Bio Chip Project Report

A MID-TERM SEMINAR REPORT ON

BIOCHIP

SUBMITTED IN PARTIAL FULFILLMENT FOR THE
DEGREE OF BACHELOR OF TECHNOLOGY IN
(COMPUTER SCIENCE & TECHNOLOGY)

BY
ISHA .D. SHENDE
LAXMI KEWAT

UNDER THE GUIDANCE OF
Mr. NARENDRA GAWAI

USHA MITTAL INSTITUTE OF TECHNOLOGY
S.N.D.T. WOMEN'S UNIVERSITY
MUMBAI-40049
2008-2009

CERTIFICATE

This is to certify that Ms.Isha D Shende & Ms.Laxmi kewat has succesfully completed midterm
seminar worj on “BIOCHIP” in partial fulfilment for the bachelor's degree in Computer Science
& Technology during the year 2009-2010 as prescribed by SNDT Women's University.

GUIDE HEAD OF DEPARTMENT

(Mr. Narendra Gawai) (Mr.Sumedh Pundkar)

PRINCIPAL
(Mrs.Kumud Wasnik)

TABLE OF CONTENTS

Sr.No. Chapter Name Page No.

1. Introduction
1.1 What is a “Biochip”
1.2 Generations
2. What does Biochip do
3 Biochip Architecture
3.1 Size
3.2 Components
3.3 Cost
4. Applications of Biochip
4.1Genomics
4.2Proteomics
4.3Cellomics
4.4Biodiagnostics and (Nano) Biosensors
4.5Protein Chips for Diagnosis and Analysis of Diseases
5. Human interface of Biochip
6. Advantages & Disadvantages
7. Developments & projects
8. Conclusion
9. References

LIST OF FIGURES

FIGURE NO. FIGURE NAME PAGE NO

1.1 Biochip 01
3.1 Actual size of chip 04
3.2 Components of Biochip 05
5.1 Human interfacing of Biochip 09
5.2 Syringe to implant Biochip 10

ABSTRACT

A biochip is a collection of miniaturized test sites (microarrays) arranged on a solid substrate that
permits many tests to be performed at the same time in order to achieve higher throughput and
speed.Like a computer chip that can perform millions of mathematical operations in one second, a
biochip can perform thousands of biological reactions, such as decoding genes, in a few
seconds.Biochips helped to dramatically accelerate the identification of the estimated 80,000 genes
in human DNA, an ongoing world-wide research collaboration known as the Human genome
project.Developing a biochip plat-form incorporates electronics for addressing, reading out,
sensing and controlling temperature and, in addition, a handheld analyzer capable of multiparameter
identification. The biochip platform can be plugged in a peripheric standard bus of the analyzer
device or communicate through a wireless channel. Biochip technology has emerged from the
fusion of biotechnology and micro/nanofabrication technology. Biochips enable us to realize
revolutionary new bioanalysis systems that can directly manipulate and analyze the micro/nano-
scale world of biomolecules, organelles and cells.

CHAPTER 1
1.INTRODUCTION

1.1 What is a biochip?
A biochip is a collection of miniaturized test sites (microarrays) arranged on a solid substrate
that permits many tests to be performed at the same time in order to achieve higher
throughput and speed. Typically, a biochip's surface area is no larger than a fingernail. Like a
computer chip that can perform millions of mathematical operations in one second, a biochip
can perform thousands of biological reactions, such as decoding genes, in a few
seconds.Biochip is a broad term indicating the use of microchip technology in molecular
biology and can be defined as arrays of selected biomolecules immobilized on a surface.
Biochip will also be used in animal and plant breeding, and in the monitoring of foods
andthe environment.Biochip is a small-scale device, analogous to an integrated circuit,
constructed of or used to analyze organic molecules associated with living organisms. One
type of theoretical biochip is a small device constructed of large organic molecules, such as
proteins, and capable of performing the functions (data storage, processing) of an electronic
computer. The other type of biochip is a small device capable of performing rapid, small-
scale biochemical reactions for the purpose of identifying gene sequences, environmental
pollutants, airborne toxins, or other biochemical constituents.

