Basic 8051 question
Download as DOCX, PDF8 likes11,243 views
This document contains questions and answers related to the 8085 microprocessor and its architecture. Some key details include: - The 8085 is an 8-bit microprocessor that uses registers like the accumulator, temporary, instruction, and stack pointer registers. The stack pointer and program counter are 16-bits. - It uses flags like sign, zero, auxiliary, parity, and carry. The stack is LIFO and the program counter stores the address of the next instruction. - When the HLT instruction is executed, the processor enters a halt state and the buses are tri-stated. Interrupts are classified as hardware or software.
![24. What is the final keyword denotes? - final keyword denotes that it is the final
implementation for that method or variable or class. You can’t override that
method/variable/class any more.
25. What is the significance of ListIterator? - You can iterate back and forth.
26. What is the major difference between LinkedList and ArrayList? - LinkedList are
meant for sequential accessing. ArrayList are meant for random accessing.
27. What is nested class? - If all the methods of a inner class is static then it is a nested
class.
28. What is inner class? - If the methods of the inner class can only be accessed via the
instance of the inner class, then it is called inner class.
29. What is composition? - Holding the reference of the other class within some other
class is known as composition.
30. What is aggregation? - It is a special type of composition. If you expose all the
methods of a composite class and route the method call to the composite method
through its reference, then it is called aggregation.
31. What are the methods in Object? - clone, equals, wait, finalize, getClass, hashCode,
notify, notifyAll, toString
32. Can you instantiate the Math class? - You can’t instantiate the math class. All the
methods in this class are static. And the constructor is not public.
33. What is singleton? - It is one of the design pattern. This falls in the creational pattern of
the design pattern. There will be only one instance for that entire JVM. You can achieve
this by having the private constructor in the class. For eg., public class Singleton {
private static final Singleton s = new Singleton(); private Singleton() { } public static
Singleton getInstance() { return s; } // all non static methods … }
34. What is DriverManager? - The basic service to manage set of JDBC drivers.
35. What is Class.forName() does and how it is useful? - It loads the class into the
ClassLoader. It returns the Class. Using that you can get the instance ( “class-
instance”.newInstance() ).
36. Inq adds a question: Expain the reason for each keyword of
public static void main(String args[])
J2EE interview questions and answers
1. What makes J2EE suitable for distributed multitier Applications?
- The J2EE platform uses a multitier distributed application model. Application logic is
divided into components according to function, and the various application components
that make up a J2EE application are installed on different machines depending on the
tier in the multitier J2EE environment to which the application component belongs. The
J2EE application parts are:
Client-tier components run on the client machine.
Web-tier components run on the J2EE server.
Business-tier components run on the J2EE server.
Enterprise information system (EIS)-tier software runs on the EIS server.](https://image.slidesharecdn.com/eceproject-130807111235-phpapp01/85/Basic-8051-question-5-320.jpg)
![application significantly easier to create and maintain. Controller: Servlet controller
which supplied by Struts itself; View: what you can see on the screen, a JSP page and
presentation components; Model: System state and a business logic JavaBeans.
Java keywords public static void main (String args[])
The public keyword is an access specifier, which allows the programmer to control the
visibility of class members. When a class member is preceded by public, then that
member may be accessed by code outside the class in which it is declared.
In this case, main( ) must be declared as public, since it must be called by code outside of
its class when the program is started.
The keyword static allows main( ) to be called without having to instantiate a particular
instance of the class. This is necessary since main( ) is called by the Java interpreter
before any objects are made. The keyword void simply tells the compiler that main( )
does not return a value. As you will see, methods may also return values.
As stated, main( ) is the method called when a Java application begins. Keep in mind that
Java is case-sensitive. Thus, Main is different from main. It is important to understand
that the Java compiler will compile classes that do not contain a main( ) method. But the
Java interpreter has no way to run these classes. So, if you had typed Main instead of
main, the compiler would still compile your program. However, the Java interpreter
would report an error because it would be unable to find the main( ) method.
