Ccna day1
4 likes1,031 views
The document discusses the CCNA certification exam including details about the exam such as number of questions, duration, passing score, and benefits of obtaining the certification. It also provides information about networking devices, topologies, protocols, and the OSI model layers. Key topics covered include switches, routers, network topologies like star and bus, the 7 layers of the OSI model and what each layer is responsible for, and how data is encapsulated as it moves through the layers from physical to application.
Ccna day1
- 2. Communications and Services Certifications
- 3. CCNA
- 4. CCNA Exam Exam Number - 640-801 Total Marks - 1000 Duration – 90 Mts Passing score – 849 Questions -45-55 Multiple Choice Simulations Drag and Drop
- 5. Benefits Peer Validation Personal Potential Employer Career advancement
- 6. Cisco Icons and Symbols
- 7. Data Networks Sharing data through the use of floppy disks is not an efficient or cost-effective manner. Businesses needed a solution that would successfully address the following three problems: How to avoid duplication of equipment and resources How to communicate efficiently How to set up and manage a network Businesses realized that networking technology could increase productivity while saving money.
- 8. Networking Devices Equipment that connects directly to a network segment is referred to as a device. These devices are broken up into two classifications. End-user devices Network devices End-user devices include computers, printers, scanners, and other devices that provide services directly to the user. Network devices include all the devices that connect the end-user devices together to allow them to communicate .
- 9. Network Interface Card A network interface card (NIC) is a printed circuit board that provides network communication capabilities to and from a personal computer. Also called a LAN adapter.
- 10. Hub Connects a group of Hosts
- 11. Switch Switches add more intelligence to data transfer management.
- 12. Router Routers are used to connect networks together Route packets of data from one network to another Cisco became the de facto standard of routers because of their high-quality router products Routers, by default, break up a broadcast domain
- 13. Network Topologies Network topology defines the structure of the network. One part of the topology definition is the physical topology, which is the actual layout of the wire or media. The other part is the logical topology,which defines how the media is accessed by the hosts for sending data.
- 14. Bus Topology A bus topology uses a single backbone cable that is terminated at both ends. All the hosts connect directly to this backbone.
- 15. Ring Topology A ring topology connects one host to the next and the last host to the first. This creates a physical ring of cable.
- 16. Star Topology A star topology connects all cables to a central point of concentration .
- 17. Extended Star Topology An extended star topology links individual stars together by connecting the hubs and/or switches.This topology can extend the scope and coverage of the network.
- 18. Mesh Topology A mesh topology is implemented to provide as much protection as possible from interruption of service. Each host has its own connections to all other hosts. Although the Internet has multiple paths to any one location, it does not adopt the full mesh topology.
- 19. Physical and Logical Topology
- 20. LANs, MANs, & WANs One early solution was the creation of local-area network (LAN) standards which provided an open set of guidelines for creating network hardware and software, making equipment from different companies compatible. What was needed was a way for information to move efficiently and quickly, not only within a company, but also from one business to another. The solution was the creation of metropolitan-area networks (MANs) and wide-area networks (WANs).
- 21. LANs
- 22. WANs
- 23. Virtual Private Network A VPN is a private network that is constructed within a public network infrastructure such as the global Internet. Using VPN, a telecommuter can access the network of the company headquarters through the Internet by building a secure tunnel between the telecommuter’s PC and a VPN router in the headquarters .
- 24. Bandwidth
- 27. What Are The Components Of A Network ? Main Office Branch Office Home Office Mobile Users Internet
- 28. Network Structure & Hierarchy Distribution Layer Core Layer Access Layer
- 29. Institute of Electrical and Electronics Engineers (IEEE) 802 Standards IEEE 802.1: Standards related to network management. IEEE 802.2: General standard for the data link layer in the OSI Reference Model. The IEEE divides this layer into two sublayers -- the logical link control (LLC) layer and the media access control (MAC) layer. IEEE 802.3: Defines the MAC layer for bus networks that use CSMA/CD. This is the basis of the Ethernet standard. IEEE 802.4: Defines the MAC layer for bus networks that use a token-passing mechanism (token bus networks). IEEE 802.5: Defines the MAC layer for token-ring networks. IEEE 802.6: Standard for Metropolitan Area Networks (MANs)
- 30. The OSI Model
- 31. Why do we need the OSI Model? To address the problem of networks increasing in size and in number, the International Organization for Standardization (ISO) researched many network schemes and recognized that there was a need to create a network model This would help network builders implement networks that could communicate and work together ISO therefore, released the OSI reference model in 1984.
- 32. Don’t Get Confused. ISO - International Organization for Standardization OSI - Open System Interconnection IOS - Internetwork Operating System To avoid confusion, some people say “International Standard Organization .”
- 33. The OSI Reference Model 7 Application 6 Presentation 5 Session 4 Transport 3 Network 2 Data Link 1 Physical The OSI Model will be used throughout your entire networking career! Memorize it!
- 34. OSI Model Data Flow Layers Transport Data-Link Network Physical Application (Upper) Layers Session Presentation Application
- 35. Layer 7 - The Application Layer 7 Application 6 Presentation 5 Session 4 Transport 3 Network 2 Data Link 1 Physical Each of the layers have Protocol Data Unit (PDU ) This layer deal with networking applications. Examples: Email Web browsers PDU - User Data
- 36. Layer 6 - The Presentation Layer 7 Application 6 Presentation 5 Session 4 Transport 3 Network 2 Data Link 1 Physical This layer is responsible for presenting the data in the required format which may include: Code Formatting Encryption Compression PDU - Formatted Data
- 37. Layer 5 - The Session Layer 7 Application 6 Presentation 5 Session 4 Transport 3 Network 2 Data Link 1 Physical This layer establishes, manages, and terminates sessions between two communicating hosts. Creates Virtual Circuit Coordinates communication between systems Organize their communication by offering three different modes Simplex Half Duplex Full Duplex Example: Client Software ( Used for logging in) PDU - Formatted Data
- 38. Half Duplex It uses only one wire pair with a digital signal running in both directions on the wire. It also uses the CSMA/CD protocol to help prevent collisions and to permit retransmitting if a collision does occur. If a hub is attached to a switch, it must operate in half-duplex mode because the end stations must be able to detect collisions. Half-duplex Ethernet—typically 10BaseT—is only about 30 to 40 percent efficient because a large 10BaseT network will usually only give you 3 to 4Mbps—at most.
- 39. Full Duplex In a network that uses twisted-pair cabling, one pair is used to carry the transmitted signal from one node to the other node. A separate pair is used for the return or received signal. It is possible for signals to pass through both pairs simultaneously. The capability of communication in both directions at once is known as full duplex.
- 40. Layer 4 - The Transport Layer 7 Application 6 Presentation 5 Session 4 Transport 3 Network 2 Data Link 1 Physical This layer breaks up the data from the sending host and then reassembles it in the receiver. It also is used to insure reliable data transport across the network. Can be reliable or unreliable Sequencing Acknowledgment Retransmission Flow Control PDU - Segments
- 41. Layer 3 - The Network Layer 7 Application 6 Presentation 5 Session 4 Transport 3 Network 2 Data Link 1 Physical Sometimes referred to as the “Cisco Layer”. End to End Delivery Provide logical addressing that routers use for path determination Segments are encapsulated Internetwork Communication Packet forwarding Packet Filtering Makes “Best Path Determination” Fragmentation PDU – Packets – IP/IPX
- 42. Layer 2 - The Data Link Layer 7 Application 6 Presentation 5 Session 4 Transport 3 Network 2 Data Link 1 Physical Performs Physical Addressing This layer provides reliable transit of data across a physical link. Combines bits into bytes and bytes into frames Access to media using MAC address Error detection, not correction LLC and MAC Logical Link Control performs Link establishment MAC Performs Access method PDU - Frames DATA FCS Data length SMAC DMAC Preamble
- 43. Layer 1 - The Physical Layer 7 Application 6 Presentation 5 Session 4 Transport 3 Network 2 Data Link 1 Physical This is the physical media through which the data, represented as electronic signals, is sent from the source host to the destination host. Move bits between devices Encoding PDU - Bits
- 44. Data Encapsulation Transport Data-Link Physical Network Upper-Layer Data Upper-Layer Data TCP Header Data IP Header Data LLC Header 0101110101001000010 Data MAC Header Presentation Application Session Segment Packet Bits Frame PDU FCS FCS
- 46. OSI Model Analogy Application Layer - Source Host After riding your new bicycle a few times in Bangalore, you decide that you want to give it to a friend who lives in DADAR, Mumbai.
- 47. OSI Model Analogy Presentation Layer - Source Host Make sure you have the proper directions to disassemble and reassemble the bicycle.
- 48. OSI Model Analogy Session Layer - Source Host Call your friend and make sure you have his correct address.
- 49. OSI Model Analogy Transport Layer - Source Host Disassemble the bicycle and put different pieces in different boxes. The boxes are labeled “ 1 of 3”, “2 of 3”, and “3 of 3”.
- 50. OSI Model Analogy Network Layer - Source Host Put your friend's complete mailing address (and yours) on each box.Since the packages are too big for your mailbox (and since you don’t have enough stamps) you determine that you need to go to the post office.
