Engineering Drawing: Chapter 10 convention in section
17 likes13,670 views
The document discusses conventions for section views and aligned sections in technical drawings. It provides examples of how to represent ribs, webs, spokes, and lugs in section views by omitting or including section lines depending on the cutting plane. It also discusses how to draw aligned sections to avoid misleading impressions and how to draw break lines and dimension broken parts when an object needs to be shortened to fit on a page.
Engineering Drawing: Chapter 10 convention in section
- 1. Chapter 10 Conventional Practice in Section View
- 2. TOPICS Section view representation of rib , web , spoke and lug . Aligned section Conventional break
- 3. Section view representation of rib , web , spoke and lug
- 4. TERMINOLOGY Rib and Web are thin , flat feature of an object that acts as a structural support. Rib Rib Web
- 5. Spoke is the rod radiating from the hub to the rim of a wheel. TERMINOLOGY Rim Spoke Spoke Rim Hub Hub
- 6. Lug is an ear which is built as portion of an object for attachment. TERMINOLOGY
- 7. Lug is an ear which is built as portion of an object for attachment. TERMINOLOGY
- 8. CONVENTIONAL PRACTICE Omit the section lines on the section view of Rib , Web and Lug , if the cutting plane is passed flatwise through. Spoke , if the cutting plane is passed longwise through.
- 9. EXAMPLE : RIB Normal multiview drawing Normal section view Section view drawing with convention
- 10. EXAMPLE : WEB : flatwise cut Normal multiview drawing Normal section view Section view drawing with convention
- 11. EXAMPLE : WEB : crosswise cut
- 12. EXAMPLE : WEB : multiple section view
- 13. EXAMPLE : SPOKE Misleading impression
- 14. EXAMPLE : LUG
- 15. Aligned Section
- 16. DEFINITION Aligned section is a section view that is drawn by imaginary rotating the object’s features appeared in a principal view about symmetry axis
- 17. Example : Hole Gives the impression that this holes are at unsymmetrical position.
- 18. Example : Hole
- 19. Example : Rib
- 20. Example : Ribs & Holes
- 21. Example : Aligned section of keyway Example : Spoke & Keyway
- 22. Example : L ug
- 24. CONVENTIONAL PRACTICE For long objects that have to draw in a small scale to fit them on the paper, it is recommended to remove its long portion (which contains no important information) and draw the break lines at the broken ends.
- 27. STANDARD BREAK LINES Rectangular cross section Wood Metal Cylindrical cross section Tubular cross section
- 28. TO DRAW CYLINDRICAL BREAK R R/3 R/3 30 o 30 o
- 29. TO DIMENSION A BROKEN PART Typical dimensioning method not to scale dimensions 800 16 16 800