Ccna 1 module 1 v4.0

1. Which of the following descriptions are true regarding the management connections on a Cisco
router? (Choose three.)
- They are non-network connections.
They are used to connect the router to the rest of the production network.
They are synchronous serial ports.
- They are used for initial router configuration.
- They are asynchronous serial ports.
They are accessed using their assigned IP address.
2. The console port can be used for which of the following? (Choose three.)
- debugging.
- password recovery.
routing data between networks.
- troubleshooting.
connecting one router to another.
3. Which of the following describes the function of a WAN?
connects peripherals in a single location.
connects multiple networks in a single building.
provides connectivity on a LAN.
- provides connectivity over a large geographic area.
4. An internetwork must include which of the following? (Choose three.)
- switching.
static addressing.
IETF standardization.
- dynamic or static routing.
- consistent end-to-end addressing.
5. ABC Company just purchased three new routers to start their company network. Which items are
needed to establish a terminal session between a PC and the router for the initial configuration?
(Choose three.)
straight-through cable.
- terminal emulation software.
- rollover cable.
- RJ-45 to DB-9 connector.
V.35 cable.
6.Terminal emulation software, such as HyperTerminal, can be used to configure a router. Which of
the following HyperTerminal options shown in the graphic are correctly set to allow configuration of
a Cisco router? (Choose three.)
bits per second.
- data bits.
- parity.
- stop bits.

flow control.
7. Which of the following devices are used in the construction of a WAN? (Choose three.)
hubs.
- routers.
- communication servers.
transceivers.
- modems.
multi-port repeaters.
8. Which of the following are functions of RAM? (Choose three.)
contains startup configuration file.
- stores routing table.
- holds fast switching cache.
retains contents when power is removed.
- stores running configuration file.
9. Why is a console connection to a router or switch preferred when troubleshooting? (Choose two.)
can be accessed remotely.
- does not depend on network services.
- displays startup and error messages by default.
does not require special components.
10. Which basic components do a router and a standard desktop PC have in common? (Choose
three.)
- CPU.
hard drive.
- input/output interfaces.
keyboard.
monitor.
- system bus.
11. During the initial configuration of a 2600 series Cisco router, which cable is required for
connecting a PC to the console port?
twisted.
crossover.
- rollover.
straight.
12. A router is composed of many internal components. Which of the following components stores a
copy of the router's configuration file?
metal-oxide memory.
read only memory.
flash memory.
- non-volatile random access memory.

13. What contains the instructions that a router uses to control the flow of traffic through its
interfaces?
packet configuration.
- configuration files.
flash memory.
internal components.
14. Several Ethernet hosts on a LAN need the gateway services of a Cisco 2500 series router. Which
of the following would be needed to physically connect a router to all of the hosts on the LAN?
(Choose two.)
a crossover cable between the transceiver on a router and a switch.
a crossover cables between a switch and hosts on a LAN.
a straight-through cable between the auxiliary port on a router and a switch.
a rollover cable between the console port on a router and a switch.
- straight-through cables between a switch and hosts on a LAN.
- a straight-through cable between the transceiver on a router and a switch.
15. Which router component holds the configuration file when power is lost?
volatile random access memory.
read only memory.
- non-volatile random access memory.
flash memory.
16. Which of the following layers of the OSI model are incorporated in WAN standards? (Choose
two.)
- physical layer.
application layer.
transport layer.
- data link layer.
session layer.
17. Which of the following are true regarding router interfaces? (Choose three.)
provide temporary memory for the router configuration files.
- connect the router to the network for packet entry and exit.
- can be on the motherboard or a separate module.
hold the IOS image.
- connect the router to LANs and WANs.
18. Which of the following tasks can be accomplished through a management connection on a
router? (Choose three.)
- troubleshooting problems.
- monitoring the system.
capturing LAN data packets.
- configuring the router.

routing data packets.
19. What do routers use to select the best path for outgoing data packets?
ARP tables.
bridging tables.
- routing tables.
switching tables.
20. Which of the following are functions of NVRAM? (Choose two.)
stores the routing table.
- retains contents when power is removed.
- stores the startup configuration file.
contains the running configuration file.
stores the ARP table.
21. Select the statements that correctly describe flash memory in a 2600 series router? (Choose
two.)
holds the startup configuration by default.
- can be upgraded with single in-line memory modules.
- stores Cisco IOS software images.
stores routing table information by default.
maintains the only copy of an IOS image after the router is booted.

Ccna 1 module 1 v4.0

More Related Content

What's hot (19)

Similar to Ccna 1 module 1 v4.0 (20)

Recently uploaded (20)

Ccna 1 module 1 v4.0