- 51. OSI Model Analogy Data Link Layer – Source Host Bangalore post office takes possession of the boxes.
- 52. OSI Model Analogy Physical Layer - Media The boxes are flown from Bangalore to Mumbai.
- 53. OSI Model Analogy Data Link Layer - Destination Dadar post office receives your boxes.
- 54. OSI Model Analogy Network Layer - Destination Upon examining the destination address, Dadar post office determines that your boxes should be delivered to your written home address.
- 55. OSI Model Analogy Transport Layer - Destination Your friend calls you and tells you he got all 3 boxes and he is having another friend named BOB reassemble the bicycle.
- 56. OSI Model Analogy Session Layer - Destination Your friend hangs up because he is done talking to you.
- 57. OSI Model Analogy Presentation Layer - Destination BOB is finished and “presents” the bicycle to your friend. Another way to say it is that your friend is finally getting him “present”.
- 58. OSI Model Analogy Application Layer - Destination Your friend enjoys riding his new bicycle in Dadar.
- 59. Data Flow Through a Network
- 60. Type of Transmission Unicast Multicast Broadcast
- 62. Broadcast Domain A group of devices receiving broadcast frames initiating from any device within the group Routers do not forward broadcast frames, broadcast domains are not forwarded from one broadcast to another .
- 63. Collision The effect of two nodes sending transmissions simultaneously in Ethernet. When they meet on the physical media, the frames from each node collide and are damaged.
- 64. Collision Domain The network area in Ethernet over which frames that have collided will be detected. Collisions are propagated by hubs and repeaters Collisions are Not propagated by switches, routers, or bridges
- 65. Physical Layer Defines Media type Connector type Signaling type Ethernet 802.3 V.35 Physical EIA/TIA-232 802.3 is responsible for LANs based on the carrier sense multiple access collision detect (CSMA/CD) access methodology. Ethernet is an example of a CSMA/CD network.
- 66. Physical Layer: Ethernet/802.3 Hub Hosts Host 10Base2—Thin Ethernet 10Base5—Thick Ethernet 10BaseT—Twisted Pair
- 67. Device Used At Layer 1 Physical All devices are in the same collision domain. All devices are in the same broadcast domain. Devices share the same bandwidth. A B C D
- 68. Hubs & Collision Domains More end stations means more collisions. CSMA/CD is used.
- 69. Layer 2 Data Source Address FCS Length Destination Address Variable 2 6 6 4 0000.0C xx.xxxx Vendor Assigned IEEE Assigned MAC Layer—802.3 Preamble Ethernet II uses “Type” here and does not use 802.2. MAC Address 8 Number of Bytes synchronize senders and receivers
- 70. Devices On Layer 2 (Switches & Bridges) Each segment has its own collision domain. All segments are in the same broadcast domain. Data-Link OR 1 2 3 1 2 4
- 71. Switches Each segment is its own collision domain. Broadcasts are forwarded to all segments. Memory Switch
- 72. Layer 3 : Network Layer Defines logical source and destination addresses associated with a specific protocol Defines paths through network Network IP, IPX Data-Link Physical EIA/TIA-232 V.35 Ethernet Frame Relay HDLC 802.2 802.3
- 73. Layer 3 : (cont.) Data Source Address Destination Address IP Header 172.15.1.1 Node Network Logical Address Network Layer End-Station Packet Route determination occurs at this layer, so a packet must include a source and destination address. Network-layer addresses have two components: a network component for internetwork routing, and a node number for a device-specific address. The example in the figure is an example of an IP packet and address .
- 74. Layer 3 (cont.) 11111111 11111111 00000000 00000000 10101100 00010000 01111010 11001100 Binary Mask Binary Address 172.16.122.204 255.255.0.0 172 16 122 204 255 Address Mask 255 0 0 Network Host
- 75. Device On Layer 3 Router Broadcast control Multicast control Optimal path determination Traffic management Logical addressing Connects to WAN services
- 76. Layer 4 : Transport Layer Distinguishes between upper-layer applications Establishes end-to-end connectivity between applications Defines flow control Provides reliable or unreliable services for data transfer Network IPX IP Transport SPX TCP UDP
- 77. Reliable Service Synchronize Acknowledge, Synchronize Acknowledge Data Transfer (Send Segments) Sender Receiver Connection Established
- 78. How They Operate Hub Bridge Switch Router Collision Domains: 1 4 4 4 Broadcast Domains: 1 1 1 4
- 79. TCP/IP MODEL
- 80. Why Another Model? Although the OSI reference model is universally recognized, the historical and technical open standard of the Internet is Transmission Control Protocol / Internet Protocol (TCP/IP). The TCP/IP reference model and the TCP/IP protocol stack make data communication possible between any two computers, anywhere in the world, at nearly the speed of light . The U.S. Department of Defense (DoD) created the TCP/IP reference model because it wanted a network that could survive any conditions, even a nuclear war.
- 81. TCP/IP Protocol Stack 7 6 5 4 3 2 5 4 3 2 Application Presentation Session Transport Network Data-Link Physical 1 Application Transport Internet Data-Link Physical 1
- 82. Application Layer Overview *Used by the Router Application Transport Internet Data-Link Physical File Transfer - TFTP* - FTP* - NFS E-Mail - SMTP Remote Login - Telnet* - rlogin* Network Management - SNMP* Name Management - DNS*
- 83. Transport Layer Overview Transmission Control Protocol (TCP) User Datagram Protocol (UDP) Application Transport Internet Data-Link Physical Connection-Oriented Connectionless
- 84. TCP Segment Format Source Port (16) Destination Port (16) Sequence Number (32) Header Length (4) Acknowledgment Number (32) Reserved (6) Code Bits (6) Window (16) Checksum (16) Urgent (16) Options (0 or 32 if Any) Data (Varies) 20 Bytes Bit 0 Bit 15 Bit 16 Bit 31
- 85. Port Numbers TCP Port Numbers F T P Transport Layer T E L N E T D N S S N M P T F T P S M T P UDP Application Layer 21 23 25 53 69 161 R I P 520
- 86. TCP Port Numbers Source Port Destination Port … Host A 1028 23 … SP DP Host Z Telnet Z Destination port = 23. Send packet to my Telnet application.
- 87. TCP Port Numbers
- 88. TCP Three-Way Handshake/Open Connection Send SYN (seq = 100 ctl = SYN) SYN Received Send SYN, ACK (seq = 300 ack = 101 ctl = syn,ack) Established (seq = 101 ack = 301 ctl = ack) Host A Host B SYN Received 1 2 3
- 89. Opening & Closing Connection
- 90. Windowing Windowing in networking means the quantity of data segments which is measured in bytes that a machine can transmit/send on the network without receiving an acknowledgement
- 91. Window Size = 1 TCP Simple Acknowledgment Sender Receiver Send 1 Receive 1 Receive ACK 2 Send ACK 2 Send 2 Receive 2 Receive ACK 3 Send ACK 3 Send 3 Receive 3 Receive ACK 4 Send ACK 4
- 92. TCP Sequence and Acknowledgment Numbers Source Port Destination Port … Sequence Acknowledgment 1028 23 Source Dest. 11 Seq. 101 Ack. 1028 23 Source Dest. 10 Seq. 100 Ack. 1028 23 Source Dest. 11 Seq. 100 Ack. 1028 23 Source Dest. 12 Seq. 101 Ack. I just got number 11, now I need number 12. I just sent number 11.
- 93. Windowing There are two window sizes—one set to 1 and one set to 3. When you’ve configured a window size of 1, the sending machine waits for an acknowledgment for each data segment it transmits before transmitting another If you’ve configured a window size of 3, it’s allowed to transmit three data segments before an acknowledgment is received.
- 94. Windowing
- 95. Transport Layer Reliable Delivery
- 96. Flow Control Another function of the transport layer is to provide optional flow control. Flow control is used to ensure that networking devices don’t send too much information to the destination, overflowing its receiving buffer space, and causing it to drop the sent information The purpose of flow control is to ensure the destination doesn't get overrun by too much information sent by the source
- 97. Flow Control SEQ 1024 SEQ 2048 SEQ 3072 A B 3072 3 Buffering Ack 3073 Win 0 CPU Busy Ack 3073 Win 3072 Window Update Sliding Windows Waiting
- 98. User Datagram Protocol (UDP) User Datagram Protocol (UDP) is the connectionless transport protocol in the TCP/IP protocol stack. UDP is a simple protocol that exchanges datagrams, without acknowledgments or guaranteed delivery. Error processing and retransmission must be handled by higher layer protocols. UDP is designed for applications that do not need to put sequences of segments together. The protocols that use UDP include: TFTP (Trivial File Transfer Protocol) SNMP (Simple Network Management Protocol) DHCP (Dynamic Host Control Protocol) DNS (Domain Name System)
- 99. No sequence or acknowledgment fields UDP Segment Format Source Port (16) Destination Port (16) Length (16) Data (if Any) 1 Bit 0 Bit 15 Bit 16 Bit 31 Checksum (16) 8 Bytes
- 100. TCP vs UDP
- 101. Internet Layer Overview In the OSI reference model, the network layer corresponds to the TCP/IP Internet layer. Internet Protocol (IP) Internet Control Message Protocol (ICMP) Address Resolution Protocol (ARP) Reverse Address Resolution Protocol (RARP) Application Transport Internet Data-Link Physical
- 102. IP Datagram Version (4) Destination IP Address (32) Options (0 or 32 if Any) Data (Varies if Any) 1 Bit 0 Bit 15 Bit 16 Bit 31 Header Length (4) Priority &Type of Service (8) Total Length (16) Identification (16) Flags (3) Fragment Offset (13) Time-to-Live (8) Protocol (8) Header Checksum (16) Source IP Address (32) 20 Bytes
- 103. Determines destination upper-layer protocol Protocol Field Transport Layer Internet Layer TCP UDP Protocol Numbers IP 17 6
- 104. Internet Control Message Protocol Application Transport Internet Data-Link Physical Destination Unreachable Echo (Ping) Other ICMP 1
- 105. Address Resolution Protocol Map IP MAC Local ARP 172.16.3.1 IP: 172.16.3.2 Ethernet: 0800.0020.1111 172.16.3.2 IP: 172.16.3.2 = ??? I heard that broadcast. The message is for me. Here is my Ethernet address. I need the Ethernet address of 176.16.3.2.
