Autodesk maya 2016 basic guide

SDCP U B L I C AT I O N S
Kelly L. Murdock
Autodesk Maya 2016
BASICS GUIDE
® ®
www.SDCpublications.com
Better Textbooks. Lower Prices. ACCESS CODE
UNIQUE CODE INSIDE

Visit the following websites to learn more about this book:
Powered by TCPDF (www.tcpdf.org)

1
Chapter 1
Learning the Maya Interface
IN THIS CHAPTER
1.1 Work with menus.
1.2 Use the Status Line buttons.
1.3 Access the Shelf.
1.4 Explore the Channel Box and Layer Editor.
1.5 Identify the animation controls, the Command Line, and the Help Line.
1.6 Use the Toolbox and Quick Layout buttons.
1.7 Discover the Secret menus.

Maya is a program, created by Autodesk, used to model, animate, and render 3D scenes. 3D scenes created with
Maya have appeared in movies, television, advertisements, games, product visualizations, and on the Web. With
Maya, you can create and animate your own 3D scenes and render them as still images or as animation
sequences.
Several versions of Maya exist and the difference between them lies in the features that are included in each.
The commercial version of Maya includes everything you need to create and render 3D scenes and animations.
An advanced version of Maya also includes the Fluid Effects, Cloth, Hair and Fur features. A freely available
version of Maya called the Personal Learning Edition is also available. The Personal Learning Edition is
identical to Maya Complete, except that all renderings include a watermark, making it a great place to start if
you want to learn Maya.
At first glance, the Maya interface can be a little daunting, with buttons, controls, and parameters everywhere,
but if you look closer you’ll realize that all of the controls are grouped into logical sets. Becoming familiar with
these various sets of controls makes the interface much easier to work with.
Along the top edge of the interface are the menus and a toolbar of buttons called the Status Line. The menus
will change depending on the mode that you’re working in. Below the Status Line is a tabbed row of buttons.
This row of buttons is called the Shelf, and it offers a convenient way to group sets of commands together. To
the right of the interface is a panel of parameters called the Channel Box. These parameters, known as
attributes, will change as different objects are selected. Under the Channel Box is the Layer Editor.
Along the bottom of the interface are the Time Slider, the Range Slider, and the animation controls, which are
used to specify and move between the different frames of an animation sequence; also at the bottom are the
Command Line, for entering textual commands, and the Help Line. Finally, the horizontal column of buttons
to the left of the interface is known as the Toolbox and the Quick Layout buttons. These buttons are used to
select and transform scene objects and to change the interface layout.
A key concept that you need to understand as you begin to work with the interface is that there are several ways
to access the same command. For example, you can create a sphere using the Create, Polygon Primitives,
Sphere menu command or by using the Polygon Sphere button in the Polygons shelf. This design is intentional,
allowing beginners an intuitive method for accessing a command, and giving advanced users an access method
that lets them work quicker as they learn the shortcuts.

Chapter 1: Learning the Maya Interface
2
One of the quickest ways to access advanced-user commands is with the Secret menus. These context-specific
pop-up menus appear when you right-click in the interface. Another quick way to access commands is with
keyboard shortcuts, known as hotkeys.
Maya gives users the option to customize the interface. Using the customization features, you can create a
custom set of command icons, define keyboard shortcuts, and even alter menus. Many of the customization
options are included in the Window, Settings/Preferences menu.
Lesson 1.1: Work with Menus
The main menu commands are the first place you should look for commands when you’re new to Maya. The
commands are listed as text, making them easier to find until you learn what the various buttons do. Each menu
can include several submenus. Submenus are identified by a small, right-pointing arrow at the right end of the
menu.
Changing Menu Sets
The menus are dynamic and change depending on the menu set that is selected. You can change between the
menu sets using the drop-down list that is to the very left of the Status Line, as shown in Figure 1-1. The options
include Modeling, Rigging, Animation, FX, Rendering and an option to Customize the menu set drop-down list.
Tip
Each of the menu sets has an associated hotkey. These hotkeys are F2 for
Modeling, F3 for Rigging, F4 for Animation, F5 for FX, and F6 for
Rendering.
The first six menu commands, File, Edit, Modify, Create, Display, and Window, are available in all menu sets.
FIGURE 1-1
Menu set selection list
Viewing Keyboard Hotkeys
Several menu commands have a keyboard hotkey listed to the right of the menu, as shown in Figure 1-2.
Pressing these hotkeys on the keyboard executes the command. Hotkeys provide a quick and easy way to
execute a command, and learning to use them will make you much more efficient. You can customize hotkeys
using the Hotkey Editor, which you open with the Window, Settings/Preferences, Hotkeys menu command.