Fig 1.1Biochip

Biochip/Introduction 1

1.2Generation/History

The development of biochips has a long history, starting with early work on the underlying sensor
technology.Biochip was originally developed in in 1983 for monitoring fisheries,the rapid
technological advances of the biochemistry and semiconductor fields in the 1980s led to the large
scale development of biochips in the 1990s. At this time, it became clear that biochips were largely
a "platform" technology which consisted of several separate, yet integrated components. Today, a
large variety of biochip technologies are either in development or being commercialized. Numerous
advancements continue to be made in sensing research that enable new platforms to be developed
for new applications. Biochip was invented in 4G generation & the development is still continued,
due its various applications. Biochips are also continuing to evolve as a collection of assays that
provide a technology platform. One interesting development in this regard is the recent effort to
couple so-called representational difference analysis (RDA) with high-throughput DNA array
analysis. The RDA technology allows the comparison of cDNA from two separate tissue samples
simultaneously.It is important to realize that a biochip is not a single product, but rather a family of
products that form a technology platform. Many developments over the past two decades have
contributed to its evolution.In a sense, the very concept of a biochip was made possible by the work
of Fred Sanger and Walter Gilbert, who were awarded a Nobel Prize in 1980 for their pioneering
DNA sequencing approach that is widely used today. DNA sequencing chemistry in combination
with electric current, as well as micropore agarose gels, laid the foundation for considering
miniaturizing molecular assays. Another Nobel-prize winning discovery, Kary Mullis's polymerase
chain reaction (PCR), first described in 1983, continued down this road by allowing researchers to
amplify minute amounts of DNA to quantities where it could be detected by standard laboratory
methods. A further refinement was provided by Leroy Hood's 1986 method for fluorescence-based
DNA sequencing, which facilitated the automation of reading DNA sequence.
Further developments, such as sequencing by hybridization, gene marker identification, and
expressed sequence tags, provided the critical technological mass to prompt corporate efforts to
develop miniaturized and automated versions of DNA sequencing and analysis to increase
throughput and decrease costs. In the early and mid-1990s, companies such as Hyseq and
Affymetrix were formed to develop DNA array technologies.

Biochip/Introduction 2

Chapter2
How does a biochip work?

The "chip contains a 10 character alphanumeric identification code that is never duplicated.
when a scanner is passed over the chip, the scanner emits a 'beep' and your ... number flashes in the
scanner's digital display." Biochips concentrate thousands of different genetic tests on a surface area
of just a few square centimetres so that they can be analysed by computer within a very short space
of time. On the one hand this makes the individual genetic tests much cheaper and on the other
hand, thanks to the capacity, many more tests can be carried out.
Biochips concentrate thousands of different genetic tests on a surface area of just afew
square centimetres so that they can be analysed by computer within a very shortspace of time. On
the one hand this makes the individual genetic tests much cheaperand on the other hand, many
more tests can be carried out.Affymetrix invented the “high-density microarray” in 1989 and has
been selling thisassay since 1994 under the name of GeneChip® (figure 1). In this
context,microarray means that the genetic tests are organised (arrayed)
inmicrometrespacing(micro).As it was not previously possible to go below the millimetre range,the
description “high density” is certainly justified. Experiments (e.g. measurement ofgene activity or
sequencing to demonstrate mutations and polymorphisms) that couldpreviously only be done
individually, one after the other, can now be carried out inlarge numbers at the same time and in a
highly automated manner.

Biochip/What does Biochip do 3

Chapter 3

Biochip Architecture

The biochip implant system consists of two components; a transponder and a reader or scanner. The
transponder is the actual biochip implant. The biochip system is a radio frequency identification
(RFID) system, using low-frequency radio signals to communicate between the biochip and reader.
The reading range or activation range, between reader and biochip is small, normally between 2 and
12 inches.

3.1Size
The size of Biochip is of a size of an uncooked rice grain size. It ranges from 2inches to
12inches.

fig 3.1 actual size of chip

Biochip/Biochip Architecture 4

3.2Components

The transponder: The transponder is the actual biochip implant. It is a passive transponder, meaning
it contains no battery or energy of it's own. In comparison, an active transponder would provide it’s
own energy source, normally a small battery.
Because the passive biochip contains no battery, or
nothing to wear out, it has a very long life, up to 99
years, and no maintenance. Being passive, it's
inactive until the reader activates it by sending it a
low-power electrical charge. The reader "reads" or

Fig 3.2 Components

"scans" the implanted biochip and receives back data (in this case an identification number) from
the biochip. The communication between biochip and reader is via low-frequency radio waves. The
biochip-transponder consists of four parts; computer microchip, antenna coil, capacitor and the
glass capsule.

