เอกสาร แนวทาง การอินติเกรท Mac OS X เข้ากับ ระบบ Active Directory อย่างไร Best Practices How to Integrating Mac OS X with Active Directory Technical White Paper
1 like722 views
The document outlines best practices for integrating Mac OS X with Active Directory (AD), highlighting the benefits of centralized directory services and the ease of integration through Apple's built-in solutions. It provides step-by-step instructions for configuring Mac clients, troubleshooting common issues, and leveraging third-party products for enhanced capabilities. The guidance includes strategies for managed preferences and home directories, ensuring compatibility across mixed network environments.
เอกสาร แนวทาง การอินติเกรท Mac OS X เข้ากับ ระบบ Active Directory อย่างไร Best Practices How to Integrating Mac OS X with Active Directory Technical White Paper
- 1. Best Practices: Integrating Mac OS X with Active Directory Technical White Paper April 2009
- 2. 2White Paper Best Practices: Integrating Mac OS X with Active Directory Contents Page 3 Apple’s Built-In Solution Page 5 How to Integrate Mac OS X with Active Directory Getting Started dsconfigad Testing Troubleshooting Common Problems Passwords Single Sign-On Namespace Support Signed Connections Page 9 Deployment Strategies Managed Preferences Page 10 Home Directories Page 11 Conclusion Page 12 Additional Resources
- 3. 3White Paper Best Practices: Integrating Mac OS X with Active Directory Apple’s Built-In Solution A key component of any modern computing environment, directory services allow organizations to centralize information about users, groups, and computing resources. As a network-based repository, directory services consolidate resources, simplify system management, and reduce support and administration costs. At the same time, directory services benefit users by enabling them to access enterprise resources from anywhere on the network. A directory services infrastructure therefore offers advantages for both administrators and end users. The full benefits of directory services can only be realized when all desktop, notebook, and server systems are integrated into the same infrastructure. This goal has been difficult to achieve in the past due to the proliferation of proprietary directory services solutions. With the introduction of the Active Directory (AD) plug-in in Mac OS X v10.3, Apple made a concerted effort to enable IT administrators to integrate Mac OS X clients and servers easily into existing Active Directory infrastructures. While every Active Directory installation is different (especially within the enterprise space), Mac OS X integrates well with the vast majority of them—and with minimum effort. Whatever combination of Mac, Windows, and Linux systems your organization uses, you no longer need to maintain a separate directory or separate user records to support computers running Mac OS X. Users can move effortlessly between different computers while still adhering to enterprise policies for strong authentication and password-protected access to network resources. When fully integrated, Mac OS X offers a complete managed environment where users can: • Be fully controlled and must abide by the AD password policies • Have single sign-on access to the AD network through Kerberos • Utilize network-based home directories, local home directories, or a combination of the two called Portable Home Directories, which are similar to roaming profiles on Windows Apple’s support for AD also extends to Mac OS X Server. Integrating a server is just as easy as integrating a client system. Integrating AD with Mac OS X Server allows Windows-based departments to take advantage of file sharing and other services in Mac OS X Server, while using their existing AD infrastructure for identification and authentication. Secure network services (including network home directories) hosted on Mac OS X Server also support single sign-on for both Mac OS X and Windows clients.
- 4. 4White Paper Best Practices: Integrating Mac OS X with Active Directory In addition to Apple’s built-in solutions, third-party products from Centrify, Likewise, and other vendors allow managed preferences to be stored in the AD domain without requiring you to extend the schema. The Centrify solution allows you to manage all of the preferences using native AD tools and has support for smart cards. The Likewise Enterprise solution enables you to use Workgroup Manager to specify MCX along with native AD tools. Apple offers additional resources to help with Active Directory deployments, including: • Modifying Active Directory Schema to Support Mac Systems, a white paper providing information on how to create and apply schema modifications in Active Directory • Managing Mac OS X with Workgroup Manager and Active Directory with Extended Schema, a white paper with detailed information on how to manage Mac systems using Workgroup Manager This white paper, Best Practices: Integrating Mac OS X with Active Directory, is designed to help system administrators integrate the Mac into an existing AD infrastructure. Because every AD system is unique, don’t hesitate to contact your Apple representative or Apple Authorized Reseller to talk with you in greater detail regarding Active Directory. Third-party add-on solutions If your deployment requires DFS shares or GPOs, you can choose a third-party product to extend the capabilities of the Apple solution. • Group Logic ExtremeZ-IP. With this Apple Filing Protocol (AFP) server for Windows servers, Mac clients can access files on a Windows server using their native file-sharing protocol, AFP. See www.grouplogic.com. • Centrify DirectControl. This AD plug-in enables Mac OS X to use AD GPOs without requiring any schema modification. See www.centrify.com. • Likewise Enterprise. This AD plug-in enables Mac OS X to use AD GPOs and Workgroup Manager without requiring any schema modification. See www.likewise.com. • Thursby ADmitMac. This directory services AD plug-in and SMB client supports DFS shares. See www.thursby.com. • Objective Development Sharity. This SMB client supports DFS shares. See www.obdev.at/products/sharity.
