Dräger X-am 2500 Portable Gas Detector - Spec Sheet
0 likes1,711 views
The document describes the Dräger X-am 2500 multi-gas monitor for personal protection. It has durable electrochemical sensors for gases like CO, H2S, O2, SO2 and NO2 that provide long service life and low operating costs. The monitor is robust, water resistant, has reliable power supply options, and maintenance is fast and inexpensive with equipment like the Dräger X-dock station. It is designed for maximum safety in hazardous areas.
Dräger X-am 2500 Portable Gas Detector - Spec Sheet
- 1. DURABLE ELECTROCHEMICAL SENSORS Fully developed, high performance Dräger sensors in an extra small format for CO, H2S, O2, SO2 and NO2 gases enable safe use in industry, mining and in refineries. The impressive hydrogen sulphide sensor has a high resolution, so it can reliably measure even very low workplace limits. The non-consumptive and lead-free sensor for oxygen is characterized by an especially long service life of more than 5 years. Our CO and H2S sensors also have this long service life expectation, so they contribute to especially low operating costs. POISON RESISTANT EX SENSOR The innovative, catalytic Ex sensor is im- pressive due to its high resistance to silicone and hydrogen sulphide. Together with the high degree of drift stability, this resistance enables an extraordinarily long service life of more than 4 years. Its high sensitivity with regard to flammable gases and vapours is confirmed by technical approval for measu- ring according to IEC/EN 60079-29-1 from methane to nonane. This approval also demonstrates the suitability of this instrument for use in refineries and in the chemical industry as well. MAXIMUM SAFETY The Dräger X-am 2500 has Ex approval for zone 0, so it is clearly designed for very high user safety in areas subject to explosion hazard. The functional design ensures that gas can enter from above and from the side – even if the instrument is inside a pocket or if the front gas entry is accidentally covered. MAINTENANCE: FAST, EASY, INEXPENSIVE From functional test to complete docu- mentation, users have access to practical solutions that provide safety for implemen- tation at any time. The Dräger Bump Test Station, which does not require a local power source, and the automatic Dräger X-dock testing and calibration station for comprehensive equipment management are ideal system additions that save time and effort. Together with the Dräger X-dock, the high quality Dräger sensors enable quick bump tests of 8 to 15 seconds1) with very low gas consumption. This signi- ficantly reduces your equipment operating costs. The Dräger X-am 2500® was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O2, CO, NO2, SO2 and H2S. Reliable and fully mature measuring technology, durable sensors and easy handling guarantee a high degree of safety with extremely low operating costs. Dräger X-am® 2500 Multi-Gas Monitor Dräger X-am® 2500 Robust 1 to 4 gas detector for personal protection. D-59025-2012 ST-7317-2005 1) With standard sensors: CH4, O2, CO, H2S Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.heattracing.co.uk www.thorneanderrick.co.uk
- 2. ST-2432-2003 02 | DRÄGER X-AM® 2500 DIFFUSION OR PUMP For clearance measurements for tanks and shafts or when searching for leaks, an optional external pump with a hose up to 30 m long is the optimum solution. When the measuring instrument is inserted, the pump function starts automatically. The switch from diffusion to pump operation can be handled quickly and easily without tools or screws. ERGONOMIC AND ROBUST Thanks to its low weight and ergonomic design, the Dräger X-am 2500 offers a high degree of wearing comfort. The practical RELIABLE POWER SUPPLY The Dräger X-am 2500 can operate with either alkaline batteries or with recharge- able NiMH batteries. This enables a reliab- le power supply for more than 12 hours, and with the high capacity battery pack more than 13 hours. Depending on the requirements, the batteries can be charged either in the workshop or in a vehicle. Operating time without Ex sensor is typi- cally more than 250 hours. Dräger X-am® 2500 Efficient maintenance and comprehensive equip- ment management with the optional Dräger X-dock testing and calibration station. D-52864-2012 Robust design Water and dust resistant in acc. with IP 67. Dräger X-am® 2500 Flexible with external pump for clearance measurements. ST-9554-2007 DRÄGER X-AM® 2500 Safe gas entry Gas entry from 2 sides. Visual alarm Alarm visible across 360°. Crocodile clip Secure attachment. Dräger sensors Quick, precise, long service life. Large display All values at a glance. Dräger X-am® 2500 Reliable personal protection, e.g. in confined space entry. ST-1094-2008 two button control panel and easy menu navigation allow the instrument to be used intuitively, despite its comprehensive functionality. The integrated protective rubber coating and sensors that are not sensitive to shock provide additional safe- ty in case of impacts or vibrations. More- over, the Dräger X-am 2500 is not sensitive to electromagnetic radiation, e.g. from wireless devices. The Dräger X-am 2500 is water and dust resistant in accordance with protection class IP 67, so full func- tionality is guaranteed even if it falls into the water.