- 106. Reverse ARP Map MAC IP Ethernet: 0800.0020.1111 IP: 172.16.3.25 Ethernet: 0800.0020.1111 IP = ??? What is my IP address? I heard that broadcast. Your IP address is 172.16.3.25.
- 107. The Networking Media
- 108. Found by Xerox Palo Alto Research Center (PARC) in 1975 Original designed as a 2.94 Mbps system to connect 100 computers on a 1 km cable Later, Xerox, Intel and DEC drew up a standard support 10 Mbps – Ethernet II Basis for the IEEE’s 802.3 specification Most widely used LAN technology in the world Origin of Ethernet
- 109. 10 Mbps IEEE Standards - 10BaseT 10BaseT 10 Mbps, baseband, over Twisted-pair cable Running Ethernet over twisted-pair wiring as specified by IEEE 802.3 Configure in a star pattern Twisting the wires reduces EMI Fiber Optic has no EMI Unshielded twisted-pair RJ-45 Plug and Socket
- 110. Unshielded Twisted Pair Cable (UTP) most popular maximum length 100 m prone to noise Twisted Pair Cables
- 111. Baseband Transmission Entire channel is used to transmit a single digital signal Complete bandwidth of the cable is used by a single signal The transmission distance is shorter The electrical interference is lower Broadband Transmission Use analog signaling and a range of frequencies Continuous signals flow in the form of waves Support multiple analog transmission (channels) Modem Broadband Transmission Network Card Baseband Transmission Baseband VS Broadband
- 114. Crossover cable
- 115. Crossover cable
- 116. Rollover cable
- 118. Straight-Thru or Crossover Use straight-through cables for the following cabling: Switch to router Switch to PC or server Hub to PC or server Use crossover cables for the following cabling: Switch to switch Switch to hub Hub to hub Router to router PC to PC Router to PC
- 119. TCP/IP Math
- 120. Decimal to Binary 10 0 = 1 10 1 = 10 10 2 = 100 10 3 = 1000 1 10 100 1000 172 – Base 10 1 2 4 8 16 32 64 128 10101100– Base 2 2 0 = 1 2 1 = 2 2 2 = 4 2 3 = 8 2 4 = 16 2 5 = 32 2 6 = 64 2 7 = 128 10101100 172 2 70 100 172 0 0 4 8 0 32 0 128 172
- 121. Base 2 Number System 10110 2 = (1 x 2 4 = 16) + (0 x 2 3 = 0) + (1 x 2 2 = 4) + (1 x 2 1 = 2) + (0 x 2 0 = 0) = 22
- 122. Converting Decimal to Binary Convert 201 10 to binary: 201 / 2 = 100 remainder 1 100 / 2 = 50 remainder 0 50 / 2 = 25 remainder 0 25 / 2 = 12 remainder 1 12 / 2 = 6 remainder 0 6 / 2 = 3 remainder 0 3 / 2 = 1 remainder 1 1 / 2 = 0 remainder 1 When the quotient is 0, take all the remainders in reverse order for your answer: 201 10 = 11001001 2
- 123. Binary to Decimal Chart
- 124. Hex to Binary to Decimal Chart
- 125. Unique addressing allows communication between end stations. Path choice is based on destination address. Location is represented by an address Introduction to TCP/IP Addresses 172.18.0.2 172.18.0.1 172.17.0.2 172.17.0.1 172.16.0.2 172.16.0.1 SA DA HDR DATA 10.13.0.0 192.168.1.0 10.13.0.1 192.168.1.1
- 126. IP Addressing 255 255 255 255 Dotted Decimal Maximum Network Host 128 64 32 16 8 4 2 1 11111111 11111111 11111111 11111111 10101100 00010000 01111010 11001100 Binary 32 Bits 172 16 122 204 Example Decimal Example Binary 1 8 9 16 17 24 25 32 128 64 32 16 8 4 2 1 128 64 32 16 8 4 2 1 128 64 32 16 8 4 2 1
- 127. Class A: Class B: Class C: Class D: Multicast Class E: Research IP Address Classes 8 Bits 8 Bits 8 Bits 8 Bits Network Host Host Host Network Network Host Host Network Network Network Host
- 128. IP Address Classes 1 Class A: Bits: 0 NNNNNNN Host Host Host 8 9 16 17 24 25 32 Range (1-126) 1 Class B: Bits: 10 NNNNNN Network Host Host 8 9 16 17 24 25 32 Range (128-191) 1 Class C: Bits: 110 NNNNN Network Network Host 8 9 16 17 24 25 32 Range (192-223) 1 Class D: Bits: 1110 MMMM Multicast Group Multicast Group Multicast Group 8 9 16 17 24 25 32 Range (224-239)
- 129. Host Addresses 172.16.2.2 172.16.3.10 172.16.12.12 10.1.1.1 10.250.8.11 10.180.30.118 E1 172.16 12 12 Network Host . . Network Interface 172.16.0.0 10.0.0.0 E0 E1 Routing Table 172.16.2.1 10.6.24.2 E0
- 130. Classless Inter-Domain Routing (CIDR) Basically the method that ISPs (Internet Service Providers) use to allocate an amount of addresses to a company, a home Ex : 192.168.10.32/28 The slash notation (/) means how many bits are turned on (1s)
- 131. CIDR Values
- 132. Determining Available Host Addresses 11111111 172 16 0 0 10101100 00010000 00000000 00000000 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Network Host 00000000 00000001 11111111 11111111 11111111 11111110 ... ... 00000000 00000011 11111101 1 2 3 65534 65535 65536 – ... 2 65534 N 2 N – 2 = 2 16 – 2 = 65534
- 133. IP Address Classes Exercise Address Class Network Host 10.2.1.1 128.63.2.100 201.222.5.64 192.6.141.2 130.113.64.16 256.241.201.10
- 134. IP Address Classes Exercise Answers Address Class Network Host 10.2.1.1 128.63.2.100 201.222.5.64 192.6.141.2 130.113.64.16 256.241.201.10 A B C C B Nonexistent 10.0.0.0 128.63.0.0 201.222.5.0 192.6.141.0 130.113.0.0 0.2.1.1 0.0.2.100 0.0.0.64 0.0.0.2 0.0.64.16
- 135. Subnetting Subnetting is logically dividing the network by extending the 1’s used in SNM Advantage Can divide network in smaller parts Restrict Broadcast traffic Security Simplified Administration
- 136. Formula Number of subnets – 2 x -2 Where X = number of bits borrowed Number of Hosts – 2 y -2 Where y = number of 0’s Block Size = Total number of Address Block Size = 256-Mask
- 137. Subnetting Classful IP Addressing SNM are a set of 255’s and 0’s. In Binary it’s contiguous 1’s and 0’s. SNM cannot be any value as it won’t follow the rule of contiguous 1’s and 0’s. Possible subnet mask values 0 128 192 224 240 248 252 254 255
- 138. Network 172.16.0.0 Addressing Without Subnets 172.16.0.0 172.16.0.1 172.16.0.2 172.16.0.3 … ... 172.16.255.253 172.16.255.254
- 139. Network 172.16.0.0 Addressing with Subnets 172.16.1.0 172.16.2.0 172.16.3.0 172.16.4.0
- 140. Subnet Addressing 172.16.2.200 172.16.2.2 172.16.2.160 172.16.2.1 172.16.3.5 172.16.3.100 172.16.3.150 E0 172.16 Network Network Interface 172.16.0.0 172.16.0.0 E0 E1 New Routing Table 2 160 Host . . 172.16.3.1 E1
- 141. Subnet Addressing 172.16.2.200 172.16.2.2 172.16.2.160 172.16.2.1 172.16.3.5 172.16.3.100 172.16.3.150 172.16.3.1 E0 E1 172.16 2 160 Network Host . . Network Interface 172.16.2.0 172.16.3.0 E0 E1 New Routing Table Subnet
