A0440113

IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE)
e-ISSN: 2278-1676 Volume 4, Issue 4 (Jan. - Feb. 2013), PP 01-13
www.iosrjournals.org

Convergence Towards Next Generation Wireless Networks
Ritesh C Sadiwala
Senior Engineer, Indian Telephone Industries & Research Scholar, RKDF University Bhopal

Abstract: The communications sector is undergoing significant changes, with the emergence of a number of
platforms available to provide a different range of services. Some of these platforms are complementary, others
are competitive, or can provide a valid substitute for some of the services provided. Till now, the most important
communications platform in most of the countries is the public switched telecommunication network (PSTN),
which provides access to all households and buildings across most countries. This paper focuses on the area
where the most significant changes are taking place in the communications sector. This paper gives a
description of the wire line and wireless (NGN) networks, its basics, its transformation to wireless technology,
need for convergence towards next generation networks and the future of NGN networks. The focus is on the
next generation access and core networks, it is because they are changing the public switched
telecommunication networks, the changes taking place in the PSTN are considerable. For over 100 years
copper has been used as the transmission technology in the local loop to connect each home and building to the
telecommunication network. Copper is increasingly being replaced by fibre in the local loop while packet-based
technology using the Internet Protocol is replacing existing circuit-based switching technologies. This paper
describes the need of wireless technology, why and how it becomes essential in terms of technological, social
and economic need of the society. It tells us about how the circuit switched technology has been switched to IP
technology and how the PSTN networks, which are circuit switched will be converted to packet-based networks
These changes affect existing regulations and policy frameworks, convergence, investment and choice in the
market place. Finally it concludes with the latest developments, which are going on in Wireless systems.
Index Terms – PSTN, NGN, Convergence, LTE

I. INTRODUCTION
Communication networks have become a key economic and social infrastructure in today‘s
economic scenario. The network infrastructure supports all economic sectors, which is crucial to the national
and international exchange of goods and services, and acts as a main catalyst in changing economic
interrelationships through rapid technological change and the proliferation of a range of new services. With the
development of the Internet the role of the communication networks has evolved and their importance has
increased. The advent of higher access speeds, in many cases symmetric speeds, available to business and to
residential subscribers, has also increased the role of communication infrastructures by expanding the available
range of services. High speed networks are increasingly helping resolve ongoing societal concerns in areas such
as the environment, health care and education, and are increasingly playing a role in social networking.
However, for the potential of new network technologies to be realised, the market will require that these
networks have universal, or close to universal coverage. The full potential of networks is only likely to be
achieved where markets are effectively competitive and solutions have been implemented which ensure
adequate coverage to most of the geographic areas. in the telecommunication sector has increased in recent
years to a large extent by the high demand for broadband data access, broadband being one of the latest
technologies with the fastest growth in penetration rates. Technological innovation, stimulated through
digitalisation, has been a major factor in driving change in the communications market. This innovation is
reducing costs and enhancing the capability of networks to support new services and applications. A key
innovation which is expected to bring further significant changes in the communications market is the
transformation from circuit-based public switched telecommunication networks to packet-based networks using
the Internet Protocol, so-called next generation networks (NGN). NGN is expected to completely reshape the
present structure of communication systems and access to the Internet. The present structure of vertically
independent, although interconnected, networks may be transformed into a horizontal structure of networks
based on Internet Protocol. The developments in new communication structures and the impetus they are
expected to give to the present process of convergence in networks, services and terminals are expected to grow
to a larger extent in future. In particular, convergence and the development of the NGN may require a review of
a number of elements of the present structure of economic regulation of communication markets, in order to
ensure that regulation allows the potential benefits of these technologies to rapidly diffuse in economies and
societies. Convergence, by changing service boundaries, service characteristics and stimulating the offer of new
services, may require that new markets are regulated differently than existing ones, and this will be possible
only by enhancement and development of Next Generation Wireless networks.
www.iosrjournals.org 1 | Page


