Cisco UCS: meeting the growing need for bandwidth
1 like754 views
The document summarizes a test report comparing the costs of scaling bandwidth for an 80-node Cisco UCS solution versus an HP BladeSystem c7000 solution. It finds that scaling the Cisco UCS solution from 20 Gbps to 80 Gbps costs 13.4% more than the baseline configuration, while scaling the HP solution to only 40 Gbps costs 46.2% more than baseline and 60 Gbps is not possible. The Cisco UCS solution requires minimal additional hardware and uses a licensing model to scale bandwidth, resulting in lower costs compared to the HP solution which requires purchasing new hardware components at each tier.
Cisco UCS: meeting the growing need for bandwidth
- 1. FEBRUARY 2014 A PRINCIPLED TECHNOLOGIES COST ANALYSIS Commissioned by Cisco Systems, Inc. CISCO UCS: MEETING THE GROWING NEED FOR BANDWIDTH Today’s bandwidth needs are greater than ever, and modern blade servers need to rise to the occasion. In the past, a 1Gbps connection might have supported network traffic with ease, but now even a 10Gbps link can become sluggish when using technologies such as converged networks and bandwidth-heavy virtualization operations such as vMotion and Live Migration. Adequate bandwidth is crucial to the day-to-day operations of many businesses. Companies need to accommodate their current level of activity and be able to scale up as demand increases. In this report, we examine the bandwidth scale-up costs of two 80-node solutions: the Cisco Unified Computing System (UCS®) and the HP BladeSystem c7000. While the baseline Cisco UCS configuration, with 20 Gbps of bandwidth, is slightly less expensive than the baseline HP solution, the true savings come with scaling. Due to differences in the architecture of the two solutions, scaling to an 80 Gbps configuration with the Cisco UCS is 44 percent less expensive than reaching only the 40 Gbps tier on the HP c7000 solution and is 72 percent less expensive than scaling to the 60 Gbps top tier of bandwidth available to the half-height HP solution we tested.
- 2. A Principled Technologies test report 2Cisco UCS: meeting the growing need for bandwidth MORE BANDWIDTH FOR BETTER PERFORMANCE Several bandwidth-intensive new technologies, including vMotion and Live Migration, are increasing the need for network bandwidth. Virtual desktops now allow high-end graphics processing units (GPUs) to send high-resolution, lossless videos and graphics from a server in a data center to multiple client devices over the LAN, but these applications and videos maintain their high quality only with sufficient bandwidth. Bandwidth bottlenecks contribute to degraded quality during the data transfer process, resulting in deteriorated user experience. Newer and faster storage arrays now incorporate solid-state drives (SSDs); this means that the server has greater access to disk I/O via network-attached storage (NAS), but can only benefit from the NAS if the network link supports the transfer of data. Companies must be able to maintain high levels of service, even as bandwidth needs increase over time. To achieve this in a cost- effective way, they need to plan their purchases with an eye to future growth and to understand the costs associated with scaling up. To understand the advantages of the pay-as-you-go approach to increasing bandwidth, we considered a hypothetical business environment requiring 80 compute nodes. The company wants to start with a baseline configuration that provides 20 Gbps of upstream bandwidth to any single node, and intends to increase bandwidth in later configurations. We considered two industry-leading solutions – the Cisco UCS and the HP BladeSystem c7000. We specified an 80-node compute environment with similarly configured blades. Both vendor environments can accommodate 80 nodes while utilizing fully populated chassis. To avoid having to replace parts as we scaled up, we selected hardware we could use in all of the configurations under consideration. This means our initial hardware may support higher bandwidth than we require during that phase, but we will avoid the cost of replacing that hardware with higher-performing components as we scale up.