Autodesk Maya 2016 Basics Guide
3
FIGURE 1-2
Hotkeys and option dialog boxes are displayed in the menus
Accessing Option Dialog Boxes
Several menus also include a small box icon to the right of the menu, also shown in Figure 1-2. These box icons
will open an Options dialog box for the selected command. These Options dialog boxes, such as the Group
Options dialog box shown in Figure 1-3, include parameters that you can change. They also include Apply
buttons that let you apply the command with the given parameters without closing the dialog box. The option
dialog box values are persistent. Any values that are changed will maintain their setting the next time the
command is used. You can reset an options dialog box to its default values using the Edit, Reset Settings menu
command in the dialog box menu.
FIGURE 1-3
Settings dialog box for Create, Polygon Primitives, Sphere

4
Using Tear-Off Menus
At the very top of most menus is a double line called the tear-off menu. Clicking on this line makes the menu a
tear-off menu and displays it as a separate panel, like the one shown in Figure 1-4, that you can move about by
dragging on its title bar. Tear-off menus are convenient because they make the menu commands accessible with
one click, but you need the space to leave the tear-off menu open without covering something else.
Note
In an effort to make the tear-off menu smaller, the keyboard hotkeys
aren’t displayed on a tear-off menu.
FIGURE 1-4
Tear-off menu
Understanding Tools versus Actions
If you peruse the menus, you’ll see many commands that end in the word Tool. Tools, when selected, are active
until another tool is selected, but actions are only executed once. The last tool used is displayed at the bottom of
the Toolbox for easy re-selection. Double-clicking a tool’s button will open the Tool Settings interface on the
right side of the interface, as shown for the Move tool in Figure 1-5. You can also open the Tool Settings using
the Show/Hide Tool Settings button at the right end of the Status Line. Tool settings are also persistent and can
be reset using the Reset Tool button at the top of the Tool Settings interface.

5
FIGURE 1-5
Tool Settings
Lesson 1.1-Tutorial 1: Use a Menu Command to Create a Polygon Sphere
1. Click on the Create menu, and then select the Polygon Primitives submenu and click on the Options
icon to the right of the Sphere menu to open the options dialog box, as shown in Figure 1‐3.
2. In the Polygon Sphere Options dialog box, click the Apply button.
A single sphere objects will appear at the origin in the Workspace.
3. Click the Close button to exit the dialog box.
4. Click on the Create menu, and then select the Polygon Primitives submenu and click on the Cone
menu command. A cone object is added to the scene overlapping the sphere.
5. Press the 5 key to see the objects as shaded objects. The objects resemble a simple crystal ball, as
shown in Figure 1‐6.
6. Select File, Save Scene As and save the file as Crystal ball.mb.

6
FIGURE 1-6
A simple crystal ball created with sphere and cone objects
Lesson 1.2: Use the Status Line Buttons
Directly below the menus are a long row of buttons that are collectively known as the Status Line. These
buttons are constant and cannot be changed, but you can hide them. The buttons are divided into groups that are
separated by a dividing bar. These button groups include, from left to right, the Menu Set list, File buttons, the
Selection Mode menu, Selection Mode buttons, Selection Mask buttons, Snapping buttons, History buttons,
Rendering buttons, the Transform fields, and the Show/Hide Editors buttons, as shown in Figure 1-7. Most of
these button groups are presented and discussed in the lesson that corresponds to their features.

7
FIGURE 1-7
Status Line groups
Using Pop-up Help
When you first begin to use the Status Line buttons, it can be tricky to know which button does what, but you
can view the button’s title as a Pop-up Help by holding the mouse cursor over the top of the button, as shown
in Figure 1-8. Pop-up Help is available for all buttons in the entire interface.
Note
If Pop-up Help starts to get annoying, you can disable it or set its
Display Time using the Help panel in the Preferences dialog box opened
with the Window, Settings/Preferences, Preferences menu command.
FIGURE 1-8
Pop-up Help
Watching for Cursor Clues
Another helpful visual clue is that the cursor changes when it is over any interface button that has an available
right-click pop-up menu. This new cursor displays a small menu icon under the cursor arrow, like the one
shown in Figure 1-9. When this icon appears, you can right-click to access an additional menu of options. The
cursor also changes when certain tools are used.

