Embedded based car parking system
Download as PPTX, PDF8 likes3,219 views
This document presents a project on an embedded-based advanced car parking system developed by students at Bangalore Institute of Technology. The system allows users to reserve parking slots via SMS and guides cars to available slots. It uses sensors to detect vacant spots, a microcontroller to process reservations and a GSM modem for SMS communication. The system aims to reduce traffic and parking issues compared to manual systems through automated reservation and guidance. It has potential applications in malls, harbors and airports to better manage vehicle parking.
Embedded based car parking system
- 1. BANGALORE INSTITUTE OF TECHNOLOGY K.R ROAD, V.V PURAM, BENGALURU-560004 Presented By: Jayanth .S (1BI14IT403) Punitkumar Kulli (1BI14IT406) Shivareddy .N (1BI12IT045) Shubham Laturkar (1BI14IT407) Project Guide: D. Bharathi, Asst Prof Department of IT Bangalore Institute of Technology Project Presentation on “Embedded Based Advance Car Parking System”
- 2. Contents • Introduction • Overview • Block diagram • Methodology • Hardware, software • Module working • Advantages • Disadvantages • Applications • Future aspects • Conclusion • References
- 3. Introduction • Currently, most of the existing car parking system are manually managed and a little inefficient. • The system heavily relies on human interaction with the physical space and entity, this leads to wastage of manpower and also parking spaces. • Automatic car parking system provides pre booking of slots through messages. which reduces the parking traffics and time wastages for parking. • In this parking system whenever the car enters into parking zone, the system guide them clearly where the free or booked slot is available.
- 4. Overview A parking reservation system is developed in such a way that users book their parking slots through short message services (SMS). The SMS sent will be processed by microcontroller. It will reply the confirmation of booking by giving the details of reservation like password and slot number. The password will be used to enter the parking area and valid for a certain period of time.
- 6. Methodology • Parking sensor to sense the parking area and determine whether a parking slot is vacant or not. • Processing unit acts like an intermediate between the sensors and GSM. All the sensors are connected to the processing unit. • Message task acts like an interface for the end users to interact with the system.
- 7. Hardware and Software requirements Hardware requirements • ARM Controller • IR Sensors • Relay & DC Motors • Keypad & LCD display • RF Reader • GSM Modem Software Requirement • Kiel vision 4 • Embedded C
- 8. Power Supply • Power supply unit provides regulated 5v power. • The power supply circuit consists of a bridge rectifier which is then passed on to the regulator through a filter circuit.
- 9. 1. ARM Controller • 32 bit controller • 64 multi functional pins • Two I/O ports • Low power consumption • Two 32 bit timers • Two UART for serial communication
- 10. 2. IR Sensors • IR Sensors consists of two parts • IR transmitter • IR receiver • IR sensors used for monitoring and displaying the status of parking slots in LCD.
- 11. 3. Relay And Dc Motor • A relay is a simple electromechanical switch made up of an electromagnet and a set of contacts. • Relays are switches that open and close circuits electromechanically. • DC motor is used as gate controller. • Consists armature in between south and north magnetic poles. Relay DC Motor
- 12. 4. Keypad & LCD Module • LCD module used for displaying the details of parking. A 16x2 LCD module and is very commonly used. • Keypad used for entering the password for the entrance of parking area. LCD KEYPAD
- 13. 5. RF Reader • RFID is a general term that is used to describe a system that transmits a unique serial number of an object wirelessly, using radio waves. • The RFID card reader read the RFID tag in range and outputs unique identification code of the tag at baud rate of 9600. • The data from RFID reader can be interfaced to be read by microcontroller or PC. Features: • Power Requirement = +5v to +12v DC • Radio Frequency used = 125KHz • IR frequency = 38khz • Read Distance = 3cm • Detection Range= 2” Inches contact-less • Valid Tag in Range = Indicated by Buzzer and LED
- 14. 6.GSM MODEM • GSM (Global system for mobiles) is a wireless network technology. • This technology is helps to establish digital cellular communication system. It is used for transmitting mobile voice and data services. FEATURES: - sim300, dual band GSM/GPRS - Frequency 900 MHz - Transmission rate 270 kbps
- 15. Module Working • User booking of parking spot through SMS. • GSM modem gets the message and fed to microcontroller using USART communication. • The ARM controller process the requested message and check the availability of parking slots using IR sensor. • ARM controller will reply the confirmation of booking by giving the password and slot number. • The counter for the reservation time will automatically start for sending message. • The password will be used to enter the parking area.
- 16. Flowchart
- 17. Advantages • Reduced traffic • Reduced pollution • Enhanced User Experience • Increased Safety • Decreased Management Costs
- 18. Disadvantages Initial maintenance cost is high. In places where there is no provision of GSM networks, it is difficult for communication
- 19. APPLICATIONS The smart parking reservation system can be implemented in : • Shopping malls • Containers traffic control at harbors. • Aircraft parking at apron area.
- 20. Future scope • In future it can be developed as android App. • Enhance efficient loading activities.
- 21. CONCLUSION As conclusion, the objectives of this project have been achieved. The hassle in searching for available parking lots has been completely eliminated by reserving the lots via the SMS system. The security feature of the system is enhanced with the password requirements upon entrance to the parking lot. The designed system could be applied everywhere due to its ease of usage and effectiveness.
- 22. REFERENCES • Yanfeng Geng, Student Member, IEEE, and Christos G. Cassandra, Fellow, IEEE “New Smart Parking System”, IEEE Transactions on intelligent transportation systems, VOL. 14, NO. 3, September 2013 • Jihoon Yang, Jorge Portilla, Teresa Riesgo “Smart Parking Service based on Wireless Sensor Networks , IEEE 2012 • Noor Hazrinhany, Mohamad Hanif, Mohd Hafiz Badiozaman, HanitaDaud, “Smart parking reservation system using short message services (SMS).” , IEEE 2009 • N. Bandu, R. Ranjana and D. Pravin, “Performance Evaluation of Modern Sophisticated Parking Management System with Space Modelling”, International Journal of Innovative Research in Computer and Communication Engineering, vol. 2,no. 11, (2014), p. 8.
- 23. THANK YOU…