- 3. A Principled Technologies test report 3Cisco UCS: meeting the growing need for bandwidth Figure 1: Increasing to 80 Gbps on the Cisco solution cost less than increasing to 40 Gbps on the HP solution. As seen in Figure 1, the cost to increase bandwidth with the Cisco UCS environment was significantly lower than with the HP BladeSystem c7000. (Note: At the time of this writing, the HP environment does not offer an 80 Gbps Ethernet solution as an option for their half-height blades.) As seen in Figure 2, in our scenario the Cisco UCS environment has a lower list price than the HP BladeSystem c7000 environment for all configuration tiers. We noted that the list price for the Cisco UCS configuration at 80 Gbps is lower than the HP c7000 environment at 40 and 60 Gbps. As seen in Figure 3, the HP BladeSystem c7000 costs rise in a straight line, due to the additional hardware required to increase bandwidth above the baseline configuration. Each subsequent increase in bandwidth requires the purchase of the full additional hardware to accommodate the need. Compare this with the shape of the cost line associated with the Cisco environment. The Cisco environment requires minimal additional hardware, aside from cabling, and utilizes a licensing model to increase bandwidth on a pay-as-you-go basis. $17,036 $100,410 $141,117 $252,910 $505,820 $0 $100,000 $200,000 $300,000 $400,000 $500,000 $600,000 40 Gbps 60 Gbps 80 Gbps Cisco UCS HP c7000 MSRP cost to increase bandwidth above 20 Gbps Cisco UCS HP c7000 20 Gbps $1,051,136 $1,094,128 40 Gbps $1,068,172 $1,347,038 60 Gbps $1,151,546 $1,599,948 80 Gbps $1,192,253 Figure 2: List prices of Cisco UCS and HP BladeSystem c7000 environments.
- 4. A Principled Technologies test report 4Cisco UCS: meeting the growing need for bandwidth Figure 3: The Cisco UCS model scales up with little additional hardware, creating a gentle cost slope. SCALING UP THE ENVIRONMENT Cisco UCS The Cisco UCS 6248UP Fabric Interconnects deliver up to 160 Gbps to a single chassis. The chassis contains eight half-height bays, and when populated with B200 M3 half-height server blades, can provide up to 80 Gbps of total bandwidth to any node within the chassis. It does this by licensing additional Fabric Interconnect ports, each of which provides 10 Gbps of bandwidth to a server. The chassis require no integrated switches, as switching is handled upstream by the Cisco UCS 6248UP Fabric Interconnect modules. The baseline configuration has 20 Gbps, with 10 Gbps to each of the two virtual adapter ports. This 80-blade scenario required 10 fully populated chassis. List pricing for this configuration as of February 4, 2014 was $1,051,136. You can double the bandwidth, with each of the two virtual NICs providing up to 20 Gbps, simply by increasing the number of uplinks between the chassis FEX (Fabric Extenders) and the Fabric Interconnect and adding port licenses. Implementing this change does not require additional hardware and provides up to 40 Gbps to each blade, increasing the list price by only 1.6 percent over the initial investment for a total of $1,068,172. Increasing the bandwidth to 60 Gbps requires the addition of another virtual interface card (VIC) for each blade, increasing the number of uplinks between the Chassis FEX and the Fabric Interconnects and adding port licenses. These changes increase the cost of the system only 7.8 percent above the list cost of the 40 Gbps option. The list cost for this option is $1,151,546 – a 9.6 percent total increase compared to the base configuration.
- 5. A Principled Technologies test report 5Cisco UCS: meeting the growing need for bandwidth To upgrade from 60 Gbps to the maximum 80 Gbps of bandwidth per server only requires increasing the number of uplinks between the Chassis FEX and the Fabric Interconnects and adding port licenses as necessary. Making this change requires no additional hardware and increases the solution cost by only 3.5 percent over the list price of the 60 Gbps configuration, for a total of $1,192,253. This is a 13.4 percent total increase in list price from the base configuration. For details about the specific configurations and components used for the Cisco UCS environment, see Appendix A. HP BladeSystem c7000 The HP BladeSystem c7000 enclosure contains 16 half-height bays and, when populated with HP ProLiant BL460c Gen8 blades, and may provide up to 60 Gbps of total bandwidth to any node within the chassis. In the base configuration, this bandwidth is provided by leveraging an HP FlexFabric 10Gb 2-port 554FLB adapter, which provides 10 Gbps per port, up to 20 Gbps total, when used in conjunction with HP Virtual Connect FlexFabric 10Gb/24-port modules housed within the chassis. Each Virtual Connect FlexFabric module connects to an upstream switch and provides connectivity for the servers in a single chassis. For the baseline configuration, two Virtual Connect FlexFabric modules per chassis are required in order to provide 20Gbps to the resident blades. Our 80-blade scenario required five fully populated chassis. List price for the baseline configuration as of February 4, 2014 was $1,094,128. Doubling the bandwidth to the blades requires the addition of a mezzanine card in each blade and two additional Virtual Connect FlexFabric modules per chassis. This configuration provides four 10Gbps paths to each blade for a total of 40 Gbps per blade. These additions increase the list price by 23.1 percent over the base configuration, for a total of $1,347,038. Increasing the bandwidth again, to 60 Gbps, requires the addition of another mezzanine card in each blade and the insertion of two more Virtual Connect FlexFabric modules, six total, in each chassis. These additional components add 18.8 percent to the cost of the solution over the previous tier. The list cost for this option is $1,599,948 – a 46.2 percent increase over the list price of the base configuration. As of February 4, 2014, the maximum available bandwidth available to the HP ProLiant BL460c Gen8 blade servers using 10 Gbps Ethernet technology was 60 Gbps. For details about the specific configurations and components used for the HP BladeSystem c7000 environment, see Appendix B.