II. ABOUT PSTN
The public switched telephone network (PSTN) is the network of the world's public circuit-switched
telephone networks. It consists of telephone lines, fiber optic cables, microwave transmission links, cellular
networks, communications satellites, and undersea telephone cables, all inter-connected by switching centers
,thus allowing any telephone in the world to communicate with any other. Originally a network of fixed-line
analog telephone systems, the PSTN is now almost entirely digital in its core and includes mobile as well as
fixed telephones. Historically, incumbent operators typically ran one network — the Public Switched Telephone
Network (PSTN). The PSTN was designed to carry voice when voice was the only communication carried. As
demand for data communications developed the incumbents adapted their networks to also carry data traffic.
However, typically, rather than replacing the PSTN operators typically built new networks that they ran in
parallel – which is called the overlay network. These new overlay networks were designed specifically to carry
data traffic. As network technology continued to develop, the number of networks multiplied in step. As a result,
today, many operators run typically 5-10 different network platforms (ATM, IP, Frame Relay, ISDN, PSTN,
X.25 etc.). The problem with this multi-network approach is that it has created a web of complexity resulting in
management complexity, operational inefficiencies, smaller economize of scale, maintenance issues, and
duplicating capex.
One such PSTN switch as shown in Figure 2.1 is of Alcatel Lucent OCB-283, which was used by
BSNL and MTNL, TATA, etc operators presently to run their landline and broadband network. The 1000 E10
(OCB283) exchange, also known by its shorter name as the E10 (OCB283), is designed for evolving networks
and the need to rationalize equipment operation. Its modular architecture means that new services can be added
and processing capacity can be increased without interrupting operation of the exchange. OCB 283 is digital
switching system which supports a variety of communication needs like basic telephony, ISDN, interface to
mobile communication, data communication etc. Telecommunications networks are constantly changing. The
rapid growth of the digital network, mobile network and intelligent network and the proliferation of new
services constantly being offered to subscribers mean that equipment must be continuously adapted to new
requirements. The 1000 E10 (OCB283) exchange, also known by its shorter name as the E10 (OCB283), is
designed for evolving networks and the need to rationalize equipment operation. Its modular architecture means
that new services can be added and processing capacity can be increased without interrupting operation of the
exchange. The E10 (OCB283) is a multipurpose exchange. It can be used for a specific function as well as to
combine several applications in the same equipment. The multipurpose properties of the E10 (OCB283) mean
that it can be used in widely varying contexts. The E10 (OCB283) configuration provide solutions for the
following:
a) The application for which it is intended (local switching center, international switching center, etc.)
b) The environment (urban area, rural area).
c) The volume and type of the traffic to be handled.
d) The resources of the telecommunications network to which it is connected. The E10 (OCB283) can be used
for all switching applications local switching center, regional or national transit center, international transit
center, intelligent network service access point, mobile service access point.
e) The E10 (OCB283) can also provide the STP (signaling transfer point) function of the Nº 7 signaling
network.

Figure 2.1. PSTN (OCB-283) Switch in a Wireline network .



BSC: Base Station Controller
BTS: Base Transceiver Station
CN: Digital Concentrator
CSN: Subscriber Digital Access Unit
PRAD: Primary Rate Access, Directly connected to the exchange
SCP: Service Control Point
SMP: Service Management Point

Figure 2.2 General Architecture of PSTN System

General Architecture of PSTN Switch as shown in Figure 2.2 has three basic subsystems: -
1)Subscriber Access Subsystem
2) Connection and Control Subsystem
3) Operation and Maintenance Subsystem

1) SUBSCRIBER ACCESS SUBSYSTEM
This is treated as an independent entity. Every Subscriber Connecting Equipment Rack is given a
Signaling Point Number to operate in Common Channel Signaling mode with rest of the exchange Subsystems.

2) CONNECTION AND CONTROL SUBSYSTEM
This unit includes control functions and connection and switching Equipments. Control Functions has
common control equipments which process, monitor and control the call setup and release. Connection and
switching block comprises of Switching matrix equipment for performing digital time switching of speech path.
Connection equipments for connecting PCM (DIGITAL) Junctions from other exchanges and RSU‘s. Auxiliary
Equipments for Tones, Frequencies and other auxiliaries for signaling protocol handling.