- 142. Subnet Mask 255 255 0 0 IP Address Default Subnet Mask 8-Bit Subnet Mask Network Host Network Host Network Subnet Host Also written as “ /16, ” where 16 represents the number of 1s in the mask Also written as “ /24, ” where 24 represents the number of 1s in the mask 11111111 11111111 00000000 00000000 172 16 0 0 255 255 255 0
- 143. Decimal Equivalents of Bit Patterns 0 0 0 0 0 0 0 0 = 0 1 0 0 0 0 0 0 0 = 128 1 1 0 0 0 0 0 0 = 192 1 1 1 0 0 0 0 0 = 224 1 1 1 1 0 0 0 0 = 240 1 1 1 1 1 0 0 0 = 248 1 1 1 1 1 1 0 0 = 252 1 1 1 1 1 1 1 0 = 254 1 1 1 1 1 1 1 1 = 255 128 64 32 16 8 4 2 1
- 144. Subnets not in use—the default Subnet Mask Without Subnets 16 Network Host 172 0 0 10101100 11111111 10101100 00010000 11111111 00010000 00000000 00000000 10100000 00000000 00000000 00000010 172.16.2.160 255.255.0.0 Network Number
- 145. Network number extended by eight bits Subnet Mask with Subnets 16 Network Host 172.16.2.160 255.255. 255 .0 172 2 0 10101100 11111111 10101100 00010000 11111111 00010000 11111111 00000010 10100000 00000000 00000000 00000010 Subnet Network Number 128 192 224 240 248 252 254 255
- 146. Subnet Mask with Subnets (cont.) Network number extended by ten bits Network Host 172.16.2.160 255.255. 255 . 192 10101100 11111111 10101100 00010000 11111111 00010000 11111111 00000010 10100000 11 000000 10 000000 00000010 Subnet 16 172 2 128 Network Number 128 192 224 240 248 252 254 255 128 192 224 240 248 252 254 255
- 147. Subnet Mask Exercise Address Subnet Mask Class Subnet 172.16.2.10 10.6.24.20 10.30.36.12 255.255.255.0 255.255.240.0 255.255.255.0
- 148. Subnet Mask Exercise Answers Address Subnet Mask Class Subnet 172.16.2.10 10.6.24.20 10.30.36.12 255.255.255.0 255.255.240.0 255.255.255.0 B A A 172.16.2.0 10.6.16.0 10.30.36.0
- 149. Broadcast Addresses 172.16.1.0 172.16.2.0 172.16.3.0 172.16.4.0 172.16.3.255 (Directed Broadcast) 255.255.255.255 (Local Network Broadcast) X 172.16.255.255 (All Subnets Broadcast)
- 150. Addressing Summary Example 10101100 11111111 10101100 00010000 11111111 00010000 11111111 00000010 10100000 11 000000 10 000000 00000010 10101100 00010000 00000010 10 111111 10101100 00010000 00000010 10 000001 10101100 00010000 00000010 10 111110 Host Mask Subnet Broadcast Last First 172.16.2.160 255.255.255.192 172.16.2.128 172.16.2.191 172.16.2.129 172.16.2.190 1 2 3 4 5 6 7 8 9 16 172 2 160
- 151. Subnet Address = 172.16.2.0 Host Addresses = 172.16.2.1–172.16.2.254 Broadcast Address = 172.16.2.255 Eight Bits of Subnetting Class B Subnet Example IP Host Address: 172.16.2.121 Subnet Mask: 255.255.255.0 Network Subnet Host 10101100 00010000 00000010 11111111 172.16.2.121: 255.255.255.0: 10101100 11111111 Subnet: 10101100 00010000 00010000 11111111 00000010 00000010 11111111 01111001 00000000 00000000 Broadcast: Network
- 152. Subnet Planning Other Subnets 192.168.5.16 192.168.5.32 192.168.5.48 20 Subnets 5 Hosts per Subnet Class C Address: 192.168.5.0
- 153. Class C Subnet Planning Example Subnet Address = 192.168.5.120 Host Addresses = 192.168.5.121–192.168.5.126 Broadcast Address = 192.168.5.127 Five Bits of Subnetting 11111 000 IP Host Address: 192.168.5.121 Subnet Mask: 255.255.255.248 Network Subnet Host 192.168.5.121: 11000000 11111111 Subnet: 11000000 10101000 10101000 11111111 00000101 00000101 11111111 01111001 01111 000 255.255.255.248: Broadcast: Network Network 11000000 10101000 00000101 01111111
- 154. Exercise 192.168.10.0 /27 ? – SNM ? – Block Size ?- Subnets
- 155. Exercise /27 ? – SNM – 224 ? – Block Size = 256-224 = 32 ?- Subnets 10.31 10.30 10.1 10.0 10.63 Broadcast 10.62 LHID 10.33 FHID 10.64 10.32 Subnets
- 156. Exercise 192.168.10.0 /30 ? – SNM ? – Block Size ?- Subnets
- 157. Exercise /30 ? – SNM – 252 ? – Block Size = 256-252 = 4 ?- Subnets 10.3 10.2 10.1 10.0 10.7 Broadcast 10.6 LHID 10.5 FHID 10.8 10.4 Subnets
- 158. Exercise ? ? ? /30 ? ? ? /29 ? ? ? Mask ? ? /28 ? ? /27 ? ? /26 Host Subnets
- 159. Exercise 2 64 252 /30 6 32 248 /29 240 224 192 Mask 14 16 /28 30 8 /27 62 4 /26 Host Subnets
- 160. Exam Question Find Subnet and Broadcast address 192.168.0.100/27
- 161. Exercise 192.168.10.54 /29 Mask ? Subnet ? Broadcast ?
- 162. Exercise 192.168.10.130 /28 Mask ? Subnet ? Broadcast ?
- 163. Exercise 192.168.10.193 /30 Mask ? Subnet ? Broadcast ?
- 164. Exercise 192.168.1.100 /26 Mask ? Subnet ? Broadcast ?
- 165. Exercise 192.168.20.158 /27 Mask ? Subnet ? Broadcast ?
- 166. Class B 172.16.0.0 /19 Subnets ? Hosts ? Block Size ?
- 167. Class B 172.16.0.0 /19 Subnets 2 3 -2 = 6 Hosts 2 13 -2 = 8190 Block Size 256-224 = 32 95.255 95.254 64.1 64.0 31.255 31.254 0.1 0.0 127.255 63.255 Broadcast 127.254 63.254 LHID 96.1 32.1 FHID 96.0 32.0 Subnets
- 168. Class B 172.16.0.0 /27 Subnets ? Hosts ? Block Size ?
- 169. Class B 172.16.0.0 /27 Subnets 2 11 -2 = 2046 Hosts 2 5 -2 = 30 Block Size 256-224 = 32 0.95 0.94 0.65 0.64 0.31 0.30 0.1 0.0 0.127 0.63 Broadcast 0.126 0.62 LHID 0.97 0.33 FHID 0.96 0.32 Subnets
- 170. Class B 172.16.0.0 /23 Subnets ? Hosts ? Block Size ?
- 171. Class B 172.16.0.0 /23 Subnets 2 7 -2 = 126 Hosts 2 9 -2 = 510 Block Size 256-254 = 2 5.255 5.254 4.1 4.0 1.255 1.254 0.1 0.0 7.255 3.255 Broadcast 7.254 3.254 LHID 6.1 2.1 FHID 6.0 2.0 Subnets
- 172. Class B 172.16.0.0 /24 Subnets ? Hosts ? Block Size ?
- 173. Class B 172.16.0.0 /24 Subnets 2 8 -2 = 254 Hosts 2 8 -2 = 254 Block Size 256-255 = 1 2.255 2.254 2.1 2.0 0.255 0.254 0.1 0.0 3.255 1.255 Broadcast 3.254 1.254 LHID 3.1 1.1 FHID 3.0 1.0 Subnets
- 174. Class B 172.16.0.0 /25 Subnets ? Hosts ? Block Size ?
- 175. Class B 172.16.0.0 /25 Subnets 2 9 -2 = 510 Hosts 2 7 -2 = 126 Block Size 256-128 = 128 1.255 1.254 1.129 1.128 2.255 2.254 2.129 2.128 2.127 2.126 2.1 2.0 1.127 1.126 1.1 1.0 0.127 0.126 0.1 0.0 0.255 Broadcast 0.254 LHID 0.129 FHID 0.128 Subnets
- 176. Find out Subnet and Broadcast Address 172.16.85.30/20
- 177. Find out Subnet and Broadcast Address 172.16.85.30/29
- 178. Find out Subnet and Broadcast Address 172.30.101.62/23
- 179. Find out Subnet and Broadcast Address 172.20.210.80/24
- 180. Exercise Find out the mask which gives 100 subnets for class B
- 181. Exercise Find out the Mask which gives 100 hosts for Class B
- 182. Class A 10.0.0.0 /10 Subnets ? Hosts ? Block Size ?
- 183. Class A 10.0.0.0 /10 Subnets 2 2 -2 = 2 Hosts 2 22 -2 = 4194302 Block Size 256-192 = 64 10.191.255.255 10.191.255.254 10.128.0.1 10.128 10.63.255.255 10.63.255.254 10.0.0.1 10.0 10.254.255.255 10.127.255.255 Broadcast 10.254.255.254 10.127.255.254 LHID 10.192.0.1 10.64.0.1 FHID 10.192 10.64 Subnets
- 184. Class A 10.0.0.0 /18 Subnets ? Hosts ? Block Size ?
