Dräger X-am 5000 Portable Gas Detectors - Spec Sheet
0 likes1,082 views
The document describes the Dräger X-am 5000 gas detector. It has a compact design that is comfortable to carry and lightweight. It can reliably detect various gases with interchangeable sensors. It is durable, water resistant, and has a long battery life. The detector can be used for area monitoring and clearance measurements when paired with additional equipment.
Dräger X-am 5000 Portable Gas Detectors - Spec Sheet
- 1. ERGONOMIC MOBILE PHONE DESIGN Despite its advanced functionality, the Dräger X-am 5000's practical mobile phone design and light weight make it comfort- able to carry. Reduced to its essentials, the two button control panel and easy to follow menu allow for intuitive use. FLEXIBLE SENSOR EXCHANGE It is easy to exchange, upgrade or calibrate the sensors to other gases. The ability to customize the Dräger X-am 5000's sensors makes more applications possible, including rental equipment. POISON-RESISTANT EX SENSOR For improved safety when facing unknown and potentially explosive hazards – the Dräger X-am 5000 provides dependable warnings in the event of explosive atmospheres thanks to the high level of sensitivity of the innovative catalytic Ex sensor. It not only responds quickly to explosive gases and combustible organic vapors, but is also highly resistant against sensor poisons such as silicone and hydrogen sulfide. In combination with its long term stability this offers an extraordinary long expected sensor lifetime of more than 4 years. This will reduce your operational costs. DURABLE SENSOR TECHNOLOGY Equipped with durable XXS sensor technology, the Dräger X-am 5000 offers maximum security at extremely low operational costs. The sensor's resistance, in combination with its long term stability, provides the sensor with a lifetime in excess of four years, which can help reduce your operational costs. ROBUST AND WATER-TIGHT The Dräger X-am 5000 is water and dust resistant according to IP 67 standards. This means that the detector remains fully functional and ready for use even after being dropped into water. The integrated rubber protection and shock-proof sensors provide additional resistance to impact and vibration. Moreover, the Dräger X-am 5000 is resistant to electromagnetic interference. EXTERNAL PUMP The optional external pump, which operates with a hose up to 30 (98 feet) meters long, makes it possible to use the detector for pre-entry measurements into confined spaces such as tanks, shafts, etc. The pump starts automatically when the detector is inserted. AREA MONITORING In combination with the Dräger X-zone 5000 the gas detector can be used for The Dräger X-am 5000 belongs to a new generation of gas detectors, developed especially for personal monitoring appli- cations. This 1 to 5-gas detector reliably measures combustible gases and vapors as well as O2 and harmful concentrations of O3, Cl2, CO, CO H2-CP, CO2, H2, H2S, HCN, NH3, NO, NO2, PH3, SO2, COCl2, organic vapors, Odorant and Amine. Dräger X-am® 5000 Multi-Gas Detector Dräger X-am 5000 Smallest gas detector for up to 5 gases with advanced functionality. ST-9468-2007 ST-9618-2007 Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.heattracing.co.uk www.thorneanderrick.co.uk
