of 82
February 2002
While we are here, we want to display the WBS number (its value) as
well as the description in the header band. Tick the “Value” box
beneath the text (1) “Text in bands:”
Now click “OK” (2) and we return to the “Organise” window.
We can change the settings here for colours, fonts, and whether each
heading has a “Total” band at will. For now, merely highlight the Level
2 “Total Cell” and press “N” – “none” should appear in the box. Press
enter and enter again.
1
2

A.Blakey
Page 42 of 82
February 2002
You should return to his screen:
Here we see the headings we defined in our WBS layout assigned to
the activities, in the layout we asked for.
Note that the WBS headings have the number we assigned them in the
header bar.
You can summarise these bars under their respective heading by
double mouse-clicking on the header lines (* ).

A.Blakey
Page 43 of 82
February 2002
6.2 Organising By Activity Code
The second method of organising activities in Primavera is by Activity
Code. You can see the current activity codes at the Menu option
Data – Activity Codes. This window will appear:
i. This is the four letter character code assigned to this Activity
code as its nam e
ii. This is the character length of the field
iii. This is the description of the field
iv. These are the “Value”s of the component parts of that activity
code. For instance, if a Code field is called “Level” with a
length of “1” the values could be G, 1, 2, 3, 4 and the
descriptions “Ground Floor”, “First Floor”, etc.
i ii iii
iv v
vi

A.Blakey
Page 44 of 82
February 2002
v. This is the order in which those items should be sorted within
the activity code. For instance, Primavera could assume that
“G” comes after the numeric codes. In this instance we would
place a “1” in the “order” column by G, a “2” by “1 – First
Floor”, etc.
vi. “Transfer” allows us to transfer a coding structure from
another programme.
This button will take you to a window in which you can
identify the programme from where you would like the
activity codes drawn.
Highlight “RESP” in the name field and then click on “RESP” in the text
edit box ( a). Your cursor will appear in that field. Delete the characters
RESP there and replace them with “BLDG” and press Enter.
a

A.Blakey
Page 45 of 82
February 2002
Now click on the “Description” field of our new Activity Code “BLDG”
and change the description to “Building”. The length of the field can
remain at 4.
Now change “AREA” to “PHSE” and enter “Construction Ph.” as its
description.
Delete the remaining codes by highlighting them and pressing the
delete key.
The Activity Code box should now look like this:
We now need to add values to each of the Activity Codes defined.
While highlighting “BLDG” click in the Value area of the lower box. You
will be asked if you wish to save your structure edits. Primavera is
asking if you want to keep the new code structure that you have
defined and delete the old structure. Click “Yes” and highlight the
“Value” box again. Make your first Value “01” and press right arrow so

A.Blakey
Page 46 of 82
February 2002
that your cursor now rests in the description field. Type “House” and
press enter.
Highlight “PHSE” and repeat this process of entering values until you
have the following codes entered:
Then close this window.

A.Blakey
Page 47 of 82
February 2002
We can apply these codes to our programme in the same way as we
applied our WBS codes. In this instance, create two columns: one with
the data item “BLDG” and the other with the data item “PHSE”
Our Gant Chart will now look like this:
Now it is the simple matter of entering our codes. The code “01” for
“BLDG” applies to all activities, while we will encode “PHSE” to match
our WBS.
Note this change

A.Blakey
Page 48 of 82
February 2002
We now need to tell the programme to organise by our Activity Codes
rather than by the WBS. Press the “Organise” icon
And select “ Activity Data Item” as your “Organize by” data. The
window should change to this:
We want to Group our activities by the codes that we have defined.
Click under “Group by” and enter our defined codes:

A.Blakey
Page 49 of 82
February 2002
Note in the example shown the “Font” has been altered. This can be
changed by highlighting the font and selecting the required font in the
Input area.
Press “Reorganise Now” and the schedule layout should change to this:
Our colour scheme has changed in line with our new layout and
“Snagging” has moved from our previously defined heading of
“Finishes” to “Snag and Handover”.
The Activity Code form is useful in two main instances: where there is
repetition and where different layouts might be required by different
parties.
Imagine if our example had ten houses: our WBS would run for several
pages, but the Activity Code will only have to be adjusted by adding in
one code per house – a house number identifier.

A.Blakey
Page 50 of 82
February 2002
Further, in that instance a reorganisation could tell our Services
Foreman exactly what his programme will be for the ten houses. First
we would organise it by “Construction Ph.” and then by “Building”.
The below example took just a few minutes to create, organise and
sort. Note that in this example I used a “Filter” to show only the
“Finishes” activities i.e. those activities with Building Ph. Code “04”.
So how do we filter our programmes?

