Data Structures

Data Structures using C++
Prof. K ADISESHA (Ph. D)

Introduction
Types of Data structures
Linear Data structure
Stacks and Queues
Linked lists
2
Data Structures
Non-Linear Data structure
Learning Objective

Introduction
Prof. K. Adisesha (Ph. D)
3
Data Structures:
Data
➢ Data is a collection of facts, numbers, letters or symbols that the computer process
into meaningful information.
Data structure
➢ Data structure is representation of the logical relationship existing between
individual elements of data.
➢ Data structure is a specialized format for organizing and storing data in memory
that considers not only the elements stored but also their relationship to each other.

Introduction
4
Data Structures:
Data structure affects the design of both structural & functional aspects of a program.
➢ A algorithm is a step by step procedure to solve a particular function.
➢ Program=algorithm + Data Structure

Data Structures
5
Classification of Data Structure:
Data structure are normally divided into two broad categories:
➢ Primitive Data Structure
➢ Non-Primitive Data Structure

Data Structures
6
Primitive Data Structure:
Data structures that are directly operated upon the machine-level instructions are
known as primitive data structures:
➢ There are basic structures and directly operated upon by the machine instructions.
➢ The Data structures that fall in this category are.
❖ Integer
❖ Floating-point number
❖ Character constants
❖ string constants
❖ pointers etc.,

Data Structures
7
Primitive Data Structure:
Data structures that are directly operated upon the machine-level instructions are
known as primitive data structures:
➢ The most commonly used operation on data structure are broadly categorized into
following types:
❖ Create
❖ Selection
❖ Updating
❖ Destroy or Delete

Data Structures
8
Non-Primitive Data Structure:
The Data structures that are derived from the primitive data structures are called Non-
primitive data structure:
➢ There are more sophisticated data structures
➢ The non-primitive data structures emphasize on structuring of a group of homogeneous
(same type) or heterogeneous (different type) data items:
❖ Linear Data structures
❖ Non-Linear Data structures

Data Structures
9
Linear Data structures
Linear Data structures are kind of data structure that has homogeneous elements.
➢ The data structure in which elements are in a sequence and form a liner series.
➢ Linear data structures are very easy to implement, since the memory of the computer is
also organized in a linear fashion.
➢ Some commonly used linear data structures are:
❖ Stack
❖ Queue
❖ Linked Lists

Data Structures
10
Non-Linear Data structures
A Non-Linear Data structures is a data structure in which data item is connected to
several other data items.
➢ Non-Linear data structure may exhibit either a hierarchical relationship or parent child
relationship.
➢ The data elements are not arranged in a sequential structure.
➢ Some commonly used non-linear data structures are:
❖ Trees
❖ Graphs

Data Structures
11
The most commonly used operation on data structure are broadly categorized into
following types:
❖ Traversal
❖ Insertion
❖ Selection
❖ Searching
❖ Sorting
❖ Merging
❖ Destroy or Delete

Data Structures
12
Differences between Data Structure:
The most commonly used differences between on data structure are broadly categorized
into following types:
➢ A primitive data structure is generally a basic structure that is usually built into the
language, such as an integer, a float.
➢ A non-primitive data structure is built out of primitive data structures linked together
in meaningful ways, such as a or a linked-list, binary search tree, AVL Tree, graph etc.

Arrays
13
Arrays:
An array is defined as a set of finite number of homogeneous elements or same data
items:
➢ Declaration of array is as follows:
➢ Syntax: Datatype Array_Name [Size];
➢ Example: int arr[10];
✓ Where int specifies the data type or type of elements arrays stores.
✓ “arr” is the name of array & the number specified inside the square brackets is the
number of elements an array can store, this is also called sized or length of array.

Arrays
14
Arrays:
Represent a Linear Array in memory:
➢ The elements of linear array are stored in consecutive memory locations.
➢ It is shown below:
int A[5]={23, 4, 6, 15, 5, 7}

Arrays
15
Calculating the length of the array:
The elements of array will always be stored in the consecutive (continues) memory
location.
➢ The number of elements that can be stored in an array, that is the size of array or its length is
given by the following equation:
o A[n] is the array size or length of n elements.
o The length of the array can be calculated by:
L = UB – LB + 1
o To Calculate the address of any element in array:
Loc(A[P])=Base(A)+W(P-LB)
o Here, UB is the largest Index and LB is the smallest index
➢ Example: If an array A has values 10, 20, 30, 40, 50, stored in location 0,1, 2, 3, 4 the UB = 4
and LB=0 Size of the array L = 4 – 0 + 1 = 5

