Analysis of Smart Grid Interoperability

International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 6 Issue 5, July-August 2022 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD50629 | Volume – 6 | Issue – 4 | May-June 2022 Page 1239
Analysis of Smart Grid Interoperability
Makinde Kayode1
, Owolabi Balikis Omowunmi2
, Lawal Olawale Kazeem1
1
Department of Electrical Engineering, Federal Polytechnic Bida, Niger State, Nigeria
2
Electrical and Computer Engineering Kwara State University, Malete, Kwara State, Nigeria
ABSTRACT
The energy grid is currently undergoing a historical change of state
from the traditional structure where a utility owns the generation,
transmission and distribution services into an integrated smart grid in
a monopolistic market which introduce consumers as active players
in managing and controlling the power. This report provides an
analysis of the methods applicable to smart grid interoperability tests.
A systematic approach for developing smart grid interoperability
tests was adopted by analyzing a house and an industries looking at
the analysis of their active power. This analysis of active power gives
the exact idea to know the range of maximum permissible loads that
can be connected to their relevant bus bars. This paper presents the
change in the value of Active Power with varying load angle in
context with small signal analysis using wind, solar and generator
(grid). The result obtained showed that, consumers can then choose
the cheapest energy to be consumed.
KEYWORDS: Smart grids; Smart meter; Photovoltaic systems; Wind
energy, Load schedule, Load curve
How to cite this paper: Makinde
Kayode | Owolabi Balikis Omowunmi |
Lawal Olawale Kazeem "Analysis of
Smart Grid Interoperability" Published
in International
Journal of Trend in
Scientific Research
and Development
(ijtsrd), ISSN: 2456-
6470, Volume-6 |
Issue-5, August
2022, pp.1239-
1245, URL:
www.ijtsrd.com/papers/ijtsrd50629.pdf
Copyright © 2022 by author (s) and
International Journal of Trend in
Scientific Research and Development
Journal. This is an
Open Access article
distributed under the
terms of the Creative Commons
Attribution License (CC BY 4.0)
(http://creativecommons.org/licenses/by/4.0)
INTRODUCTION
Electric energy is essential to increase productivity
and ensure a high quality of life. Therefore, the
relationship between electric power and economic
growth is crucial. However, the consequence of the
current worldwide economic growth and electricity
demand is the depletion of energy resources. The
essential and effective way to prevent the depletion of
resources and promote economic growth at the same
time is the application of the concept of energy
efficiency through energy management systems. This
is being the basic principle of the Smart Grid (Loschi,
H.J., Leon, J., Iano, Y., Filho, E.R., Conte, F.D.,
Lustosa, T.C. and Freitas, P.O., 2015).
The transition from the traditional vertically
integrated hierarchy of the energy companies into this
form of “smart, intelligent grid” or “energy grid with
brain” is no doubt a game change that will not be
possible without the effective participation of the
information and communication technologies to
enable an instantaneous, all time, and safe two-way
passage of information among the linked parties. It
requires a systematic integration of the most
advanced capabilities in the communication, data
sensing and measurement and information technology
to successfully transform the current scene from
hundreds of centralized power sources, which supply
receiving-end consumers with energy flowing in a
one way direction only, into what potentially could be
tens of millions of plug-in electric cars, thousands of
distributed sources, demand response control and
management programs, and other consumer-owned
assets that constitute the concept of a smart grid
(Tawfiq, 2019).
The concept of Smart Grid combines a number of
technologies, customer solutions and addresses
several policy and regulatory drivers. Smart Grid does
not have any single obvious definition. The European
Technology Platform defines the Smart Grid as: A
Smart Grid is an electricity network that can
intelligently integrate the actions of all users
connected to it (figure 1) generators, consumers and
those that do both – in order to efficiently deliver
sustainable, economic and secure electricity supplies
(EARPA, 2022).
Interoperability refers to the ability of two or more
devices from the same vendor, or different vendors, to
IJTSRD50629