A.Blakey
Page 51 of 82
February 2002
7. Filtering the Program m e
Our programme should currently look something like this:
We need to create something to filter by: create an additional Activity
code, with values, as follows:

A.Blakey
Page 52 of 82
February 2002
Create a column for “FMAN” and distribute the three foremen as
follows:
We can now use our filters to sort by Construction Phase, Foreman or
a combination of the two:
Click the filter icon: , and this window will appear
1
2

A.Blakey
Page 53 of 82
February 2002
To remove confusion first delete the current filters from FL- 01
onwards. Highlight FL-01 and press the “Delete” button. Confirm that
you do wish to delete the filter when asked and the filter disappears.
Repeat this process for the remaining filters until you are left with:
Now click the “Add” button. The following window appears:
Click OK. You are then taken to:
1. This is the name of the filter – it can be renamed as anything
1
2
3
4

A.Blakey
Page 54 of 82
February 2002
2. This section defines whether, in the case that two conditions are
imposed on the filter, activities are required to fulfil all conditions
or only one of the conditions
3. In this section the filter conditions are defined. Any of the data
items defined for an activity can be used in a filter, from dates to
activity codes to resource data.
4. Here the “condition” for the filter to apply is defined. It can be
any mathematical function (i.e. < ,> , = , etc.) and any value,
either of the data item mentioned in “ 3.”, or any other data
item.
An example would be:
Here we are telling the computer to apply the filter (i.e. select and
display that activity) only if the Foreman is equal to 01 (Joe Bloggs).

A.Blakey
Page 55 of 82
February 2002
A m ore com plex filter would be:
This tells the computer to select an activity if
(i) the Foreman is 01 (Joe Bloggs) AND
(ii) the Construction Phase is “Within the Range” of (WR) 02-
04 (i.e. is 02, 03 or 04 – Substructure, Superstructure and
Finishes) AND
(iii) Has an early start date after the 1st
April 2002.
In this case, only activity A080 will be selected.
Filters are often used in large projects for progress reporting: it is
difficult to sort through hundreds of activities to find those that have
started or finished. A filter can reduce the hundreds to a few dozen.

A.Blakey
Page 56 of 82
February 2002
A useful filter for a “look ahead” view would look like this:
This states that the activity should be visible is any of the “early dates”
– either “Early Start” or “Early Finish” occur within the window “DD”
i.e. the Data Date (The date on which the programme was last
scheduled) and “DD+ 1M” (Data Date + 1 Month). Applying this filter to
our programme results in:
Only activities with a portion of their duration in the area indicated
above have been selected (the Data Date is shown by the blue line,
and is the 1 March 2002. The filter has selected activities that run
between the 1 March and the 1 April 2002).
So we have a filter that we can use when reporting progress in our
programme. Progress reporting will be covered in Chapter 9.
Until then, restore our layout to include all activities (i.e. run filter
“All”).

A.Blakey
Page 57 of 82
February 2002
8. Resources
Primavera has the facility to receive resource data, apply costs to the
resources, report these resources graphically, level the resources and
apply actual expenditure against budgeted.
The first step is to establish a resource “dictionary” of the resources
we wish to define for the project. Data > Resources opens the
following window:
1. The resource “code”
2. The units that apply to this resource (e.g. m3
, Hours, litres)
3. Whether the unit is “Driving” or not (i.e. whether the duration is
driven by the resource quantity divided by the resource output)
4. The calendar to be used when this resource is applied.
5. A description of the resource
1
2
3 5
6 7
4

A.Blakey
Page 58 of 82
February 2002
6. Resource limits (used in resource levelling)
7. The cost, if required, per unit of the resource. The cost can
reflect the monetary cost (if desired) or another aspect, such as
the number of man hours required to place a unit of the
resource. However, there are other ways to show this and this
will be discussed later.
Enter the data shown above. Each person has a normal limit of 1 and a
maximum limit of 2. The Price per unit (i.e. Cost per Day) of Bob is 50,
Mr Dixon is 35 and Wendy is 25. Nuts and Bolts are a material
resource (versus a manpower resource) and have no limits or, in this
example, a price per unit.
After entering the Price/ unit you will be asked if you would like to
calculate costs now. Select “Yes” in each instance.

