An Investigation of the Temperature Effect on Solar Panel Efficiency Based on IoT Technology

International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 8 Issue 1, January-February 2024 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD61354 | Volume – 8 | Issue – 1 | Jan-Feb 2024 Page 401
An Investigation of the Temperature Effect on
Solar Panel Efficiency Based on IoT Technology
Mr. Myo Ko Ko1, Dr. Ei Mon2
1
Ph.D. Candidate, Yangon Technological University, Yangon, Myanmar
2
Professor & Research Supervisor, Yangon Technological University, Yangon, Myanmar
ABSTRACT
Sunlight is effectively transformed into electric current using
photovoltaic panels. The rest of the sun's spectrum is linked to
harmful radiation, which increases the temperature of the
photovoltaic panels and consequently decreases performance, power
generation, and efficiency. This paper includes an experimental
investigation to investigate the performance of a polycrystalline solar
PV panel at varying temperatures. Then this study uses Internet of
Things (IoT) technologies to examine how the efficiency of a
polycrystalline solar PV panel performs at various temperatures. The
K-type thermocouple, an Arduino Uno, a Max6675 module, an
ESP8266 (ESP-01) module, the Thing Speak cloud platform, and
voltage divider resistors were the components that constructed the
IoT-based temperature measurement system. The temperature of a
polycrystalline solar panel is determined by experiments, and it may
be used to determine the solar panel's efficiency. The efficiency of
the solar PV panel gradually decreases as the surface temperature of
the panel increases.
KEYWORDS: Investigation, Efficiency, Polycrystalline Solar PV,
Internet of Things (IoT), Temperature
How to cite this paper: Mr. Myo Ko Ko
| Dr. Ei Mon "An Investigation of the
Temperature Effect on Solar Panel
Efficiency Based on IoT Technology"
Published in
International
Journal of Trend in
Scientific Research
and Development
(ijtsrd), ISSN:
2456-6470,
Volume-8 | Issue-1,
February 2024, pp.401-407, URL:
www.ijtsrd.com/papers/ijtsrd61354.pdf
Copyright © 2024 by author (s) and
International Journal of Trend in
Scientific Research and Development
Journal. This is an
Open Access article
distributed under the
terms of the Creative Commons
Attribution License (CC BY 4.0)
(http://creativecommons.org/licenses/by/4.0)
1. INTRODUCTION
The three seasons of Myanmar's tropical climate are
cold winter (November to February), summer season
(March and April), and rainfall (May to October),
which is influenced by the southwest monsoon.
During the dry season, there is typically 7 to 10 hours
of sunshine every day. The weather is more overcast
and there are typically only three to four hours of
sunshine per day during the rainy season. Due to its
location in the southeast of the Asian continent,
Myanmar has year-round high levels of sunshine,
particularly in the Central Myanmar Dry Zone Area.
Myanmar's potential solar energy is approximately
51973.8 Tera Watt-hours per year. Solar energy use is
also just getting started [1].
Due to the need to decrease emissions of greenhouse
gases, sources of clean energy such as solar power
have become more important for electricity
generation. When looking for alternatives to the
current fossil fuels, solar energy has taken the lead.
Solar energy is one of the most promising renewable
resources that is currently being used all over the
world to help achieve growing needs for electric
power. Due to the rise of global warming and extreme
weather conditions, many existing countries are
forced to look for alternative sources in order to
reduce their dependence on fossil-based fuels like
coal, etc. Sunlight is converted into electricity using
solar power, which can be generated directly using
photovoltaics (PV) or indirectly using concentrated
solar energy. Initially, photovoltaics was employed as
a small- and medium-scale application power source.
A remote dwelling is powered by a single solar panel.
The number of solar photovoltaic systems has
reached millions as the price of solar electricity has
decreased. Hundreds of megawatts are produced by
solar power plants. Solar photovoltaic technology,
which uses sustainable solar energy, is getting less
expensive and has a lower carbon footprint [2]. Due
to daily variations in sunlight intensity and solar panel
temperature, solar panels' efficiency varies under
current operating conditions. A number of variables,
including solar irradiation, the surrounding
temperature, the orientation of the panels, and the
installation style, affect the maximum temperature of
IJTSRD61354