Arrays
16
Types of Arrays:
The elements of array will always be stored in the consecutive (continues) memory
location. The various types of Arrays are:
➢ Single Dimension Array:
❖ Array with one subscript
❖ Ex: int A[i];
➢ Two Dimension Array
❖ Array with two subscripts (Rows and Column)
❖ Ex: int A[i][j];
➢ Multi Dimension Array:
❖ Array with Multiple subscripts
❖ Ex: int A[i][j]..[n];

Arrays
17
Basic operations of Arrays:
Some common operation performed on array are:
❖ Traversing
❖ Searching
❖ Insertion
❖ Deletion
❖ Sorting
❖ Merging

Arrays
18
Traversing Arrays:
Traversing: It is used to access each data item exactly once so that it can be processed:
➢ We have linear array A as below:
1 2 3 4 5
10 20 30 40 50
➢ Here we will start from beginning and will go till last element and during this process
we will access value of each element exactly once as below:
A [0] = 10
A [1] = 20
A [2] = 30
A [3] = 40
A [4] = 50

Arrays
19
Program:To find the frequency of presence element in the given array:

Arrays
20
Insertion into Array:
Insertion: It is used to add a new data item in the given collection of data items:
➢ We have linear array A as below:
1 2 3 4 5
10 20 50 30 15
➢ New element to be inserted is 100 and location for insertion is 3.
➢ So shift the elements from 5th location to 3rd location downwards by 1 place.
➢ And then insert 100 at 3rd location

Arrays
21
➢ Insertion 100 into Array
at Pos=3
A [0] = 10
A [1] = 20
A [2] = 50
A [3] = 30
A [4] = 15

Arrays
22
Insertion into Array: Add a new data item in the given array of data:
A [0] = 10
A [1] = 20
A [2] = 50
A [3] = 30
A [4] = 15

Arrays
23
Deletion from Array:
Deletion: It is used to delete an existing data item from the given collection of data
items:
➢ Deletion 30 from Array
at Pos 3
A [0] = 10
A [1] = 20
A [2] = 30
A [3] = 40
A [4] = 50

Arrays
24
Deletion from Array:
A [0] = 10
A [1] = 20
A [2] = 30
A [3] = 40
A [4] = 50

Arrays
25
Searching in Arrays:
Searching: It is used to find out the location of the data item if it exists in the given
collection of data items:
➢ E.g. We have linear array A as below:
1 2 3 4 5
10 20 50 30 35
➢ Suppose item to be searched is 35. We will start from beginning and will compare 35
with each element.
➢ This process will continue until element is found or array is finished.
➢ Types of searching Algorithms:
❖ Linear searching
❖ Binary Searching

Arrays
26
Linear search:
Linear Searching: Also called Sequential Searching.
➢ It is used to find out the location of the data item if it exists in the given collection of
data items.
➢ Example Searching element 33 from the array of elements:

Arrays
27
Linear search:
Linear Searching: Also called Sequential Searching.

Arrays
28
Binary Searching:
The binary search algorithm can be used with
only sorted list of elements.
➢ Binary Search first divides a large array into
two smaller sub-arrays and then recursively
operate the sub-arrays.
➢ Binary Search basically reduces the search
space to half at each step

Arrays
29
Binary Searching:
The binary search algorithm can be used with only sorted list of elements.
➢ Example: Searching the element 57 from the array of elements

Arrays
30
Binary Searching:
➢ Example:

Arrays
31
Binary Searching:

Arrays
32
Difference in Searching:

Arrays
33
Difference in Searching:

Arrays
34
Sorting in Arrays:
A Sorting Algorithm is used to rearrange a given array or list elements according to a
comparison operator on the elements:
➢ The comparison operator is used to decide the new order of element in the respective
data structure.
➢ Types of Sorting Algorithms are:
❖ Bubble Sort
❖ Insertion Sort
❖ Selection Sort
❖ Merge Sort
❖ Quick Sort
❖ Heap Sort
❖ Radix Sort
❖ Bucket Sort
❖ Shell Sort

Arrays
35
Bubble Sort in Arrays:
Bubble Sort is the simplest sorting algorithm that works by repeatedly swapping the
adjacent elements if they are in wrong order.