- 185. Class A 10.0.0.0 /18 Subnets 2 10 -2 = 1022 Hosts 2 14 -2 = 16382 Block Size 256-192 = 64 10.0.191.255 10.0.191.254 10.0.128.1 10.0.128.0 10.0.63.255 10.0.63.254 10.0.0.1 10.0.0.0 10.0.254.255 10.0.127.255 Broadcast 10.0.254.254 10.0.127.254 LHID 10.0.192.1 10.0.64.1 FHID 10.0.192.0 10.0.64.0 Subnets
- 186. Broadcast Addresses Exercise Address Class Subnet Broadcast 201.222.10.60 255.255.255.248 Subnet Mask 15.16.193.6 255.255.248.0 128.16.32.13 255.255.255.252 153.50.6.27 255.255.255.128
- 187. Broadcast Addresses Exercise Answers 153.50.6.127 Address Class Subnet Broadcast 201.222.10.60 255.255.255.248 C 201.222.10.63 201.222.10.56 Subnet Mask 15.16.193.6 255.255.248.0 A 15.16.199.255 15.16.192.0 128.16.32.13 255.255.255.252 B 128.16.32.15 128.16.32.12 153.50.6.27 255.255.255.128 B 153.50.6.0
- 188. VLSM VLSM is a method of designating a different subnet mask for the same network number on different subnets Can use a long mask on networks with few hosts and a shorter mask on subnets with many hosts With VLSMs we can have different subnet masks for different subnets.
- 189. Variable Length Subnetting VLSM allows us to use one class C address to design a networking scheme to meet the following requirements: Bangalore 60 Hosts Mumbai 28 Hosts Sydney 12 Hosts Singapore 12 Hosts WAN 1 2 Hosts WAN 2 2 Hosts WAN 3 2 Hosts
- 190. Networking Requirements Bangalore 60 Mumbai 60 Sydney 60 Singapore 60 WAN 1 WAN 2 WAN 3 In the example above, a /26 was used to provide the 60 addresses for Bangalore and the other LANs. There are no addresses left for WAN links
- 191. Networking Scheme Mumbai 192.168.10.64/27 Bangalore 192.168.10.0/26 Sydney 192.168.10.96/28 Singapore 192.168.10.112/28 WAN 192.168.10.129 and 130 WAN 192.198.10.133 and 134 WAN 192.198.10.137 and 138 60 12 12 28 2 2 2 192.168.10.128/30 192.168.10.136/30 192.168.10.132/30
- 192. VLSM Exercise 2 2 2 40 25 12 192.168.1.0
- 193. VLSM Exercise 2 2 2 40 25 12 192.168.1.0 192.168.1.4/30 192.168.1.8/30 192.168.1.12/30 192.168.1.16/28 192.168.1.32/27 192.168.1.64/26
- 194. VLSM Exercise 2 2 8 15 5 192.168.1.0 2 2 35
- 195. Summarization Summarization, also called route aggregation, allows routing protocols to advertise many networks as one address. The purpose of this is to reduce the size of routing tables on routers to save memory Route summarization (also called route aggregation or supernetting) can reduce the number of routes that a router must maintain Route summarization is possible only when a proper addressing plan is in place Route summarization is most effective within a subnetted environment when the network addresses are in contiguous blocks
- 196. Summarization
- 197. Supernetting Network Subnet 172.16.12.0 11000000 11111111 10101000 11111111 00001100 11111111 255.255.255.0 Network Network 00000000 00000000 16 8 4 2 1 172.16.13.0 11000000 10101000 00001101 00000000 172.16.14.0 11000000 10101000 00001110 00000000 172.16.15.0 11000000 10101000 00001111 00000000
- 198. Supernetting Network Subnet 172.16.12.0 11000000 11111111 10101000 11111111 00001100 11111100 255.255.252.0 Network Network 00000000 00000000 16 8 4 2 1 172.16.13.0 11000000 10101000 00001101 00000000 172.16.14.0 11000000 10101000 00001110 00000000 172.16.15.0 11000000 10101000 00001111 00000000 172.16.12.0/24 172.16.13.0/24 172.16.14.0/24 172.16.15.0/24 172.16.12.0/22
- 199. Supernetting Question What is the most efficient summarization that TK1 can use to advertise its networks to TK2? A. 172.1.4.0/24172.1.5.0/24172.1.6.0/24172.1.7.0/24 B. 172.1.0.0/22 C. 172.1.4.0/25172.1.4.128/25172.1.5.0/24172.1.6.0/24172.1.7.0/24 D. 172.1.0.0/21 E. 172.1.4.0/22 R1 R2 172.1.7.0/24 172.1.6.0/24 172.1.5.0/24 172.1.4.128/25 172.1.4.128/25
Editor's Notes
- #5: True/False Multiple Choice Select the Correct Answer Select the Three Correct Answers Select All That Apply Type the command for viewing routes learned from an IP routing protocol. Simulations
- #6: Peer Validation – u understanding where u stand in the industry Personal - For knowledge gain Potential Employer – During the interview the company will filter by the certification Career Advancement – CCNA, CCNP, CCIE You can progress ur carrer in ur company
- #14: When you are cabling up your computers and networking devices, various types of topologies can be used. A topology defines how the devices are connected.
- #21: Metropolitan Area Networks A metropolitan area network (MAN) is a hybrid between a LAN and a WAN. Like a WAN, it connects two or more LANs in the same geographic area. A MAN, for example, might connect two different buildings or offices in the same city. However, whereas WANs typically provide low- to medium-speed access, MANs provide high-speed connections, such as T1 (1.544Mbps) and optical services. The optical services provided include SONET (the Synchronous Optical Network standard) and SDH (the Synchronous Digital Hierarchy standard). With these optical services, carriers can provide high-speed services, including ATM and Gigabit Ethernet. These two optical services (covered in Chapter 2 ) provide speeds ranging into the hundreds or thousands of megabits per second (Mbps). Devices used to provide connections for MANs include high-end routers, ATM switches, and optical switches.
- #24: A VPN typically provides authentication, confidentiality, and integrity to create a secure connection between two sites or devices. Authentication is provided to validate the identities of the two peers. Confidentiality provides encryption of the data to keep it private from prying eyes. And integrity is used to ensure that the data sent between the two devices or sites has not been tampered with.
- #27: When you looked at Figure 1.1, did you notice that the router is found at center stage, and that it connects each physical network together? We have to use this layout because of the older technologies involved–—bridges and hubs. Once we have only switches in our network, things change a lot! The LAN switches would then be placed at the center of the network world and the routers would be found connecting only logical networks together. If I’ve implemented this kind of setup, I’ve created virtual LANs (VLANs). On the top network in Figure 1.1, you’ll notice that a bridge was used to connect the hubs to a router. The bridge breaks up collision domains, but all the hosts connected to both hubs are still crammed into the same broadcast domain. Also, the bridge only created two collision domains, so each device connected to a hub is in the same collision domain as every other device connected to that same hub. This is pretty lame, but it’s still better than having one collision domain for all hosts. Notice something else: the three hubs at the bottom that are connected also connect to the router, creating one humongous collision domain and one humongous broadcast domain. This makes the bridged network look much better indeed!
- #29: Core Layer – Backbone Dist Layer- to connect Access layer to Core Layer Access Layer is the layer where all the end users reside Core Layer The core layer, as its name suggests, is the backbone of the network. It provides a high speed connection between the different distribution layer devices. Because of the need for high-speed connections, the core consists of high-speed switches and will not, typically, perform any type of packet or frame manipulations, Because switches are used at the core, the core is referred to as a layer-2 core Exam Watch The core provides a high-speed layer-2 switching infrastructure and typically does not manipulate packet contents. Distribution Layer Of the three layers, the distribution layer performs most of the connectivity tasks. In larger networks, routers are used at the distribution layer to connect the access layers to the core. For smaller networks, sometimes switches are used. Functions :- Containing broadcasts between the layers Securing traffic between the layers Providing a hierarchy through layer-3 logical addressing and route summarization Translating between different media types Access Layer The bottom layer of the three-layer hierarchical model is the access layer. Actually, the access layer is at the periphery of your campus network, separated from the core layer by the distribution layer. The main function of the access layer is to provide the user’s initial connection to your network. Typically, this connection is provided by a switch, or sometimes, a hub. Sometimes if the user works at a small branch office or home office, this device can also be a router. But in most cases, the connection is provided by a switch.
- #30: IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry
- #32: Before OSI it was difficult for the vendors to create network products OSI, why U need to study, its a structured approach to troubleshoot Each has independent model Before considering how to configure Cisco routers and switches, you must be introduced to basic networking concepts you’ll need to understand in order to grasp the advanced concepts discussed in later chapters ISO developed the seven-layer
- #36: top (seventh) layer of the OSI Reference Model is the application layer. It provides the user interface. Examples of TCP/IP applications include telnet, FTP, HTTP, and SMTP.