8
FIGURE 1-9
Cursor indicating a right-click pop-up menu
Expanding and Collapsing Icon Button Groups
Each button group in the Status Line is divided by a vertical line with a small rectangle through its center. This
divider is called the Show/Hide Bar, and if you click on it, and then all buttons included in that section will be
hidden. Click again to make the buttons reappear. Figure 1-10 shows several collapsed and expanded button
sets.
FIGURE 1-10
Expanded and collapsed button sets
Opening and Saving a Scene
To the right of the Menu Set selection list is a set of buttons that you can use to create a new scene, open an
existing scene, or save the current scene. Both the Open and Save buttons will open a file dialog box, as shown
in Figure 1-11, in which you can select the directory and file name. When saved, the file name will appear on
the title bar.
FIGURE 1-11
File dialog box for Windows

9
Opening Editors
At the right side of the Status Line are four Sidebar buttons, shown in Figure 1-12, that don’t belong to a button
group and that are always visible. These Sidebar buttons are used to show and hide one of the sidebar panels
that appear to the right of the view panel including the Attribute Editor, Tool Settings, and Channel Box/Layer
Editor. The Attribute Editor lists all the attributes for the selected object, the Tool Settings will list all the
configurable settings for the selected tool and the Channel Box is a subset of attributes that can be animated,
known as being keyable and the Layer Editor lets you divide the scene objects into layers.
Note
In the Interface panel of the Preferences dialog box, you can select to
have each of the editors open as a separate window instead of the main
window.
FIGURE 1-12
Sidebar buttons
Showing and Hiding Interface Elements
You can also hide any interface element by clicking on the dotted double line at the top (or to the left) of the
interface element, as shown for the Status Line in Figure 1-13. Right-clicking and holding down the mouse
button on the Show/Hide bar presents a pop-up menu of all interface elements. You can make hidden interface
elements visible again using the Display, UI Elements menu. You can use the Display, UI Elements, Hide UI
Elements menu command to hide all UI elements at once.
FIGURE 1-13
Hide interface element bar
Lesson 1.2-Tutorial 1: Open a File
1. Move the mouse over the Status Line buttons at the left end until the Pop‐up Help reads Open a
scene.
2. Click on this button.
A file dialog box appears, similar to the one shown in Figure 1‐11.

10
3. Locate the directory where the Skateboard.mb file is located.
4. Click on the Skateboard.mb file name and click the Open button.
The saved file is then loaded into Maya, as shown in Figure 1‐14.
Note
Before Maya opens a file, it gives you a chance to save the current file.
FIGURE 1-14
Opened skateboard file
Lesson 1.2-Tutorial 2: Save a File
1. Click on the Create menu, and then select the Polygon Primitives submenu and click on the Sphere
menu to add a sphere to the skateboard scene.
2. Move the mouse over the Status Line buttons at the left end until the Pop‐up Help reads Save the
current scene.
3. Click on this button.
This file is automatically saved replacing the existing file. When saved, the file name appears
in the title bar.
Note
You can save the scenes with a new file name using the File, Save As menu
command.

11
Lesson 1.2-Tutorial 3: Maximize the Workspace Interface
1. Right click on the dotted double line on the left end of the Status Line and select Status Line.
The Status Line becomes hidden.
2. Right click dashed double lines for the Shelf, the Channel Box, and the Toolbox and select the other
options on the other interfaces.
3. Right click on the dashed double lines for the controls at the bottom of the interface and select
each.
All interface elements will now be hidden, maximizing the Workspace, as shown in Figure
1‐15.
FIGURE 1-15
A maximized Workspace interface
4. Select the Display, UI Elements, Status Line menu command.
The Status Line interface element reappears.
5. Use the Display, UI Elements, Show UI Elements menu to make the rest of the interface elements
reappear.

Lesson 1.3: Access the Shelf
The Shelf is like a toolbar on steroids. It includes several tabbed panels of buttons. To select a different set of
buttons, just click on one of the tabs and the buttons in its set will appear. Figure 1-16 shows the buttons for the
Polygons tab.

