Configuration of mesh topology in cisco packet tracer by Tanjilur RAhman
0 likes4,686 views
This document provides steps for creating a mesh topology network in Cisco Packet Tracer, where every device is connected to every other device. It involves selecting PCs or laptops, switches, and configuring the laptops with valid IP addresses. The final steps show sending a message from Laptop0 to Laptop2 and pinging from Laptop1 to Laptop4, with 0% packet loss, demonstrating the successful creation of the mesh network.
1 of 6
Download to read offline
Configuration of mesh topology in cisco packet tracer by Tanjilur RAhman
- 1. Made by Tanjilur Rahman ID:182482509 City University, Bangladesh Mesh Topology: This is a complicated networking system. Every devices are connected with all devices under this network. Now, We are trying to making a Mesh topology in cisco packet tracer by following this figures shown in bellow… Step 1:
- 2. Step 2: Here, we select the pcs or laptops…
- 3. 3: Now, we select the Switches…
- 4. 4: This is important to configurations of Laptops with valid IP address 5:
- 5. 6: Sending a message from Laptop0 to Laptop2
- 6. Step 7: Pinging from Laptop1 to Laptop 4… There Loses is 0%. So, We Are Success…!!!