Arrays
36
Insertion Sorting:
Insertion sort is a simple sorting algorithm that builds the final sorted array (or list)
one item at a time.
➢ This is an in-place comparison-based sorting algorithm. Here, a sub-list is maintained
which is always sorted.

Arrays
37
Insertion Sorting:
This is an in-place comparison-based sorting algorithm. Here, a sub-list is maintained
➢ This is an in-place comparison-based sorting algorithm. Here, a sub-list is maintained

Arrays
38
Insertion Sorting: ALGORITHM: Insertion Sort (A, N) A is an array with N unsorted elements.
◼ Step 1: for I=1 to N-1
◼ Step 2: J = I
While(J >= 1)
if ( A[J] < A[J-1] ) then
Temp = A[J];
A[J] = A[J-1];
A[J-1] = Temp;
[End if]
J = J-1
[End of While loop]
[End of For loop]
◼ Step 3: Exit

Arrays
39
Selection Sort:

Arrays
40
Selection Sort:

Arrays
41
Merging from Array:
Merging: It is used to combine the data items of two sorted files into single file in the
sorted form.
➢ We have sorted linear array A as below:
1 2 3 4 5 6
10 40 50 80 95 100
➢ And sorted linear array B as below:
1 2 3 4
20 35 45 90
➢ After merging merged array C is as below:
1 2 3 4 5 6 7 8 9 10
10 20 35 40 45 50 80 90 95 100

Arrays
42
Two dimensional array:
A two dimensional array is a collection of elements and each element is identified by a
pair of subscripts. ( A[3] [3] ).
➢ The elements are stored in continuous memory locations.
➢ The elements of two-dimensional array as rows and columns.
➢ The number of rows and columns in a matrix is called as the order of the matrix and
denoted as MxN.
➢ The number of elements can be obtained by multiplying number of rows and number of
columns. A[0] A[1] A[2]
A[0] 10 20 30
A[1] 40 50 60
A[2] 70 80 90

Arrays
43
Representation of Two Dimensional Array:
A two dimensional array is a collection of elements and each element is identified by a
pair of subscripts. ( A[m] [n] )
➢ A is the array of order m x n. To store m*n number of elements, we need m*n memory
locations.
➢ The elements should be in contiguous memory locations.
➢ There are two methods:
❖ Row-major method
❖ Column-major method
A[0] A[1] A[2]
A[0] 10 20 30
A[1] 40 50 60
A[2] 70 80 90

Arrays
44
Representation of Two Dimensional Array:
Row-Major Method:
➢ All the first-row elements are stored in sequential
memory locations and then all the second-row
elements are stored and so on. Ex: A[Row][Col]
Column-Major Method:
➢ All the first column elements are stored in sequential
memory locations and then all the second-column
elements are stored and so on. Ex: A [Col][Row]
1000 10 A[0][0]
1002 20 A[0][1]
1004 30 A[0][2]
1006 40 A[1][0]
1008 50 A[1][1]
1010 60 A[1][2]
1012 70 A[2][0]
1014 80 A[2][1]
1016 90 A[2][2]
1000 10 A[0][0]
1002 40 A[1][0]
1004 70 A[2][0]
1006 20 A[0][1]
1008 50 A[1][1]
1010 80 A[2][1]
1012 30 A[0][2]
1014 60 A[1][2]
1016 90 A[2][2]
Row-Major Method
Col-Major Method

Arrays
45
Calculating the length of the 2D-Array
:A two dimensional array is a collection of elements and each element is identified by a
➢ The size of array or its length is given by the following equation:
A[i][j] is the array size or length of m*n elements.
➢ To Calculate the address of i*j th element in array:
❖ Row-Major Method: Loc(A[i][j])=Base(A)+W[n(i-LB)+(j-LB)]
❖ Col-Major Method: Loc(A[i][j])=Base(A)+W[(i-LB)+m(j-LB)]
Here, W is the number of words per memory location and LB is the smallest index

Arrays
46
Advantages of Array
➢ It is used to represent multiple data items of same type by using single name.
➢ It can be used to implement other data structures like linked lists, stacks, queues, tree,
graphs etc.
➢ Two-dimensional arrays are used to represent matrices.
➢ Many databases include one-dimensional arrays whose elements are records.