12
FIGURE 1-16
The Shelf
Using the Shelf Menu
At the left end of the Shelf are two menu icons. The top one looks like a mini-tab and you can use it to select a
Shelf tab from a menu. The bottom menu icon is an arrow. You can use it to hide all of the Shelf tabs, open the
Shelf Editor, create and delete shelves, load a custom shelf, and save all shelves. You can save some interface
space by hiding the Shelf tabs. To do this, select Shelf Tabs menu command from the Shelf menu to toggle the
option off.
Creating and Deleting Shelves
The Shelf menu can also be used to create and delete shelves. The New Shelf menu command will open a
simple dialog box, as shown in Figure 1-17, in which you can name the new shelf. The new empty shelf will
then appear at the right end of the tabs. Selecting the Delete Shelf menu command will delete the currently
selected shelf.
FIGURE 1-17
Create New Shelf dialog box
Adding Icons and Menu Commands to a Shelf
You can add buttons from any shelf to another shelf by selecting the button and dragging it with the middle
mouse button onto the tab of the shelf that you wish to add it to. Menu commands can also be added to the
current shelf by clicking on the menu command with the Ctrl/Command and Shift keys held down. You can
delete shelf icons by dragging them with the middle mouse button to the Delete Shelf icon (which looks like a
small trash can) on the right end of the tabs.
Note
Maya uses all three mouse buttons. If you are using a two-button mouse
with a scroll wheel, the scroll wheel acts as the middle mouse button. If
your two-button mouse doesn’t have a scroll wheel, you can use the
Ctrl/Command (command) key and the left mouse button as the middle mouse
button. For a Macintosh one-button mouse, the command key and the mouse
button act as the middle mouse button and the Option key and the mouse
button act as the right mouse button.

13
Adding Layouts and Scripts to a Shelf
You can add custom layouts to a shelf. Just pick the shelf you want to hold the custom layout and then choose
Panels, Panel Editor from the Panel menu. In the Layouts tab, shown in Figure 1-18, select the custom layout
that you want to add to the current shelf and click the Add To Shelf button. You can drag scripts from the Script
Editor with the middle mouse button and drop them into a shelf. Scripts appear on the Shelf as a button labeled
‘MEL’, which stands for Maya Expression Language, Maya’s scripting language.
FIGURE 1-18
Panel Editor
Using the Shelf Editor
The Shelves menu includes an option that will open the Shelf Editor dialog box. Using this editor, shown in
Figure 1-19, you can reorder and rename the tabs and shelves, edit the icons within each shelf, and change the
settings for the shelves.

14
FIGURE 1-19
Shelf Editor
Lesson 1.3-Tutorial 1: Create a New Shelf
1. Click on the Shelf menu and select New Shelf.
The Create New Shelf dialog box appears.
2. Type the name MyShelf for the new shelf and click OK.
A new tab with the typed name appears at the right end of the Shelf.
Lesson 1.3-Tutorial 2: Populate a New Shelf
1. Select the MyShelf tab to make it active.
2. Hold down the Shift and Ctrl/Command keys and select Create, NURBS Primitives, Sphere.
A sphere icon is added to the new shelf.
3. Repeat Step 2 with other primitive objects found in the Create menu.
Each of the selected menu commands appears on the new shelf, as shown in Figure 1‐20.
4. Select the Panel, Panel Editor panel menu command.
The Panel Editor dialog box appears.

15
5. Select the Layout tab and choose the Four View option. Then, click the Add to Shelf button and
then the Close button.
When the Four View option is selected, the view window changes to show four separate
views. After clicking the Add to Shelf button, a new icon appears in the current shelf.
6. Locate the Move tool in the Toolbox and drag the icon with the middle mouse button to the new
shelf.
Dragging an icon with the middle mouse button adds the icon to the current shelf. Figure
1‐20 shows the new shelf.
7. Select Save All Shelves from the Shelf menu.
FIGURE 1-20
A custom shelf of menu commands
Lesson 1.4: Explore the Channel Box and Layer Editor
When an object is selected, its keyable attributes (or channels) appear within the Channel Box, shown in Figure
1-21, to the right of the interface. Each attribute has a value associated with it. These values are often numbers,
but they can be a state like on or off, or a color. You can change these values by selecting the channel’s value,
entering a different value, and pressing the Enter key.
Tip
Use the two double-arrow buttons underneath the Layer Editor to widen or
shrink the Channel Box and the Layer Editor.