3) OPERATION AND MAINTENANCE SUBSYSTEM
This section is used for Operation and Maintenance of exchange by operators. The functional
architecture of the PSTN System as shown in Figure 2.3 comprises of following distinct components:



Figure 2.3 Functional Architecture of PSTN System

A) SWITCHING NETWORK
These provides facility for CONNECTING the LRs (internal PCM‘s) coming from connection units
and performs Switching Operation for Calling Subscriber TS onto called Subscriber TS and vice versa for a two
way connection per call of telephony. In an Electronic Stored Programme Control Digital Exchange like OCB –
283, all operation and maintenance activities are performed by a unit called O&M unit or OMC(Operation and
Maintenance Centre).This provides access for Man machine dialogues for the human operators to interact and
command the working of Exchange Equipments. The function of the operation & maintenance subsystems are
carried out by the operation & maintenance software (OM). The operating authority accesses all hardware &
software equipment of the PSTN system via computer terminals belonging to the operation and maintenance
subsystems: consoles, magnetic media, and intelligent terminal.

B) CONNECTION UNITS
These provide facility to connect a subscribers loop or circuits from an external PCM and transfer these
speech samples on to selected Time slots called voice channels on a LR link (internal PCM) towards switching
matrix and vice versa.

C) CONTROL UNITS
These units provides control of calls on the basis of Stored programmes. They process the calls on
reception of dialled digits from calling subscriber/circuit and take part in handling of call setup and release by
processing, monitoring, measuring charging of calls and all other common control functions needed for working
of an Automatic Common control Exchange.



II.I System Architecture of PSTN System

A PSTN system comprises of following hardware units:
1) Subscriber Access Units (CSNL, CSND, CSED)
2) Trunks and Junction connection Units (SMT)
3) Switching Matrix (SMX)
4) Auxiliary Equipments (SMA)
5) Control Units (SMC)
6) Communication multiplexes (MIS & MAS Token rings)
7) Time Base generator (STS)
8) Operation and Maintenance Unit (SMM)
The subscriber connection units CSN, SMTs and SMAs are connected to switching network through PCM links.
The interchange of messages between SMT, SMX, SMA and control units SMCs takes place on ‗MAS‘ token
rings. The control units interchange messages with one another and with SMM on ‗MIS‘ token rings.
The SMM is the O&M function unit & is duplicated as SMMA & SMMB. These are in Pilot/Standby mode.
The SMCs are the units, which hold control functions MR, TR, TX, MQ, PC, GX and these
FUNCTIONAL units are in software form and are duplicated except MR, which can be more than two. The
duplicated functions work in load sharing mode (except PC which works in Pilot/Standbye mode) hence SMCs
can be minimum 2 and maximum 32 as per design.The SMA stations hold the ETA &PUPE functions and these
are also minimum 2 to maximum 32.SMT station which is the interface for the external PCMs is made of
duplicated hardware and can handle either 32 PCMs if SMT1G or 128 PCMs if 2G. The SMT‘s hardware is
fully duplicated and functions P/R mode

III. ABOUT NGN
Next Generation Network (NGN) is a packet-based network able to provide services including
Telecommunication Services and able to make use of multiple broadband, QoS-enabled transport technologies
and in which service-related functions are independent from underlying transport-related technologies. It offers
unrestricted access by users to different service providers. It supports generalized mobility, which will allow
consistent and ubiquitous provision of services to users. Next Generation Mobile and Wireless Networks
(NGMWNs) plays central role to bring together the users, operators, and application developers. From an end-
user‘s point of view, NGN should consistently present him/her with the same personalized services whatever the
network that serves him/her and whatever the terminal technology he/she uses. From applications developers‘
point of view, NGN offers resources and interfaces Application Programming Interfaces ―APIs‖ through which
the applications are deployed. From an operators‘ point of view, NGN is concerned with provisioning and
guaranteeing end to end (e2e) Quality of Service (QoS) in the context of all-IP heterogeneous network. In order
to meet with such high expectation, NGN network have gone through many changes to come up optimized
network design without incurring major changes to network infrastructure. Next Generation Networks aim to
reverse the clock and go back to the simplicity of one single network. NGN is all about deploying one network
platform capable of supporting all traffic types while facilitating service innovation simplifying the network and
streamlining the support structure NGNs can also be defined in terms of their technical characteristics which are
as follows:

(i) IP-based network: A single IP-based core network handling the full range of telecom services. Next
generation core networks‖ generally cover the migration from multiple legacy core networks to IP-based
networks for the provision of all services. This means that all information is transmitted via packets. Packets can
take different routes to the same destination, and therefore do not require the establishment of an end-to-end
dedicated path as is the case for PSTN-based communications.