Arrays
47
Disadvantages of Array
➢ We must know in advance the how many elements are to be stored in array.
➢ Array is static structure. It means that array is of fixed size. The memory which is
allocated to array cannot be increased or decreased.
➢ Array is fixed size; if we allocate more memory than requirement then the memory
space will be wasted.
➢ The elements of array are stored in consecutive memory locations. So insertion and
deletion are very difficult and time consuming.

Stack
48
Stack:
Stack is a linear data structure which follows a particular order in which the operations
are performed
➢ Insertion of element into stack is called PUSH and deletion of element from stack is
called POP.
➢ The order may be LIFO(Last In First Out) or FILO(First In Last Out).

Stack
49
Stack:
Memory Representation of Stack
➢ The stack can be implemented into two ways:
❖ Using arrays (Static implementation)
❖ Using pointer (Dynamic

Stack
50
Operation on Stacks:
The various operation performed on Stacks are:
➢ Stack( ): It creates a new stack that is empty. It needs no parameter and returns an
empty stack.
➢ push(item): It adds a new item to the top of the stack.
➢ pop( ): It removes the top item from the stack.
➢ peek( ): It returns the top item from the stack but does not remove it.
➢ isEmpty( ): It tests whether the stack is empty.
➢ size( ): It returns the number of items on the stack.

Stack
51
Stack Conditions:
The various operation performed on Stacks depend on the following conditions:

Stack
52
PUSH Operation:
The process of adding one element or item to the stack is represented by an operation
called as the PUSH operation:
ALGORITHM:
PUSH (STACK, TOP, SIZE, ITEM)
STACK is the array with N elements. TOP is the pointer to the top of the element of the array. ITEM to be inserted.
Step 1: if TOP = N then [Check Overflow]
PRINT “ STACK is Full or Overflow”
Exit
[End if]
Step 2: TOP = TOP + 1 [Increment the TOP]
Step 3: STACK[TOP] = ITEM [Insert the ITEM]
Step 4: Return

Stack
53
POP Operation:
The process of deleting one element or item from the stack is represented by an
operation called as the POP operation.
When elements are removed continuously from a stack, it shrinks at same end i.e., top:

ALGORITHM: POP (STACK, TOP, ITEM)
STACK is the array with N elements. TOP is the pointer to the top of the element of the array. ITEM
to be DELETED.
Step 1: if TOP = 0 then [Check Underflow]
PRINT “ STACK is Empty or Underflow”
Exit
[End if]
Step 2: ITEM = STACK[TOP] [copy the TOP Element]
Step 3: TOP = TOP - 1 [Decrement the TOP]
Step 4: Return
Stack
54
POP Operation:
The process of deleting one element or item from the stack is represented by an
operation called as the POP operation.

Stack
55
PEEK Operation:
The process of returning the top item from the stack but does not remove it called as the
PEEK operation.
ALGORITHM: PEEK (STACK, TOP)
STACK is the array with N elements. TOP is the pointer to the top of the element of the
array.
Step 1: if TOP = NULL then [Check Underflow]
PRINT “ STACK is Empty or Underflow”
Exit
[End if]
Step 2: Return (STACK[TOP] [Return the top element of the stack]
Step 3:Exit

Stack
56
Application of Stacks:
➢ It is used to reverse a word. You push a given word to stack – letter by letter and then pop letter from
the stack.
➢ “Undo” mechanism in text editor.
➢ Backtracking: This is a process when you need to access the most recent data element in a series of
elements. Once you reach a dead end, you must backtrack.
➢ Language Processing: Compiler’ syntax check for matching braces in implemented by using stack.
➢ Data Conversion of decimal number to binary.
➢ To solve tower of Hanoi.
➢ Conversion of infix expression into prefix and postfix.
➢ To sort elements using Quick sort
➢ Runtime memory management.

An expression is a combination of operands and operators that after evaluation results
in a single value.
◼ Operand consists of constants and variables.
◼ Operators consists of {, +, -, *, /, ), ] etc.
➢ Expression can be
❖ Infix Expression: If an operator is in between two operands, it is called infix expression.
✓ Example: a + b, where a and b are operands and + is an operator.
❖ Postfix Expression: If an operator follows the two operands, it is called postfix expression.
✓ Example: ab +
❖ Prefix Expression: an operator precedes the two operands, it is called prefix expression.
✓ Example: +ab
Stack
57
Arithmetic Expression:

Stack
58
Arithmetic Expression:

Queue
59
Queue:
A queue is an ordered collection of items where an item is inserted at one end called the
“rear” and an existing item is removed at the other end, called the “front”.
➢ Queue is also called as FIFO list i.e. First-In First-Out.
➢ In the queue only two operations are allowed enqueue and dequeue.
➢ Enqueue means to insert an item into back of the queue.
➢ Dequeue means removing the front item.The people standing in a railway reservation
row are an example of queue.