16
FIGURE 1-21
The Channel Box
Selecting Attributes
You can select a single attribute by clicking on its title. When selected, the attribute title will be highlighted.
Holding down the Ctrl/Command key while clicking on several attributes will allow you to select multiple
attributes at once; you can also drag the mouse over several attributes to select them.
Using Channel Sliders
You can interactively change attribute values by selecting an attribute in the Channel Box and then dragging
with the middle mouse button in the view panel. Using the buttons at the top of the Channel Box, shown in
Figure 1-22, you can change the channel slider settings to Slow, Medium, or Fast. The higher the setting, the
faster the attribute will change as you drag. You can also select a linear or hyperbolic slider setting. The Linear
setting will cause attribute values to change linearly as you drag with the mouse, but the Hyperbolic setting will
cause the value to change more and more rapidly the longer you drag the mouse.

17
Tip
You can also enter += and a number to add that amount to the current
value. For example, typing +=2 in an attribute field for a Radius value of
5.0 changes it to 7.0. You can also use -=, *= and /= to subtract,
multiply and divide relative values.
FIGURE 1-22
Channel Box settings
Locking Attributes
Locked attributes cannot be changed. You can lock an attribute by selecting it and choosing the Lock Selected
menu command from the Channels menu. Locked attributes will be appear “grayed out,” as shown in Figure 1-
23. Unlock any locked attributes using the Channels, Unlock Selected menu command.
FIGURE 1-23
Locked attributes in the Channel Box
Adding and Deleting Layers
The Layer Editor, shown in Figure 1-24, divides the scene elements up into layers, making them easy to show
and hide. Clicking the Create a New Layer button in the Layer Editor creates a new layer. You can give each
layer a name, display type, and color. Delete layers using the Layers menu. Deleting a layer does not delete its
objects. At the top of the Layer Editor are options for creating Display and Render layers. Render layers are
discussed in Chapter 14.

18
FIGURE 1-24
Layer Editor
Adding Objects to a Layer
You can add selected objects to a layer by right clicking on that layer and selecting Add Selected Objects from
the pop-up menu. You can also use the Layers menu to select all objects in a layer and to remove objects from a
layer. Objects assume the layer color when unselected.
Hiding All Layer Objects
You can hide Layer objects by clicking the first column in the Layer Editor. This column sets the visibility for
the layer objects and is a simple toggle button that you can turn on or off. The letter V appears when the layer
objects are visible and the column is empty when the layer objects are hidden.
Freezing All Layer Objects
The second column can be set to Normal, Template or Reference. The letter T appears in this column when the
layer is a template. Template layers cannot be selected or moved while they are templates. References are proxy
objects that stand in for complex objects. The third column is the layer color. Double-clicking on this column
(or on the layer name) opens the Edit Layer dialog box, shown in Figure 1-25, where you can select a new
color, change the layer’s attributes, or change the layer’s name.

19
FIGURE 1-25
Edit Layer dialog box
Lesson 1.4-Tutorial 1: Change Channel Box Attributes
1. Select File, Open Scene. Locate and open the Rocket.mb file.
This file includes a simple rocket centered about the grid origin. All attributes for the rocket
object are displayed in the Channel Box.
2. Enter a 5 in the Translate X attribute and press the Enter key.
The rocket object is moved five units along the X‐axis.
3. Click on the Translate Y attribute in the Channel Box and drag upward in the Workspace with the
middle mouse button.
The rocket object is moved along the Y‐axis a distance equal to the amount that the mouse
was dragged and the attribute value is changed, as shown in Figure 1‐26.
4. Select File, Save Scene As and save the file as Translated rocket.mb.

20
FIGURE 1-26
Translated rocket
Lesson 1.4-Tutorial 2: Create and Rename a New Layer
1. Click the Create a new layer button in the Layer Editor.
A new layer appears in the Layer Editor.
2. Double‐click on the layer to open the Edit Layer dialog box.
3. Type in a name for the new layer and click the Save button.
Lesson 1.4-Tutorial 3: Add Objects to a New Layer
1. Select Create, Polygon Primitives, Sphere to create a sphere object.
2. Select the Edit, Select All menu command to select all of the objects.
3. In the Layer Editor, right click on the new layer and select Add Selected Objects from the pop‐up
menu.
All objects are added to the new layer.
4. In the Layer Editor, click on the first column in which the V is displayed.
All objects on the layer are hidden.

Lesson 1.5: Identify the Animation Controls, the Command
Line, and the Help Line
At the bottom of the interface are several interface controls that are used to move through the various animation
frames. Below these is a Command Line where you can type in commands to be executed. At the very bottom
of the interface is a Help Line where context-specific information is displayed.