Any information that you need to pass to a method is received by variables specified
within the set of parentheses that follow the name of the method. These variables are
called parameters. If there are no parameters required for a given method, you still need
to include the empty parentheses. In main( ), there is only one parameter, albeit a
complicated one. String args[ ] declares a parameter named args, which is an array of
instances of the class String. Objects of type String store character strings. In this case,
args receives any command-line arguments present when the program is executed.](https://image.slidesharecdn.com/eceproject-130807111235-phpapp01/85/Basic-8051-question-9-320.jpg)
Basic 8051 question
- 1. 8085 microprocessor questions 1. What are the various registers in 8085? - Accumulator register, Temporary register, Instruction register, Stack Pointer, Program Counter are the various registers in 8085 . 2. In 8085 name the 16 bit registers? - Stack pointer and Program counter all have 16 bits. 3. What are the various flags used in 8085? - Sign flag, Zero flag, Auxillary flag, Parity flag, Carry flag. 4. What is Stack Pointer? - Stack pointer is a special purpose 16-bit register in the Microprocessor, which holds the address of the top of the stack. 5. What is Program counter? - Program counter holds the address of either the first byte of the next instruction to be fetched for execution or the address of the next byte of a multi byte instruction, which has not been completely fetched. In both the cases it gets incremented automatically one by one as the instruction bytes get fetched. Also Program register keeps the address of the next instruction. 6. Which Stack is used in 8085? - LIFO (Last In First Out) stack is used in 8085.In this type of Stack the last stored information can be retrieved first. 7. What happens when HLT instruction is executed in processor? - The Micro Processor enters into Halt-State and the buses are tri-stated. 8. What is meant by a bus? - A bus is a group of conducting lines that carriers data, address, & control signals. 9. What is Tri-state logic? - Three Logic Levels are used and they are High, Low, High impedance state. The high and low are normal logic levels & high impedance state is electrical open circuit conditions. Tri-state logic has a third line called enable line. 10. Give an example of one address microprocessor? - 8085 is a one address microprocessor. 11. In what way interrupts are classified in 8085? - In 8085 the interrupts are classified as Hardware and Software interrupts. 12. What are Hardware interrupts? - TRAP, RST7.5, RST6.5, RST5.5, INTR. 13. What are Software interrupts? - RST0, RST1, RST2, RST3, RST4, RST5, RST6, RST7. 14. Which interrupt has the highest priority? - TRAP has the highest priority. 15. Name 5 different addressing modes? - Immediate, Direct, Register, Register indirect, Implied addressing modes. 16. How many interrupts are there in 8085? - There are 12 interrupts in 8085. 17. What is clock frequency for 8085? - 3 MHz is the maximum clock frequency for 8085. 18. What is the RST for the TRAP? - RST 4.5 is called as TRAP. 19. In 8085 which is called as High order / Low order Register? - Flag is called as Low order register & Accumulator is called as High order Register. 20. What are input & output devices? - Keyboards, Floppy disk are the examples of input devices. Printer, LED / LCD display, CRT Monitor are the examples of output devices. 21. Can an RC circuit be used as clock source for 8085? - Yes, it can be used, if an accurate clock frequency is not required. Also, the component cost is low compared to LC or Crystal.
- 2. 22. Why crystal is a preferred clock source? - Because of high stability, large Q (Quality Factor) & the frequency that doesn’t drift with aging. Crystal is used as a clock source most of the times. 23. Which interrupt is not level-sensitive in 8085? - RST 7.5 is a raising edge-triggering interrupt. 24. What does Quality factor mean? - The Quality factor is also defined, as Q. So it is a number, which reflects the losses of a circuit. Higher the Q, the lower are the losses. 25. What are level-triggering interrupt? - RST 6.5 & RST 5.5 is level-triggering interrupts. x86 interview questions and answers 1. What is a Microprocessor? - Microprocessor is a program-controlled device, which fetches the instructions from memory, decodes and executes the instructions. Most Micro Processor are single- chip devices. 2. Give examples for 8 / 16 / 32 bit Microprocessor? - 8-bit Processor - 8085 / Z80 / 6800; 16-bit Processor - 8086 / 68000 / Z8000; 32-bit Processor - 80386 / 80486. 3. Why 8085 processor is called an 8 bit processor? - Because 8085 processor has 8 bit ALU (Arithmetic Logic Review). Similarly 8086 processor has 16 bit ALU. 4. What is 1st / 2nd / 3rd / 4th generation processor? - The processor made of PMOS / NMOS / HMOS / HCMOS technology is called 1st / 2nd / 3rd / 4th generation processor, and it is made up of 4 / 8 / 16 / 32 bits. 5. Define HCMOS? - High-density n- type Complimentary Metal Oxide Silicon field effect transistor. 6. What does microprocessor speed depend on? - The processing speed depends on DATA BUS WIDTH. 7. Is the address bus unidirectional? - The address bus is unidirectional because the address information is always given by the Micro Processor to address a memory location of an input / output devices. 8. Is the data bus is Bi-directional? - The data bus is Bi-directional because the same bus is used for transfer of data between Micro Processor and memory or input / output devices in both the direction. 9. What is the disadvantage of microprocessor? - It has limitations on the size of data. Most Microprocessor does not support floating-point operations. 10. What is the difference between microprocessor and microcontroller? - In Microprocessor more op-codes, few bit handling instructions. But in Microcontroller: fewer op-codes, more bit handling Instructions, and also it is defined as a device that includes micro processor, memory, & input / output signal lines on a single chip. 11. What is meant by LATCH? - Latch is a D- type flip-flop used as a temporary storage device controlled by a timing signal, which can store 0 or 1. The primary function of a Latch is data storage. It is used in output devices such as LED, to hold the data for display. 12. Why does microprocessor contain ROM chips? - Microprocessor contain ROM chip because it contain instructions to execute data.