- 6. A Principled Technologies test report 6Cisco UCS: meeting the growing need for bandwidth PRODUCT ARCHITECTURES Cisco UCS Cisco UCS 6248UP Fabric Interconnect The Cisco UCS 6248UP 48-port Fabric Interconnect provides converged access to both data and storage networks. Fabric Interconnects are typically configured in redundant pairs. Cisco UCS 2208XP Fabric Extenders The Cisco UCS 2200 Series Fabric Extenders extend the I/O fabric, enabling Fibre Channel over Ethernet (FCoE) fabric to connect all blades and chassis together. Managed as an extension of the Fabric Interconnects, Fabric Extenders eliminate the need for redundant switches in each chassis. Each Cisco UCS 2208XP Fabric Extender contains eight 10Gb Ethernet, FCoE- capable, Small Form-Factor Pluggable (SFP+) ports for connecting the blade chassis to the Fabric Interconnect, and thirty-two 10Gb Ethernet ports for connecting half-width bays through the mid-plane. Fabric Extenders, typically configured in pairs for redundancy, can each provide up to 80 Gbps per fabric, for a total of 160 Gbps of I/O to the chassis. Cisco UCS B200 M3 Server The Cisco UCS B200 M3 is a half-width blade providing up to two multi-core Intel® Xeon® E5-2600 v2 processors and 24 DIMM slots supporting up to 768 GB of DDR3 RAM. Up to eight B200 M3 servers can reside in a single Cisco UCS 5108 Blade Server Chassis. The B200 M3 can house two hot-pluggable SAS or SATA hard disk drives (HDDs) or solid-state drives. Cisco UCSB-MLOM Virtual Interface Cards USB-MLOM-40G-01. The Cisco UCSB-MLOM-40G-01 is a four port 10Gb Ethernet, Fibre Channel over Ethernet (FCoE)-capable modular LAN on motherboard (mLOM) card designed for Cisco UCS B-Series Blade Servers. It is capable of providing up to 40 Gbps of bandwidth to a half-height B200 M3 server. UCSB-MLOM-PT-01. The UCSB-MLOM-PT-01 is a port expander for use with the USCB-MLOM-40G-01, which doubles the number of available ports, effectively doubling the total bandwidth available to a single node. Cisco UCS Manager Cisco UCS Manager provides centralized management of the software and hardware components in the Cisco UCS. The UCS Manager controls multiple chassis,
- 7. A Principled Technologies test report 7Cisco UCS: meeting the growing need for bandwidth providing hardware profile management for rapid deployment and management of servers within the UCS environment. Required components for bandwidth increase To increase bandwidth in the Cisco UCS environment, four components come into play. The VIC 1240 port expanders enable the VIC 1240 mLOM to access additional lanes, which is necessary in configurations above 40 Gbps. The UCS 6248UP 16-port expanders add additional ports to the 6248UP Fabric Interconnects, which enables additional lanes for the connected chassis. These expanders come with eight port licenses, which decreases the total number of individual port licenses to be bought separately. The UCS 6200 Series 1PORT license is required for each utilized port on the Fabric Interconnects, either for connection to the chassis or for upstream connections. The additional UCS SFP+ Copper Twinax cables make the connections between the chassis and the Fabric Interconnects. We do not include the prices for uplink connections or upstream port costs. In Figure 4, we show the additional components required for the Cisco UCS environment in order to achieve increased bandwidth. See Appendix A for the list prices of each component. Cisco UCS components required 20 Gbps 40 Gbps 60 Gbps 80 Gbps VIC 1240 port expander 0 0 80 80 UCS 6248UP 16-port expander + 8pL 0 0 2 2 UCS 6200 Series 1PORT license 0 8 32 56 UCS SFP+ Copper Twinax cable 20 40 60 80 Figure 4: Cisco UCS components required to achieve each tier of bandwidth. HP BladeSystem c7000 HP Virtual Connect FlexFabric 10Gb/24-port Module HP Virtual Connect FlexFabric 10Gb/24-port modules provide converged networking capabilities to the HP c7000 chassis. Each module provides configurable connections for either data or storage to each of the connected 10Gb server ports. Two HP Virtual Connect FlexFabric 10Gb/24-port modules are required to provide 20 Gbps to each blade server. HP ProLiant BL460c Gen8 Server The HP ProLiant BL460c Gen8 server is a half-height blade providing up to two multi-core Intel Xeon E5-2600 v2 processors and 16 DIMM slots supporting up to 512 GB of DDR3 RAM. Up to sixteen BL460c Gen8 servers can reside in a single HP BladeSystem c7000 enclosure. The BL460c Gen8 can house two hot-pluggable SAS or SATA hard disk drives (HDDs) or solid-state drives.