- 5. 5White Paper Best Practices: Integrating Mac OS X with Active Directory How to Integrate Mac OS X with Active Directory Getting Started Using these simple steps, you can configure a Mac client to use DNS and AD to determine the geometry of your AD domain, find the nearest domain controller, and create a new computer account in the domain—if there isn’t an existing one with the computer ID that you have chosen. On the Mac client, open the Directory Utility (or Directory Access in Mac OS X 10.4 Tiger or earlier) application in the Utilities folder: /Applications/Utilities. If it’s not already unlocked, click the lock at the bottom left of the window, and authenticate as a local admin. Choose Active Directory and click Configure. Leave the advanced options alone for now and enter the name of your Active Directory domain. The computer’s account in AD will reflect the Computer ID in this window—make sure it reads correctly before proceeding. Click Bind. Enter the user name and password of a user who has permission to bind clients to the Computer OU that you specify. This does not need to be an “admin” user—you may assign the privilege to any user. Click OK. dsconfigad The functionality of the Directory Access graphical user interface (GUI) is also accessi- ble from the CLI with the dsconfigad command. For example, the following command would bind a system to AD: dsconfigad -f -a COMPUTERNAME -forest example.com -domain example.com -u administrator -p ‘password’ Once you’ve bound a system to the domain, you can use dsconfigad to set the administrative options that are available in Directory Access: dsconfigad -preferred ads01.example.com -multidomain disable -groups domain admins@example.com, enterprise admins@example.com When using dsconfigad in a script, you must include the cleartext password that was used to bind to the domain. Typically, an AD user with no other admin privileges is delegated the responsibility of binding clients to the domain. This user name and password pair is stored in the script. Computer accounts Each Mac system has a unique computer account in Active Directory. If you clone a system or integrate NetBoot with AD, all of the cloned systems are assigned the same computer account. This means that it’s impor- tant to take care when changing a computer account, as any change will break authentica- tion from all systems using that account.
- 6. 6White Paper Best Practices: Integrating Mac OS X with Active Directory Once dsconfigad has been used to bind the client to the AD domain, use the dscl command to add AD to the local system’s authentication and contacts: dscl /Search -create / SearchPolicy CSPSearchPath dscl /Search/Contacts -create / SearchPolicy CSPSearchPath dscl /Search -append / CSPSearchPath /Active Directory/ All Domains dscl /Search/Contacts -append / CSPSearchPath /Active Directory/All Domains Testing You can quickly test for a successful bind from the command line. Use the id command to check that the system can use AD to identify users and groups in the domain. The id command returns only the first 16 groups of which the user is a member, even though the client system is aware of all groups: id <AD user shortname> Next, test authentication using the su command to switch to an AD user: su <AD user shortname> You can also use dscl, the DirectoryService command-line tool, to check that the client can iterate the users in the domain. In a layout similar to a file system, dscl presents all directory services information of which the system is aware. Troubleshooting Start by enabling directory services debug logging: sudo killall -USR1 DirectoryService Now when you attempt to bind, you can look at the log to see what is occurring: /Library/Logs/DirectoryService/DirectoryService.debug.log When you have accomplished a successful bind, use the same command to disable the debug logging: sudo killall -USR1 DirectoryService For more verbose API-level debugging, you can use a –USR2 command, although typically this is not necessary. To conserve disk space, a –USR2 DirectoryService command stops executing after five minutes. In some cases, you will need to have directory services debugging enabled at login. To do this, create an empty file that will enable debug logging at boot: /Library/Preferences/DirectoryService/.DSLogDebugAtStart. It may also be helpful to examine a packet trace of the client attempting to bind to the domain. Try capturing traffic for the following ports: UDP 53 - DNS TCP 88 - Kerberos TCP 389 - LDAP TCP/UDP 464 - Kerberos Password Changes (KPasswd) TCP 3268 - Global Catalog (LDAP)