- #37: The Presentation layer gets its name from its purpose: It presents data to the Application layer and is responsible for data translation and code formatting Exam Watch The presentation layer determines how data is represented to the user. Examples of presentation layer protocols and standards include ASCII, BMP, GIF, JPEG, WAV, AVI, and MPEG. ASCII (the American Standard Code for Information Interchange, used by most devices today) uses seven bits to represent characters. EBCDIC (Extended Binary-Coded Decimal Interchange Code, developed by IBM) PICT A picture format used by Macintosh programs for transferring QuickDraw graphics. TIFF Tagged Image File Format; a standard graphics format for high-resolution, bitmapped images. JPEG Photo standards brought to us by the Joint Photographic Experts Group. Other standards guide movies and sound: MIDI Musical Instrument Digital Interface (sometimes called Musical Instrument Device Interface), used for digitized music. MPEG Increasingly popular Moving Picture Experts Group standard for the compression and coding of motion video for CDs. It provides digital storage and bit rates up to 1.5Mbps. QuickTime For use with Macintosh programs; manages audio and video applications. RTF Rich Text Format, a file format that lets you exchange text files between different word processors, even in different operating systems. Categorize as file type
- #38: Exam Watch The session layer is responsible for setting up and tearing down network connections. Examples include RPCs and NFS. The actual mechanics of this process, however, are implemented at the transport layer. To set up connections or tear down connections, the session layer communicates with the transport layer. Remote Procedure Call (RPC) is an example of an IP session protocol; the Network File System (NFS), which uses RPC, is an example application at this layer.
- #40: Full duplex means you can send and receive at the same time. This was impossible on coax, the original Ethernet media since it had only 1 conductor and Ethernet uses baseband signaling. However, 10BaseT and 100BaseT use a cable with 4 conductors. (Actually, there are typically 8 conductors but only 4 are used.) 1 pair of conductors is used to send data and the other to receive data. Each pair are also twisted around each other to help eliminate noise, hence the name unshielded twisted pair. With the right hardware you can theoretically double the speed of your network by sending and receiving simultaneously. Of course it’s a rare environment that has so much data to send in both directions but full duplex will give you a performance boost because you no longer have to wait for 1 host to finish sending before you start to send your data, i.e. a deferral
- #41: P rotocol D ata U nit . The term used to describe data as it moves from one layer of the OSI model to another.
- #43: Preamble is sequence of 1’s and 0’s signifies the beginning of a frame DataLen decides the length of Data, can be 64 to 1500 Bytes is called as MTU FCS is used for error detection CRC run on the data field and and the values is kept in FCS
- #44: The data is in Bits bits are converted to signals known as encoding The physical layer is also responsible for how binary information is converted to a physical layer signal. For example, if the cable uses copper as a transport medium, the physical layer defines how binary 1’s and 0’s are converted into an electrical signal by using different voltage levels. If the cable uses fiber, the physical layer defines how 1’s and 0’s are represented using an LED or laser with different light frequencies
- #64: Exam Watch Make sure you understand the mechanics of Ethernet: CSMA/CD. No device has priority over another device. If two devices transmit simultaneously, a collision occurs. When this happens, a jam signal is generated and the devices try to retransmit after waiting a random period.
- #65: If two or more machines simultaneously sense the wire and see no frame, and each places its frame on the wire, a collision will occur. In this situation, the voltage levels on a copper wire or the light frequencies on a piece of fiber get messed up. For example, if two NICs attempt to put the same voltage on an electrical piece of wire, the voltage level will be different than if only one device does so. Basically, the two original frames become unintelligible (or undecipherable). The NICs, when they place a frame on the wire, examine the status of the wire to ensure that a collision does not occur: this is the collision detection mechanism of CSMA/CD. If the NICs see a collision for their transmitted frames, they have to resend the frames. In this instance, each NIC that was transmitting a frame when a collision occurred creates a special signal, called a jam signal, on the wire, waits a small random time period, and senses the wire again. If no frame is currently on the wire, the NIC will then retransmit its original frame. The time period that the NIC waits is measured in microseconds, a delay that can’t be detected by a human. Likewise, the time period the NICs wait is random to help ensure a collision won’t occur again when these NICs retransmit their frames. The more devices you place on a segment, the more likely you are to experience collisions. If you put too many devices on the segment, too many collisions will occur, seriously affecting your throughput. Therefore, you need to monitor the number of collisions on each of your network segments. The more collisions you experience, the less throughput you’ll get. Normally, if your collisions are less than one percent of your total traffic, you are okay. This is not to say that collisions are bad —they are just one part of how Ethernet functions.
- #69: Tk-10-7
- #70: IEEE’s Version of Ethernet There are actually two variants of Ethernet: IEEE’s implementation and the DIX implementation. Ethernet was developed by three different companies in the early 1980s: Digital, Intel, and Xerox, or DIX for short. This implementation of Ethernet has evolved over time; its current version is called Ethernet II. Devices running TCP/IP typically use the Ethernet II implementation. The second version of Ethernet was developed by IEEE and is standardized in the IEEE 802.2 and 802.3 standards. IEEE has split the data link layer into two components: MAC and LLC. These components are described in Table 2-5 . The top part of the data link layer is the LLC, and its function is performed in software. The bottom part of the data link layer is the MAC, and its function is performed in hardware. Logical Link Control (LLC) 802.2 Defines how to multiplex multiple network layer protocols in the data link layer frame. LLC is performed in software. MAC 802.3 Defines how information is transmitted in an Ethernet environment, and defines the framing, MAC addressing, and mechanics as to how Ethernet works. MAC is performed in hardware
- #72: TK16-15
- #73: Logical Addressing – scenario Explain
- #77: Another function of the transport layer is to set up and maintain connections for the session layer. The information transferred to devices at the transport layer is called a segment. Because multiple connections may be established from one device to another device or devices, some type of multiplexing function is needed to differentiate between the various connections. This ensures that the transport layer can send data from a particular application to the correct destination and, when receiving data from a destination, get it to the right application. To accomplish this feat, the transport layer assigns a unique set of numbers for each connection. These numbers are called port or socket numbers. There is a source port number and a destination port number for each connection. The destination port numbers assigned by the source device are referred to as well-known port numbers. The source device uses an appropriate port number in the destination port field to indicate to the destination which application it is trying to access. For example, the TCP/IP protocol stack gives each application a unique port number.
- #78: A DNS query is a good example where using a connection-oriented service doesn’t make sense. With a DNS query, a device is trying to resolve a fully qualified domain name to an IP address. The device sends the single query to a DNS server and waits for the server’s response. In this process, only two messages are generated: the client’s query and the server’s response. Because of the minimal amount of information shared between these two devices, it makes no sense to establish a reliable connection first before sending the query. Instead, the device should just send its information and wait for a response. If a response doesn’t come back, the application can send the information again or the user can get involved. Again, with DNS, you can configure two DNS servers in the Microsoft Windows operating system. If you don’t get a reply from the first server, the application can use the second configured server.
- #82: Purpose: This figure shows the protocol layers and compares them with the layers of the OSI reference model. Emphasize: This figure shows the TCP/IP conceptual layer titles. The protocol stack is used several times in this chapter, and the lower two layers may be sometimes called the network interface layer. The terms “packet” and “datagram” are nearly interchangeable. However, a datagram is a unit of data, while a packet is a physical entity that appears on a network. In most cases, a packet contains a datagram. In some protocols, however, a datagram is divided into a number of packets to accommodate a requirement for smaller, transmittable pieces. Note: Creation and documentation of the Internet protocols closely resembles an academic research project. The protocols are specified in documents called RFCs. RFCs are published, reviewed, and analyzed by the Internet community.
- #83: Purpose: This figure discusses application-layer protocols. Emphasize: The common network applications today include file transfer, remote login, network management, and e-mail. We focus on TCP/IP in this course for several reasons: TCP/IP is a universally available protocol and you will use it at work. TCP/IP is a useful reference for understanding other protocols, because it includes elements that are representative of other protocols. TCP/IP is important because the router uses it as a configuration tool. The router uses Telnet for remote configuration, TFTP to transfer configuration files and operating system images, and SNMP for network management. Transition: The next section moves down the model to discuss the transport layer.
- #84: Purpose: This figure introduces the protocols used at the transport layer. Emphasize: TCP is one protocol within the protocol suite of TCP/IP. TCP is an acknowledged transport-layer protocol. However, TCP has a large header so there is much overhead. UDP is unacknowledged. By eliminating all of the acknowledgement mechanisms, UDP is fast and efficient. UDP does not divide application data into pieces. Reliability is assumed to be handled by the upper-layer protocols, by a reliable lower-layer protocol, or by an error-tolerant application. UDP does have a smaller header and less overhead.
- #85: Purpose: This figure explains what is contained in a TCP segment. Emphasize: Source Port and Destination Port are the connections to the upper-layer protocol. Sequence and Acknowledgment numbers are the position in the user’s byte stream of this segment. Sequence numbers are used for establishing reliability. HLEN is the header length. It tells us where the data begins. Six bits are reserved for future use. Code Bits distinguish session management messages from data. Window is a term we will come back to in a few slides. For now, consider it to be the size of the receiver’s buffers. Checksum is a cyclic redundancy check (CRC). It verifies that the datagram arrived intact. Urgent Pointer is used to signify urgent data.- To deal with situations where a certain part of a data stream needs to be sent with a higher priority than the rest, TCP incorporates an “urgent” function. When critical data needs to be sent, the application signals this to its TCP layer, which transmits it with the URG bit set in the TCP segment, bypassing any lower-priority data that may have already been queued for transmission Options are used by vendors to enhance their protocol offering. The data portion of the frame contains the upper-layer protocol data.