International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
exchange information and use that information for
correct cooperation. The ability of two or more
networks, systems, devices, applications, or
components to interwork, to exchange and use
information in order to perform required functions. In
addition, Interoperability between systems in a smart
grid must be considered and well specified in use
cases, in order to develop interoperable Smart Grid
systems by design. Use cases provide a basis for the
specification of functional requirements, non-
functional requirements, test cases and test profiles
(Papaioannou, I., Tarantola, S., Lucas. A., Kotsakis,
E., Marinopoulos, A., Ginocchi, M., Olariaga G. M.,
Masera M. 2018).
Luca, A., Giuseppe, P., Giuseppe, M., and Maurizio,
M., (2013) reviewed Smart Grid Technologies in
Europe. Luca et al, analysed the state-of-the-art of
smart grids, in their technical, management, security,
and optimization aspects. Provision was made for a
brief overview of the regulatory aspects involved in
the development of a smart grid, mainly from the
viewpoint of the European Union.
It is obvious that smart grid technology is the best
when compared to the traditional power sector.
However many countries have not embraced this and
because of this, such countries like Nigeria is having
a lot of challenges with power supply.
Smart grid interoperability technologies has large
initial cost of set up but at long run, it is cheaper,
more convenient at both consumers and the
distributor’s end. There will be what we call check
and balances with less stress or no stress at all. With
this technology generation will be distributed and not
centralized like it use to be, that means flow of
information will be two way. More advantages of
smart grid technology will be detailed in table 1.
Figure 1: Description of Smart Grid
SMART GRID AND THE TRADITIONAL POWER GRID
Table 1 shows the differences between Smart Grid and the traditional power grid (Amuta, E., Wara, S., Agbetuyi
F., and Matthew, S., 2018).
Table 1: Difference between Traditional Power Grid and Smart Grid
S/N Characteristics Traditional Power grid Smart Grid
1 Customer interaction Limited Extensive
2 Metering Mainly electromechanical
Digital (enabling real-time pricing
and net-metering)
3
Restoration following
Disturbance
Manual Self-healing
4 Power flow control Limited Comprehensive, automated
5 Reliability
Prone to failures and cascading
outages; essentially reactive
Automated, pro-active protection;
prevents outages before they start
6
Transmission/Distribution
Line Losses
Above ten percent (10%) loss
of the total power in the
transmission/distribution lines.
About two percent (2%) loss of
the total power in the
Transmission/distribution lines.
7 Flow of information One-way Two-ways

8 Generation of electricity Central Distributed
9
Pollution of the
environment
Very high Low
10
Efficiency of the overall
grid
Poor Excessive
11 Ability to monitor Blind Self- monitoring
12 Topology of the grid Spiral Networked
PROPOSED NETWORK
The major mechanism of a Smart Grid (Figure 2) are electric power generators, electric power substations,
transmission and distribution lines, controllers, smart meters, collector nodes, and distribution and transmission
control centers. Power generators and electric power substations use electronic controllers to control the
generation and the flow of electric power. All of the subsection is explained as follows:
Figure 2: Block diagram of typical smart grid components and connections (Anastasia, 2012).
Alternative power generator
Alternative power generators produce electricity from renewable energy sources. Renewable energy is energy
that is collected from renewable resources which are naturally replenished on a human timescale. Such as: Wind,
Solar, Hydropower and so on.
Smart Controller
The intelligent controller involves the collection of simulation objects operating as controllers using actual
internet communication and running in real time. The intelligence of the controller involves running simulations
of the distributed system or subsystem concurrently with the control of the generation and the flow of electric
power.
Prime power generator
Prime power generators are commonly used as a site’s primary source of continual power which serves as the
source of operation. They can also be used for on-grid applications. It is designed to work long term. Most often,
the prime generator is designed to offer a variable power load that is drawn over time.
Transmission substation
A transmission substation connects two or more transmission lines. The simplest case is where all transmission
lines have the same voltage. In such cases, substation contains high-voltage switches that allow lines to be
connected or isolated for fault clearance or maintenance. This transmission substation can range from simple to
complex.

