Emulsion SB

Pharmaceutical Emulsions
(Dr.) Mirza Salman Baig
Assistant Professor (Pharmaceutics)
AIKTC, School of Pharmacy,New Panvel
Affiliated to University of Mumbai (INDIA)

Content
Types of Emulsions
Advantages/ Disadvantages.
Test of Identifications.
Emulsifying Agents.
Types of Emulsifying Agents.
Theories of Emulsification.
Preparation of Emulsions.
Stability of Emulsions.

3
• An Emulsion is a mixture of two or
more Immiscible liquids.
• Emulsion, is a mixture of two or more
liquids in which one is present as
droplets distributed throughout the
other.
O ilO il
W a te rW a te r
O il
W a te r
A g ita tio n
S e p a ra te ra p id ly in to tw o
c le a r d e fin e d la y e rs
O ilO il
W a te rW a te r
O il
W a te r
A g ita tio n
S e p a ra te ra p id ly in to tw o
c le a r d e fin e d la y e rs

Internal Phase or External
Phase in Emulsions:
Ø The dispersed liquid is known as
the Internal or Discontinuous
phase.
Ø whereas the dispersion medium is
known as the External or
Continuous phase

Types Of Emulsions
Based on dispersed phase:
Ø Oil in Water (O/W): Oil droplets dispersed
in water.
Ø Water in Oil (W/O): Water droplets
dispersed in oil.
Ø Water in Oil in water (W/O/W): Water in
Oil emulsion dispersed in water – multiple
emulsion.
Based on size of liquid droplets:
Ø 0.2 – 50 mm Macroemulsions
Ø 0.01 – 0.2 mm Microemulsions

Advantages of Emulsions:
Ø Mask the unpleasant taste O/W is convenient means
of oral administration of water-insoluble liquids.
Ø Oil-soluble drugs can be given parentrally in form
of oil-in water emulsion. (e.g Taxol).
Ø Emulsion can be used for external application in
cosmetic and therapeutic Application because of
Better and faster absorption.
Ø Sustained release medication.

Disadvantages of Emulsions
Ø Emulsions are thermodynamically
unstable and have short shelf-life.
Ø Improper formulation of emulsions
leads to creaming and cracking of
emulsion.
Ø Improper selection of emulsifying
agent leads to phase inversion and
some times it may also lead to
cracking.

Identification test for
Emulsions:
By using Naked eye, it is very difficult
to differentiate between o/w or w/o
emulsions. Thus, the following
methods have been used to identify
the type of emulsions.
1)Dye Test
2)Dilution Test
3)Electrical conductivity Test
4) Fluorescence Test.
5)Cobalt Chloride Test.

1) Dye TEST:
ü Water-soluble dye will dissolve in the
aqueous phase.
ü Oil-soluble dye will dissolve in the oil
phase.
Microscopic View
Oil-soluble dye (e.g. Scarlet) W ater-soluble dye (e.g. Amaranth dye)
O/W W /OO/WW /O

2) Dilution test:
Based on the solubility of external
phase of emulsion.
ü O/W emulsion can be diluted with
water.
ü W/O emulsion can be diluted with oil.
Fewdrops
ofemulsion
Fewdrops
ofwater Water distribute
uniformly
Water separate
out aslayer
O/Wemulsion
W/Oemulsion

3) Electrical Conductivity test:
ü As we know water is good conductor
of electricity whereas oil is non-
conductor. Therefore, continuous
phase of water runs electricity more
than continuous phase of oil.
Electrode
Bulb
Emulsion
Ø Bulb glows with O/W
Ø Bulb doesn’t glow with
W/O

3) Fluorescence test:
ü Oils give fluorescence under UV
light, while water doesn’t.
ü Therefore, O/W emulsion shows
spotty pattern when observed
under UV.
ü while W/O emulsion give
complete fluoresces.