- 3. 13. What is the difference between primary & secondary storage device? - In primary storage device the storage capacity is limited. It has a volatile memory. In secondary storage device the storage capacity is larger. It is a nonvolatile memory. Primary devices are: RAM / ROM. Secondary devices are: Floppy disc / Hard disk. 14. Difference between static and dynamic RAM? - Static RAM: No refreshing, 6 to 8 MOS transistors are required to form one memory cell, Information stored as voltage level in a flip flop. Dynamic RAM: Refreshed periodically, 3 to 4 transistors are required to form one memory cell, Information is stored as a charge in the gate to substrate capacitance. 15. What is interrupt? - Interrupt is a signal send by external device to the processor so as to request the processor to perform a particular work. 16. What is cache memory? - Cache memory is a small high-speed memory. It is used for temporary storage of data & information between the main memory and the CPU (center processing unit). The cache memory is only in RAM. 17. What is called “Scratch pad of computer―? - Cache Memory is scratch pad of computer. 18. Which transistor is used in each cell of EPROM? - Floating –gate Avalanche Injection MOS (FAMOS) transistor is used in each cell of EPROM. 19. Differentiate between RAM and ROM? - RAM: Read / Write memory, High Speed, Volatile Memory. ROM: Read only memory, Low Speed, Non Volatile Memory. 20. What is a compiler? - Compiler is used to translate the high-level language program into machine code at a time. It doesn’t require special instruction to store in a memory, it stores automatically. The Execution time is less compared to Interpreter. 21. Which processor structure is pipelined? - All x86 processors have pipelined structure. 22. What is flag? - Flag is a flip-flop used to store the information about the status of a processor and the status of the instruction executed most recently 23. What is stack? - Stack is a portion of RAM used for saving the content of Program Counter and general purpose registers. 24. Can ROM be used as stack? - ROM cannot be used as stack because it is not possible to write to ROM. 25. What is NV-RAM? - Nonvolatile Read Write Memory also called Flash memory. It is also known as shadow RAM. Java interview questions and answers 1. What is garbage collection? What is the process that is responsible for doing that in java? - Reclaiming the unused memory by the invalid objects. Garbage collector is responsible for this process 2. What kind of thread is the Garbage collector thread? - It is a daemon thread. 3. What is a daemon thread? - These are the threads which can run without user intervention. The JVM can exit when there are daemon thread by killing them abruptly. 4. How will you invoke any external process in Java? - Runtime.getRuntime().exec(….) 5. What is the finalize method do? - Before the invalid objects get garbage collected, the JVM give the user a chance to clean up some resources before it got garbage collected.