21
Selecting an Animation Frame
All current animation frames are displayed on the Time Slider at the bottom of the interface, as shown in Figure
1-27. You move between the different frames by dragging the black time marker or by entering the frame
number in the field to the right of the Time Slider.
FIGURE 1-27
Time Slider
Setting an Animation Range
Below the Time Slider is the Range Slider, as shown in Figure 1-28. Using this slider, you can focus on a
specific range of animation frames. The Time Slider changes as the Range Slider is moved.
FIGURE 1-28
Range Slider
Playing an Animation
To the right of the animation frame value are several controls for playing, rewinding, and moving through the
animation frames, as shown in Figure 1-29. Using these buttons, you can jump to the animation start (or end),
step back (or forward) one frame, step back (or forward) one key, or play the animation forward (or backward).
FIGURE 1-29
Animation controls

22
Accessing the Animation Preferences
Beneath the Go to End button is a button, shown in Figure 1-30, that will open the Preferences dialog box, as
shown in Figure 1-31. This dialog box includes all of the preferences for Maya, but when it is opened using this
button the Timeline category is selected, allowing you to change the animation preferences.
FIGURE 1-30
Animation Preferences button
FIGURE 1-31
Preferences dialog box
Using the Command Line
In the Command Line, you can enter textual commands to be executed. All commands should end with a
semicolon. The results of these commands are displayed in the dark-colored Results line to the right of the
Command Line. To the right of the Results line is the Show Script Editor button, shown in Figure 1-32, that
opens the Script Editor, where you can enter more detailed scripts. More on the Script Editor is covered in
Chapter 15, “Using MEL Scripting.”

23
Tip
All commands that are entered into the Command Line are saved in a buffer.
Using the Up and Down Arrow keys, you can scroll back and forth through
the existing commands. Pressing the Enter key executes the listed command.
FIGURE 1-32
Script Editor button
Viewing the Help Line
At the very bottom of the interface is the Help Line, as shown in Figure 1-33. Within this line, Maya lists
instructions that it expects to happen next based on the selected tool or mode. If you’re stuck on what to do
next, take a look at the Help Line.
FIGURE 1-33
Help Line
Lesson 1.5-Tutorial 1: Play an Animation
1. Select File, Open Scene and open the Billiard balls.mb file.
This file includes a simple animated scene.
2. Click on the time marker in the Time Slider and drag it to the left.
The objects in the scene will move as the frames are increased. A frame of the animation
sequence is shown in Figure 1‐34.

24
FIGURE 1-34
Animated billiard table
3. Click the Play Forwards button
The entire animation sequence will play over and over.
4. Click the Stop button to pause the animation.
Lesson 1.5-Tutorial 2: Enter a Command
2. Click on the view panel away from the sphere to deselect it.
3. In the Command Line, type, select pSphere1; and press the Enter key.
The sphere object is selected.
4. In the Command Line, type, move ‐z 10;.
The sphere is moved ten units along the z‐axis.
5. Select File, Save Scene As and save the file as Command line sphere.mb.

Lesson 1.6: Use the Toolbox and Quick Layout Buttons
On the left side of the interface is a column of buttons collectively known as the Toolbox, as shown in Figure 1-
35. Below the Toolbox are several layout buttons known collectively as the Quick Layout buttons.

25
FIGURE 1-35
Toolbox
Selecting Objects
The first two buttons in the Toolbox are used to select objects in the scene. These are the Select Objects tool and
the Lasso tool. The Select Object tool lets you select objects by clicking on objects or by dragging a rectangular
border. The Lasso tool lets you drag a freehand outline over the object you want to select.
Holding down the Shift key while clicking on objects with the Select Objects tool will add objects to the
selection set. All selected objects will appear white except for the last object selected, which will appear light
green. This light green object is known as the key object.
Using the Transform Tools
The Toolbox also includes the Move, Rotate, and Scale tools. When any of these tools are selected, a
manipulator will appear at the center (pivot point) of the selected object. With these tools, you can transform the
selected object. Manipulator lets you transform the tool along a single axis or within a single plane, as shown
for the Move tool in Figure 1-36. You can also click on the transform values displayed near the manipulator and
enter new values using the keyboard.
Tip
Once a transform handle on one of the transform tools is selected, it
turns yellow. You can then drag the selected handle using the middle mouse
button.

