FIMI_X8_SE_2022_V2_User_Manual_V3.0.2_EN.pdf

FIMI X8 SE 2022 User Manual
Please read the user manual carefully before using and keep the manual for future reference.

Services & Support
Package List
Product Instruction
Drone
Safety and Protection
Intelligent flight
Assembly and Disassembly
Smart battery
Gimbal and Camera
Remote controller
APP
Fly
Maintenance and Calibration
Basic Specification
Contents
·1
·2
·3
·6
·
7
·8
·13
·13
·16
·18
·22
·25
·27
·29

1
Services & Support
FIMI provides X8 SE 2022 users with tutorial videos and
the following information：
1. FIMI X8 SE 2022 User Manual
2. FIMI X8 SE 2022 Quick Start Manual
3. FIMI X8 SE 2022 Disclaimer and Safety Operation Instructions
Users are advised to watch tutorial videos before using the product and read
FIMI X8 SE 2022 Disclaimer and Safety Operation Instructions carefully and get
to know the process of using by going through FIMI X8 SE Quick Start Manual.
For more detailed product information, please refer to FIMI X8 SE 2022User Manual.
Please download the firmware and watch the tutorial videos on the link
https://www.fimi.com/fimi-x8-se-2022.html
4. Please scan the the following QR-code to download Fimi Navi 2020 App
The FIMI X8 SE 2022 is an aerodynamic foldable drone
equipped with intelligent control, wireless communication
and other advanced technology which are necessary to
realize functions like long-distance remote control, intelligent
flight, precise landing, etc. The built-in 3-axis gimbal stabilizes
the camera which is able to shoot 4K video at 30 fps and
which performs HD real-time image transmission. The
APP enriches the remote controller with more features
and fast connection. The remote controller fits iPad Mini
at the maximum range. The sticks are detachable.
Product Instruction
Operation prohibited
Operation, Usage tips
Important notes
Glossary,Reference Information
Reading tips（Symbol description）

2
Package List
Remote controller x 1
Drone x 1
AC cable x 1 Instructionx 2
Battery x 1
使用产品前请仔细阅读本快速入门指南，并妥善保管
FIMI X8 SE 无人机快速入门指南
Positive propeller x 3
Reverse propellex 3
Charger x 1 Dustproof plug x 1
USB cable x 3
Gimbal protector x 1

3
Product Introduction
1 Drone
Integrated gimbal camera
Power button
Flight status lights
Reverse propeller
Battery level lights
Positive propeller
Drone tail light
Motor
Landing gear 12-PIN Data interface
Optical flow camera
Battery buckle
TOF sensor
Fill-in light

4
2 Remote controller
Power button
Auto take-off/land button
Flight mode/auto return
Left stick
Stick storage slot
Five-directional button
Mobile device holder
Charging port
Right stick
Battery level lights
Cable slot
USB port
Right dial
Antenna
Left dial Record button Shoot button

• The other functions of the five-directional button can be set in the FIMI Navi 2020 App.
• The joystick function is the default mode, which can be set through the FIMI Navi 2020 App.
5
Function Introduction of RC
Buttons Function description
Left stick
Push stick upward, the drone goes up; pull stick downward, the
drone goes down; toggle stick to left, the drone rotates counter-
clockwise; toggle stick to right, the drone rotates clockwise
Right stick
Push stick upward, the drone flies forward; pull stick downward,
the drone flies backward; toggle stick to left, the drone flies to
left; toggle stick to right, the drone flies to right
Auto return
Five
directional
button
Toggle the button to the left, switching to normal flight
Toggle the button to the right, switching to auto return
Power button
Short press to view the battery level
Short press+long press 2 seconds to power on / off
long press 2 seconds to auto take off/landing
Auto take-off/land button
short press to start / stop shooting
Shoot button
Short press to start /stop recording
Default to switch between map / FPV
Default to switch between gimbal center/down
Default to turn on / off battery info interface
Default to turn on / off self-checking interface
Default to turn on/off media library
Adjust the pitch angle of gimbal
Adjust the value of EV / ISO
Record button
Left dial
Right dial
Up
Down
Left
Right
Center
1
2
3
4
5
6
7
8
9
10
The stick mode can be set in FIMI Navi app (the default is American hand).
Forward
Drone heading
Up
Right
Down
Left
Backward
Up
Down
Forward
Backward
Counter-
clockwise
Clockwise Left Right
Left stick Right stick

