Architectural design requirements

NBC108V2.RV9 7 December 1993
N E P A L N A T I O N A L B U I L D I N G C O D E
NBC 206 : 2003
ARCHITECTURAL DESIGN REQUIREMENTS
Government of Nepal
Ministry of Physical Planning and Works
Department of Urban Development and Building Construction
Babar Mahal, Kathmandu, NEPAL
Reprinted : 2064

N E P A L N A T I O N A L B U I L D I N G C O D E
NBC 206 : 2003
ARCHITECTURAL DESIGN REQUIREMENTS
tTsflng >L % sf] ;/sf/ -dlGqkl/ifb_ sf] ldlt @)^).$.!@ sf] lg0f{ofg';f/ :jLs[t
Government of Nepal
Ministry of Physical Planning and Works
Department of Urban Development and Building Construction
Babar Mahal, Kathmandu, NEPAL
Reprinted : 2064
This publication represents a standard of good practice and therefore
takes the form of recommendations. Compliance with it does not confer
immunity from relevant legal requirements, including bylaws

TABLE OF CONTENT
Preface ……………………………………………………………………………………. i
1.0 Staicase ……………………………………………………………………………. 1
2.0 Exit ………………………………………………………………………………... 2
2.1 General Exit requirements………………………………………………. 2
2.2 Exit Doors…………………………………………………………………. 3
3.0 Lighting and Ventilation ………………………………………………………... 3
4.0 Lift ………………………………………………………………………………… 3
5.0 Requirement for the Physical Disabled ………………………………………… 4
6.0 Glazing in Hazardous locations ………………………………………………… 4
7.0 Parapet Heights ………………………………………………………………….. 4
References ……………………………………………………………………………….. 5

Preface
This module of Nepal National Building Code covers general building design requirements
in accordance with the principles stated in the Bhawan Ain–2055 (Building Act). The
principal focus is on the safety of occupants in a building during Earthquakes, Fires and
Natural Disasters. Due to the limited technical manpower in the country’s construction
industry, the code has been simplified for the ease of use and implementation. It is hoped that
with the development of manpower and modernization of construction processes, it will be
possible to release a more sophisticated set of building planning guidelines in future.
Principal input to this code came from :
Mr. Purna P. Kadariya, DG, DUDBC
Mr. Kishore Thapa, DDG, DUDBC
Mr. Mani Ratna Tuladhar, Sr. Div. Engineer, DUDBC
Mr. Arun Dev Pant, Architect, SONA
Dr. Sudarshan Raj Tiwari, Institute of Engineering, TU
Mr. Gyanendra Devkota, Architect, SONA
Mr. Rajesh Thapa, Architect, SCAEF
Mr. Bharat Sharma, Architect, Ex. DDG, DUDBC
Mr. Devendra Gangol, President, SONA
Mr. Bibhuti Man Singh, Architect, SCAEF
Mr. Amrit Man Tuladhar, Engineer, DUDBC
i

1.0 Staircase
Every stair having two or more risers shall conform to the following conditions in
addition to Fire Safety requirement set out in NBC 107
1.1 The minimum clear width (unobstructed by projections or handrails) of
staircase shall be as follows:
a) Apartments Shared 1000 mm
(Within each multilevel unit) Internal 800 mm
b) Auditoriums Below 500 capacity 1500 mm
Above 500 capacity 2000 mm
c) Hospitals 2000 mm
d) Cold Storages and Warehouses 1250 mm
e) Buildings more than 4 stories high 1250 mm
(Industrial or Commercial)
Recommended for other types of buildings:
f) Educational 2000 mm
g) Residential 800 mm
h) Cinemas Below 500 capacity 1500 mm
Above 500 capacity 2000 mm
i) Public Assembly 2500 mm
for capacities greater than 2500 occupants
Note: For reduced use staircases such as accesses to lofts, attics and
terraces, the minimum width shall be 600mm.
1.2 The minimum tread shall be 250 mm excluding nosing and the maximum riser
will be 175 mm for all buildings except for internal staircases of Apartments,
which can be permitted up to 190 mm.
1.3 Handrails shall be provided in all open staircases
1.4 Handrails shall not be lower than 900 mm above the centre of the tread.
1.5 The maximum number of risers shall be limited to 15 per flight.
1.6 The minimum headroom under a staircase shall not be less than 2000 mm
measured vertically from the nosing of the tread to the soffit plane above.
1