26
FIGURE 1-36
Universal Manipulator tool
Understanding Manipulators
Each of the transform manipulators has color-coded components that will let you constrain a transform to a
single axis—red is for the X-axis, green is for the Y-axis, and blue is for the Z-axis, as shown in Figure 1-37.
The selected manipulator axis will turn yellow and dragging will transform the object along the selected axis.
FIGURE 1-37
Transform Manipulators
There are many other manipulators besides the transform manipulators. For example, when a spot light object is
selected, you can enable a manipulator that lets you alter its light properties such as its falloff cone, direction
and intensity by dragging in the view. Object manipulators are made active by clicking on the Show
Manipulator button in the Toolbox.
Beneath the Show Manipulator Tool button in the Toolbox is another button that holds the last tool that was
used. Remember that any menu item or button that includes the word Tool in its name will remain active until
another tool is selected and will appear at the bottom of the Toolbox.
Note
The last slot in the Toolbox is reserved for tools selected from the
menus. The Toolbox tools will not occupy this slot.

27
Switching Layouts
Beneath the Toolbox are several buttons, as shown in Figure 1-38, that allow you to quickly change the layout
of the Maya interface. The default layout options include Single Perspective View, Four View,
Perspective/Outliner, Perspective/Graph Editor, Hypershade/Perspective, and Perspective/Hypergraph/Graph.
The arrow button underneath these layout buttons presents a pop-up menu of additional layout options.
FIGURE 1-38
Quick Layout buttons
Customizing Layouts
You can change the layout that each button opens by right-clicking on the layout buttons and selecting the
layout from the pop-up menu. If you right-click on the Model View button at the bottom of the Quick Layout
buttons, you can select the number of panes that are displayed. If multiple panes are selected, the Model View
button will be divided into the number of panes that you selected. Clicking on the Model View button will let
you change the view that is displayed in the view that is clicked on.
Resizing and Editing View Panels
When multiple view panels are visible, you can resize the individual panels by dragging the dividers between
the panels. Only one view panel can be active at a time.
Tip
Using the Spacebar, you can toggle between making the active view panel
fill the entire Workspace and returning to the previous layout. For
example, if the Four View layout is selected and the Top view panel is the
active view panel, pressing the Spacebar maximizes the Top view panel.
You can use the Panels menu command on the Panel menu to change the view for any panel. You can find the
Panels menu at the top of each view panel. The Panels, Saved Layouts, Edit Layouts menu command to open
the Panels dialog box, shown in Figure 1-39. With this dialog box you can create a new panel and edit custom
layouts.

28
FIGURE 1-39
Panels dialog box
Lesson 1.6-Tutorial 1: Select an Object
1. Open the Five spheres.mb file.
This file includes five sphere objects.
2. Click on the Select tool and click on the center sphere.
The sphere in the scene turns light green and its attributes appear in the Channel Box.
3. Hold down the Shift key and click on the other spheres in the scene.
All spheres in the scene are selected and the last sphere clicked on will be light green, as
shown in Figure 1‐40.

29
FIGURE 1-40
Selected objects
Lesson 1.6-Tutorial 2: Transform an Object
1. Open the Five spheres.mb file again.
2. Click on the Select tool and click on the center sphere.
3. Click the Move tool in the Toolbox and drag the green (Y‐axis) upward.
4. The sphere moves upward in the scene.
5. Click the Scale tool in the Toolbox and drag the red (X‐axis) to the right.
6. The sphere is elongated along the X‐axis, as shown in Figure 1‐41.
7. Select File, Save Scene As and save the file as Elongated sphere.mb.

30
FIGURE 1-41
Transformed objects
Lesson 1.6-Tutorial 3: Change the Interface Layout
1. Click on the Show/Hide Channel Box button at the right end of the Status Line.
2. Click on the Four Views button in the Quick Layout buttons.
The layout is changed to show four views, as shown in Figure 1‐42.

31
FIGURE 1-42
Four views
Lesson 1.7: Discover the Secret Menus
Once you get used to the menu commands, you can learn to work faster using the hidden menus. These menus
will pop-up different commands when you right-click on objects in the scene.
Accessing the Marking Menus
For quick access to many common commands, you can open a marking menu by right-clicking in the view
panel and holding the mouse button down until the menu appears. You can then move the cursor between the
different menu options and release the mouse button to select the desired menu command. Figure 1-43 shows
the marking menu for a polygon sphere object.
Tip
You can access a marking menu of selection options by holding down the q
key while clicking in the view panel. You can access other custom marking
menus in a similar manner such as Move Tool options (w), Rotate Tool
options (e), Scale Tool options (r), Polygon Brush options (o), Select All
menu (a), and Menu Sets (h).