- 3. DRÄGER X-AM® 2500 | 03 ORDERING INFORMATION DESIGNATION ORDER NO. Dräger X-am® 2500 Available in various versions. Cannot be modified later with other sensors. Includes calibration certificate. No power supply included. Dräger X-am® 2500 EX1) 83 23 910 Dräger X-am® 2500 Ex, O2 1) 83 23 912 Dräger X-am® 2500 Ex, O2, H2S-LC1) 83 23 914 Dräger X-am® 2500 Ex, O2, CO1) 83 23 916 Dräger X-am® 2500 Ex, O2, H2S-LC, CO1) 83 23 918 Dräger X-am® 2500 Flex 1) 83 23 900 Available in various versions. Can be modified later with other sensors. Includes calibration certificate. No power supply included. Dräger X-am® 2500 Ex, O2, CO, H2S-LC Dräger X-am® 2500 Ex, O2, CO Dräger X-am® 2500 Ex, O2, H2S-LC Dräger X-am® 2500 Ex, O2 Dräger X-am® 2500 Ex Dräger X-am® 2500 O2, CO, H2S-LC Dräger X-am® 2500 O2, CO Dräger X-am® 2500 O2, H2S-LC Dräger X-am® 2500 Ex, O2, CO, NO2 Dräger X-am® 2500 Ex, O2, H2S-LC, SO2 Power supply units NiMH power pack T4 with charging module and PSU (complete set) 83 18 785 NiMH power pack T4 83 18 704 NiMH HC power pack T4 with charging module and PSU (complete set) 83 22 785 NiMH HC power pack T4 83 22 244 Alkaline power pack (w/o batteries) 83 22 237 Alkaline batteries T4 (2 pcs.) for power pack 83 22 237 83 22 240 Charging accessories Charging module 83 18 639 Charging kit consisting of a charging module and a single charger (worldwide) 83 20 333 Power pack with power cord (worldwide) for multiple charging modules (max. 20) 83 15 805 Single charger (worldwide) for multiple charging modules (max. 5) 83 16 994 Single charger (worldwide) for multiple charging modules (max. 2) 83 15 635 Vehicle charging cable 12V/24V for charging module 45 30 057 Vehicle mounting kit for a Dräger X-am 1/2/5x00 charging module 83 18 779 Pump accessories Dräger pump X-am 125, external pump 83 19 400 Manual pump adapter 83 19 195 Confined Space Entry Kit with external pump and 3 m Viton hose 83 19 399 Empty case with room for X-am® 1/2/5x00, charging accessories, probe, gas cylinder, pump, 3 m hose, etc. 83 20 467 Calibration accessories Calibration cradle for Dräger X-am® 1/2/5x00 83 18 752 Dräger X-dock 5300 for Dräger X-am® 1/2/5x00 83 21 880 Other versions of Dräger X-dock by request Dräger Bump Test Station for Dräger X-am® 1/2/5x00 (w/o gas cylinder) 83 19 131 Dräger Bump Test Station for Dräger X-am® 1/2/5x00, incl. gas cylinder 58L (gas and concentration can be selected) 83 19 130 Nonane tester for Dräger X-am® 1/2/5x00 83 20 080 Communication Accessories Dräger GasVision 83 14 034 Dräger CC-Vision Freeware USB DIRA with USB cable, IR communication adapter to USB 83 17 409
- 4. TECHNICAL DATA Dimensions (W x H x D) 48 x 130 x 44 mm Weight 220 - 250 g Ambient conditions Temperature -20 to +50 °C Pressure 700 to 1300 mbar Relative humidity 10 to 95 % r.h. Protection class IP 67 Alarms Visual 360 ° Audible Multi-tone > 90dB at 30cm Vibration Operating times > 12 h with alkaline and NiMH, > 13 h with NiMH HC, > 250 h w/o Ex sensor with alkaline batteries Charging time < 4 h Datalogger Retrievable using an infrared interface > 1000 h with 4 gases at a recording interval of 1 value per minute Approvals ATEX I M1 Ex ia I Ma, II 1G Ex ia IIC T3 Ga, I M2 Ex d ia I Mb, II 2G Ex d ia IIC T4/T3 Gb Performance approval to: EN 50104 (2002)+A1(2004) O2 EN 45544 CO & H2S EN 60079-29-1:2007 Methane to nonane EN 50271:2001 Software and documentation CSA (Canada & USA) Class I Div. 1 Group A, B, C, D T.-Code T4/T3 A/Ex ia IIC T3 /Ga A/Ex d ia IIC T4/T3 /Gb IECEx Ex ia I Ma Ex ia IIC T3 Ga Ex d ia I Mb Ex d ia IIC T4/T3 Gb CE mark Electromagnetic Compatibility (Directive 2004/108/EC); ATEX (Directive 94/9/EC) MED Marine Equipment Directive (Directive 96/98/EC) 9094028|01.13-1|MarketingCommunications|PP|LE|PrintedinGermany|Chlorine-free–environmentallycompatible|Subjecttomodifications|©2013DrägerwerkAG&Co.KGaA ORDERING INFORMATION Dräger sensors Measuring range Resolution Response time(t90) Expected service life Order No. CatEx 125 PR1) 0 - 100 % LEL 1 % LEL 10 sec. > 4 years 68 12 950 0 - 5 Vol.-% CH4 DrägerSensor XXS O2 1) 0 - 25 Vol.-% 0.1 Vol.-% 10 sec. > 5 years 68 10 881 DrägerSensor XXS CO1) 0 - 2.000 ppm 2 ppm 15 sec. > 5 years 68 10 882 DrägerSensor XXS H2S LC1) 0 - 100 ppm 0.1 ppm 15 sec. > 5 years 68 11 525 DrägerSensor XXS SO2 0 - 100 ppm 0.1 ppm 15 sec. > 3 years 68 10 885 DrägerSensor XXS NO2 0 - 50 ppm 0.1 ppm 15 sec. > 3 years 68 10 884 1) Dräger provides a 3 year guarantee on the Dräger X-am 2500 and these sensors. The legal rights arising from defects remain unaffected. Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.heattracing.co.uk www.thorneanderrick.co.uk