A.Blakey
Page 59 of 82
February 2002
Once the resource data has been entered, close the window. Our next
step is to apply these resources to our activities. Highlight the first
activity – A010: Start Project – and press Ctrl+ R (or from the drop-
down menu, View > Resource Detail). The following window will
appear:
Now click the “+ ” sign and the down-triangle and your will be
presented with a list of resources which you can apply to this activity.
Let us assume that Bob is required to start the project – to sign the
papers and set out the works. Select “Bob” as the resource and enter
1 unit per day. The budgeted quantity should immediately become “1”
(i.e. 1 unit/ day * 1 day).
Now, with the cursor in the “Resource” box of this window (i.e.
highlighting BOB), press the right arrow to create another resource.
This time use the resource “Nuts and Bolts” and enter an amount in
the Budgeted Quantity of “10”. The number 10 should also appear in
the “Units per Day” column.

A.Blakey
Page 60 of 82
February 2002
Highlight the next activity add resources as per this table:
Act. I D Resource 1 Units/ day Resource 2 Budg.Quant.
A010 BOB 1 BOLT 10
A020 DIX 1 BOLT 5
A030 WEN 1 BOLT 20
A040 WEN 1 BOLT 25
A050 BOB 1 BOLT 20
A060 DIX 1 BOLT 15
A070 DIX 1 BOLT 15
A080 DIX 1 BOLT 20
A090 WEN 1 BOLT 10
A100 BOB 1 BOLT 5
Close the Resource window and change two of the columns to show
the resource assignments… the column titles will be “Resource” and
“Budgeted Quantity”:

A.Blakey
Page 61 of 82
February 2002
Primavera cannot, unfortunately, show more than one resource in this
view: it “lumps together” the resources so that the total Budgeted
Quantity is shown for all resources applied to that activity.
We can see how these resources are distributed across time in a
resource profile. Press the button (alternatively, from the drop-
down menu, View > Resource Profile or Ctrl+ F7).
This should appear at the bottom of the screen:
This is the resource profile for the resource (or person) “BOB” – Bob
The Builder. We can see he spends a total of 8 days on site, the
majority towards the end of March.
We need to modify this to tell us exactly what we want.

A.Blakey
Page 62 of 82
February 2002
Press the “Display” button (under the “Select” button in the Resource
Profile/ Table window) and this window will appear:
1. Would you like to see the Units or the Cost (as entered) of
those units? i.e. Units or (Cost/ Unit) x Units.
2. Would you like the graphs to show their data based on “Early
Start” dates or “Late Start” dates.
3. Should the graphs show data collected from all activities or
only the currently selected activities.
4. Gives the time interval for the graph data (i.e. a new bar in a
histogram chart or a new plot-point in a line (“curves”) graph.
5. Allows you to choose the type of graph to be displayed –
histogram or curves (line graph).
1 2 3
4 5
6
7
8
9
10
11

A.Blakey
Page 63 of 82
February 2002
The following (6 to 10) apply to histograms only:
6. Do you want the graph to display totals per defined time
interval (4.), average or peak usage.
7. Histogram format: Area ( )
or Bar ( )
8. Values – these are used once progress has been entered and
the requirement is to compare planned and actual
9. Allows you to define the calendar to be used when calculating
average resource usage (i.e. may cause a difference if a
resource is only used on a four day week when the activity
runs through a five day week)
10. Drawing of Limits and Overloads refers to resource peak
usage and levelling.
11. Refers to the resource usage curves: allows you to define
different lines for the various curves being shown.
Alternatively Primavera will use different colours to highlight
the different data lines.
More information on these can be found by pressing the “Help” button.

A.Blakey
Page 64 of 82
February 2002
Change the contents of the window to this:
Press “Close” and select the resource “BOLT” from the window in the
drop-down menu in the Resource Profile/ Table area. Your histogram
display should look like this:
This tells us that we will be using a total of about 120 bolts and their
distribution across the project. If we want to see the precise number
we should select the resource table, rather than the graph.

A.Blakey
Page 65 of 82
February 2002
Press the button (Or View > Resource Table or Shift+ F7) and
select “BOB” from the drop- down resource list. Your display should
change to:
Here we now see the weekly total number of days that each person
will be required to spend on the job, as well as the weekly total
numbers of bolts used.
Exporting this data out of Primavera is tricky… it is a case of finding
the correct report type and modifying it to your requirements.
To export this report we need to run report RL-01. It can be found
here:

A.Blakey
Page 66 of 82
February 2002
We are then faced with this menu:
Report RL-01 is already selected. Click the “Modify…” button and these
windows will appear. Make the modifications highlighted to create the
report we require. The various screens can be accessed by clicking the
“Tabs” under the Title.
Leave this selection
blank to select all
resources. If we wanted
to omit a resource (e.g.
Nuts and Bolts) we
could put the condition
“NE” (not equal to)
under profile and the
resource “NUTS” under
“Low Value Resource”