- #86: Purpose: This figure explains how TCP uses port numbers to connect applications. Emphasize: These port numbers were standardized in RFC 1340. This RFC has been obsoleted by RFC 1700. However, many of the port numbers outlined in RFC 1340 are still being used as standards. It is possible to filter on TCP port numbers. The TCP port number, combined with other information, is what UNIX C language developers call a socket. However, work sockets have different meanings in XNS and Novell, where they are service access point abstractions or programming interfaces rather than service access point identifiers.
- #87: Purpose: This figure continues to explain how TCP uses port numbers. Emphasize: In most cases, the TCP port number on one side of a conversation is the same on the other side. For example, when a file transfer takes place, the software on one host is communicating with a peer application on another host. In this example we see a Telnet (TCP port 23) session. It is possible to have multiple Telnet sessions running simultaneously on a host or router. Telnet selects an unused port number above 1023 to represent the source port for each independent session. Notice that the destination port is still 23. Port numbering is important to understand in order to configure IP extended access lists. The lack of symmetry in port number use is a critical factor in establishing effective security.
- #88: If more than one device is involved, things become more complicated. In the example shown PC-B also has a connection to the server. This connection has a source port number of 2,000 and a destination port number of 23—another telnet connection. This brings up an interesting dilemma. How does the server differentiate between PC-A’s connection that has port numbers 2,000/23 and PC-B’s, which has the same? Actually, the server uses not only the port numbers at the transport layer to multiplex connections, but also the layer-3 addresses of the devices connected to these connections. In this example, notice that PC-A and PC-B have different layer-3 addresses: 1.1.1.1 and 1.1.1.2 respectively.
- #89: Syn – Can I Talk to you? Syn (Can I talk to you?), ACK (Yes) Ack (Yes) Emphasize: In the next segment, host A sends some data. Note that the sequence number of the segment in step 3 is the same as as the ACK in Step 2. This sequence is like two people talking. The first person wants to talk to the second, and says, “I would like to talk with you.” (SYN) The second person responds, “Good. I want to talk with you.” (SYN, ACK) The first person then says, “Fine—let us talk. Here is what I have to say.” (SYN, ACK, DATA) At this point, either side can begin communicating and either side can break the connection. TCP is a peer-to-peer (balanced) communication method (no primary/secondary). Note: This figure explains TCP connection establishment. For more information regarding the three-way handshake in establishing a TCP connection, refer to RFC 793.
- #92: Forward Ack Emphasize: ACK for message 3. (Send ACK 4, Receive ACK 4) This sequence helps to convey the delay associated with a window size of one. Note: TCP acknowledgments are expectational and are sometimes called forward referenced, which means that they refer to the segment they are expecting to receive, not the one just sent. Acknowledgment field sizes can become an issue when transmitting data at FDDI and ATM speeds.
- #93: Layer 4 of 4 Emphasize: Layer 4 shows the acknowledgment number is 12. The sequence and acknowledgment numbers are directional. The slide highlights the communication going in one direction. The sequence and acknowledgments take place with the sender on the right. TCP provides full-duplex communication.
- #94: Forward Ack Delayed ACK Flow Control Another function of the transport layer is to provide optional flow control. Flow control is used to ensure that networking devices don’t send too much information to the destination, overflowing its receiving buffer space, and causing it to drop the sent information. Overflow is not good because the source will have to resend all of the information that was dropped. The transport layer can use two basic flow control methods: Exam Watch The purpose of flow control is to ensure the destination doesn't get overrun by too much information sent by the source. Ready/not ready signals Windowing Ready/not ready signals and windowing are used to implement flow control. Ready/not ready signals are not efficient, causing drops in unnecessary traffic and delays in the transmission of traffic. Windowing addresses these issues. With windowing, a window size is established, which defines the number of segments that can be transferred before waiting for an acknowledgment from the destination.
- #95: Windows size 3 –Delayed Ack
- #100: Purpose: This graphic explains the format of UDP. Emphasize: UDP is simple and efficient but not reliable. The UDP segment format includes a source port, a destination port, a length field, and an optional checksum field. It has no sequencing, acknowledgments, or windowing. Example: TFTP uses a checksum. At the end of the transfer, if the checksum does not match, then the file did not make it. The user is notified and must enter the command again. As a result, the user has become the reliability mechanism. Transition: The next section discusses the network layer of the OSI model and how it corresponds to the TCP/IP Internet layer.
- #102: IP is the main protocol It is connection less IP will carry the data packets Data packets are IP Packets IP
- #103: Version – IP version current 4 TTL – How many HOPS packet can withstand Protocol – to determine whether TCP or UDP
- #104: Purpose: This figure explains the use of the protocol field. Emphasize: Protocol numbers connect, or multiplex, IP to the transport layer. These numbers are standardized in RFC 1700. Cisco uses these numbers in filtering with extended access lists.
- #105: Purpose: This figure explains which messages are ICMP messages. Emphasize: Describe ICMP messages and ping .
- #106: Layer 4 of 4 Emphasize: In layer 4, the bulleted items at the bottom of the slide appear. ARP provides translation between network and data link layers. Discuss why it is necessary to have a mechanism like ARP. Describe ARP operation. Not all protocols use ARP. Some use other methods for address translation. Note: For the message to be transmitted uniquely to a single interface on the multiaccess link, it is necessary to build a frame with the unique MAC address of the interface.
- #107: Layer 4 of 4 Emphasize: In layer 4, the bulleted items appear at the bottom of the slide. RARP is used to boot diskless workstations over a network.
- #110: TK-23-24
- #126: Purpose: This is an introduction slide to the IP addressing section. Emphasize: Stations with internetwork access must have unique addresses.
- #127: Layer 3 of 3 Emphasize: In layer 3, an example of dotted decimal format and binary are displayed. IP address format is dotted decimal. Dotted decimal makes it easy to work with IP addresses. However, in this course we will work with the addresses on the bit level, so we will convert these addresses into binary, make changes to them, and convert them back. The central authority for addresses is the Internet Assigned Numbers Authority (IANA). Note: This most common form of addressing reflects the widely used IP version 4. Faced with the problem of depleting available addresses, Internet Engineering Task Force (IETF) work is under way for a backward-compatible next generation of IP (IPng, also called IP 6). IP 6 will offer expanded routing and addressing capabilities with 128-bit addresses rather than the 32-bit addressing shown on the graphic. Addresses from both IP versions will coexist. Initial occurrences will probably be at locations with address translator software and firewalls.
- #128: Slide 1 of 2 Purpose: This graphic describes the three most common classes of IP address. Emphasize: Discuss classes of addresses. Each address contains information about the network number and the host number of the device. Class A addresses are for very large organizations, Class B addresses are for smaller organizations, and Class C addresses for even smaller ones. As the number of networks grows, classes may eventually be replaced by another addressing mechanism, such as classless interdomain routing (CIDR). RFC 1467, Status of CIDR Deployment in the Internet , presents information about CIDR. RFC 1817, CIDR and Classful Routing , also presents CIDR information.
- #129: Slide 2 of 2 Emphasize: Highlight the fixed values that start each class address. The first octet rule states that when an address falls into a specified range, it belongs to a certain class. Students should soon be able to recognize the address class of any IP address on sight. Note: If time or interest permits, you can use the initial bit patterns in the first octet and show how a class of IP network derives the range of network numbers for that IP address class.
- #130: Purpose: This figure presents an overview of host and network address conventions. Emphasize: In the example, 172.16.0.0 and 10.0.0.0 refer to the wires at each end of the router. Explain how the routing table is used. Entries in the routing table refer to the network only. The router does not know the location of hosts; it knows the location of networks. .
- #133: Purpose: This figure explains how to calculate the number of available hosts in a network. Emphasize: 2 N -2 is the calculation to determine available hosts. N is the number of binary digits in the host field. Subtract 2 because a host cannot be all 0s or 1s. The same principle applies when determining the number of available networks.
- #134: Layer 1 of 2 Purpose: This exercise verifies that the students understand IP address classes, network numbers, and host numbers. Give the students time to list the address class, network, and host number for each IP address in the table. Review the correct answers interactively. The answers are given in the following figure.
- #135: Layer 2 of 2 Purpose: The answers to the exercise are given in the figure. Note: Students can also find the answers to this exercise in the Appendix D, “Answers.”