- 2. 02 | DRÄGER X-AM 5000 various area monitoring applications. Up to 25 Dräger X-zone 5000 units can be automatically interconnected to form a wireless fenceline. This interconnection of the area monitoring devices allows for the fast securing of larger areas, e.g. pipelines or industrial tanks – even within the scope of industrial shutdowns. OPTIMUM SOLUTIONS FOR FUNCTION OR BUMP TESTS AND CALIBRATIONS Simple, fast and professional: from a function or bump test to complete documentation, users can choose from a range of practical, on-site solutions that offer maximum safety for every application. The Dräger E-Cal automatic test and calibration station and the Dräger Bump Test Station are ideal system extensions that save time and reduce workload. Fresh air, mixed gas and single gas calibrations can be done directly using the Dräger X-am 5000 menu. FLEXIBLE POWER SUPPLY The Dräger X-am 5000 can be used with either the standard alkaline or rechargeable NiIMH batteries. In addition, it can be fitted with a T4 battery that can be charged while still inside the instrument. An optional Save Energy Mode makes it possible to increase the operating time of Dräger X-am 5000 to more than 40 hours. This is done by selecting a measurement interval of either 1 second (the standard), 10 or 20 seconds for the CatEx sensor. ORDER INFORMATION Dräger X-am 5000 Consisting of: basic instrument with an integrated data logger and manufacturer's and calibration certificates. 83 20 000 A functional instrument must include up to 4 sensors and a power supply unit. Description Measuring range Resolution Response time (t90) Order code CatEx 125 PR1) 0 - 100 % LEL 1 % LEL 10 sec. 68 12 950 0 - 100 Vol.-% CH4 CatEx 125 Mining1) 0 - 100 % LEL 1 % LEL 10 sec. 68 11 970 0 - 100 Vol.-% CH4 DrägerSensor XXS O2 0 - 25 Vol.-% 0.1 Vol.-% 10 sec. 68 10 881 DrägerSensor XXS CO 0 - 2,000 ppm 2 ppm 15 sec. 68 10 882 DrägerSensor XXS CO HC 0 - 10,000 ppm 5 ppm 25 sec. 68 12 010 DrägerSensor XXS CO/H2 compensated 0 - 2,000 ppm CO 2 ppm 25 sec. 68 11 950 DrägerSensor XXS H2S 0 - 200 ppm 1 ppm 15 sec. 68 10 883 DrägerSensor XXS H2S LC 0 - 100 ppm 0.1 ppm 15 sec. 68 11 525 DrägerSensor XXS H2S HC 0 - 1,000 ppm 2 ppm 15 sec. 68 12 015 1) Special calibration for Ex sensors are available (standard setting: Methane) Gas inlets: At the top and the bottom for safe readings Dräger sensors: Fast, accurate and reliable Large display: All readings at one glance ST-9466-2007 Visual alarm: 360° visible alarm Retroreflective label: Easy to find in the dark or in water Dräger X-am 5000 Optional external pump for clearance measurements Dräger X-am 5000 Robust and water-tight ST-16006-2008ST-11112-2008
- 3. DRÄGER X-AM 5000 | 03 ORDER INFORMATION Description Measuring range Resolution Response time (t90) Order code DrägerSensor XXS CO/H2S 0 - 2,000 ppm CO / 0 - 200 ppm H2S 1 ppm H2S / 2 ppm CO 20 sec. 68 11 410 DrägerSensor XXS NO 0 - 200 ppm 0.5 ppm 10 sec. 68 11 545 DrägerSensor XXS NO2 0 - 50 ppm 0.1 ppm 15 sec. 68 10 884 DrägerSensor XXS NO2 LC 0 - 50 ppm 0.02 ppm 15 sec. 68 12 600 DrägerSensor XXS SO2 0 - 100 ppm 0.1 ppm 15 sec. 68 10 885 DrägerSensor XXS PH3 0 - 20 ppm 0.01 ppm 10 sec. 68 10 886 DrägerSensor XXS PH3 HC 0 - 2,000 ppm 1 ppm 10 sec. 68 12 020 DrägerSensor XXS HCN 0 - 50 ppm 0.1 ppm 10 sec.* 68 10 887 DrägerSensor XXS NH3 0 - 300 ppm 1 ppm 20 sec.* 68 10 888 DrägerSensor XXS CO2 0 - 5 Vol.-% 0.1 Vol.-% 30 sec.* 68 10 889 DrägerSensor XXS CI2 0 - 20 ppm 0.05 ppm 30 sec. 68 10 890 DrägerSensor XXS H2 0 - 2,000 ppm 5 ppm 10 sec. 68 12 370 DrägerSensor XXS H2 HC 0 - 4 Vol.-% 0.01 Vol.-% 20 sec. 68 12 025 DrägerSensor XXS OV 0 - 200 ppm 0.5 ppm 20 sec.* 68 11 530 DrägerSensor XXS OV-A 0 - 200 ppm 1 ppm 40 sec.* 68 11 535 DrägerSensor XXS Amine 0 - 100 ppm 1 ppm 30 sec. 68 12 545 DrägerSensor XXS Odorant 0 - 40 ppm 0.5 ppm 90 sec. 68 12 535 DrägerSensor XXS COCl2 0 - 10 ppm 0.01 ppm 20 sec.* 68 12 005 DrägerSensor XXS Ozone 0 - 10 ppm 0.01 ppm 10 sec.* 68 11 540 Sensors with a 5 year warranty DrägerSensor XXS E CO 0 - 2,000 ppm 2 ppm 15 sec. 68 12 212 DrägerSensor XXS E H2S 0 - 200 ppm 1 ppm 15 sec. 68 12 213 DrägerSensor XXS E O2 0 - 25 Vol.-% 0.1 Vol.