- 8. A Principled Technologies test report 8Cisco UCS: meeting the growing need for bandwidth HP FlexFabric Adapters HP FlexFabric 10Gb 2-port 554FLB. The HP FlexFabric 10Gb 2-port 554FLB adapter is a two port flexible LOM adapter capable of providing 10Gb Ethernet, Fibre Channel over Ethernet, iSCSI, or FlexFabric connectivity. Each port of the FlexFabric adapter maps to an interconnect module located on the rear of the HP BladeSystem c7000 chassis. Two FlexFabric modules are required in order to provide 20 Gbps to the HP FlexFabric 10G 2-port 554FLB adapter. HP FlexFabric 10Gb 2-port 554M. The HP FlexFabric 10Gb 2-port 554M adapter is a two port mezzanine adapter capable of providing 10Gb Ethernet, Fibre Channel over Ethernet, iSCSI, or FlexFabric connectivity. Each port of the FlexFabric adapter maps to one interconnect module located on the rear of the HP BladeSystem c7000 chassis. Two additional FlexFabric modules are required in order to provide 20 Gbps to the HP FlexFabric 10Gb 2-port 554M adapter. HP OneView HP OneView is a software platform with an integrated workspace for converged infrastructure management. Tasks and collaboration are automated and streamlined, simplifying the management of both physical and virtual environments. HP OneView offers centralized management for up to 640 servers, allowing you to update and configure the compute nodes in your datacenter. Components required for bandwidth increase The HP BladeSystem c7000 requires only two components in order to increase bandwidth. For each tier of bandwidth, you must install Virtual Connect FlexFabric 10Gb/24-port modules in pairs within each chassis. Additionally, for each tier of bandwidth, you must install an additional mezzanine adapter in each server. This means for each upgrade, you must purchase and install another set of redundant hardware components. Each FlexFabric module connects to an upstream core network; however, we do not include the cost of uplink connections or upstream port costs. In Figure 5, we show the additional components required for the HP BladeSystem c7000 environment in order to achieve increased bandwidth. See Appendix B for list prices of each component. HP BladeSystem components required 20 Gbps 40 Gbps 60 Gbps Virtual Connect FlexFabric 10Gb/24-port Modules 10 20 30 HP FlexFabric 10Gb 2-port 554M Adapters 0 80 160 Figure 5: HP BladeSystem components required to achieve each tier of bandwidth.
- 9. A Principled Technologies test report 9Cisco UCS: meeting the growing need for bandwidth CONCLUSION Entry costs are an important factor in choosing a converged infrastructure environment for your business. Because bandwidth needs are always on the rise, it is also important to choose a solution with easy upgrade paths that will allow you to meet these increasing needs. As our analysis demonstrates, the future costs associated with those upgrades are just as important to consider as the maximum available bandwidth a solution can provide. The Cisco UCS represents a good investment for companies expecting growth in bandwidth over time. Its 20 Gbps baseline configuration is less expensive than the equivalent configuration of the HP BladeSystem c7000. Even better, the cost to scale to its maximum of 80 Gbps is 72 percent lower than the cost of scaling to the HP BladeSystem c7000 maximum configuration of 60 Gbps. This means that the Cisco UCS can deliver more bandwidth at a lower cost than the HP BladeSystem c7000.