(ii) Packet-based, multi-purpose: In NGN different kinds of applications can be transformed into packets,
labelled accordingly and delivered simultaneously over a number of different transport technologies, allowing a
shift from single-purpose networks (one network, one service), to multi-purpose networks (one network, many
services). Interworking between the NGN and existing networks such as PSTN, ISDN, cable, and mobile
networks can be provided by means of media gateways.

(iii) Separation of transport and service layer: This constitutes the key common factor between NGN and
convergence, bringing about the radical change in relationship between network ―layers‖ (transport
infrastructure, transport services and control, content services and applications). In next generation networks
service-related functions are independent from underlying transport-related technologies as shown in Figure 3.1.
The uncoupling of applications and networks allow applications to be defined directly at the service level and


provide seamlessly over different platforms, allowing for market entry by multiple service providers on a non-
discriminatory basis. Distributed rather than centralized switching, routing and network intelligence enabling
remote access, control and maintenance.

Figure 3.1 Separation of Layers in NGN

NGNs also have important service characteristics:

a) Continuity – Consumers will be able to continue to use those PSTN services they are used to, with essentially
no change.
b) Ease of migration – Consumers will be able to migrate seamlessly to new services offered by the same
operator.
c) Single access to multiple services – Driven by the separation of the service layer from the network layer.
d) Innovative new services – New services will have richer functionality (e.g. personalised, location-aware), and
reduced time-to-market, since they exploit the distributed intelligence inherent in an NGN.
e) Empowerment – Consumers will have an increased capability to configure and manage services to meet their
personal requirements.

III.I Network Architecture of NGN

In contrast to the circuit-switched model of previous systems, NGN also referred as ―Long Term
Evolution (LTE)‖ has been designed to support only packet-switched services. It aims to provide seamless
Internet Protocol (IP) connectivity between user equipment (UE) and the packet data network (PDN), without
any disruption to the end users‘ applications during mobility. While the term ―LTE‖ encompasses the evolution
of the Universal Mobile Telecommunications System (UMTS) radio access through the Evolved UTRAN (E-
UTRAN), it is accompanied by an evolution of the non-radio aspects under the term ―System Architecture
Evolution‖ (SAE), which includes the Evolved Packet Core (EPC) network. Together LTE and SAE comprise
the Evolved Packet System (EPS).EPS uses the concept of EPS bearers to route IP traffic from a gateway in the
PDN to the UE. A bearer is an IP packet flow with a defined quality of service (QoS) between the gateway and
the UE. The E-UTRAN and EPC together set up and release bearers as required by applications.

Figure3.2 NGN Network Architecture


NGN Network Architecture as shown in Figure 3.2 consists of Network Elements, which are as under

1.Packet based networks:-Trend is to use IP based networks over various transport possibilities (ATM, SDH,
WDM…).IP based networks must offer guarantees of Quality of Service (QoS) regarding the real time
characteristics of voice, video and multimedia.

2. Access Gateways: - It allows the connection of subscriber lines to the packet network converts the traffic
flows of analogue access (Pots) or 2 Mb/s access devices into packets,provides subscriber access to NGN
network and services.

3. Trunking Gateways: - It allows interworking between classical TDM telephony network and Packet-based
NGN networks, converts TDM circuits/ trunks (64kbps) flows into data packets, and vice versa.

4.Softswitch/MGC: - MGC referred to as the Call Agent or Media Gateway Controller (MGC) which provides
the ―service delivery control‖ within the network,in charge of Call Control and handling of Media Gateways
control (Access and/or Trunking) via H.248 protocol. It performs signalling gateway functionality or uses a
signalling gateway for interworking with PSTN N7 signalling network and provides connection to Intelligent
Network /applications servers to offer the same services as those available to TDM subscribers

5. Application Server (AS):- A unit that supports service execution, e.g. to control Call Servers and NGN
special resources (e.g. media server, message server).