- 4. 6. What is mutable object and immutable object? - If a object value is changeable then we can call it as Mutable object. (Ex., StringBuffer, …) If you are not allowed to change the value of an object, it is immutable object. (Ex., String, Integer, Float, …) 7. What is the basic difference between string and stringbuffer object? - String is an immutable object. StringBuffer is a mutable object. 8. What is the purpose of Void class? - The Void class is a uninstantiable placeholder class to hold a reference to the Class object representing the primitive Java type void. 9. What is reflection? - Reflection allows programmatic access to information about the fields, methods and constructors of loaded classes, and the use reflected fields, methods, and constructors to operate on their underlying counterparts on objects, within security restrictions. 10. What is the base class for Error and Exception? - Throwable 11. What is the byte range? -128 to 127 12. What is the implementation of destroy method in java.. is it native or java code? - This method is not implemented. 13. What is a package? - To group set of classes into a single unit is known as packaging. Packages provides wide namespace ability. 14. What are the approaches that you will follow for making a program very efficient? - By avoiding too much of static methods avoiding the excessive and unnecessary use of synchronized methods Selection of related classes based on the application (meaning synchronized classes for multiuser and non-synchronized classes for single user) Usage of appropriate design patterns Using cache methodologies for remote invocations Avoiding creation of variables within a loop and lot more. 15. What is a DatabaseMetaData? - Comprehensive information about the database as a whole. 16. What is Locale? - A Locale object represents a specific geographical, political, or cultural region 17. How will you load a specific locale? - Using ResourceBundle.getBundle(…); 18. What is JIT and its use? - Really, just a very fast compiler… In this incarnation, pretty much a one-pass compiler — no offline computations. So you can’t look at the whole method, rank the expressions according to which ones are re-used the most, and then generate code. In theory terms, it’s an on-line problem. 19. Is JVM a compiler or an interpreter? - Interpreter 20. When you think about optimization, what is the best way to find out the time/memory consuming process? - Using profiler 21. What is the purpose of assert keyword used in JDK1.4.x? - In order to validate certain expressions. It effectively replaces the if block and automatically throws the AssertionError on failure. This keyword should be used for the critical arguments. Meaning, without that the method does nothing. 22. How will you get the platform dependent values like line separator, path separator, etc., ? - Using Sytem.getProperty(…) (line.separator, path.separator, …) 23. What is skeleton and stub? what is the purpose of those? - Stub is a client side representation of the server, which takes care of communicating with the remote server. Skeleton is the server side representation. But that is no more in use… it is deprecated long before in JDK.
- 5. 24. What is the final keyword denotes? - final keyword denotes that it is the final implementation for that method or variable or class. You can’t override that method/variable/class any more. 25. What is the significance of ListIterator? - You can iterate back and forth. 26. What is the major difference between LinkedList and ArrayList? - LinkedList are meant for sequential accessing. ArrayList are meant for random accessing. 27. What is nested class? - If all the methods of a inner class is static then it is a nested class. 28. What is inner class? - If the methods of the inner class can only be accessed via the instance of the inner class, then it is called inner class. 29. What is composition? - Holding the reference of the other class within some other class is known as composition. 30. What is aggregation? - It is a special type of composition. If you expose all the methods of a composite class and route the method call to the composite method through its reference, then it is called aggregation. 31. What are the methods in Object? - clone, equals, wait, finalize, getClass, hashCode, notify, notifyAll, toString 32. Can you instantiate the Math class? - You can’t instantiate the math class. All the methods in this class are static. And the constructor is not public. 33. What is singleton? - It is one of the design pattern. This falls in the creational pattern of the design pattern. There will be only one instance for that entire JVM. You can achieve this by having the private constructor in the class. For eg., public class Singleton { private static final Singleton s = new Singleton(); private Singleton() { } public static Singleton getInstance() { return s; } // all non static methods … } 34. What is DriverManager? - The basic service to manage set of JDBC drivers. 35. What is Class.forName() does and how it is useful? - It loads the class into the ClassLoader. It returns the Class. Using that you can get the instance ( “class- instance”.newInstance() ). 36. Inq adds a question: Expain the reason for each keyword of public static void main(String args[]) J2EE interview questions and answers 1. What makes J2EE suitable for distributed multitier Applications? - The J2EE platform uses a multitier distributed application model. Application logic is divided into components according to function, and the various application components that make up a J2EE application are installed on different machines depending on the tier in the multitier J2EE environment to which the application component belongs. The J2EE application parts are: Client-tier components run on the client machine. Web-tier components run on the J2EE server. Business-tier components run on the J2EE server. Enterprise information system (EIS)-tier software runs on the EIS server.