6
Drone
Flight Mode
GPS Mode
To achieve precise hovering, the drone is equipped with a GPS module.
The intelligent flight function works in GPS mode. Users can enable Sport
Mode or Beginner Mode in the flight settings. When the Beginner Mode is
on, the flight speed, flight distance, flight altitude and RTH altitude will be
limited. In sport mode, the maximum flight speed is 18m/s(65 km/h), the
maximum ascending speed is 5m/s(18 km/h), and the maximum descending
speed is 4m/s(14 km/h).
VPU Mode
An Optical Flow module is also built into the drone for precise hovering and
landing at the home point. In VPU mode, the Intelligent flight function is
not supported. The maximum flight speed is 10m/s(36 km/h), the maximum
ascend speed is 3m/s(11 km/h), and the maximum descending speed is
2m/s (7 km/h). When the drone is flying above a well-lit ground with a clear
texture and the GPS signal is poor, it will switch automatically to VPU mode.
ATTI Mode
When the GPS signal is poor or the compass has interference, the drone
enters in ATTI mode. In this mode, the drone can start drifting horizontally
and intelligent flight mode is not supported. Therefore, in case of any accidents,
we recommend flying in an open area with good GPS signal reception. Once
the drone enters in ATTI mode, please land in a safe place as soon as possible.
Drone Lights
red green
yellow
Drone heading
Drone lights
All lights are fading in and out
All lights flashing twice
All lights are flashing quickly
The red and green flashing quickly
Fill-in light Automatically/manuallyopened
All lights are on
The yellow lights are on and the red and
green light is flashing at regular intervals
Drone status
Self-checking
Low battery alerts
Verylowbatteryalert:landassoonaspossible
The firmware of the drone is updating
Drone on the ground: self-check fails
Drone is flying: internal error
Ready to fly / in flight
1
2
3
4
5
6
7
Sport Mode will not be available when the drone is over 2400 meters above sea level.

7
Safety Protection
Failsafe Return
Failsafe return is only supported in GPS mode. When the drone and remote
controller signal is interrupted for more than 2 seconds, the flight control
system built into the drone will take over the control of your drone, plan the
return path according to the original flight path, then the drone will fly back
and land at the home point. This function works precisely if there are enough
GPS satellites are locked, the compass has no interference and the home point
has been recorded correctly. If the wireless signal reconnects during the failsafe
return, the pilot can turn off App return hint or toggle Auto Return switch to the
left again to cancel, and the drone will hover at the current position.
home point
home point
current altitude≥return altitude
ascend first
( the default altitude is 30m)
current altitude<return altitude
Low-power Protection
In flight, when the battery level is only enough for RTH, App advises users
to return, and the drone will return automatically after 10 seconds countdown.
When the battery level is only enough for landing, App advises users to land
as soon as possible, and the drone will land automatically after 10 seconds
countdown. When the battery level is at 10% usage left, the drone will be
forced to land.
Hovering on the Edge of No-fly-zone
The drone will automatically hover in the restricted flight area designated by
the state, such as the edge of airports, and the App will appear corresponding
hints. The user can use sticks to fly the drone from the edge of the no-fly-zone,
but the drone will not enter the no-fly-zone.
critical low battery
landing battery level
normal battery level
low battery
current battery level
RTH battery level
15%
10%
0% 30%
100%
hover
No-fly-zone

8
Intelligent Flight
Auto Take-off
When the conditions are right, press Auto Take-off/Landing button for 2
seconds to take off. In GPS mode, the drone will take off to an altitude of
4 meters and hover for sticks control. In VPU mode, the drone will take off
to an altitude of 1.2 meters and hover for sticks control.
Auto Landing
When the conditions are right, press Auto Take-off/Landing button for 2
seconds to land vertically.
Altitude
altitude ＜3m
distance＜10m
altitude ≥3m
distance＜10m
altitude ≥30m
distance≥10m
altitude ≤30m
distance≥10m
Distance
30m
3m
10m
home point
Auto Return
When the drone is in flight, the user can toggle the auto return switch to
the right to return the drone. When the return distance is less than 10
meters and flight altitude is less than 3 meters, the drone will ascend to
3 meters first and return to the home point; if the flight altitude is greater
than or equal to 3 meters, the drone will directly return to the home point.
When the return distance of the drone is greater than or equal to 10 meters
and the flight altitude is less than 30 meters, the drone will ascend to 30
meters and return to the home point; if the flight altitude is 30 meters or
more, the drone will directly return to the home point . The user can toggle
the Auto Return Switch to the left to exit.
GPS Mode VPU Mode
4m
1.2m
Users can short press the auto take-off/land button to exit intelligent flight.

