EP-Analytics Energy Performance Analytics
0 likes342 views
The document outlines Yokogawa's EP-Analytics solution, which aids in implementing ISO 50001-based energy management systems. It features energy calculations, user-specific dashboards, and alarms to notify users of abnormalities, enhancing the efficiency and sustainability of energy management. BSI has confirmed that EP-Analytics supports compliance with the ISO 50001:2011 standard, providing tools for energy performance visualization and optimization.
EP-Analytics Energy Performance Analytics
- 1. Bulletin 43G01C20-01EN www.yokogawa.com Solution Implementation Services® Drive your Energy Management Effectively and Sustainably Key features Assists ISO50001 International Standard based Energy Management •Assist ISO50001 based energy management •Perform accurate energy calculation by Visual MESA EP-Analytics model •Provides suitable Dashboard for each user •Detects abnormality and notifies users with alarms and emails •Assist resolving abnormalities quickly by providing drill down capabilities As a calculation engine, EP-Analytics adopts Soteica Visual MESA’s rigorous energy calculation software based on the Visual MESA simulation engine. Since EP-Analytics calculation model has the common base with Visual MESA EM-RTO(Real Time Optimization) , EP-Analytics can be upgraded to Visual MESA EM-RTO. Energy management System (EnMS) Quote from Figure-1 of ISO50001:2011E ISO50001 International Standard specifies energy management system (EnMS) requirements. Based on ISO50001, an organization can develop and implement an energy policy and establish objectives, targets and action plans. The key points is to drive both management PDCA and operational PDCA. EP- Analytics has functionality to assist ISO based Energy Management. BSI*1 assessed the EP-Analytics software scope and functionality with regard to key requirements of ISO50001:2011E Standard. BSI confirms that it is fairly represented in the report*２ that users of Yokogawa’s software can reliably visualize the data produced by the software to support the conformity with ISO50001:2011E. Energy Performance Analytics EP-Analytics Expandable Solution from Visualization to Optimization *1 British Standards Institution *2 Functionality of EP-Analytics to assist users in operating and managing the ISO50001 Energy Management System (ADV-SOL-14-103 Rev.3)
- 2. Energy Performance Analytics EP-Analytics Energy Dashboard Visual MESA EP-Analytics Model Alarming Drill down Energy Dashboard shows energy data in various form of Web parts such as various type of charts, gauge, table and graphical image. EP-Analytics provides suitable Energy Dashboard for several types of users to meet their energy management purpose. EP-Analytics is powered by a model based calculation engine which is Soteica rigorous energy calculation software based on the Visual MESA™. It calculates EnPIs(Energy Performance Indicators), mass balances and other energy related data, and has capabilities of Data Validation, Energy Balance and Mass Balance. Sensor data is validated by comparing data with the maximum and minimum limits. Energy balance is calculated based on the energy consumption within boundaries such as each plant or equipment. Mass balance is calculated based on balance error of energy source such as steam, electricity and fuel. When an EnPI value exceeds the limit, an e-mail is sent to notify the alarm. Conditions of alarm limit are High, HH(HighHigh), Low, LL(LowLow) and deviation from a target value. Alarms are logged to internal database and can be shown on a screen by alarm list. Drill down is used to pursue the abnormality when alarm comes out. By clicking a bar or a line in column or line chart, a lower layer chart linked to the bar is displayed. By clicking a hot spot or a value label in graphical screen, a lower layer graphical screen is displayed YOKOGAWA ELECTRIC INTERNATIONAL Pre Ltd 5 Bedok South Road, Singapore 469270, Singapore Tel:65-6241-3700 Fax:65-6241-9919 URL: http://www.yokogawa.com/sg/ YOKOGAWA ELECTRIC CORPORATION World Headquaters 9-32, Nakacho 2-chome, Musashino-shi, Tokyo 180-8750, Japan Tel: 81-422-52-8824 Fax: 81-422-52-7048 URL: http://www.yokogawa.com/