4) Cobalt Chloride test:
ü Principle:
ü Cobalt Chloride solution is used for
identification of Emulsion. It is water
soluble so it changes colour when
encountered by O/W emulsion.
Procedure:
Filter paper is Dipped in Emulsion.
Filter paper changes its color from blue to
Pink
Result:
Emulsion is O/W otherwise not.

Formulation of Emulsion
• Drug (medicament)
• Oil Phase
• Aqueous phase
• Emulsifying agent (emulgent)
• Antioxidants
• Preservatives
• Organoleptic additives
– Flavouring agents
– Colouring agent

Emulsifying Agent:
Ø Emulsions are stabilized by adding an
emulsifying agent.
Ø These agents have both a hydrophilic and
Lipophilic part in their chemical structure.
Ø All emulsifying agents get adsorbed onto
the Oil : water interface to provide a
protective barrier around the dispersed
droplets.
Ø In addition to this protective barrier,
emulsifiers stabilize the emulsion by
reducing the interfacial tension of the
system.

Classification Of Emulsifying Agents:
Emulsifying agents can be classified according to
1) Chemical nature:
Ø Synthetic Emulsifying Agents
Ø Natural Emulsifying Agents
Ø Finely Dispersed Solids
Ø Other emulsifying Agents
2) Mechanism of action:
ü Monomolecular
ü Multi-molecular
ü Solid particle films.

Synthetic Emulsifying Agents
1) (pH > 8))
ü Sodium or potassium oleate
ü Triethanolamine stearate
ü sodium lauryl sulfate.
2) Cationic: (pH 3-7)
ü Benzalkonium chloride,
ü Benzethonium chloride
ü Quaternary ammonium salts.
3) Non Ionic (pH 3-10)
ü Polyglycol,
ü Fatty acid esters,
ü Lecithin.
ü Sorbitan esters (Spans).
ü Polyoxyethylene derivatives of sorbitan esters (Tweens),
ü Glyceryl esters.
* * * Cationic and Anionic surfactants are generally limited to use in topical,
o/w emulsions * * *

Natural Emulsifying Agents
Derived from Plants and Animals:
Vegetable derivatives:
ü Acacia
ü Tragacanth
ü Agar
ü Pectin
ü Carrageenan
ü Lecithin (egg)
Animal derivatives:
ü Gelatin
ü Lanolin
ü Cholesterol

Finely Divided or Finely
Dispersed Solid Particle Emulsifiers
ü These agents form a particulate layer
around dispersed particles. Most will swell
in the dispersion medium to increase
viscosity and reduce the interaction
between dispersed droplets. Most commonly
they support the formation of o/w emulsions,
ü Bentonite
ü Veegum,
ü Hectorite,
ü Magnesium Hydroxide,
ü Aluminum Hydroxide
ü Magnesium Tri silicate.

Other Emulsifying Agents
• A variety of fatty acids (e.g., stearic acid), fatty
alcohols (e.g., stearyl or cetyl alcohol), and fatty
esters (e.g., glyceryl monostearate) serve to
stabilize emulsions through their ability to thicken
the emulsion..

HLB
• A system was developed to assist in
making systemic decisions about the
amounts and types of surfactants
needed in stable products.
• The system is called the HLB
(hydrophile-lipophile balance) system
and has an arbitrary scale of 1 - 18.
HLB numbers are experimentally
determined for the different
emulsifiers. .

• Low HLB Indicates ?
ü Low number of hydrophilic groups on the
Molecule thus imparting Lipophilic
character:
ü Spans have low HLB numbers, Because of
their oil soluble character, Spans will cause
the oil phase to predominate and form an
w/o emulsion.
• High HLB indicates ?
• Emulsifier has a large number of hydrophilic
groups on the molecule thus imparting
hydrophilic Character.
• Tweens have higher HLB numbers, Because
of their water soluble character, Tweens will
cause the water phase to predominate and
form an o/w emulsion.