Distribution substation
A distribution substation transfers power from the transmission system to the distribution system of an area. It is
uneconomical to directly connect electricity consumers to the main transmission network, unless they use large
amounts of power, so the distribution station reduces voltage to a level suitable for local distribution.
Controller
A controller is an individual who has responsibility for all accounting-related activities, including high-level
accounting, managerial accounting, and finance activities, within a company. A financial controller typically
reports to a firm's chief financial officer (CFO), although these two positions may be combined in smaller
businesses.
Smart meter
Smart meter is an advanced energy meter that measures electrical energy consumption and provides additional
information as compared to a conventional energy meter. It aims to improve the reliability, quality and security
of supply. Smart meters allow utilities to determine how much energy you pull from the grid at any point in
time.
Distribution control center
These features include the capability to generate the proper electrical signals and simulate large distribution
systems with diversity of devices, distributed sources and load models among others aspects related with the
functional operation in control centers. Today's power distribution control center manages the day-to-day
operation of distribution network to ensure uninterrupted power supplies to the end customers.
Transmission control center
The transmission control centre is the real heart of every utility's power system operations. Transmission system
control centers serve a critical function in today’s power systems as the nerve center which integrates numerous
automation and control technologies and as the command center from which system operators monitor and
control remote system assets. Typical transmission control centre’s have three main desks – the generation,
transmission and scheduling desk.
Collector
A collector is a device that is primarily used to active solar heating and allow for the heating of water for
personal use. A collector is the center point between the substation and the smart meters.
LOAD ANALYSIS
In order to analyze home and industrial loads, the following table was used: Table 2 showing all the loads
consumed at various time and how the grid switches in automaticallywithout any human intervention on like the
traditional grid. While table 3 showed the industrial load as they were been consumed and how much energy was
needed at each time. The analyzed results are plotted in figure 3 and 4 respectively.
Table 2: House load schedule
Time (hrs) Pgrid (KW) Psolar (KW) Phouse (KW) Pwind (KW)
0 0 0 1 5
1 0 0 1 5
2 0 0 1 5
3 0 0 1 5
4 0 0 1 5
5 0 0 1 5
6 0 0 1 5
7 7 0 1 5
8 7 0 1 5
9 7 0 1 5
10 7 0 1 5
11 7 0 1 5
12 7 0 1 5
13 7 0 1 5
14 7 0 1 5
15 7 0 1 5
16 7 0 1 5

17 7 0 1 5
18 7 0 1 5
19 7 3 6 5
20 7 3 6 5
21 7 3 6 5
22 7 3 6 5
23 7 3 6 5
24 7 3 6 5
Table 3: Industrial load schedule
Time (hrs) Pgrid (KW) Psolar (KW) PIndustry (KW) Pwind (KW)
0 15 0 13 10
1 15 0 13 10
2 15 0 13 10
3 15 0 13 10
4 15 0 13 10
5 15 0 13 10
6 15 0 13 10
7 15 0 13 10
8 15 10 9 10
9 15 10 9 10
10 15 10 7 10
11 15 10 7 10
12 15 10 7 10
13 15 10 7 10
14 15 10 7 10
15 15 10 7 10
16 15 8 6 10
17 15 4 4 10
18 15 4 4 10
19 15 4 4 10
20 15 0 4 10
21 15 0 4 10
22 15 0 4 10
23 15 0 4 10
24 15 0 4 10
Figure 3: The house analysis results