6. H.248 Protocol :-It is also known as ‗MEGACO‘is a standard protocol, defined by ITU-T, for signalling and
session management needed during a communication between a media gateway, and the media gateway
controller managing it.H.248/MEGACO allows to set up, keep, and terminate calls between multiple endpoints
as between telephone subscribers using the TDM.

7. SIP :- Session Initiation Protocol in order to handle call establishment, maintenance and termination from
packet mode terminals.

8. Signalling Gateway (SG):- A unit that provides signalling conversion between the NGN and the other
networks (e.g. STP in SS7).

9.ENUM:-Electronic Numbering is a Protocol that allows to establish a correspondence between the traditional
telephone numbering (E.164 ) and the network addresses related to the packet mode networks ( RFC 2916
"E.164 number and DNS" IETF).

10. MPLS:- Multiprotocol Label Switch or protocol that assigns labels to information packets in order to allow
the node routers to treat and route flows in the network paths according to established priority for each category.

11.CAC:- Call Acceptance Control function in order to accept/reject traffic in the network that allows guarantee
of QoS for services with a Service Level Agreement

12. BGP :- Border Gateway Protocol to negotiate flow routing procedures and capacities across different NGN
network domains.



IV. Functional Architecture Of NGN

Figure 4.1 NGN Functional Architecture
Functional Architecture of NGN as shown in Figure 4.1 consists of three gateways as under
A) PDN Gateway (P-GW)
B) Serving Gateway (S-GW)
C) Mobility Management Entity (MME)
(A) PDN Gateway (P-GW): - The core network (called EPC in SAE) is responsible for the overall control of
the UE and establishment of the bearers.in addition to these nodes, EPC also includes other logical nodes and
functions such as the Home Subscriber Server (HSS) and the Policy Control and Charging Rules Function
(PCRF). Since the EPS only provides a bearer path of a certain QoS, control of multimedia applications such as
VoIP is provided by the IP Multimedia Subsystem (IMS), which is considered to be outside the EPS itself. The
PDN Gateway is responsible for IP address allocation for the UE, as well as QoS enforcement and flow-based
charging according to rules from the PCRF. It is responsible for the filtering of downlink user IP packets into
the different QoS-based bearers. This is performed based on Traffic Flow Templates (TFTs). The P-GW
performs QoS enforcement for guaranteed bit rate (GBR) bearers. It also serves as the mobility anchor for
interworking with non-3GPP technologies such as CDMA2000 and WiMAX networks.
(B) Serving Gateway (S-GW): - All user IP packets are transferred through the Serving Gateway, which serves
as the local mobility anchor for the data bearers when the UE moves between eNodeBs. It also retains the
information about the bearers when the UE is in the idle state (known as ―EPS Connection Management —
IDLE‖ [ECM-IDLE]) and temporarily buffers downlink data while the MME initiates paging of the UE to
reestablish the bearers. In addition, the S-GW performs some administrative functions in the visited network
such as collecting information for charging (for example, the volume of data sent to or received from the user)
and lawful interception. It also serves as the mobility anchor for interworking with other 3GPP technologies
such as general packet radio service (GPRS) and UMTS.
(C) Mobility Management Entity (MME): - The Mobility Management Entity (MME) is the control node that
processes the signaling between the UE and the CN. The protocols running between the UE and the CN are
known as the Non Access Stratum (NAS) protocols. The main functions supported by the MME can be
classified as
(i) Functions related to bearer management – This includes the establishment, maintenance and release of the
bearers and is handled by the session management layer in the NAS protocol.
(ii) Functions related to connection management – This includes the establishment of the connection and
security between the network and UE and is handled by the connection or mobility management layer in the
NAS protocol layer