Computer Microchip: The microchip stores a unique identification number from 10 to 15 digits
long. The storage capacity of the current microchips is limited, capable of storing only a single ID
number. AVID (American Veterinary Identification Devices), claims their chips, using a nnn-nnn-
nnn format, has the capability of over 70 trillion unique numbers. The unique ID number is "etched"
or encoded via a laser onto the surface of the microchip before assembly. Once the number is
encoded it is impossible to alter. The microchip also contains the electronic circuitry necessary to
transmit the ID number to the "reader".

Antenna Coil: This is normally a simple, coil of copper wire around a ferrite or iron core. This
tiny, primitive, radio antenna "receives and sends" signals from the reader or scanner.

Tuning Capacitor: The capacitor stores the small electrical charge (less than 1/1000 of a watt)
sent by the reader or scanner, which activates the transponder. This "activation" allows the
transponder to send back the ID number encoded in the computer chip. Because "radio waves" are
utilized to communicate between the transponder and reader, the capacitor is "tuned" to the same
frequency as the reader.

Biochip/Biochip Architecture 5

Glass Capsule: The glass capsule "houses" the microchip, antenna coil and capacitor. It is a small

capsule, the smallest measuring 11 mm in length and 2 mm in diameter, about the size of an
uncooked grain of rice. The capsule is made of biocompatible material such as soda lime glass.
After assembly, the capsule is hermetically (air-tight) sealed, so no bodily fluids can touch the
electronics inside. Because the glass is very smooth and susceptible to movement, a material such
as a polypropylene polymer sheath is attached to one end of the capsule. This sheath provides a
compatible surface which the bodily tissue fibers bond or interconnect, resulting in a permanent
placement of the biochip.

3.3Cost:Biochips are not cheap, though the price is falling rapidly. A year ago, human biochips
cost $2,000 per unit. Currently human biochips cost $1,000, while chips for mice, yeast, and fruit
flies cost around $400 to $500. The price for human biochips will probably drop to $500 this year.
Once all the human genes are well characterized and all functional human SNPs are known,
manufacture of the chips could conceivably be standardized. Then, prices for biochips, like the
prices for computer memory chips, would fall through the floor.

Biochip /Architecture 6

Chapter4

Applications of Biochip

4.1Genomics

Genomics is the study of gene sequences in living organisms and being able to read and interpret
them. The human genome has been the biggest project undertaken to date but there are many
research projects around the world trying to map the gene sequences of other organisms. The use of
Biochip facilitate: Automated genomic analysis including genotyping, gene expression DNA
isolation from complex matrices with aim to increase recovery efficiency DNA amplification by
optimizing the copy numberDNA hybridization assays to improve speed and stringency .
4.2Proteomics

Proteome analysis or Proteomics is the investigation of all the proteins present in a cell, tissue or
organism. Proteins, which are responsible for all biochemical work within a cell, are often the
targets for development of new drugs. The use of Biochip facilitate:

 High throughput proteomic
analysis
 Multi-dimensional
microseparations (pre LC/MS) to achieve high plate number
 Electrokinetic sample injection
for fast, reproducible, samples
 Stacking or other
preconcentration methods (as a precursor to biosensors) to improve
detection limits
 Kinetic analysis of
interactions between proteins to enable accurate, transport-free kinetics

4.3Cellomics

Every living creature is made up of cells, the basic building blocks of life.. Cells are used widely by
for several applications including study of drug cell interactions for drug discovery, as well as in
biosensing. The use of Biochip facilitate:
Biochip /Applications of Biochip 7

 Design/develop
"lab-in-cell" platforms handling single or few cells with nanoprobes in carefully
controlledenvironments.
 Cell handling, which involve

sorting and positioning of the cells optimally using DEP, optical traps
etc.
 Field/reagent based cell lysis,
where the contents of the cell are expelled out by breaking the membrane,
or increase the efficiency of transfection using reagents/field
 Intracellular processes to obtain
high quality safety/toxicity ADME/T data

4.4Biodiagnostics and (Nano) Biosensors

Biodiagnostics or biosensing is the field of sensing biological molecules based on electrochemical,
biochemical, optical, luminometric methods. The use of Biochip facilitate: Genetic/Biomarker
Diagnostics, development of Biowarfare sensors which involves optimization of the platform,
reduction in detection time and improving the signal-to-noise ratio

 Selection of detection platform where different formats such as lateral flow vs. microfluidics
are compared for ease/efficiency Incorporation of suitablesensing modality by evaluating
tradeoffs and downselect detection modes(color / luminometric, electrochemical,
biochemical, optical methods) forspecific need.