Figure 4: The Industrial analysis results
RESULTS AND DISCUSSION
Here analysis of a house and an industry was looked
into, with the analysis of their active powers. After
the analysis, the following results were obtained.
The house, shown in Figure 3, was powered by two
energies, wind energy of 5KW and the grid. Its load
curve is described by the following program: from
0:00 to 7:00am, the house consumes a constant
electric power of 1KW supplied by the wind turbine.
At 7:00 am, there was a peak of load reaching a value
of 5KW, also supplied by the wind turbine. As a
result, the house remains isolated from the generator
until 7.00 pm where a second peak of 7KW of power
was observed and must last until 23.00. During this
period the grid intervenes to fill the gap.
Unlike the house, the industry has important pools of
production and consumption. The industry, shown in
Figure 4, contains a solar park with a capacity of
10MW and was connected to the grid, so it is
powered by both energy sources. Its load curve is
described by the following distribution: from 00h00
to 6h00 it consumes a constant power of 13MW
provided by the grid. With the arrival of the workers
and the start-up of the machines of the industry, a
peak of 9MW power is observed and only the grid
takes care of it. At 8:00 am where the solar energy
appears and begins to provide energy, both energy are
operational but solar energy cannot satisfy this
demand alone, and the peak will last until 10:00.
Following a reduction in power of 7MW, the grid is
released and only the solar park feeds the plant. A
second peak of 6MW was observed at 15h00 and
continues until 16h00, which again involves the grid.
At 5 pm, with the closure of the industry,
consumption was reduced to 4MW. The latter is
provided by the solar park until 19:00 with the sunset,
the grid was used again until the end of the day.
CONCLUSION
The anticipated model involves both types of solar
and wind energy under normal operating conditions
and this explains the energy swap between consumers
and grid. The cost of electricity was not taken into
reflection, but the different consumers can choose the
cheapest energy. The industry consumes more
between 8am and 3pm as the demand increases and
decreases between 10MW to 13MW and then 9MW
and it was maintained at 7MW. While for the home,
the peak load starts from 7pm till dawn.
REFERENCES
[1] Amuta, E., Wara, S., Agbetuyi F., and
Matthew, S., (2018). Smart Grid Technology
Potentials in Nigeria: an Overview:
International Journal of Applied Engineering
Research ISSN 0973-4562 Volume 13, Number
2 pp. 1191-1200 © Research India Publications.
http://www.ripublication.com.
[2] Anastasia, M., and Mauricio, P. (2012). A
Situational Awareness Architecture for the
Smart Grid: Institute for Information Security,
Computer Science Department, University of
Tulsa, 800 S. Tucker Dr., Tulsa, OK 74104,
USA.
[3] EARPA (2022). Smart Grids European
Technology Platform.
[4] Loschi, H. J., Leon, J., Iano, Y., Filho, E. R.,
Conte, F. D., Lustosa, T. C. and Freitas, P. O.
(2015) Energy Efficiency in Smart Grid: A
Prospective Study on Energy Management
Systems. Smart Grid and Renewable Energy:
6, 250-259.
http://dx.doi.org/10.4236/sgre.2015.68021.

[5] Luca, A., Giuseppe, P., Giuseppe, M., and
Maurizio, M., (2013). Smart Grid
Technologies in Europe: An Overview:
www.mdpi.com/journal/energies: ISSN 1996-
1073.
[6] Papaioannou, I., Tarantola, S., Lucas. A.,
Kotsakis, E., Marinopoulos, A., Ginocchi, M.,
Olariaga G. M., Masera M. (2018). Smart grid
interoperability testing methodology:
Published by Luxembourg, European
Commission, Joint Research Centre,
Westerduinweg 3, 1755 LE Petten, the
Netherlands.
[7] Tawfiq, A. (2019). Analysis of the Smart Grid
as a System of Systems. Publication available
at:https://www.researchgate.net/publication/328
575908.

Analysis of Smart Grid Interoperability

More Related Content

Similar to Analysis of Smart Grid Interoperability (20)

More from ijtsrd (20)

Recently uploaded (20)

Analysis of Smart Grid Interoperability