A.Blakey
Page 67 of 82
February 2002
Important points to
note here are to
Generate the report in
P3 ( 1), to organise by
Resource and produce
a summary report (2 )
and to display row
totals on the left ( 3).
The selection is
irrelevant to us – we
want a report for the
whole project.
However we could
filter for any of the
codes that we have
established, in the
same way that we
filtered the project in
Chapter 7
Finally we set the time
we require our report
to span ( 1) and the
time unit we require
the report (3). We can
also specify whether
we want the report to
show Total, Peak or
Average resource
usage ( 2).
1
2
3
1
2
3

A.Blakey
Page 68 of 82
February 2002
With this information set we can run the report. Click the “Run” button
in the top right hand corner of the window.
We want to see this report on screen so click “OK” and the Primavera
report writer will produce the required report:
To get this report into Excel format, where the data could be
manipulate and the report format modified, we can first copy and
paste this data into Microsoft Word, then copy and paste it again onto
an Excel spreadsheet.

A.Blakey
Page 69 of 82
February 2002
For instance, you will notice that due to the width of the report, it
spans two pages. We can copy and paste both pages into Excel and
reformat them to a single page.
Note that the export copies only the values of the data and formulae
will have to be replaced (e.g. the weekly totals).
A direct copy from Primavera Look to Excel WILL NOT WORK.

A.Blakey
Page 70 of 82
February 2002
9. Reporting Progress
The first thing that we should do though, is save our original
programme as a “baseline” programme against which future revisions
and progress updates can be measured.
So open and run the filter for “All Activities” (FL-01) to restore all
activities to our layout. Then save our current layout either through
the drop-down menu or by pressing Ctrl+ S.
We now need to copy this programme. Again, from the drop down
menus highlight “Copy…”:

A.Blakey
Page 71 of 82
February 2002
That will open this window:
1. Represents the programme being copied – A000 should be
highlighted under the “Projects: ” heading.
2. This section shows what you want to copy the programme to.
Ensure that the directory is correct (C: p3win projects house).
The first field required to be filled in is “Project group: ” – enter in
P101 (i.e. Progress Report 1 of programme A001). The second
field will be our Revision – to indicate that this is a progress
update
1
2

A.Blakey
Page 72 of 82
February 2002
Press the “Copy” button and the programme is copied.
Open up our newly created programme A101 through the File-Open
drop-down menu and it will open over your original programme.
We now always need to be able to compare our progressed
programme to our original or “baseline” programme. We therefore
need to call our original programme the “Target Programme”. We can
identify it as such here:
… This opens the following window:

A.Blakey
Page 73 of 82
February 2002
With the Target space beside “1” highlighted press the down arrow in
the input area and select “A000”, our original programme. Click OK
and programme “A000” is set as the Target programme of A101.
Now we need to show this target programme in order that, when
progressed, we can see the variation in the bars.
Press Ctrl+ F11 to bring up our Bar editing window. Create a new bar
under the current “Early Bar” and use these settings (changes
indicated with a ):
Click on “OK” and “Close”.

A.Blakey
Page 74 of 82
February 2002
Your display should adjust to this:
The black line indicates the “target” or baseline programme; the yellow
indicates the currently open programme. If adjustments are made to
the programme, the yellow lines will move but the black lines will
remain in their current positions.
The next step is to organise our columns for easy data entry. Press
F11 and arrange the columns like this:
That is, replace the columns created for the Activity Codes with “Actual
Start”, “Actual Finish” and “Remaining Duration”.

A.Blakey
Page 75 of 82
February 2002
Click “OK” and your display should adjust to:
We are going to report progress up to the 23 March 2002. Primavera
has a facility whereby you can highlight the activities that could be
affected by progress up to a particular date. Press the Progress
Spotlight - - button and the display will adjust to this:
The progress spotlight, by default, highlights one week after the
current Data Date. We need to adjust it to highlight the area we wish
to progress. Move your cursor over the rightmost vertical blue line and
the cursor will change to . Drag the vertical blue line to the 23
March 2002 and release. Your display should now look like this:

A.Blakey
Page 76 of 82
February 2002
The five activities affected by the progress “spotlight” are highlighted
in yellow. We can now enter our progress. This is done by entering
Actual Start and Actual Finish dates in the relevant columns. Note that
once an “Actual Finish” date is entered, the “Remaining Duration”
automatically reverts to 0.
Enter the following:
In addition to the spotlighted activities, progress has also been
entered for Activity A060: that activity has immediately become part
of the “spotlight”.
Once progress has been entered press F9 and schedule the
programme to our new date, the 23 March 2002.
The display should look like this:

A.Blakey
Page 77 of 82
February 2002
A few things to note about the progress reflected:
The projected time to completion now takes into account any links
active on that Activity. For instance, A050 only has five days remaining
duration, yet is pushed out to 9 April. The programme reflects the
FF+ 5 day link from A040, which is due to finish on the 2 April, 1 week
earlier.
Other necks are reflections of weekends and non-work periods. For
instance, the period of time immediately after the new Data Date is a
weekend: there is no activity over a weekend so the bar is necked.
Finally we can see the slippage suffered as a result of lack of progress
in a column called “Variance Target 1 Early Finish” – this column
measures the difference, in days, between the Early Finish of this
programme and the Early Finish of the Target Programme.
Here we can see that the late start of the project pushed back the
initial activities by 1 day: later delays in foundations resulted in 7 days

A.Blakey
Page 78 of 82
February 2002
being lost. Some early work on the superstructure has allowed us to
recapture 1 day: the overall loss currently is 6 days behind
programme.
For the next progress update, copy the previous progress update into
a new programme and report progress there. Primavera allows two
targets to be nominated – slippage (or gains) on t he end date can then
be measured against the previous update and the baseline
programme.
So we’ve measured time, but how can we compare budgeted resource
usage with actual?
Highlight activity A010 and press Ctrl + R. Your resource window
should open.
We can enter actual resource usage in the “Actual this period” and
“Actual to date” slots. If we imagine a situation where BOB lost his
bolts and had to buy more, and as a result had to work overtime to
get the job done, we could enter “1.5” as BOB’s Actual to date and

A.Blakey
Page 79 of 82
February 2002
“20” as the Actual to date BOLT usage. The Variance should
automatically update to “ - 0.5” and “ - 10”, indicating that there was
overuse of resources by BOB (0.5 days) and BOLTS (10 No.).
Act.
I D
Resource
1
Actual
to
Date
To
Com plete
Resource
2
Actual
to
Date
To
Com plete
A0 1 0 BOB 1.5 0 BOLT 20 0
A0 2 0 DIX 3 0 BOLT 10 0
A0 3 0 WEN 1.5 0 BOLT 15 0
A0 4 0 WEN 5 7 BOLT 10 20
A0 5 0 BOB 5 2 BOLT 10 15
A0 6 0 DIX 2 19 BOLT 2 15
After entering these, display the resource histogram and select, from
your Display options, all three curves (however do not select “Show
curves using different line types”). Select “BOLT” as the resource you
would like to see the display of.
Your display should look like this: notice how the higher bolt usage has
peaked the histogram early, and the overall increase has pushed the
totals up from around 140 No. to over 160 No.

A.Blakey
Page 80 of 82
February 2002
The precise numbers can be gained by moving the mouse over the
part of the line for where you would like the values and right-clicking
with your mouse button.
If the report we generated previously is run again it will accommodate
the increased resources expended to date, and increase the projected
totals. Thus the data can be exported to Excel and a comparative
graph created.

A.Blakey
Page 81 of 82
February 2002
10. Conclusion
This guide has taken you through the basic functions of Primavera. It
has also given a firm grounding in navigating the menu options in
Primavera and entering data.
Armed with this information, and using Primavera’s extensive help
function, it is recommended that you further look into using multiple
calendars, constraints and the powerful “Global Change” function.
For further general practice it is recommended that you access
Primavera’s tutorial functions (the button in the top toolbar will
access these lessons.

A.Blakey
Page 82 of 82
February 2002
Appendix A
Exercise 1
1. Take your original programme and organise it by activity code.
Now copy the entire programme (highlight all activities, copy,
paste under the last activity – you will be asked how you would
like the activities renumbered: select Rename all Activities:
Auto-increment . For more information use the help function in
this window)
2. Assign your new activities to a new “Building” activity code –
House and assign the correct construction phase activity codes
to the activities.
3. Try reorganising your activities now on construction phase, then
building. Link your activities so that each construction phase
does not overlap
4. Rerun your resource histograms.
5. Repeat this process and add houses 3 and 4. Try filtering by
foreman and work phase.

A Primavera Tutorial

More Related Content

Similar to A Primavera Tutorial (20)

More from Aaron Anyaakuu (20)

Recently uploaded (20)

A Primavera Tutorial