- 10. A Principled Technologies test report 10Cisco UCS: meeting the growing need for bandwidth APPENDIX A: CONFIGURATION DETAILS FOR THE CISCO UCS ENVIRONMENT The following tables provide detailed configuration details and cost data for the components in the Cisco UCS solution. We first present the 20Gbps solution, followed by the 40Gbps, 60Gbps, and 80Gbps solutions. All prices are valid as of February 4, 2014 and obtained from buildprice.cisco.com. Cisco UCS Baseline Configuration (20 Gbps) Part Part number Quantity List Total List B200 M3 blade server UCSB-B200-M3-U 80 $1,682.13 $134,570.40 Intel E5-2660 v2 processors UCS-CPU-E5-2660B 160 $2,106.13 $336,980.80 16GB 1866MHz DDR3 RAM UCS-MR-1X162RZ-A 640 $388.80 $248,832.00 146GB 6Gb SAS 15K RPM SFF HDD A03-D146GC2 160 $369.07 $59,051.20 VIC 1240 modular LOM UCSB-MLOM-40G-01 80 $799.47 $63,957.60 VIC 1240 port expander UCSB-MLOM-PT-01 0 $320.00 $0.00 UCS 5108 blade chassis N20-C6508-UPG 10 $3,199.47 $31,994.70 2500W Platinum PSU for UCS 5108 UCSB-PSU-2500ACPL 40 $499.20 $19,968.00 Fan module for UCS 5108 (included with chassis) N/A 0 N/A $0.00 2208XP FEX fabric extender modules UCS-IOM-2208XP 20 $5,333.33 $106,666.60 Cisco R Series rack R42610 2 $1,264.07 $2,528.14 UCS 6248UP Fabric Interconnect + 12pL UCS-FI-6248UP 2 $18,560.01 $37,120.02 UCS 6248UP chassis accessory kit UCS-ACC-6248UP 2 N/A $0.00 UCS 6248UP 16-port expander + 8pL UCS-FI-E16UP 0 $8,533.33 $0.00 UCS 6200 Series 1PORT license UCS-LIC-10GE 0 $1,479.47 $0.00 UCS SFP+ Copper Twinax cable SFP-H10GB-CU5M 20 $260.00 $5,200.00 UCS 6248UP power supply UCS-PSU-6248UP-AC 4 $1,066.67 $4,266.68 UCS 6248UP fan module (included) N/A 0 N/A $0.00 Total cost $1,051,136.14
- 11. A Principled Technologies test report 11Cisco UCS: meeting the growing need for bandwidth Cisco UCS 40 Gbps Part Part number Quantity List Total List B200 M3 blade server UCSB-B200-M3-U 80 $1,682.13 $134,570.40 Intel E5-2660 v2 processors UCS-CPU-E5-2660B 160 $2,106.13 $336,980.80 16GB 1866MHz DDR3 RAM UCS-MR-1X162RZ-A 640 $388.80 $248,832.00 146GB 6Gb SAS 15K RPM SFF HDD A03-D146GC2 160 $369.07 $59,051.20 VIC 1240 modular LOM UCSB-MLOM-40G-01 80 $799.47 $63,957.60 VIC 1240 port expander UCSB-MLOM-PT-01 0 $320.00 $0.00 UCS 5108 blade chassis N20-C6508-UPG 10 $3,199.47 $31,994.70 2500W Platinum PSU for UCS 5108 UCSB-PSU-2500ACPL 40 $499.20 $19,968.00 Fan module for UCS 5108 (included with chassis) N/A 0 N/A $0.00 2208XP FEX fabric extender modules UCS-IOM-2208XP 20 $5,333.33 $106,666.60 Cisco R Series rack R42610 2 $1,264.07 $2,528.14 UCS 6248UP Fabric Interconnect + 12pL UCS-FI-6248UP 2 $18,560.01 $37,120.02 UCS 6248UP chassis accessory kit UCS-ACC-6248UP 2 N/A $0.00 UCS 6248UP 16-port expander + 8pL UCS-FI-E16UP 0 $8,533.33 $0.00 UCS 6200 Series 1PORT license UCS-LIC-10GE 8 $1,479.47 $11,835.76 UCS SFP+ Copper Twinax cable SFP-H10GB-CU5M 40 $260.00 $10,400.00 UCS 6248UP power supply UCS-PSU-6248UP-AC 4 $1,066.67 $4,266.68 UCS 6248UP fan module (included) N/A 0 N/A $0.00 Total cost $1,068,171.90 Cisco UCS 60 Gbps Part Part number Quantity List Total List B200 M3 blade server UCSB-B200-M3-U 