-% 10 sec. 68 12 211 * Response time (t50) Power supply units NiMH power pack T4 83 18 704 Power pack & charging set 83 18 785 Consisting of: rechargeable NiMH power supply T4, charging module and a single charger (for worldwide use). Alkaline power pack T3/T4 (without alkaline batteries) 83 18 703 Alkaline batteries T4 (2 pc.) for alkaline power supply 83 18 703 83 18 708 NiMH rechargeable batteries T3 for alkaline power supply unit 83 18 703, charged externally 83 19 426 Charging accessories Charging module 83 18 639 Charging set basic consisting of one charging module and a single power supply (worldwide use) 83 20 333 Power supply with connection cable (worldwide use) for max. 20 charging modules 83 15 805 Single charger (worldwide use) for max. 5 charging modules 83 16 994 Single charger (worldwide use) for max. 2 charging modules 83 15 635 Car charging connection cable 12 / 24 V for a charging module 45 30 057 Vehicle charger mounting kit for a X-am 1/2/5x00 car charging module 83 18 779 Pump accessories Dräger X-am 5000 external pump 83 19 400 Hand pump adapter 83 19 195 Confined space entry set, with an external pump and 3m Viton hose 83 19 399 Carrying case Dräger X-am 1/2/5x00 external pump, without content 83 19 385 Calibration accessories Calibration cradle for X-am 1/2/5x00 83 18 752 Dräger E-Cal module for Dräger X-am 1/2/5x00 83 18 754 Dräger Bump Test Station for Dräger X-am 5000, not including gas cylinder 83 19 131 Dräger Bump Test Station for Dräger X-am 5000, complete with one test gas cylinder 58L (gases and concentration variable) 83 19 130 Printer set for Dräger Bump Test Station consisting of: Dräger Mobile Printer, single charger, rechargeable NiMH batteries, 83 21 011 USB connection cable, positioning aid, Dräger CC-Vision standard Nonane Checker for Dräger X-am 5000 83 20 080 Communication accessories Dräger GasVision 83 14 034 Dräger CC-Vision 64 08 515 USB DIRA with USB cable, communication adapter infrared to USB 83 17 409 PC communication set 1 with USB port, Dräger CC-Vision incl. registration software 83 18 761 PC communication set 2 with USB port, Dräger CC-Vision incl. registration software and barcode reader 83 18 762
- 4. 04 | DRÄGER X-AM 5000 TECHNICAL DATA Dimensions (W x H x D) 48 x 130 x 44 mm; 1.89 x 5.12 x 1.73 in. Weight 220 - 250 g; 7.8 - 8.8 oz. Ambient conditions Temperature -20 - +50 °C; -4 - 122 °F Pressure 700 - 1300 hPa Humidity 10 - 95% r.h. Alarms Visual 360° Audible Multi-tone >90 dB at 30 cm Vibrating Ingress Protection IP 67 Operating time > 12 hours (without Ex sensor > 700 hours) when using the Save Energy Mode > 40 hours Charging time < 4 hours Data logger Can be read out via Infrared > 1,000 hours with 5 gases and a recording interval of 1 value per minute Pump operation Maximum hose length 30 m; 98 ft. Approvals ATEX I M1 Ex ia I II 1G Ex ia IIC T3 (Zone 0) I M2 Ex d ia I II 2G Ex d ia IIC T4/T3 Measurement performance certificate according to: - EN 50104 (2002) + A1 (2004) O2 - EN 45544 CO & H2S - EN 60079-29-1:2007 Methane to Nonane - EN 50271:2001 Software and Documentation UL Class I & II, Div. 1 Group A, B, C, D, E, F, G T.-Code T4/T3 CSA Class I, Div. 1 Group A, B, C, D T.-Code T4/T3 IECEx Ex ia I Ex ia IIC T3 Ex d ia I Ex d ia IIC T4/T3 CE-mark Electromagnetic compatibility Directive 2004/108/EG; EN 50270:2006 MED Marine Equipment Directive 96/98/EC MSHA Cases Leather carrying case 83 18 755 Carrying case for charging accessories, probes, external pump, hose and gas cylinder (without content) 83 20 467 Area Monitoring1) Dräger X-zone 5000 868 MHz, 12 Ah 83 20 740 Dräger X-zone 5000 868 MHz, 24 Ah 83 20 741 Dräger X-zone 5000 868 MHz, 12 Ah, integrated pump 83 20 742 Dräger X-zone 5000 868 MHz, 24 Ah, integrated pump 83 20 743 1) Further versions (915 MHz, 433 MHz, 429 MHz) available on request 9046318|07.11-4|MarketingCommunications|PR|LE|PrintedinGermany|Chlorine-free–environmentallycompatible|Subjecttomodifications|©2011DrägerwerkAG&Co.KGaA Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.heattracing.co.uk www.thorneanderrick.co.uk