Queue
60
Queue:
A queue is an ordered collection of items where an item is inserted at one end called the
“rear” and an existing item is removed at the other end, called the “front”.

Queue
61
Memory Representation of Queue:
The queue can be implemented into two ways:
➢ Using arrays (Static implementation)
➢ Using pointer (Dynamic

Queue
62
Memory Representation of Queue:
Memory Representation of a queue using array:
➢ Queue is represented in memory using linear array.
➢ Let QUEUE is a array, two pointer variables called FRONT and REAR are
maintained.
➢ The pointer variable FRONT contains the location of the element to be removed or
deleted.
➢ The pointer variable REAR contains location of the last element inserted.
➢ The condition FRONT = NULL indicates that queue is empty.
➢ The condition REAR = N-1 indicates that queue is full.

Queue
63
Types of Queues
:Queue can be of four types:
➢ Simple Queue
➢ Circular Queue
➢ Priority Queue
➢ De-queue ( Double Ended Queue)

Queue
64
Types of Queues
:Simple Queue:
➢ Simple Queue: In simple queue insertion occurs at the rear end of the list and
deletion occurs at the front end of the list.

Queue
65
Types of Queues
:Circular Queue:
➢ Circular Queue: A circular queue is a queue in which all nodes are treated as circular
such that the last node follows the first node.

Queue
66
Types of Queues
:Priority Queue:
➢ A priority queue is a queue that contains items that have some present priority. An
element can be inserted or removed from any position depending upon some priority.

Queue
67
Types of Queues
:Dequeue Queue:
➢ Dequeue: It is a queue in which insertion and deletion takes place at the both ends.

Queue
68
Operation on Queues
:The various operation performed on Queue are :
➢ Queue( ): It creates a new queue that is empty.
➢ enqueue(item): It adds a new item to the rear of the queue.
➢ dequeue( ): It removes the front item from the queue.
➢ isEmpty( ): It tests to see whether the queue is empty.
➢ size( ): It returns the number of items in the queue.

Queue
69
Queue Insertion Operation (ENQUEUE):
ALGORITHM: ENQUEUE (QUEUE, REAR, FRONT, ITEM)
QUEUE is the array with N elements. FRONT is the pointer that contains the location of the element to be deleted
and REAR contains the location of the inserted element. ITEM is the element to be inserted.
Step 1: if REAR = N-1 then [Check Overflow] Front Rear
PRINT “QUEUE is Full or Overflow”
Exit
[End if]
Step 2: if FRONT = NULL then [Check Whether Queue is empty]
FRONT = -1
REAR = -1
else
REAR = REAR + 1 [Increment REAR Pointer]
Step 3: QUEUE[REAR] = ITEM [Copy ITEM to REAR position]
Step 4: Return

Queue
70
Queue Deletion Operation (DEQUEUE):
 ALGORITHM: DEQUEUE (QUEUE, REAR, FRONT, ITEM)
QUEUE is the array with N elements. FRONT is the pointer that contains the location of the element to be deleted and REAR
contains the location of the inserted element. ITEM is the element to be inserted.
 Step 1: if FRONT = NULL then [Check Whether Queue is empty] Front Rear
 PRINT “QUEUE is Empty or Underflow”
 Exit
 [End if]
 Step 2: ITEM = QUEUE[FRONT]
 Step 3: if FRONT = REAR then [if QUEUE has only one element]
 FRONT = NULL
 REAR = NULL
 else
 FRONT = FRONT + 1 [Increment FRONT pointer]
 Step 4: Return

Queue
71
Application of Queue:
➢ Simulation
➢ Various features of Operating system
➢ Multi-programming platform systems.
➢ Different types of scheduling algorithms
➢ Round robin technique algorithms
➢ Printer server routines
➢ Various application software’s is also based on queue data structure.

Lists
72
Lists (linked list):
A lists (Linear linked list) can be defined as a collection of variable number of
data items called nodes.
➢ Lists are the most commonly used non-primitive data structures.
➢ Each nodes is divided into two parts:
❖ The first part contains the information of the element.
❖ The second part contains the memory address of the next node in the list.
Also called Link part.