International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
solar panels. With the solar panel, the temperature
measurement system plays an important role.
Conventional measurement methods are more labor-
intensive, take longer to complete, cost more to store
real-time data in remote locations, and have weaker
monitoring systems. The Internet of Things (IoT) is
an innovative technological concept that enables the
Internet to connect things from multiple sectors.
2. LITERATURE REVIEW
(Augustine Ozemoya, James Swart, Christo
Pienaar and Ruaan Schoeman, 2013) This study
focuses on analyzing and regulating how the
temperature of the surrounding air affects a solar PV
module's surface temperature, which in turn affects
how much output power is generated. With an
analysis of and eventual control over variables that
affect the solar PV module's surface temperature, this
study aims to maximize the output power of a solar
PV module. The findings demonstrate that the tilt
angle and ambient temperature have a substantial
impact on the solar PV module's surface temperature
[3].
(Uglješa Jovanović †, Dragan Mančić*, Igor
Jovanović* and Zoran Petrušić*, 2017) This study
describes a custom-built system that consists of an
infrared temperature sensor and a microprocessor for
measuring the temperature of solar photovoltaic
modules. The created virtual instrument is used to
process, display, and store the measurement results on
a PC. The proposed strategy delivers reliable readings
and greater flexibility while addressing several
application-related issues with touch sensors. The
proposed approach is particularly well suited to
applications where cost affects the kind of
measurement device that can be used [4].
(Manish Katyarmal, Suyash Walkunde, Arvind
Sakhare, Mrs.U.S.Rawandale, 2018) The project is
built on the implementation of a new, economically
advantageous IoT-based methodology for remotely
monitoring solar plants for performance assessment.
In addition to real-time monitoring, this will make it
easier to perform preventative maintenance and
identify plant faults [5].
3. MATERIALS
The selection of these materials and components was
critical to ensuring the accuracy and reliability of the
data collected during the research. Each component
played a specific role in the experimental setup,
enabling a comprehensive investigation of the
temperature effect on solar panel efficiency.
3.1. Excel Software
Microsoft Excel software was used for data post-
processing and analysis. Data collected from
experiments was imported into Excel for
visualization, calculation of temperature coefficients,
and generation of graphical representations.
3.2. ThingSpeak Cloud platform
ThingSpeak is an IoT cloud platform where users may create applications that they develop as well as transfer
measurement results to the cloud for analysis and visualization using MATLAB or other software. MathWorks is
the company that runs the ThingSpeak service. A MathWorks account must be either newly created or logged
into in order to register for ThingSpeak. The web service (REST API) in ThingSpeak is used to create Internet of
Things products by gathering and storing sensor data in the cloud.
Figure 1. ThingSpeak IoT Platform

3.3. Polycrystalline Solar Panel
Crystalline silicon performs more efficiently than amorphous silicon despite using a lot less material. Not only is
silicon abundant on Earth, but it also has a low contamination rate, a high degree of resilience, and vast expertise
in the microelectronics industry. The two varieties of silicon cells that are most frequently used in manufacturing
are monocrystalline and polycrystalline. Polycrystalline solar panels outperform other panel varieties while
requiring more installation area and a greater working temperature than monocrystalline solar panels.
Polycrystalline solar panels are more economical than monocrystalline ones since they are easier to make and
use more silicon cells. The amount of fossil fuel consumed during production is really small.
Figure 2. 100Watt Polycrystalline Solar Panel
3.4. Arduino Uno
Based on the Microchip ATmega328P microprocessor (MCU), Arduino.cc developed the Arduino Uno
microcontroller board. The board's sets of digital and analog input/output (I/O) pins allow for communication
with a range of expansion boards (shields) and other circuits. The board has 14 digital I/O pins, including six that
can create PWM, and 6 analog I/O pins. It may be programmed using the Arduino IDE (Integrated Development
Environment) [6].
Figure 3. Arduino Uno Board
3.5. K-Type thermocouple
The K-type thermocouple has the broadest operating temperature range. It is composed of a magnetic negative
leg and a nonmagnetic positive leg. K-type thermocouples provide a number of advantages over other
thermocouples, including the ability to perform in a variety of atmospheric and harsh environmental conditions.
They are cost-effective, quick to respond, portable, and trustworthy.
Figure 4. K-Type Thermocouple