HLB value & Application
ü 1 ~ 3 Anti-foaming agent.
ü 3 ~ 6 W/o emulsifying agents.
ü 7 ~ 9 Wetting agents.
ü 8 ~ 18 O/w emulsifying agents.
ü 13 ~15 Detergents.
ü 15 ~18 Solubilizing Agents.

Classification of Emulsifying agents
Based on Mechanism of Action:
1) Monomolecular film: To reduce the
interfacial tension Oil droplets are
surrounded by a coherent monolayer of the
surfactant which prevents coalescence. If
the emulsifier is ionized, the presence of
strong charge may lead to repulsion in
droplets and hence increasing stability.
2) Multimolecular film or Hydrophillic Colloids
3) Finely divided solid particles: They are
adsorbed at the interface between two
immiscible liquid phases to form Particulate
film.

Theories of Emulsification:
Many theories have been advanced to
account for the way or means by which the
emulsion is stabilized by the emulsifier.
1) Electric Double Layer Theory.
2) Phase Volume Theory.
3) Hydration Theory of Emulsions
4) Oriented wedge theory.
5) Adsorbed Film and Interfacial tension
Theory

1) Electric Double Layer Theory:
The oil globules in a pure oil and pure water
emulsion carry a negative charge. The
water ionizes so that both hydrogen and
hydroxyl ions are present.
The negative charge on the oil may
come from adsorption of the OH ions.
These adsorbed hydroxyl ions form a layer
around the oil globules. A second layer of
oppositely charged ions forms a layer in
the liquid outside the layer of negative ions.
The electric charge is a factor in all
emulsions, even those stabilized with
emulsifying agents

2) Phase Volume Theory:
It is possible, one sphere can touch 12 others and the
volume the spheres occupy is about 74 per cent of the
total volume.
Thus if the spheres or drops of the dispersed phase
remain rigid it is possible to disperse 74 parts of
the dispersed phase in the continuous phase; but
if the dispersed phase is increased to more than 74
parts of the total volume, a reversal of the emulsion
will occur.
However, the dispersed phase does not remain rigid in
shape but the drops flatten out where they come in
contact with each other, nor are all the dispersed
particles the same, so that it is possible for the
dispersed phase tsame, so that it is possible for the
dispersed phase to consist of from 1 to 99 per cent of
the emulsion.

3) Hydration Theory of Emulsions:
• Fischer and Hooker state that hydrated
colloids make the best emulsifiers.
• Fischer states the emulsifying agent, by which
a permanent emulsion is obtained,"proves to
be a hydrophilic colloid when water and oil
emulsions are concerned
• Fischer and Hooker have found albumin,
casein, and gelatin to be good emulsifying
agents.

4) Oriented wedge theory:
This theory deals with formation of
monomolecular layers of emulsifying agent
curved around a droplet of the internal phase of
the emulsion.
Example:
•In a system containing 2 immiscible liquids, emulsifying
agent would be preferentially soluble in one of the phases
and would be embedded in that phase.
•Hence an emulsifying agent having a greater hydrophilic
character will promote o/w emulsion and vice-versa.
•Sodium oleate is dispersed in water and not oil. It forms a
film which is wetted by water than by oil. This leads the
film to curve so that it encloses globules of oil in water.
•Sodium Oleate Zinc Oleate

5) Adsorbed film and interfacial
tension theory:
Ø Lowering interfacial tension is one way to
decrease the free surface energy associated
with the formation of droplets. Assuming the
droplets are spherical,
ΔF= 6 γV
D
Ø V= volume of the dispersed phase in ml, d is the
mean diameter of the particles.
Ø γ = interfacial tension

Ø It is desirable that:
Ø The surface tension should be be reduced below
10dynes/cm by the emulsifier and it should be
absorbed quickly.

Methods of Preparation Of
Emulsions:
• Commercially, emulsions are prepared in
large volume mixing tanks and refined and
stabilized by passage through a colloid mill
or homogenizer. Extemporaneous
production is more concerned with small
scale methods.
ü Dry Gum Methods
ü Wet Gum Methods
ü Bottle Method
ü Beaker Method.
ü In situ Soap Method.