Lists
73
Lists (linked list):
Types of linked lists:
➢ Single linked list
➢ Doubly linked list
➢ Single circular linked list
➢ Doubly circular linked list

Lists
74
Single linked list:
The link field of the last node contains the memory address of the first node,
such a linked list is called circular linked list:
❖ The information field contains the data of that node.
❖ The link field contains the memory address of the next node.
❖ The last link field contains the memory address as null ().
➢ There is only one link field in each node, the linked list is called singly linked
list.

Lists
75
Single circular linked list:
A singly linked list contains two fields in each node - an information field and
the linked field:
❖ The information field contains the data of that node.
❖ The link field contains the memory address of the next node
❖ The last link field contains the memory address of the first node.
➢ In a circular linked list every node is accessible from a given node.

Lists
76
Doubly linked list:
It is a linked list in which each node is points both to the next node and also
to the previous node:
➢ In doubly linked list each node contains three parts:
❖ FORW : It is a pointer field that contains the address of the next node
❖ BACK: It is a pointer field that contains the address of the previous node.
❖ INFO: It contains the actual data.
➢ In the first node, if BACK contains NULL, it indicated that it is the first node in
the list.
➢ The in which FORW contains, NULL indicates that the node is the last node.

Lists
77
Doubly circular linked list:
It is a linked list in which each node is points both to the next node and also to
the previous node:
➢ In doubly linked list each node contains three parts:
❖ FORW : It is a pointer field that contains the address of the next node
❖ BACK: It is a pointer field that contains the address of the previous node.
❖ INFO: It contains the actual data.

Lists
78
Operation on Linked List:
The operation that are performed on linked lists are:
➢ Creating a linked list
➢ Traversing a linked list
➢ Inserting an item into a linked list.
➢ Deleting an item from the linked list.
➢ Searching an item in the linked list
➢ Merging two or more linked lists.

Lists
79
Creating a linked list:
The nodes of a linked list can be created by the following structure declaration:
struct Node
{
int information;
struct Node *link;
}*node1, *node2;
➢ Here info is the information field and link is the link field.
➢ The link field contains a pointer variable that refers the same node structure. Such a
reference is called as Self addressing pointer.

Lists
80
Operator new and delete:
The nodes of a linked list can be created by the following structure declaration:
➢ Operators new allocate memory space
➢ Operators new [ ] allocates memory space for array.
➢ Operators delete deallocate memory space.
➢ Operators delete [ ] deallocate memory space for array.
struct Node
{
int information;
struct Node *link;
}*node1, *node2;

81
Traversing is the process of accessing each node of the linked list exactly once to
perform some operation.
ALGORITHM: TRAVERS (START, P)
START contains the address of the first node. Another pointer p is temporarily used to visit all the nodes
from the beginning to the end of the linked list.
Step 1: P = START
Step 2: while P != NULL
Step 3: PROCESS data (P) [Fetch the data]
Step 4: P = link(P) [Advance P to next node]
Step 5: End of while
Step 6: Return
Traversing a linked list

82
➢ Inserting a node at the beginning of the linked list
➢ Inserting a node at the given position.
➢ Inserting a node at the end of the linked list.
Lists
Inserting a node into the linked list:

83
Lists
Inserting node at Front:
Inserting a node at the beginning of the linked list
1. Create a node.
2. Fill data into the data field of the new node.
3. Mark its pointer field as NULL
4. Attach this newly created node to START
5. Make the new node as the START node.

84
Lists
Inserting node at Front:
Inserting a node at the beginning of the linked list
ALGORITHM: INS_BEG (START, P) START contains the address of the first node.
Step 1: P new Node;
Step 2: data(P) num;
Step 3: link(P) START
Step 4: START P
Step 5: Return

85
Lists
Inserting node at End:
Inserting a node at the End of the linked list
1. Create a node.
2. Fill data into the data field of the new node.
3. Mark its pointer field as NULL
4. Attach this newly created node to Last
5. Make the new node as the Last node.