- #138: Advantages of Subnetting Subnetting is often used to accommodate a divided physical topology or to restrict broadcast traffic on a network.Other advantages of subnetting include improved secu rity (by restricting unauthorized traffic behind routers)and simplified administration (by delegating control of subnets to other departments or administrators). Accommodating Physical Topology Suppose you are designing a campus network with 200 hosts spread over four buildings —Voter Hall,Twilight Hall,Monroe Hall, and Sunderland Hall.You want each of these four buildings to include 50 hosts.If your ISP has allocated to you the Class C network 208.147.66.0,you can use the addresses 208.147.66.1 –208.147.66.254 for your 200 hosts. Restricting Broadcast Traffic A broadcast is a network message sent from a single computer and distributed to all other devices on the same physical network segment. Broadcasts are resource-intensive because they use up network bandwidth and request the attention of every network adapter and processor on the local network segment. Routers block broadcasts and protect networks from becoming overburdened with unnecessary traffic.Because routers also define the logical limits of subnets,subnet ting a network indirectly allows you to limit the propagation of broadcast traffic in that network.
- #139: Purpose: This figure explains what networks look like without subnets. Emphasize: Without subnets, use of network addressing space is inefficient. The Class B network is like a highway with no exits—there is no place to exit, so all of the traffic is in one line.
- #140: Purpose: This figure describes network structure when subnets are used. Emphasize: The host bits of an IP address can be subdivided into a subnetwork section and a host section. The subnetwork section in this example is the full third octet. Point out the difference in the addressing between the previous slide and this slide. A subnetted address space is like a highway with exits. A network device uses a subnet mask to determine what part of the IP address is used for the network, the subnet, and the device ID. A subnet mask is a 32-bit value containing a number of one bits for the network and subnet ID, and a number of zero bits for the host ID. Given its own IP address and subnet mask, a device can determine if an IP packet is destined for 1) a device on its own subnet, 2) a device on a different subnet on its own network, or 3) a device on a different network. A device can determine what class of address the device has been assigned from its own IP address. The subnet mask then tells the device where the boundary is between the subnet ID and the host ID.
- #141: Layer 1 of 2 Purpose: This figure shows what would happen if there were no subnetting. Emphasize: If networks could not be broken down into more granular subnetworks, few networks could exist, each with a capacity for many hosts.
- #142: Layer 1 of 2 Emphasize: By turning on more bits in the mask, we reserve some bits as network information and can use these bits to describe subnetworks. Describe how the router makes use of this technique. Point out that there is more information in the routing table now. Note: As you enter the discussion about subnet masks, a question might arise about whether it is legal to define a discontiguous subnet mask. A discontiguous subnet mask consists of intervening zeros, as in 101111011000, rather than all ones followed by zeros, as in 1111111100000000. The question has two answers. According to RFC 950 that describes IP, a discontiguous subnet mask is legal. However, the hardware expense to produce an interface that supports discontiguous masking is cost prohibitive. Thus in practice it is not supported on most vendors’ equipment, including Cisco. Also, discontiguous masking has no benefit, and it is much more difficult to maintain a network based on this design. Later RFCs make noncontiguous subnet masks illegal because they are incompatible with future addressing schemes such as CIDR.
- #143: Emphasize: Turn on more bits to represent subnets. Compare the default or standard subnet mask with the subnet mask in the slide. The following are the rules for IP addressing: An address is 32 bits, divided into three components: First octet rule bits Network bits (path selection bits) Node bits The first octet rule states that the most significant bit pattern in the first octet determines the class of the address. Path selection bits cannot be all ones or zeros. Certain addresses are reserved. RFC 1918 defines some of those. Prefix or mask one bits are path selection significant; zero bits are host bits and therefore not significant. Use the logical AND to combine the address and mask bits to get the subnet address. The maximum number of available subnets equals 2 prefix bits - 2; the maximum number of available hosts equals 2 32- prefix bits - 2.
- #144: Purpose: This figure explains how subnet masks are converted to decimal addresses. Emphasize: Review binary-to-decimal conversion, bit weighting, and conversion. Explain the logical AND. One possible explanation of the logical AND follows. We will need to be able to perform a logical AND on the binary numbers. Just take two binary numbers and place one above the other. The ones in the bottom are like a pipe—the number above it just drops through. The zeros are like a clogged pipe, so nothing comes out in the answer. Presenting a truth table will help some students understand. You might need to give more than one explanation. Note: You might want to hand out a binary-to-decimal conversion sheet if you have not already done so. We have not included one in the lab section. It is more useful to have one that is on a separate page from the labs.
- #145: Purpose: This graphic explains how routers use addresses that have no subnet mask. Emphasize: Explain how masking works at the bit level. Zero bits mask host information. Note: This is an easy place to lose students. At this point, they need to learn several abstract mathematical concepts before we can show them how to lay out an IP-addressed network. To the novice, these techniques may seem unrelated, making the presentation confusing. To a more experienced audience, these techniques will be familiar.
- #146: Slide 1 of 2 Purpose: This figure shows how the router determines an address when subnetting is used. Emphasize: This example makes a Class B address space look like a collection of Class C address spaces. Now the logical AND allows us to extract the subnet number as well as the assigned network number. An exercise follows that tests the students’ understanding of subnet masks.
- #147: Slide 2 of 2 Purpose: This figure shows how the router determines an address when subnetting is used. Emphasize: This example is different from the previous example in that the the subnet and host are divided within an octet. Transition: An exercise follows that tests the students’ understanding of subnet masks.
- #148: Layer 1 of 2 Purpose: This exercise is for the students to take the given IP addresses and associated subnet masks and perform a logical AND to extract the subnet number. Provide time in class and review the answers after most of the students have finished. The answers are given in the following figure.
- #149: Layer 2 of 2 Purpose: The answers to the exercise are given in the figure. Note: Students can also find the answers to this exercise in the Appendix D, “Answers.”
- #150: Purpose: This figure explains how broadcast addresses work. Emphasize: A range of addresses is needed to allocate address space. A valid range of addresses is between subnet zero and the directed broadcast. The following RFCs provide more information about broadcasts: RFC 919, Broadcasting Internet Datagrams RFC 922, Broadcasting IP Datagrams in the Presence of Subnets Cisco’s support for broadcasts generally complies with these two RFCs. It does not support multisubnet broadcasts that are defined in RFC 922.
- #151: Layer 9 of 9 Emphasize: In layer 9, convert binary back to dotted decimal.
- #152: Purpose: This figure shows an example of a Class B network with a subnet.
- #153: Purpose: This figure explains how to plan subnet numbers. Emphasize: What if this were a Class B address? How many bits would we have for subnetting then? Where do you want to draw the line now? Alternatives to review: Creating the subnet at the octet boundary is easier to work with—more host bits and more subnet bits. Explain that the decision is really a guess on how you think your network will grow—will it have more subnets or more hosts? RFC 1219: Mirroring hedges the subnetting decision by buying time. Do not use mirroring if you intend to use route summarization or variable-length subnet masking (VLSM); they are incompatible with mirroring.
- #154: Purpose: This figure shows an example of a Class C network with a subnet. Emphasize: Contrast the Class C network subnet mask with the previous Class B example.
- #161: Bs = 32 Subnet 192.168.0.96 B/c – 192.168.0.127
- #162: Mask = 248 BS = 8 Nw= 48 B/c - 55
- #163: Mask = 240 BS=16 NW-128 B/c-143
- #164: Mask = 252 BS=4 NW-192 B/c-195
- #165: Mask = 192 BS=64 NW-64 B/c-127
- #166: Mask = 224 BS=32 NW-128 B/c-159
- #177: Mask = 240 BS = 256-240= 16 Network - 172.16.80.0 B/c 172.16.95.255
- #178: Mask = 248 BS = 256-248= 8 Network - 172.16.85.24 B/c 172.16. 85.31
- #179: Mask = 254 BS = 256-254= 2 Network - 172.30.100.0 B/c 172.30.101.255
- #180: Mask = 255 BS = 256-255= 1 Network - 172.20.210.0 B/c 172.20.210.255
- #181: 2x = 128 27=128 Mask 255.255.254.0
- #182: 7 bits to be left from host part 255.255.255.128
- #187: Layer 1 of 2 Emphasize: Have the students calculate the subnet numbers and the broadcast address for each subnet from the given IP addresses and subnet masks.
- #188: Layer 2 of 2 Purpose: The answers to the exercise are given in the figure. Note: Students can also find the answers to this exercise in the Appendix D, “Answers.”
- #189: Stand for Variable length Sub net mask Every subnet will have different SNM based o requirement
- #194: 2 HOST EACH FOR WAN Link = /30 SNM = 255.255.255.252 BS=4 Networks = 192.168.1.4, 8,12 For 12 Hosts Bit needed 4 bits Mask 255.255.255.240 Block Size – 16 Network 192.168.1.16 For 25 hosts 5 bits on host part, so 3 bit on network Mask 224 BS = 32 Network = 192.168.1.32 For 40 hosts bit to be left = 6 Mask 192 BS = 64 Network 192.168.1.64
- #195: Wan 1 – 192.168.1.4/30 Wan 2 – 192.168.1.8/30 WAN3 - 192.168.1.12/30 WAN4 – 192.168.1.16/30 For 5 hosts 192.168.1.24/29 For 8 hosts 192.168.1.32/28 For 15 Hosts 192.168.1.64/27 For 35 Hosts 192.168.1.128/26
- #197: In the networking world route aggregate means combining routes to multiple networks into one. This is also known as route summarization or supernetting. It is normally used to reduce the number of route entries in the routing table by advertising numerous routes into one larger route.