- 6. 2. What is J2EE? - J2EE is an environment for developing and deploying enterprise applications. The J2EE platform consists of a set of services, application programming interfaces (APIs), and protocols that provide the functionality for developing multitiered, web-based applications. 3. What are the components of J2EE application? - A J2EE component is a self-contained functional software unit that is assembled into a J2EE application with its related classes and files and communicates with other components. The J2EE specification defines the following J2EE components: A. Application clients and applets are client components. B. Java Servlet and JavaServer Pages technology components are web components. C. Enterprise JavaBeans components (enterprise beans) are business components. D. Resource adapter components provided by EIS and tool vendors. What do Enterprise JavaBeans components contain? - Enterprise JavaBeans components contains Business code, which is logic that solves or meets the needs of a particular business domain such as banking, retail, or finance, is handled by enterprise beans running in the business tier. All the business code is contained inside an Enterprise Bean which receives data from client programs, processes it (if necessary), and sends it to the enterprise information system tier for storage. An enterprise bean also retrieves data from storage, processes it (if necessary), and sends it back to the client program. Is J2EE application only a web-based? - No, It depends on type of application that client wants. A J2EE application can be web-based or non-web-based. if an application client executes on the client machine, it is a non-web-based J2EE application. The J2EE application can provide a way for users to handle tasks such as J2EE system or application administration. It typically has a graphical user interface created from Swing or AWT APIs, or a command-line interface. When user request, it can open an HTTP connection to establish communication with a servlet running in the web tier. Are JavaBeans J2EE components? - No. JavaBeans components are not considered J2EE components by the J2EE specification. They are written to manage the data flow between an application client or applet and components running on the J2EE server or between server components and a database. JavaBeans components written for the J2EE platform have instance variables and get and set methods for accessing the data in the instance variables. JavaBeans components used in this way are typically simple in design and implementation, but should conform to the naming and design conventions outlined in the JavaBeans component architecture. Is HTML page a web component? - No. Static HTML pages and applets are bundled with web components during application assembly, but are not considered web components by the J2EE specification. Even the server-side utility classes are not considered web components, either. What can be considered as a web component? - J2EE Web components can be either servlets or JSP pages. Servlets are Java programming language classes that dynamically process requests and construct responses. JSP pages are text-based documents that execute as servlets but allow a more natural approach to creating static content.
- 7. What is the container? - Containers are the interface between a component and the low-level platform specific functionality that supports the component. Before a Web, enterprise bean, or application client component can be executed, it must be assembled into a J2EE application and deployed into its container. What are container services? - A container is a runtime support of a system- level entity. Containers provide components with services such as lifecycle management, security, deployment, and threading. What is the web container? - Servlet and JSP containers are collectively referred to as Web containers. It manages the execution of JSP page and servlet components for J2EE applications. Web components and their container run on the J2EE server. What is Enterprise JavaBeans (EJB) container? - It manages the execution of enterprise beans for J2EE applications. Enterprise beans and their container run on the J2EE server. What is Applet container? - Manages the execution of applets. Consists of a Web browser and Java Plugin running on the client together. How do we package J2EE components? - J2EE components are packaged separately and bundled into a J2EE application for deployment. Each component, its related files such as GIF and HTML files or server-side utility classes, and a deployment descriptor are assembled into a module and added to the J2EE application. A J2EE application is composed of one or more enterprise bean,Web, or application client component modules. The final enterprise solution can use one J2EE application or be made up of two or more J2EE applications, depending on design requirements. A J2EE application and each of its modules has its own deployment descriptor. A deployment descriptor is an XML document with an .xml extension that describes a component’s deployment settings. What is a thin client? - A thin client is a lightweight interface to the application that does not have such operations like query databases, execute complex business rules, or connect to legacy applications. What are types of J2EE clients? - Following are the types of J2EE clients: Applets Application clients Java Web Start-enabled rich clients, powered by Java Web Start technology. Wireless clients, based on Mobile Information Device Profile (MIDP) technology. What is deployment descriptor? - A deployment descriptor is an Extensible Markup Language (XML) text-based file with an .xml extension that describes a component’s deployment settings. A J2EE application and each of its modules has its own deployment descriptor. For example, an enterprise bean module deployment descriptor declares transaction attributes and security authorizations for an enterprise bean. Because deployment descriptor information is declarative, it can be changed without modifying the bean source code. At run time, the J2EE server reads the deployment descriptor and acts upon the component accordingly. What is the EAR file? - An EAR file is a standard JAR file with an .ear extension, named from Enterprise ARchive file. A J2EE application with all of its modules is delivered in EAR file. What is JTA and JTS? - JTA is the abbreviation for the Java Transaction API. JTS is the abbreviation for the Jave Transaction Service. JTA provides a standard