3.6. MAX6675 module
A powerful 12-bit analog-to-digital converter (ADC) is included inside the MAX6675 thermocouple-to-digital
converter. In addition, the MAX6675 has a digital controller, an SPI-compatible interface, cold-junction
compensation sensing and correction, as well as related control logic. In thermostatic, process-control, or
monitoring applications, the MAX6675 is intended to cooperate with an external microcontroller or other
intelligence.
Figure 5. MAX6675 module
3.7. ESP8266 module
A Wi-Fi module called the ESP8266 ESP-01 provides microcontrollers access to wireless networks. The
ESP8266 ESP-01 module then processes all the results of the calculation from the Arduino Uno in order to save
them on the Internet of Things (IoT). The IoT platform Thingspeak is used for assessing these results at any
time.
Figure 6. ESP8266 module
4. DESIGN PROCEDURE
A ThingSpeak Cloud platform, a polycrystalline solar panel, an Arduino Uno, a K-type thermocouple, a
MAX6675 module, an ESP8266 module, and two resistors are used in the suggested measuring system
architecture. Microsoft Excel may be used to evaluate data in real-time. In Fig. 6, the system of materials
structure is represented.
Figure 7. Block Diagram of Circuit

For the experiment, a 100-watt polycrystalline solar panel with known specifications was selected. The
efficiency of solar panels is evaluated using this panel as the foundation. The selected solar panel is integrated
with a K-type thermocouple and a MAX6675 module. At a specific place on the panel, the K-type thermocouple
and MAX6675 module gather real-time temperature data. Temperature data is transmitted to the Arduino Uno
for processing. Data is transmitted to the ThingSpeak Cloud platform through the ESP8266 module. The
ThingSpeak Cloud platform allows for data storage and remote monitoring. Using Excel software, data and
patterns are visually represented, making it easier to understand the findings.
Figure 8. IoT based Temperature measurement System
Figure 9. Solar Panel Temperature Measurement System
The method used to examine how temperature affects solar panel efficiency is based on well-known photovoltaic
principles. Multiple effects on crystalline silicon cells due to temperature variations have been noted. In
particular, these cells' efficiency demonstrates a significant decrease with increasing temperatures, similar to the
well-known temperature coefficient phenomenon. Temperature increases have been related to decreases in the
voltage and fill factor of the solar panels, which could have an effect on overall performance and power output.
The efficiency of solar panels ( pv) was calculated using the following formula for evaluating these temperature-
dependent changes:
pv = ηSTC - µpv (Tcell – TSTC)
In this equation, ηSTC represents the reference efficiency of the solar panel under Standard Test Conditions
(STC), µₚᵥ denotes the temperature coefficient of the solar panel, Tcell corresponds to the measured solar panel
temperature, and TSTC signifies the solar panel temperature under Standard Test Conditions. Short-circuit current
(µI,sc), open-circuit voltage (µV ,oc), and maximum power (µmp) were found to have temperature coefficients of
0.06%, -0.38%, and -0.55%, respectively.
Furthermore, an additional equation was introduced to calculate µₚᵥ, the temperature coefficient of voltage:
µpv = ηSTC *
In this equation, µ V,oc denotes the temperature coefficient of the open-circuit voltage, and Vmp(STC) represents the
maximum power voltage at Standard Test Conditions [7].