ALGORITHM: INS_END (START, P)
START contains the address of the first node.
Step 1: START
Step 2: P START [identify the last node]
while P!= null
P next (P)
End while
Step 3: N new Node;
Step 4: data(N) item;
Step 5: link(N) null
Step 6: link(P) N
Step 7: Return
86
Inserting node at End

87
Inserting node at a given Position
ALGORITHM: INS_POS (START, P1, P2)
START contains the address of the first node. P2 is new node
Step 1: START
Step 2: P1 START [Initialize node]
Count 0
Step 3: while P!= null
count count+1
P1 next (P1)
End while
Step 4: if (POS=1)
Call function INS_BEG( )
else if (POS=Count +1)
Call function INS_END( )
else if (POS<=Count)
P1 Start
For(i=1; i<=pos; i++)
P1 next(P1);
end for
[create] P2 new node
data(P2) item;
link(P2) link(P1)
link(P1) P2
else
PRINT “Invalid position”
Step 5: Return

88
Deleting an item from the linked list:
➢ Deletion of the first node
➢ Deletion of the last node
➢ Deletion of the node at the give position.
Deleting an node
Deleting an node:

89
Deleting an node
Deletion of the first node:
This algorithm first copies data in the first node to a variable and delete the first node
of the linked list.
ALGORITHM: DEL_BEG(P, START) This used pointers P
Step 1: START
Step 2: P START;
Step 3: PRINT data(P)
Step 4: START Link(P)
Step 5: Free(P)
Step 6: STOP

90
Deleting an node
Deleting node from end:

ALGORITHM: DEL_END (P1, P2, START) This used two pointers P1 and P2. Pointer P2 is used
to traverse the linked list and pointer P1 keeps the location of the previous node of P2.
Step 1: START
Step 2: P2 START;
Step 3: while ( link(P2) ! = NULL)
P1 P2
P2 link(P2)
While end
Step 4: PRINT data(p2)
Step 5: link(P1) NULL
Free(P2)
Step 6: STOP
91
Deleting an node
Deleting node from end:

Step 1: START
Step 2: P1 START [Initialize node]
Count 0
Step 3: while P!= null
count count+1
P1 next (P1)
End while
Step 4: if (POS=1)
Call function DEL_BEG( )
else if (POS=Count)
Call function DEL_END( )
else if (POS<=Count)
P2 Start
For(i=1; i<=pos; i++)
P1 P2
P2 link(P2)
end for
PRINT data(P2)
link(P1) link( P2)
free(P2)
End if
Step 5: Return
92
Deleting node at a given Position
ALGORITHM: DEL_POS (START, P1, P2)
START contains the address of the first node. P2 is DEL-node

93
Non-Linear Data structures:
A Non-Linear Data structures is a data structure in which data item is
connected to several other data items:
➢ The data items in non-linear data structure represent hierarchical relationship.
➢ Each data item is called node.
➢ The different non-linear data structures are
❖ Trees
❖ Graphs.

94
Trees:
A tree is a data structure consisting of nodes organized as a hierarchy:
➢ Tree is a hierarchical data structure which stores the information naturally in the form
of hierarchy style.
➢ It is a non-linear data structure compared to arrays, linked lists, stack and queue.
➢ It represents the nodes connected by edges.

95
Terminology of a Tree:

96
Binary Tree:
A binary tree is an ordered tree in which each internal node can have maximum
of two child nodes connected to it:
➢ A binary tree consists of:
❖ A node ( called the root node)
❖ Left and right sub trees.
➢ A Complete binary tree is a binary tree in which each leaf is at the same distance from
the root i.e. all the nodes have maximum two subtrees.
Binary tree using array represents a node which is
numbered sequentially level by level from left to
right. Even empty nodes are numbered.

97
Graph:
Graph is a mathematical non-linear data structure capable of representing many
kind of physical structures:
➢ A graph is a set of vertices and edges which connect them.
➢ A graph is a collection of nodes called vertices and the connection between them
called edges.
➢ Definition: A graph G(V,E) is a set of vertices V and a set of edges E.

98
Graph:
Graph is a mathematical non-linear data structure capable of representing many
kind of physical structures:
➢ An edge connects a pair of vertices and many have weight such as length, cost and
another measuring instrument for according the graph.
➢ Vertices on the graph are shown as point or circles and edges are drawn as arcs or line
segment

99
Graph:
Types of Graphs:
❖ Directed graph
❖ Undirected graph
❖ Simple graph
❖ Weighted graph
❖ Connected graph
❖ Non-connected graph

Data structures
100
Thank you:

Data Structures

More Related Content

What's hot (20)

Similar to Data Structures (20)

More from Prof. Dr. K. Adisesha (20)

Recently uploaded (20)

Data Structures