V. Convergence and NGN
Convergence in network technologies services and in terminal equipment is at the basis of change in
innovative offers and new business models in the communications sector. The utilization of the term
―convergence‖ represents the shift from the traditional ―vertical silos‖ architecture, i.e. a situation in which
different services were provided through separate networks (mobile, fixed, CATV, IP), to a situation in which
communication services will be accessed and used seamlessly across different networks and provided over
multiple platforms, in an interactive way. Today‘s consumers demand is for communications: one-way (video,
traffic reports, location, etc,), two-way (traditional voice, e-mail, etc.), symmetrical (traditional voice calls, e-
mails, etc) or asymmetrical (file downloads, movies, etc.). The communications may be fixed, mobile,



interactive, or unidirectional. With the technology and the move to IP protocol, all of these features can be
handled in a few devices and networks – maybe only one. The full integration and convergence of the networks
is only beginning to emerge.

V.I WHAT IS CONVERGENCE
The path towards convergence was led mainly by the increasing digitalisation of content, the shift
towards IP-based networks, the diffusion of high-speed broadband access, and the availability of multi-media
communication and computing devices. Convergence is taking place at different levels:
(i) Network convergence – It is driven by the shift towards IP-based broadband networks. It includes fixed-
mobile convergence and ‗three-screen convergence‘ (mobile, TV and computer).

(ii) Service convergence – It enables stemming from network convergence and innovative handsets, which
allows the access to web-based applications, and the provision of traditional and new value-added services from
a multiplicity of devices.

(iii)Industry/market convergence – It brings together in the same field industries such as information
technology, telecommunication, and media, formerly operating in separate markets.

(iv) Legislative, institutional and regulatory convergence – It includes protocols taking place between
broadcasting and telecommunication regulation. Policy makers are considering converged regulation to address
content or services independently from the networks over which they are provided (technology neutral
regulation).
(v) Device convergence –It helps devices to include together a microprocessor, a screen, storage, input device
and some kind of network connection so that together they provide multiple communication functions and
applications.
(vi)Converged user experience:-It makes unique interface between end-users and telecommunications, new
media, and computer technologies. The process towards convergence has been based on an evolution of
technologies and business models, rather than
a revolution. This process has led to entry of new players into the market, increasing competition among players
operating in different markets and the necessity for traditional operators to co-operate with companies
previously in other fields. As a result, convergence has become an important part for the telecommunication
sector.
Table 5. Comparison between existing network and IP-based converged network
Existing Next generation converged
Networks Networks
Single purpose Multi-purpose networks
networks
PSTN, cellular, IP network (providing voice,
broadcast video and mobile services)
Narrowband Broadband
Vertical Silos Destroys
compartmentalization
i.e,Traditional boundaries
between industry segments
(e.g., telephony, cableTV,
broadcasting, wireless) are
blurring and Need to re-think
market definitions (product
definition and geographic
boundaries definition)
Network-service New services and content
link developed independently of the
network
Operators Increased consumer control
control services
to end users



VI. NGN Drivers and Its Impact on Telecom Sector
NGN is an evolutionary process and it can be expected that operators will take different migratory
paths, switching to NGN while gradually phasing out existing circuit networks, or building a fully-IP enabled
network from the outset. Telecommunication operators across the world have been faced with a decline in the
number of fixed-line telephone subscribers, coupled with a decrease in average revenue per user (ARPU), as a
result of competition from mobile and broadband services. Traditional sources of revenue (voice
communications) have declined rapidly and fixed-lines operators are subject to an increase in competitive
pressure in the market to lower tariffs and offer innovative services. This has generated pressure from the
investors‘ community to decrease the cost and complexity of managing multiple legacy networks, by
disinvesting from non-core assets and reducing operational and capital expenses. The investment in developing
NGN is motivated by several factors, which are given below

Table 6. Reasons for NGN Networks
TECHNOLOGICAL ECONOMIC SOCIAL REASONS
REASONS REASONS
Obsolescence of legacy Erosion of Demand for innovative,
networks, plus cost and fixed line voice high bandwidth,services
complexity in managing call (HDTV, VoIP, etc).
multiple legacy revenues.
networks.