- 7. 7White Paper Best Practices: Integrating Mac OS X with Active Directory For example, to capture traffic over the built-in Ethernet connection to a file called “capture.out,” you could use the following syntax for tcpdump: tcpdump –K -i en0 -s 0 -w capture.out port 88 or port 464 or port 53 or port 389 or port 3268 Common Problems DNS service Since AD relies on DNS SRV service records, the Mac client must be using the same DNS servers as all of the Windows clients on the network. Use the dig command to test that the Mac can read the proper DNS records. In the following example, replace example.com with the DNS of your AD domain: dig -t SRV _ldap._tcp.example.com This should return the IP address of your domain controller. If it doesn’t, your Mac systems are not using the same server for DNS as the AD clients, or your DNS server is misconfigured. Beginning with Mac OS X v10.5 Leopard, the Mac OS X client will attempt to dynami- cally update DNS records hosted by Active Directory. .local domains Since Mac OS X uses the .local domain for Bonjour (link-local addressing), it will conflict with any .local AD domain. To get around this, add .local to the search domain settings in the Network preference pane. All .local DNS queries will be unicast to the DNS servers before being multicast to the network. Beginning with Mac OS X v10.5.4, the Mac OS X client recognizes .local domains, and the addition of .local into the search domain settings is not necessary. Replication In versions earlier than Mac OS X v10.5, when binding a Mac to a large AD domain, the computer account may be created on one domain controller while the Mac attempts to set the computer account’s password on another. If the replication interval between the two systems is not quick enough, the password set request will fail, and the Mac will not be bound to the domain. To address this problem, make sure that the sites are correctly set up and that the domain controllers within the sites are properly replicating to one another. Another alternative is to create the computer account in AD before binding the Mac. When the Mac binds, the Directory Access application will ask if you’d like to use the existing computer account. This eliminates the chance of a replication error during the bind process, since replication has already occurred. This situation has been addressed in Mac OS X v10.5—the client will ensure that the same server is used for both Kerberos and LDAP connections. Passwords Since Mac OS X leverages Kerberos, it inherently supports AD password policies and enforces restrictions on the length and complexity of passwords on client systems. Mac users can also change their passwords using the Accounts preference pane in Mac OS X. In the days leading up to password expiration, users are notified during login and other authentication events that their password is about to expire. This gives them the opportunity to change their password in AD—which will reset the expiration timer— Site awareness Apple’s AD plug-in is AD site aware. It queries the global catalog for site information and polls the site’s domain controllers. From those that respond, the plug-in chooses two and uses them until a network change occurs or until one of the domain controllers stops responding. Similar to a Windows system, the Apple plug- in creates a computer account in AD during the bind process. However, the Mac continues to use this account for all user lookups— unlike a Windows system, which switches to using the user credentials once someone has logged in.
- 8. 8White Paper Best Practices: Integrating Mac OS X with Active Directory using the Accounts preference pane on the Mac client. When the password is within 24 hours of expiration, users cannot complete login until they have changed their password. Beginning with Mac OS X v10.5, the computer account password is cycled. The default is every 14 days, but you can use the dsconfigad command-line tool to set any interval that your site’s policy requires. Single Sign-On Microsoft and Apple both support MIT’s Kerberos to provide a secure single sign-on environment. When configured to participate in the AD domain, a Mac uses Kerberos exclusively for all authentication activities. If desired, the use of NTLMv1 and NTLMv2 can be prohibited on the network with no impact on Apple-provided services inte- grated with Active Directory. When an AD user logs in to a Mac, the AD domain controller automatically issues a Kerberos TGT. When the user attempts to use any service on the domain that supports Kerberos authentication, the TGT generates a ticket for that service, without requiring the user to authenticate again. You can use the normal Kerberos administration tools to view tickets currently issued to a user. For example, klist from the command line shows the current tickets, and the Kerberos utility, /System/Library/CoreServices/Kerberos.app, displays the same information through a graphical interface. Namespace Support Mac OS X v10.5 now offers the option of supporting multiple users with the same shortnames that exist in different domains within the AD forest. By enabling namespace support, using the dsconfigad command line tool, users will have to log in using their domain followed by their shortname (DOMAINshortname), similar to logging in to a Windows system. Signed Connections The AD plug-in has the ability to both sign and encrypt the LDAP connections that are used to communicate with Active Directory. Along with the signed SMB support that is present in Mac OS X v10.5, you should not have to downgrade your site’s security policy to accommodate any Mac clients. Additionally, the signed and encrypted LDAP connections eliminate the need to use LDAP over SSL. Windows Server 2003 R2 The AD plug-in has been successfully tested with Windows Server 2003 R2. The domain can be in either native or mixed mode with- out any change in the functionality of the Mac OS X clients.