5. RESULTS AND DISCUSSION
Figure 10. Efficiency and Solar Panel Temperature (Day 1)
The relationship between the surface temperature of a
solar panel and its efficiency is seen in figures 10, 11,
and 12. The solar cells are enclosed in materials like
glass and aluminum, which have low temperatures;
thus, the panel's temperature in the morning is lower
than the surrounding air. Due to the high solar
irradiation at noon, the temperature of the PV module
rises more quickly than the surrounding air

temperature. The cell temperature of 25°C is defined
in the Standard Test Conditions as the reference
condition for module performance. As a result, a
module's performance and energy output will decline
under operating settings where the cell temperature is
higher than 25 °C. Significant findings have been
discovered from the investigation into how
temperature affects solar panel efficiency. As would
be expected, crystalline silicon cells' efficiency
significantly decreases as temperatures increase. This
behavior demonstrates how crucial temperature
regulation is for optimum solar panel performance,
particularly in situations with changing temperatures
found in the real world. Limitations are the main
subject of this investigation of how temperature
affects solar panel effectiveness. The performance of
solar panels can be impacted by a number of
environmental factors, although these factors were
not properly considered in this study. These factors
include humidity, shadowing, and dust buildup. The
interplay of these factors, plus the effects of
temperature, may have an impact on real-world
performance.
6. CONCLUSION
In conclusion, this study highlights the complex
relationship between temperature and solar panel
efficiency. The quantitative approach, supplemented
by temperature coefficients, improves comprehension
of these dynamics, even though efficiency declines as
temperature rises. This knowledge makes it easier to
make well-informed decisions about improving solar
panel performance in real-world environmental
situations where temperature variations are important.
In this study, the effect of temperature on solar panel
efficiency was carefully examined in order to better
understand the complex dynamics influencing the
performance of crystalline silicon cells under various
thermal circumstances. The results of this
investigation provide significant contributions to the
field of renewable energy systems and offer priceless
new insights into how solar panels react to thermal
changes. This research also advances the collective
understanding of the effectiveness of solar panels and
their responsiveness to temperature variations. It
highlights the potential for additional research
projects aimed at improving the effectiveness and
longevity of photovoltaic technology. Additionally, it
highlights the basic necessity of temperature control
in the pursuit of solar energy system optimization.
The conclusions drawn from this study serve as a
basic pillar in the improvement of solar panel
installations' efficiency and sustainability as society
advances in using the potential of renewable energy.
REFERENCES
[1] Thet Thet Han Yee, Su Su Win, and Nyein
Nyein Soe, Solar Energy Potential and
Applications in Myanmar, World Academy of
Science, Engineering and Technology 18 2008.
[2] Yerasu Venkata Naga Govardhan Reddy, S
Ashok Reddy, Arduino Based System To
Measure Solar Power using IOT, Journal of
Engineering Sciences Vol 13 Issue 09,2022,
ISSN:0377-9254.
[3] Augustine Ozemoya, James Swart, Christo
Pienaar and Ruaan Schoeman, Factors
impacting on the surface temperature of a PV
panel, Conference Paper · September 2013,
https://www.researchgate.net/publication/
258148958
[4] Uglješa Jovanović †, Dragan Mančić*, Igor
Jovanović* and Zoran Petrušić*, Temperature
Measurement of Photovoltaic Modules Using
Non-Contact Infrared System, J Electr Eng
Technol.2017; 12(2): 904-910, DOI:
10.5370/JEET.2017.12.2.904.
[5] Manish Katyarmal, Suyash Walkunde, Arvind
Sakhare, Mrs. U. S. Rawandale (2018), Solar
power monitoring system using IoT,
International Research Journal of Engineering
and Technology (IRJET), Volume: 05 Issue: 03
| Mar-2018.
[6] Arduino Community. (8 June 2023). Arduino
Uno. In Wikipedia. Retrieved from
https://en.wikipedia.org/wiki/Arduino_Uno
[7] Abhishek Sharan*‡, B. Prasad*, S. Chandril*,
S. P. Singh*, A. K. Saxena*, Manish Pathak*,
Nishi Chahar**, S. Bhattacharya*,
INTERNATIONAL JOURNAL of
RENEWABLE ENERGY RESEARCH
Abhishek Sharan et al., Vol.3, No. 3, Study of
temperature on performance of c-Si homo
junction and a-Si/ c-Si hetero junction solar
cells.

An Investigation of the Temperature Effect on Solar Panel Efficiency Based on IoT Technology

More Related Content

Similar to An Investigation of the Temperature Effect on Solar Panel Efficiency Based on IoT Technology (20)

More from ijtsrd (20)

Recently uploaded (20)

An Investigation of the Temperature Effect on Solar Panel Efficiency Based on IoT Technology