- 8. interface and allows you to demarcate transactions in a manner that is independent of the transaction manager implementation. The J2EE SDK implements the transaction manager with JTS. But your code doesn’t call the JTS methods directly. Instead, it invokes the JTA methods, which then call the lower-level JTS routines. Therefore, JTA is a high level transaction interface that your application uses to control transaction. and JTS is a low level transaction interface and ejb uses behind the scenes (client code doesn’t directly interact with JTS. It is based on object transaction service(OTS) which is part of CORBA. What is JAXP? - JAXP stands for Java API for XML. XML is a language for representing and describing text-based data which can be read and handled by any program or tool that uses XML APIs. It provides standard services to determine the type of an arbitrary piece of data, encapsulate access to it, discover the operations available on it, and create the appropriate JavaBeans component to perform those operations. What is J2EE Connector? - The J2EE Connector API is used by J2EE tools vendors and system integrators to create resource adapters that support access to enterprise information systems that can be plugged into any J2EE product. Each type of database or EIS has a different resource adapter. Note: A resource adapter is a software component that allows J2EE application components to access and interact with the underlying resource manager. Because a resource adapter is specific to its resource manager, there is typically a different resource adapter for each type of database or enterprise information system. What is JAAP? - The Java Authentication and Authorization Service (JAAS) provides a way for a J2EE application to authenticate and authorize a specific user or group of users to run it. It is a standard Pluggable Authentication Module (PAM) framework that extends the Java 2 platform security architecture to support user-based authorization. What is Java Naming and Directory Service? - The JNDI provides naming and directory functionality. It provides applications with methods for performing standard directory operations, such as associating attributes with objects and searching for objects using their attributes. Using JNDI, a J2EE application can store and retrieve any type of named Java object. Because JNDI is independent of any specific implementations, applications can use JNDI to access multiple naming and directory services, including existing naming and directory services such as LDAP, NDS, DNS, and NIS. What is Struts? - A Web page development framework. Struts combines Java Servlets, Java Server Pages, custom tags, and message resources into a unified framework. It is a cooperative, synergistic platform, suitable for development teams, independent developers, and everyone between. How is the MVC design pattern used in Struts framework? - In the MVC design pattern, application flow is mediated by a central Controller. The Controller delegates requests to an appropriate handler. The handlers are tied to a Model, and each handler acts as an adapter between the request and the Model. The Model represents, or encapsulates, an application’s business logic or state. Control is usually then forwarded back through the Controller to the appropriate View. The forwarding can be determined by consulting a set of mappings, usually loaded from a database or configuration file. This provides a loose coupling between the View and Model, which can make an
- 9. application significantly easier to create and maintain. Controller: Servlet controller which supplied by Struts itself; View: what you can see on the screen, a JSP page and presentation components; Model: System state and a business logic JavaBeans. Java keywords public static void main (String args[]) The public keyword is an access specifier, which allows the programmer to control the visibility of class members. When a class member is preceded by public, then that member may be accessed by code outside the class in which it is declared. In this case, main( ) must be declared as public, since it must be called by code outside of its class when the program is started. The keyword static allows main( ) to be called without having to instantiate a particular instance of the class. This is necessary since main( ) is called by the Java interpreter before any objects are made. The keyword void simply tells the compiler that main( ) does not return a value. As you will see, methods may also return values. As stated, main( ) is the method called when a Java application begins. Keep in mind that Java is case-sensitive. Thus, Main is different from main. It is important to understand that the Java compiler will compile classes that do not contain a main( ) method. But the Java interpreter has no way to run these classes. So, if you had typed Main instead of main, the compiler would still compile your program. However, the Java interpreter would report an error because it would be unable to find the main( ) method. Any information that you need to pass to a method is received by variables specified within the set of parentheses that follow the name of the method. These variables are called parameters. If there are no parameters required for a given method, you still need to include the empty parentheses. In main( ), there is only one parameter, albeit a complicated one. String args[ ] declares a parameter named args, which is an array of instances of the class String. Objects of type String store character strings. In this case, args receives any command-line arguments present when the program is executed.