DRY GUM Method for Preparation Of
Emulsions:
• Dry gum method is used to
prepare the initial or primary
emulsion from oil, water, and a
hydrocolloid or "gum" type
emulsifier.
Dry Gum Methodology
(4 parts oil, 2 parts water, and 1
part Emulsifier).

Procedure:
Ø Take mortar, 1 part gum is levigated with
the 4 parts oil until the powder is
thoroughly wetted; then the 2 parts water
are added all at once, and the mixture is
vigorously triturated until the primary
emulsion formed is creamy white and
produces a "cliking" sound as it is
triturated.
Ø Active ingredients, preservatives, color,
flavors are added as a solution to the
primary emulsion.
Ø When all agents have been incorporated,
the emulsion should be transferred to a
calibrated vessel, brought to final volume
with water.

Wet Gum Method
Methodology
(Oil 4 parts + Water 2 parts + Emulsifier 1 parts)
Procedure: In this method, the proportions of oil,
water, and emulsifier are the same (4:2:1), but the
order and techniques of mixing are different.
The 1 part gum is triturated with 2 parts water to
form a mucilage; then the 4 parts oil is added
slowly, in portions, while triturating.
After all the oil is added, the mixture is triturated for
several minutes to form the primary emulsion.
Then other ingredients may be added as in the
continental method.

Bottle Method
Ø This method may be used to prepare emulsions
of volatile oils, Oleaginous substances of very
low viscosities.
Ø This method is a variation of the dry gum method.
Ø One part powdered acacia (or other gum) is
placed in a dry bottle and four parts oil are added.
Ø The bottle is capped and thoroughly shaken.
Ø To this, the required volume of water is added all
at once, and the mixture is shaken thoroughly
until the primary emulsion forms.

Beaker Method
Ø Dividing components into water soluble and
oil soluble components.
Ø All oil soluble components are dissolved in
the oily phase in one beaker and all water
soluble components are dissolved in the
water in a separate beaker.
Ø Oleaginous components are melted and both
phases are heated to approximately 70°C
over a water bath.
Ø The internal phase is then added to the
external phase with stirring until the product
reaches room temperature.

In situ Soap Method:
Two types of Soaps developed by this
Methods:
1) Calcium Soaps
2 ) Soft Soaps
1) Calcium Soaps: W/O type Emulsions.
E.g. Oleic acid + Lime water.
Prepared by simple mixing of equal
volumes of Oil and Lime water.
ü Emulsifying agent used is Calcium
salt of free fatty acids. E.g. Olive Oil +
Oleic acid (FAA)

Instability in Emulsion:
Ø Emulsions are, by nature, physically
unstable; that is, they tend to separate into
two distinct phases or layers over time.
Ø Creaming occurs when dispersed oil
droplets merge and rise to the top of an o/w
emulsion or settle to the bottom in w/o
emulsions. In both cases, the emulsion can
be easily redispersed by shaking.
Ø Coalescence (breaking or cracking) is
the complete and irreversible separation and
fusion of the dispersed phase.
Ø Phase inversion or a change from w/o to
o/w (or vice versa) may occur. This is
considered a type of instability by some.

Liquid Paraffin Emulsion
Ingredients Qty Category
Liqiuid Paraffin 50ml Luxative
Gaum Acacia 12.5gm Emulgent
Gum Tracaganth 0.5gm Emulgent
Sodium Benzoate 0.5gm Preservative
Vanillin 0.05gm Flavour
Glycerin 12.5gm Humectant/Viscocity builder
Chloroform 0.25ml Preservative
Purified Water 100ml (q.s.) Vehicle

Emulsion SB

More Related Content

What's hot (20)

Viewers also liked (18)

Similar to Emulsion SB (20)

More from Mirza Salman Baig (20)

Recently uploaded (20)

Emulsion SB