80 $1,682.13 $134,570.40 Intel E5-2660 v2 processors UCS-CPU-E5-2660B 160 $2,106.13 $336,980.80 16GB 1866MHz DDR3 RAM UCS-MR-1X162RZ-A 640 $388.80 $248,832.00 146GB 6Gb SAS 15K RPM SFF HDD A03-D146GC2 160 $369.07 $59,051.20 VIC 1240 modular LOM UCSB-MLOM-40G-01 80 $799.47 $63,957.60 VIC 1240 port expander UCSB-MLOM-PT-01 80 $320.00 $25,600.00 UCS 5108 blade chassis N20-C6508-UPG 10 $3,199.47 $31,994.70 2500W Platinum PSU for UCS 5108 UCSB-PSU-2500ACPL 40 $499.20 $19,968.00 Fan module for UCS 5108 (included with chassis) N/A 0 N/A $0.00 2208XP FEX fabric extender modules UCS-IOM-2208XP 20 $5,333.33 $106,666.60 Cisco R Series rack R42610 2 $1,264.07 $2,528.14 UCS 6248UP Fabric Interconnect + 12pL UCS-FI-6248UP 2 $18,560.01 $37,120.02 UCS 6248UP chassis accessory kit UCS-ACC-6248UP 2 N/A $0.00 UCS 6248UP 16-port expander + 8pL UCS-FI-E16UP 2 $8,533.33 $17,066.66 UCS 6200 Series 1PORT license UCS-LIC-10GE 32 $1,479.47 $47,343.04 UCS SFP+ Copper Twinax cable SFP-H10GB-CU5M 60 $260.00 $15,600.00 UCS 6248UP power supply UCS-PSU-6248UP-AC 4 $1,066.67 $4,266.68 UCS 6248UP fan module (included) N/A 0 N/A $0.00 Total cost $1,151,545.84
- 12. A Principled Technologies test report 12Cisco UCS: meeting the growing need for bandwidth Cisco UCS 80 Gbps Part Part number Quantity List Total List B200 M3 blade server UCSB-B200-M3-U 80 $1,682.13 $134,570.40 Intel E5-2660 v2 processors UCS-CPU-E5-2660B 160 $2,106.13 $336,980.80 16GB 1866MHz DDR3 RAM UCS-MR-1X162RZ-A 640 $388.80 $248,832.00 146GB 6Gb SAS 15K RPM SFF HDD A03-D146GC2 160 $369.07 $59,051.20 VIC 1240 modular LOM UCSB-MLOM-40G-01 80 $799.47 $63,957.60 VIC 1240 port expander UCSB-MLOM-PT-01 80 $320.00 $25,600.00 UCS 5108 blade chassis N20-C6508-UPG 10 $3,199.47 $31,994.70 2500W Platinum PSU for UCS 5108 UCSB-PSU-2500ACPL 40 $499.20 $19,968.00 Fan module for UCS 5108 (included with chassis) N/A 0 N/A $0.00 2208XP FEX fabric extender modules UCS-IOM-2208XP 20 $5,333.33 $106,666.60 Cisco R Series rack R42610 2 $1,264.07 $2,528.14 UCS 6248UP Fabric Interconnect + 12pL UCS-FI-6248UP 2 $18,560.01 $37,120.02 UCS 6248UP chassis accessory kit UCS-ACC-6248UP 2 N/A $0.00 UCS 6248UP 16-port expander + 8pL UCS-FI-E16UP 2 $8,533.33 $17,066.66 UCS 6200 Series 1PORT license UCS-LIC-10GE 56 $1,479.47 $82,850.32 UCS SFP+ Copper Twinax cable SFP-H10GB-CU5M 80 $260.00 $20,800.00 UCS 6248UP power supply UCS-PSU-6248UP-AC 4 $1,066.67 $4,266.68 UCS 6248UP fan module (included) N/A 0 N/A $0.00 Total cost $1,192,253.12
- 13. A Principled Technologies test report 13Cisco UCS: meeting the growing need for bandwidth APPENDIX B: CONFIGURATION DETAILS FOR THE HP BLADESYSTEM C7000 ENVIRONMENT The following tables provide detailed configuration details and cost data for the components in the HP BladeSystem c7000 solution. We first present the 20Gbps solution, followed by the 40Gbps and 60Gbps solutions. All list prices are current as of February 4, 2014 and obtained using the HP Product Bulletin. HP BladeSystem c7000 Baseline Configuration (20 Gbps) Part Part number Quantity List Total List HP BL460c Gen8 configurable blade 735151-B21 80 $1,986.00 $158,880.00 Intel Xeon processors E5-2660 718058-L21 160 $1,859.00 $297,440.00 16GB 1600MHz DDR3 RAM 708641-B21 640 $369.00 $236,160.00 146GB 6Gb SAS 15K RPM SFF HDD 652605-B21 160 $355.00 $56,800.00 HP FlexFabric 10Gb 2-port 554FLB adapter 647586-B21 80 $599.00 $47,920.00 HP iLO Advanced Blade 1 server license 3yr 24x7* BD502A 80 $365.00 $29,200.00 HP OneView 3 year 24x7 F6Q91A 80 $400.00 $32,000.00 HP C7000 blade chassis w/one OBA; 2 x PS; 4 x fans 681840-B21 5 $5,999.00 $29,995.00 HP 2400 watt Platinum hot plug power supplies 588603-B21 20 $399.00 $7,980.00 HP BladeSystem c7000 fans 412140-B21 30 $149.00 $4,470.00 HP Onboard Admin w/KVM (redundant) 456204-B21 5 $899.00 $4,495.00 HP Virtual Connect FlexFabric 10Gb/24-port module 00D5823 10 $18,499.00 $184,990.00 HP 642 1075mm Shock Intelligent Series rack BW904A 2 $1,899.00 $3,798.00 HP FlexFabric 10Gb 2-port 554M adapter 647590-B21 0 $849.00 $0.00 Total cost $1,094,128.00 HP BladeSystem c7000 40 Gbps Part Part number Quantity List Total List HP BL460c Gen8 configurable blade 735151-B21 80 $1,986.00 $158,880.00 Intel Xeon processors E5-2660 718058-L21 160 $1,859.00 $297,440.00 16GB 1600MHz DDR3 RAM 708641-B21 640 $369.00 $236,160.00 146GB 6Gb SAS 15K RPM SFF HDD 652605-B21 160 $355.00 $56,800.00 HP FlexFabric 10Gb 2-port 554FLB adapter 647586-B21 80 $599.00 $47,920.00 HP iLO Advanced Blade 1 server license 3yr 24x7* BD502A 80 $365.00 $29,200.00 HP OneView 3 year 24x7 F6Q91A 80 $400.00 $32,000.00 HP C7000 blade chassis w/one OBA; 2 x PS; 4 x fans 681840-B21 5 $5,999.00 $29,995.00 HP 2400 watt Platinum hot plug power supplies 588603-B21 20 $399.00 $7,980.00 HP BladeSystem c7000 fans 412140-B21 30 $149.00 $4,470.00 HP Onboard Admin w/KVM (redundant) 456204-B21 5 $899.00 $4,495.00 HP Virtual Connect FlexFabric 10Gb/24-port module 00D5823 20 $18,499.00 $369,980.00 HP 642 1075mm Shock Intelligent Series rack BW904A 2 $1,899.00 $3,798.00 HP FlexFabric 10Gb 2-port 554M adapter 647590-B21 80 $849.00 $67,920.00 Total cost $1,347,038.00
- 14. A Principled Technologies test report 14Cisco UCS: meeting the growing need for bandwidth HP BladeSystem c7000 60 Gbps Part Part number Quantity List Total List HP BL460c Gen8 configurable blade 735151-B21 80 $1,986.00 $158,880.00 Intel Xeon processors E5-2660 718058-L21 160 $1,859.00 $297,440.00 16GB 1600MHz DDR3 RAM 708641-B21 640 $369.00 $236,160.00 146GB 6Gb SAS 15K RPM SFF HDD 652605-B21 160 $355.00 $56,800.00 HP FlexFabric 10Gb 2-port 554FLB adapter 647586-B21 80 $599.00 $47,920.00 HP iLO Advanced Blade 1 server license 3yr 24x7* BD502A 80 $365.00 $29,200.00 HP OneView 3 year 24x7 F6Q91A 80 $400.00 $32,000.00 HP C7000 blade chassis w/one OBA; 2 x PS; 4 x fans 681840-B21 5 $5,999.00 $29,995.00 HP 2400 watt Platinum hot plug power supplies 588603-B21 20 $399.00 $7,980.00 HP BladeSystem c7000 fans 412140-B21 30 $149.00 $4,470.00 HP Onboard Admin w/KVM (redundant) 456204-B21 5 $899.00 $4,495.00 HP Virtual Connect FlexFabric 10Gb/24-port module 00D5823 30 $18,499.00 $554,970.00 HP 642 1075mm Shock Intelligent Series rack BW904A 2 $1,899.00 $3,798.00 HP FlexFabric 10Gb 2-port 554M adapter 647590-B21 160 $849.00 $135,840.00 Total cost $1,599,948.00