32
FIGURE 1-43
Marking menu
Customizing Marking Menus
You can alter the contents of a marking menu, assign a hotkey to a marking menu, or add a marking menu to the
Hotbox using the Marking Menu Settings dialog box, shown in Figure 1-44. You access this dialog box using
the Window, Settings/Preferences, Marking Menus menu command.
FIGURE 1-44
Marking Menus Settings dialog box

33
Using the Hotbox
The Hotbox, shown in Figure 1-45, is a complete set of customizable menus that you can access by pressing and
holding the Spacebar. Using the Hotbox Controls option in the Hotbox, you can select which menu commands
appear in the Hotbox.
FIGURE 1-45
Hotbox
Customizing the Hotbox
If you select the Hotbox Controls option from the Hotbox, you can select which menu sets to include in the
Hotbox. You can also select to Show or Hide all menus.
Lesson 1.7-Tutorial 1: Access a Marking Menu
2. Click on the view panel away from the sphere to deselect it.
3. Right‐click on the sphere and choose Select from the pop‐up marking menu.
The sphere object is selected.
Lesson 1.7-Tutorial 2: Use the Hotbox
1. Move the cursor to the center of the view panel and press and hold the Spacebar.
The Hotbox appears centered around where the cursor is located, as shown in Figure 1‐46.
2. Drag the cursor to the Create button and select the Polygon Primitives, Sphere command.
The sphere object appears in the view panel.
3. Release the Spacebar.

34
FIGURE 1-46
The Hotbox
Chapter Summary
This chapter takes you through a tour of the Maya interface, covering the basic interface elements,
including the menus, the Status Line buttons, the Shelf, the Channel Box, the Layer Editor, the
Animation Controls, the Command Line, the Help Line, the Toolbox, and the Quick Layout buttons.
This chapter also explains how to work with these various interface elements and presents the marking
menus and the Hotbox as other ways to work with the interface.
What You Have Learned
In this chapter, you learned
* How to switch between the different menu sets.
* How to use keyboard hotkeys.
* How to access option dialog boxes from menus.
* How to tear off menus.
* The difference between tools and actions.
* How to use pop‐up help to identify buttons.
* How to identify a change in the cursor denoting right‐click menus.
* How to expand and contract button sets.
* How to open and save scene files.
* How to show and hide the different interface elements.
* How to use the Shelf.
* How to add and delete items from a Shelf.
* How to use parameters in the Channel Box.
* How to use the Layer Editor.
* How to work with the animation controls.
* How to use the Command and Help Lines.
* How to select and transform objects using the Toolbox tools.
* How to add soft modifications to objects with the Soft Modification tool.

35
* How to switch between the different layouts.
* How to use and customize the marking menus and the Hotbox.
Key Terms From This Chapter
* Menu set. A dynamic set of menu options selected from a drop‐down list at the top left of
the interface.
* Hotkey. A keyboard shortcut that executes a command when pressed.
* Option dialog box. A dialog box with additional options opened using the icon found to the
right of specific menu options.
* Tear‐off menu. A panel of menu options that is removed to float freely from the interface.
* Status Line. A set of toolbar icons located at the top of the interface.
* Pop‐up help. A small text title that appears when the cursor is held over the top of an icon.
* Shelf. A customizable set of buttons organized into separate groups.
* Channel Box. A panel of editable parameters that relate to the current selection.
* Layer. A selection of objects grouped together into a set that can be easily selected.
* Animation controls. A set of buttons used to control animation frames.
* Command Line. A text field where you can enter text commands.
* Help Line. A text field that presents the next action that is expected.
* Toolbox. A set of selection and transformation icons located to the left of the interface.
* Quick Layout buttons. A set of buttons for changing the interface layout.
* Universal Manipulator. A manipulator that moves, rotates, and scales objects all at once.
* Soft Modification tool. A tool used to edit local surface areas of the current object.
* Marking menu. A dynamic set of menus accessible by right‐clicking on an object.
* Hotbox. A comprehensive set of menu options accessible by pressing the Spacebar.

Autodesk maya 2016 basic guide

More Related Content

What's hot (20)

Similar to Autodesk maya 2016 basic guide (20)

Recently uploaded (20)

Autodesk maya 2016 basic guide