Lower capital and Competitive Demand for more
operational expenses. pressure from targeted or
new entrants in personalised content (on-
high-margin demand multimedia
sectors of the services, mobility).
market
Increased centralization Saturation of Demand for increased
of routing, switching and both Fixed and interactivity: possibility
transmission, lower Mobile to interact actively with
transmission costs over telephone the service, growing
optical networks. services. interest for user-created
content.
IP-based networks Retain and Demand for evolved and
enable the expand users‘ more
provision of cheaper base flexible forms of
VoIP lower customer communications,
services as a churn including instant
replacement for messaging, video-
PSTN voice services. conferencing, P2P, etc.
IP-based networks Ability to Business demand for
enable the expand into integrated services,
provision of a wider new particularly in case of
range of market multi-national structures.
services, and allow segments
bundling of services
(triple and quadruple
play).
Evolution and Possibility of Guaranteeing a flexible
convergence of investment in and secure access to
terminal equipment. phased centralized resources and
approach for intelligence.
investment,
initially
targeting more
densely
populated
areas, and then
gradually
expanding in
other areas



VII. MIGRATION TOWARDS NGN
Next Generation Networks do not represent a specific technology but rather a system and a market
concept enabled by combination of different advance technologies. The basic features of NGN are range of
access platforms, independence and range of service architecture, different migration paths and timing.
The drivers for migrating to NGN are different for different players viz. reducing their network infrastructure
and maintenance costs, enabling faster service deployment for the provisioning of enhanced services and
therefore creating new sources of revenue. The high flexibility, low cost and wide support throughout the world
for the Internet Protocol makes it the best option for building NGNs, even though it has some limitations that
need to be overcome for example the lack of guaranteed QoS and security requirements. Network operators will
potentially choose a different migration path depending on their existing assets. Each path may therefore involve
different technologies and happen at different pace. For circuit-switched network operators, a multi-service
network for converged services and more revenues represents the main driver for the migration to NGNs.
However, a migration also imposes various direct and indirect costs including network upgrades, staff retraining
costs, organization process changes, etc. Moreover, some circuit-switched networks specially the cellular mobile
systems are still in a very good state and provide quality telephony services, which are currently difficult to
replicate on a large-scale in IP based networks.
Packet-switched data networks rely on several technologies and a number of protocol stacks are used
depending on the service delivered and the functionality offered by each protocol, e.g. ―IP over SDH over
DWDM‖, or ―IP over ATM over SDH over DWDM‖, or ―IP over Ethernet over SDH over DWDM‖. The
migration towards NGN for these types of networks means a simplification of the network and more flexibility.
Building an NGN network also means that the network needs to support converged services including voice and
real-time applications. The migration of packet-based networks towards NGN can follow several strategies that
could possibly be combined. A migration to NGN could also involve a move towards the next version of the
Internet Protocol, IPv6.
NGN concept also implies many different types of ―Convergence‖;
1. PSTN/ISDN convergence with IP based networks.
2. Fixed – Mobile convergence (FMC).
3. Broadcast (Cable) – Telecommunications convergence.
4. Web based services convergence
The convergence towards Next Generation Networks also requires that customers of different market players,
using different network technologies, can communicate with each other and access resources on another market
player‘s network. This requires the interworking of different Naming, Addressing and Numbering systems. Two
main standardised numbering solutions, which can be discussed for NGN, are ENUM and TIPHON.
In order to convert a PSTN network to NGN network three parts has to convert from PSTN to NGN. Firstly call
control mechanism of PSTN has to be converted to soft switch where all the functionalities are governed by a
single call server, secondly circuit based switching has to be replaced by IP based switching governed by
MPLS(Multi protocol Label Switching) where switching is done by routers so that the congestion of the data
should be minimal and data can be forwarded by any path, several paths are designed by routers and the
call/data will move by the shortest path available and with fastest speed. Thirdly PSTN interfaces are changed
by NGN gateways. These gateways work on standard protocols as defined by industry standard so as to reduce
the time taken by the data to reach the destination as well as they are supported by IP platform. Further the TDM
transport network has been converted to a common IP MPLS platform in order to have a common platform for
transporting all types of data and information. The designed migration of PSTN to NGN is shown in Figure 7.1



PSTN to NGN

Figure 7.1 PSTN to NGN Migration
A fully converged NGN Architecture is presented in Figure 7.2, which shows a converged network along with
its protocols and its key IMS components