2.0 Exits
Exits shall be defined as a continuous and unobstructed means of egress to a public
way and shall include intervening doors, passages, lobbies, ramps, staircases, courts
and balconies. An exit may also include a horizontal exit into another building at the
approximately the same level.
2.1 General Exit Requirements
(a) All exits shall be free of obstructions and be properly illuminated
(b) Except in case of apartments, exits shall be arranged so that it shall not
pass through another occupied area.
(c) All exit ways shall be properly illuminated. Illuminated exit signs shall
be required in case of Auditoriums, Hospitals, and Warehouses.
(d) The maximum travel distance on the floor to exits shall not exceed 30 m
for all types of buildings.
(e) Exit capacities shall be calculated as follows:
Number of Occupants per 500mm width
Stairways* Doorways / Passages
Building Type (occupants) (occupants)
Apartments 25 75
Auditoriums 60 90
Hospitals 25 75
Cold Storage and 50 75
Warehouses
Buildings more than 50 75
4 stories high (industrial
and commercial)
Recommended for other types of buildings:
Educational / Institutional 25 75
Other Residential 25 75
Cinemas 60 90
* For stairways, minimum width will be governed by Section 1.0
Example: Calculation of total doorway width at main exit level for a Cinema hall with 900
occupants:
900 occupants / 90 occupants per 500 mm width = 10 x 500 mm = 500 mm total width.
This can be broken up with two main exit doors – Each 2500 mm wide.
2

2.2 Exit Doors
(a) No exit door, inclusive of frame, shall be less than 1000 mm in width and
2000 mm in height except in the case of toilets, which may be permitted to
the width of 750 mm.
(b) Exit doorway of Auditoriums, Cinemas and Public Assembly Buildings
shall be openable without a key from the side which they serve
(c) All exit doors to staircases and public passages shall open outwards.
However, the doors shall not obstruct the passages and staircase landings
when open.
3.0 Lighting and Ventilation
All habitable rooms shall have admission of light through external wall openings not
less than 1/10th
the floor area of the room. Habitable rooms are defined as those areas
not less than 2000 mm x 2000 mm used for extended periods of time for living, study,
sleeping, eating and working excluding bathrooms, stores, laundry, passages and
attics. The admission of light is permitted through internal courtyards having
minimum dimension of 3000 mm x 3000 mm.
No portion of the room shall be considered naturally lighted if it is more than 7500
mm from the opening assumed for lighting that portion.
For natural ventilation, openable exterior openings not less than 1/20th
of the floor
area shall be provided. For ventilating spaces for water closets and bathrooms, the
minimum size of the ventilation shaft shall be 1 sq. m.
Where natural lighting and ventilation requirements are not met, the same shall be
assured through artificial lighting and mechanical ventilation.
4.0 Lifts
Appliances designed for vertical circulation of persons of goods.
4.1 Provision of Lifts shall be made for all buildings more than 15000 mm in
height.
4.2 Not more than 4 lifts shall be provided per bank.
4.3 Shafts for lifts will have to be enclosed by walls having fire resistance of two
hours
4.4 Lift wells that extend for more than two floors shall be ventilated to outside
air through opening of not less than 3.5 % of the area of the shaft. Lift wells
shall not be vented directly through the machine room and provision of
enclosed ventilation ducts or pipes should be provided through the machine
room in such cases.
3

4.5 The electric supply for the lift shall be on a separate supply line from the
supply mains. In case of failure of normal electric supply, it shall
automatically trip over to an alternate power source.
5.0 Requirement for the Physically Disabled
5.1 At least one primary entrance to a building shall be usable by the physically
disabled and be on the level that would provide access to elevators where
provided.
5.2 Access ramps for wheelchairs shall not have gradients in excess of 1:12.
Level platforms shall be provided at max. 1800 mm flight. Level plateforms
shall also be provided at tops and changes of direction. The minimum widths
of wheelchair accessible ramps shall be 900 mm for apartments and
residential uses, and 1000 mm for all other building types. Handrails are
required when the total rise exceeds 600 mm.
5.3 The areas accessible by wheelchair shall have a flush threshold and openings
with minimum clear width of 775mm. If double leaf entrance doors are
provided, the single leaf opening shall meet the above clear width.
6.0 Glazing in Hazardous locations
The following areas are considered specific hazardous locations subject to human
impact:
6.1 Glazing in unframed ingress and egress doors
6.2 Glazing in shower, bathtub doors and enclosures
6.3 Glazing in balustrade railings
The glass for such areas shall be one of the following types*:
a) Single fully tempered glass
b) Laminated fully tempered glass
c) Laminated heat strengthened glass
*For section 6.1, a minimum of 12 mm regular glass may be used instead of the
above special glass.
7.0 Parapet Heights
All accessible roof terraces and balconies shall have parapet walls and handrails that
are not less than 1000 mm in height.
4

References: National Building Code of India 1983
Uniform Building Code, United States 1988
Building Bye –Laws New Delhi
Neufert Architect’s Data, Second International Edition, 1994
5

Architectural design requirements

More Related Content

What's hot (20)

Similar to Architectural design requirements (20)

More from Bharat Khadka (8)

Recently uploaded (20)

Architectural design requirements