- 15. A Principled Technologies test report 15Cisco UCS: meeting the growing need for bandwidth ABOUT PRINCIPLED TECHNOLOGIES Principled Technologies, Inc. 1007 Slater Road, Suite 300 Durham, NC, 27703 www.principledtechnologies.com We provide industry-leading technology assessment and fact-based marketing services. We bring to every assignment extensive experience with and expertise in all aspects of technology testing and analysis, from researching new technologies, to developing new methodologies, to testing with existing and new tools. When the assessment is complete, we know how to present the results to a broad range of target audiences. We provide our clients with the materials they need, from market-focused data to use in their own collateral to custom sales aids, such as test reports, performance assessments, and white papers. Every document reflects the results of our trusted independent analysis. We provide customized services that focus on our clients’ individual requirements. Whether the technology involves hardware, software, Web sites, or services, we offer the experience, expertise, and tools to help our clients assess how it will fare against its competition, its performance, its market readiness, and its quality and reliability. Our founders, Mark L. Van Name and Bill Catchings, have worked together in technology assessment for over 20 years. As journalists, they published over a thousand articles on a wide array of technology subjects. They created and led the Ziff-Davis Benchmark Operation, which developed such industry-standard benchmarks as Ziff Davis Media’s Winstone and WebBench. They founded and led eTesting Labs, and after the acquisition of that company by Lionbridge Technologies were the head and CTO of VeriTest. Principled Technologies is a registered trademark of Principled Technologies, Inc. All other product names are the trademarks of their respective owners. Disclaimer of Warranties; Limitation of Liability: PRINCIPLED TECHNOLOGIES, INC. HAS MADE REASONABLE EFFORTS TO ENSURE THE ACCURACY AND VALIDITY OF ITS TESTING, HOWEVER, PRINCIPLED TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTY, EXPRESSED OR IMPLIED, RELATING TO THE TEST RESULTS AND ANALYSIS, THEIR ACCURACY, COMPLETENESS OR QUALITY, INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE. ALL PERSONS OR ENTITIES RELYING ON THE RESULTS OF ANY TESTING DO SO AT THEIR OWN RISK, AND AGREE THAT PRINCIPLED TECHNOLOGIES, INC., ITS EMPLOYEES AND ITS SUBCONTRACTORS SHALL HAVE NO LIABILITY WHATSOEVER FROM ANY CLAIM OF LOSS OR DAMAGE ON ACCOUNT OF ANY ALLEGED ERROR OR DEFECT IN ANY TESTING PROCEDURE OR RESULT. IN NO EVENT SHALL PRINCIPLED TECHNOLOGIES, INC. BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH ITS TESTING, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL PRINCIPLED TECHNOLOGIES, INC.’S LIABILITY, INCLUDING FOR DIRECT DAMAGES, EXCEED THE AMOUNTS PAID IN CONNECTION WITH PRINCIPLED TECHNOLOGIES, INC.’S TESTING. CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES ARE AS SET FORTH HEREIN.