Figure 7.2 A Fully Converged NGN Network
The description of IMS components of an NGN network is given below
Table 7. IMS Key Components
Network Function Role Origin
Call Session Control Handles SIP Proxy Servers,
Function (CSCF) registration Developed from
of end points, scratch
routing of
SIP signaling
messages
Home Subscriber One-stop HLR from mobile
Server (HSS) database for network
user
information
Media Gateway Softswitch Softswitch
Control Function Media
(MGCF) Gateway
Control
Application Server Provide Feature Servers,
(AS) service logic Feature sets from
for Softswitches
applications
Policy Decision Provides Existing Policy
Function (PDF) QoS Managers, from
scratch



VIII. CONCLUSION AND FUTURE WORK
This paper gives an indepth knowledge of PSTN and NGN systems. An ongoing research is presented
for the wireline and wireless systems, describing the features of both the systems. This paper summarizes the
key challenges and benefits for Service Providers (SPs) that plan to migrate from PSTN to NGN
 The PSTN convergence is necessary to help SPs lower their overall cost structure. Migrating the PSTN
traffic to NGN will increase the utilization in NGN and help SPs' lower NGN cost structure.
 SPs are rolling out major broadband access transformation programs. A strategy that couples the PSTN
migration and the access transformation will help minimize the PSTN migration costs.
 A seamless co-existence of NGN with some consolidated/integrated parts of the PSTN is a more realistic
target over the short and intermediate terms. A key limitation in the delivery of hybrid services is the
distribution of point codes in NGN.
 A staged migration to a target converged NGN architecture is recommended. Further the need of
convergence is explained, showing why now it has became necessary to shift from PSTN to NGN by giving
the reasons on social, technological and economic front. This paper is a research work of the practical
systems of communication. A lot of detailed work has been given on NGN systems in this paper but some
issues such as on secure interoperability between and among the networks, the pricing of both the wholesale
and retail services, and on the open or closed architecture of the systems are remaining which will be covered
as future work.
In conclusion, we believe that maintaining the status quo has increasingly become cost prohibitive for the
service providers. As the number of PSTN lines continues to drop as a result of wireless substitution and VolP
over broadband adoption, service providers need to transform the legacy PSTN network with new technologies
to lower their cost structure. NGN has emerged as the prevalent consensus in the telecom industry. Strategies
that couple the PSTN migration with broadband access transformation can significantly reduce the cost of
migration and is proven to result in a positive business case. Therefore, we conclude that the industry has
reached the tipping point for large-scale migrations of the PSTN services to NGN systems.

REFERENCES
[1] Dave Wisely, ―IP for 4G‖, Wiley India, 2011.
[2] International Telecommunication Union, Ruling the New and Emerging Markets in the Telecommunications Sector, Challenges: The
Emergence of Next Generation Networks Background Paper, NGN/01, 23 March 2006, p. 14.
[3] International Telecommunication Union, Interconnection in an NGN Environment, Background Paper, NGN/02, 23 March 2006.
[4] International Telecommunication Union, What Rules for Universal Service in an IP enabled NGN Environment? Background Paper,
NGN/03, 23 March 2006.
[5] Telecom Regulatory Authority of India, Consultation Paper on Issues Pertaining to Next Generation Networks (NGN), 12 January
2006, Consultation Paper No: 2/2006.
[6] International Telecommunication Union, NGN Overview, International Conference for Regulators, Dubai, United Arab Emirates, 7
February 2007.
[7] Organization for Economic Cooperation and Development, ―Convergence and Next Generation Networks‖,International Conference
for OECD community, Seoul,Korea, June 2008.
[8] Telecom Regulatory Authority of India, ―Issues pertaining to Next Generation Networks‖, National Conference of Telecom
Regulators, Mumbai,India, January 2011.
[9] Dr Jingming Li Salina, ―Next Generation Networks‖, John Wiley &Sons Ltd.,2008
[10] Tsuguo Kato, ―PSTN, Timeline History‖ by Icon Group International, 2010.


A0440113

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to A0440113 (20)

More from IOSR Journals (20)

A0440113