- 9. 9White Paper Best Practices: Integrating Mac OS X with Active Directory Managed Preferences When fully integrated, Mac OS X offers a complete managed environment where users can be fully controlled and required to abide by AD password policies. Depending on the level of management your organization requires, there are several options for managing Mac client preferences. Do nothing. Apple’s plug-in automatically enables authentication to AD, including full support of password policies. It also allows you to set up network homes for Mac users on AD. Extend the AD schema to handle management. By adding 36 attributes and 10 classes to the AD schema, your AD system can support all Mac OS X management policies. Just use the normal Mac OS X management tools and target the AD domain. Use a dual directory. Sometimes known as the “magic triangle,” this scenario adds Mac OS X Server to the solution. Mac clients integrate with AD and with an Open Directory domain on Mac OS X Server. AD users and groups are nested inside Open Directory groups. Mac OS X v10.5 further enhances this scenario with “augmented records” that allow information from a secondary directory to be added to information directly from AD for the same record. This solution does not require any change to the AD schema, but it does require Mac OS X Server. Deployment Strategies Managed Client for Mac OS X (MCX) Because Windows and Mac OS X handle preferences differently, a Mac is unable to use GPOs in AD. Instead, Apple has a system called MCX that accomplishes the same task. MCX can be stored locally on Mac clients that have been integrated into AD, but this makes updates difficult because it involves each individual computer. It’s also possible to host the MCX objects in AD, which requires you to extend the schema. Another solution is to configure a secondary LDAP directory using Mac OS X Server and Apple’s Open Directory. In this scenario, clients still use AD for user authentication, while Open Directory supplies managed preferences only.
- 10. 10White Paper Best Practices: Integrating Mac OS X with Active Directory Home Directories Regardless of your strategy for managed preferences, you can set up users with local homes, network homes, or a combination of the two called Portable Home Directories, which are similar to roaming profiles on Windows. Local (do nothing). With the default configuration of Apple’s AD plug-in, the user’s home stays on the local system, without any change to the user record in AD. If a net- work home is defined in the user record, that share will mount on the desktop when the user logs in. Network. To define a network home in the Mac user’s AD record, use a URL in the form of servershareuser—just as you would for a Windows user. When interpreted by the AD plug-in on the Mac, the server name will be added to the AD domain, forming a URL: smb://server.ad.domain/share/user. Note: If the user’s domain is different from the domain of the user’s home folder, it may be necessary to put the fully qualified name of the server in the URL. So, instead of //server/share/user, you would use //server.userad.domain/share/home. Using a Mac friendly naming convention does not affect the Windows systems on the network. The Mac user’s network home can be hosted on either Mac OS X Server or on a Windows server, using either AFP or SMB. You can even host home directories for both Mac OS X and Windows clients on Mac OS X Server, providing Mac services over AFP and Windows services over SMB. Portable Home Directory. In this scenario, the AD user record and the network home are cached locally on the client system, making it ideal for managing laptop users when they are away from the network. According to a sync policy, the local system synchronizes with the remote home folder. For laptops, this typically happens when they reconnect to the network. Portable Home Directories can also be useful for man- aging desktop users. You decide how often the client syncs and what files are included in the sync—and allow them to operate offline the rest of the time. AFP network homes It’s also possible to use an afp:// URL for your homes. In AD, the URL remains in the standard Universal Naming Convention (UNC). On the Mac side, however, you can allow the client to translate the SMB path into an AFP path.
- 11. 11White Paper Best Practices: Integrating Mac OS X with Active Directory Conclusion Apple’s support for Active Directory within Mac OS X enables Mac clients and servers to integrate smoothly into existing AD environments, and provides the option of deploying a single directory services infrastructure that can support both Windows and Mac clients. If you have any questions about the best practices discussed in this paper, or any other aspect of integrating Mac OS X systems with Active Directory, please contact your Apple representative or Apple Authorized Reseller for assistance.
- 12. 12White Paper Best Practices: Integrating Mac OS X with Active Directory Additional Resources For more information about integrating Mac OS X clients into AD environments— including documentation, training, articles, scripts, and discussions—visit the following sites: www.apple.com/business/solutions/it/directory.html www.apple.com/server/resources www.apple.com/training You can also reference the following papers for more information: • Modifying Active Directory Schema to Support Mac Systems, a white paper providing information on how to create and apply schema modifications in Active Directory • Managing Mac OS X with Workgroup Manager and Active Directory using Extended Schema, a white paper with detailed information on how to manage Mac systems using Workgroup Manager For More Information For more information, please contact your Apple representative or Apple Authorized Reseller. © 2009 Apple Inc. All rights reserved. Apple, the Apple logo, Bonjour, Mac, Mac OS, Tiger, and Leopard are trademarks of Apple Inc., registered in the U.S. and other countries. Other product and company names mentioned herein may be trademarks of their respective companies. April 2009 L334436B