![Product realization processes:
- Market analysis
- Product design
- Verification
- Validation
- Product release
- Order processing
- Product delivery
- Customer satisfaction
- Continual improvement
Identification of process interactions
Analyzing system and product realization processes, the management team concluded
that virtually all system processes are interrelated. For example, management review may
receive inputs from corrective actions, communication, internal audits, etc. Internal audit
process receives inputs from all processes within the company and provides feedback or
input into all those processes.
Product realization process was found to be more linear than system processes. For
example, results of the market analysis initiate product design. Product design leads to
verification. If verification is successful, validation of the product takes place. Validation
of the product results in product release and finally communication regarding availability
of the product. Customer satisfaction and continual improvement close this sequence with
a possibility of providing inputs into Product delivery, Order processing, Product release,
etc.
To document process interactions, the company elected two tools. The first, top-level
definition of the process interaction was documented in the Process Interaction Matrix
shown in Figure 1 (see links below). The second tool was a well-known technique of
flow-charting for those processes that required graphical illustration.
Afterword
Use of the Process Interaction Matrix at Quality Works proved that it is a helpful concise
method of defining and documenting interaction of processes for an ISO 9001:2000
quality management system. Based on our experience, we also realized that the same
matrix might be successfully used for other standards requiring definition of the
interaction of the processes, such as ISO 13485:2003, ISO/TS 16949 [3] and others.
Acknowledgments
The author would like to express his gratitude to Maria Allen, the President of Quality
Works, for her willingness to conduct and publish this case study.](https://image.slidesharecdn.com/exampleofiso9000-110316221812-phpapp02/85/Example-of-iso-9000-2-320.jpg)
![References
[1] ISO 9001:2000 Quality management systems - Requirements
[2] ISO 13485:2003 Medical devises - Quality management systems - Requirements for
regulatory purposes
[3] ISO/TS 16949 Quality management systems - particular requirements for the
application of ISO 9001:2000 for automotive production and relevant service part
organizations.
If you want to download over free 50 ebook for iso 9001 standard, you can visit:
http://iso9001ebooks.info
Best regards](https://image.slidesharecdn.com/exampleofiso9000-110316221812-phpapp02/85/Example-of-iso-9000-3-320.jpg)
Example of iso 9000
- 1. Example of iso 9000 Introduction One of the requirements of ISO 9001:2000, specified in the paragraph 4.2.2 c), requires a company to develop a quality manual that, among other attributes, shall contain "a description of the interaction between the processes of the quality management system." Through my experience, as a professional auditor, with dozens of companies around the world, I found that very few businesses had developed practical approaches to address this requirement. Attempts to document process interactions range from busy and hard to read flow charts to establishing cross-reference tables in the quality manual. I observed one of the best tools to address process interaction requirement at Quality Works, a small on-line publishing company. Initiation of the project Quality Works, a small Internet-based publishing company, has set a goal to establish compliance with ISO 9001:2000 standard. The Management Team assigned the company's Business Manager to develop and implement documentation to address new requirements of the standard. While most of the new requirements were simply addressed through preparation of the corresponding procedures and work instructions, documentation of the interaction of the processes created some difficulties. Attempts to document interaction of processes through traditional flow-chart resulted in a hard to read busy document that did not impress the management team. Brainstorming To address this issue, the management group conducted a brainstorming session to search for a new tool. The group determined that there were two types of the processes: processes related to product realization and processes related to the management system as follows: Business management processes: - Documentation management - Management review - Internal audit program - Non-conformity and Corrective & Preventive Action (NC-CAPA) System - Communication - Resource management - Record management - Information technology
- 2. Product realization processes: - Market analysis - Product design - Verification - Validation - Product release - Order processing - Product delivery - Customer satisfaction - Continual improvement Identification of process interactions Analyzing system and product realization processes, the management team concluded that virtually all system processes are interrelated. For example, management review may receive inputs from corrective actions, communication, internal audits, etc. Internal audit process receives inputs from all processes within the company and provides feedback or input into all those processes. Product realization process was found to be more linear than system processes. For example, results of the market analysis initiate product design. Product design leads to verification. If verification is successful, validation of the product takes place. Validation of the product results in product release and finally communication regarding availability of the product. Customer satisfaction and continual improvement close this sequence with a possibility of providing inputs into Product delivery, Order processing, Product release, etc. To document process interactions, the company elected two tools. The first, top-level definition of the process interaction was documented in the Process Interaction Matrix shown in Figure 1 (see links below). The second tool was a well-known technique of flow-charting for those processes that required graphical illustration. Afterword Use of the Process Interaction Matrix at Quality Works proved that it is a helpful concise method of defining and documenting interaction of processes for an ISO 9001:2000 quality management system. Based on our experience, we also realized that the same matrix might be successfully used for other standards requiring definition of the interaction of the processes, such as ISO 13485:2003, ISO/TS 16949 [3] and others. Acknowledgments The author would like to express his gratitude to Maria Allen, the President of Quality Works, for her willingness to conduct and publish this case study.
- 3. References [1] ISO 9001:2000 Quality management systems - Requirements [2] ISO 13485:2003 Medical devises - Quality management systems - Requirements for regulatory purposes [3] ISO/TS 16949 Quality management systems - particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations. If you want to download over free 50 ebook for iso 9001 standard, you can visit: http://iso9001ebooks.info Best regards