4.5 Protein Chips for Diagnosis and Analysis of Diseases

The Protein chip is a micro-chip with its surface modified to detect various disease causing
proteins simultaneously in order to help find a cure for them. Bio-chemical materials such as
antibodies responding to proteins, receptors, and nucleic acids are to be fixed to separate and
analyze protein.

Biochip /Application of Biochip 8

Chapter5

Human interface to Biochip

Biochips provide interfaces between living systems and electro-mechanical and computational
devices. These chips may be used in such varied applications as artificial sensors, prosthesis,
portable/disposable laboratories or even as implantable devices to enhance human life. Biochips
promise dramatic changes in future medical science and human life in general. With the advances of
bio and nano technologies two strong paradigms of integrated electronic and life are emerging.
Biosensor chips can provide the construction of sophisticated human sensing systems such as nose
and ears. The second paradigm is chips for sensing biology that will provide for interactions with
living bodies and build new diagnosis tools (such as diabetes glucose meters) or new medicines
(such as a bio-assay chip). A tiny microchip, the size of a grain of rice, is simply placed under the
skin. It is so designed as to be injected simultaneously with a vaccination or alone."
The biochip is inserted into the subject with a hypodermic syringe. Injection is safe and
simple, comparable to common vaccines. Anesthesia is not required nor recommended. In dogs and
cats, the biochip is usually injected behind the neck between the shoulder blades. Trovan, Ltd.,
markets an implant, featuring a patented "zip quill", which you simply press in, no syringe is
needed. According to AVID "Once implanted, the identity tag is virtually impossible to retrieve. . .
The number can never be altered."

Fi5.1 Human interfacing of Biochip
Biochip /Human interface to biochip 9

The syringe used is of a normal size seringe & the chip can be placed below the skin layer very
easily.

Fig 5.2 Syringe to implant Biochip

First Implant of Biochip

On May 10 2002, three members of a family in Florida ("medical pioneers," according to a
fawning report on the CBS Evening News) became the first people to receive the implants. Each
device, made of silicon and called a VeriChip™, is a small radio transmitter about the size of a
piece of rice that is injected under a person's skin. It transmits a unique personal ID number
whenever it is within a few feet of a special receiver unit. VeriChip's maker describes it as "a
miniaturized, implantable, radio frequency identification device (RFID) that can be used in a variety
of security, emergency and healthcare applications.

Biochip /Human interface to biochip 10

CHAPTER6
ADVANTAGES & DISADVANTAGES

Advantages
.The ability to detect multiple viral agents in parallel e.g. differential diagnosis of agents from other
diseases that cause similar clinical symptoms, or the recognition of complex mixtures of agents.
.Clarification of syndromes of unknown aetiology .Increase speed of diagnosis of unknown
pathogens ("future proofed" surveillance tools).
.Viral typing (AIV, FMDV, Rabies)
.Drive policy for diagnostics and disease control.
.Epidemiological tracing
.Interagency collaboration. The consortium consists of National, EU and OIE referencelaboratories
and has access to real sample material from a wide selection of hosts and viruses.
Disadvantages
.These methods have problems that a DNA chip cannot be fabricated at high density and mass
production is limited. Thus, these methods are applicable to fabrication of a DNA chip for study.
.Meanwhile, the DNA chip and the DNA microarray have different fabrication methods but are
similar in that different oligonucleotides are aligned on a square spot having a certain size in a
check pattern.

Biochip/Advantages & Disadvantage 11

CHAPTER7
Developments & Projects

View of the Future
The immediate prospects for biochip technology depend on a range of technologic and economic
issues. One is the question of chip reusability. Current biochips are of necessity disposable, in part
because the current devices are not physically robust. For example, nucleic acid probes tend to
break away from a supporting glass plate. A decade from now, this problem may have been better
addressed, making the chips more reusable, and perhaps at the same time permitting probes with
longer spans of genetic data than are feasible today. In this way, a manufacturing improvement
might facilitate more powerful forms of genetic analysis. On the
other hand, it may be better to manufacture biochips so inexpensive that they can be used once and
then discarded. Another issue is biochip versatility. Current biochips are single-purpose, hardwired
devices. Even if future biochips do not become programmable, in the fashion of computer chips,
they may become usable for multiple purposes, such as the analysis of a tissue sample for
numerous pathogens. An overarching issue is standardization. For diagnostic purposes, any medical
test should be administered, and its results interpreted, in a standardized way. Beyond that,
it seems desirable for biochips performing different tests to have an output detectable by the same
readout device. Hence, a race is underway to create a biochip platform or motherboard capable of
handling a wide range of biochips, irrespective of the internal details of a given chip's function. In
particular, two companies, Affymetrix and Molecular Dynamics, have formed the Genetic Analysis
Technology Consortium, or GATC (a name that also represents the four nucleotides that carry
genetic code in DNA). The hope is to establish industry-wide standards for the reading of biochips.

Biochip/Developments & Projects 12

Research by Willson Research Group
The University of Texas at Austin

Most biochips are 2D arrays of sensors placed carefully in a grid arrangement. The position of the
sensor on the chip determines its function. For example, a sensor at the x-y coordinate (4,5) might
sense the antibody for HIV, while the sensor at (7,3) might sense the antibody for an influenza virus.
To place the sensors in precise coordinates, sophisticated and expensive microdeposition techniques
are used. The sensors are essentially placed one at a time, or serially, on the chip. Thus, throughput
and yield tend to be low.

Theyare developing a biochip that indexes sensor function to its shape, instead of its position on the
chip. Thus, the sensors can be placed anywhere. Image recognition software can then then used to
read the chip. The shaped sensors are made via a novel contact lithography. The benefits of this
approach are multifold:

 The sensors can be batch produced and then assembled together in parallel, providing high
throughput and high yield.
 The sensors can be packed very tightly together, unlike those deposited with
microdeposition systems.
 The sensors are 3D in nature, and thus provide a higher signal than 2D sensors of other
chips.
 Almost any chemistry can be incorporated into the sensors. Most biochips use only one type
of chemistry.
 Because the sensors are produced offline and assembled later, they can be custom tailoredfor
their specific application.

Biochip/Develpment & projects 13

CHAPTER8
CONCLUSION

Biochips are fast, accurate, miniaturized, and can be expected to become economically
advantageous attributes that make them analogous to a computer chip. One expects to see an
accelerated trend of ultraminiaturization, perhaps involving entirely novel media, and an increased
ability to analyze not only genetic material but also other types of biologic molecules. One expects,
too, an eventual harmonization of technologies, so that dominant fabrication strategies will emerge,
at least for certain types of applications, including a favored format for genetic analysis and another
for antibodies and other proteins. Since the potential applications are vast, both for research and for
clinical use, the potential markets for biochips will be huge, a powerful driving force for their
continued development .

Biochip/Conclusion 14

CHAPTER9

REFERENCES

1. Marshall,A., Hodgson, J., DNA chips: An array of possibilities, Nature Biotechnology,
1998, 16: 27.

2. Kricha, L.J., Miniaturization of analytical systems, Clinical Chemistry, 1998, 44 : 2088.

3. Vahid Bemanian, Frøydis D. Blystad, Live Bruseth, Gunn A. Hildrestrand, Lise Holden,
Endre Kjærland, Pål Puntervoll, Hanne Ravneberg and Morten Ruud, "What is Bioethics?"
Dec 1998.

4. Fan et al. (2009). "Two-Dimensional Electrophoresis in a Chip". Lab-on-a-Chip
Technology: Biomolecular Separation and Analysis. Caister Academic.
5. Herold, KE; Rasooly, A (editor) (2009). Lab-on-a-Chip Technology: Fabrication and
Microfluidics

Biochip/References 15

Bio Chip Project Report

More Related Content

What's hot (20)

Similar to Bio Chip Project Report (20)

Recently uploaded (20)

Bio Chip Project Report