9
Smart Track
Smart Track is supported only in GPS mode. The user can choose Trace,
Profile, or Lock in the App menu. The drone will trace the subject chosen
at the App interface at a distance.
In Trace mode, the heading will always lock at the target and trace it from the back
at a distance.
In Profile mode, the heading will always lock at the target and trace it from the
side at a distance.
moving direction
heading
moving direction
drone moving direction
heading
camera tracking 360°
flight speed =0m/s
flight speed = 0m/s
In Lock mode, the drone will hover at a place if flight speed is 0, following the
target 360°. The user can also adjust flight speed, and the drone will fly around
the target at a certain distance.
In Smart Trace, users should always make sure to avoid people, animals and bstacles
in the tracking path to ensure the flight safety. Users should comply with local laws and
regulations when using the function.

10
Dronie
The user can select Dronie,including Rocket and Invert,in the App. In Rocket
mode, the drone flies upward with the camera pointing downward at the
subject to shoot a video. In Invert mode, the drone flies backward and upward
with the camera locking at the subject to shoot a video.
Drag a rectangle around a POI
Set flight speed and altitude, the flight control center will estimate flight time
automatically
The drone automatically adjusts its place
3 seconds count down to fly away to shoot a video once the drone completes
adjustment
Orbit
The user can select Orbit mode in the App. when a central point and a radius
are set, the drone will fly around the central point at a default speed. If a
point of interest is set, the camera will be locked at the POI.
Fly to a central point to set the central point
Fly away from the central point to set radius
Set flight speed, move direction and heading. If the heading is free,the user can
drag a rectangle around a POI
If sticks are moved in flight, the flight altitude or radius will be changed. Taking
Mode 2 as example:
POI
Central point
Tap-fly
The user can select Tap-fly in the App. Tap map to choose a destination
and set flight speed, the drone will fly over there at a default speed in a
straight line. If a point of interest is set, the camera will be locked at the POI
Tap map to choose a destination
Switch to image interface to drag a rectangle around the POI
Set flight altitude and speed
POI
drone destination
Ascend
Descend
Radius zoom out
Radius zoom in
Counter-
clockwise
Clockwise Direction&Speed Direction&Speed

11
pitch: -90°
target
fly vertically upward
0°< pitch<90°
target
fly backwards and upwards
Rocket Invert
Spiral Mode
The user can select Spiral Mode in the App. Set the central point and
radius, the drone will spirally fly upward and shoot a video simultaneously,
showing a sense of space.
Fly to a point to set as the central point
Fly away the central point to set radius
Set spiral direction and flight distance to start and shoot a video at the same time
The mission interrupted if the user moves sticks
central point
radius
Course Lock
The user can select Course Lock mode in the App. The drone saves current
fly direction as heading. The user can control sticks to adjust direction of
head and gimbal, but the forward direction remains unchanged.
Tripod Mode
The max speed of the drone is 1m/s, and the max rotation speed is 60°/s.
In Tripod Mode, operation sensitivity is lowered simultaneously to shoot
more stable and smooth video.
Aerial Mode
The brake distance is lengthened and the angular speed of rotation is
limited to make sure the shooting videos are more stable and smooth
Note: Course Lock is enabled in Aerial Mode, Users can turn it on in the APP
SAR Mode
The user can select SAR Mode in the APP. With real-time GPS coordinates,
the drone could help user to search and rescue.
Image interface: show real-time coordinate and time of the drone, support digital
zoom, screen shots to share online
Map interface: show real-time coordinate and time of the drone in ordinary map
and satellite map, screen shots to share online

12
Waypoint
Choosing waypoint and drawing route both are available at map. The drone
flies along waypoint route at a default speed. If a point of interest is set,
the camera will be locked at the POI. The user can select a way to set
waypoints, including choosing points in flight or on the map, historial routes.
Choosing points in flight:
1. control the drone to a point to set as a waypoint
2. using sticks to set flight altitude and heading direction, dials to set gimbal angle, and
actions when reaching the waypoint
3. when all waypoints ready, please set waypoints routes attribute, incuding flight speed,
heading direction, action at the destination
4. POI is enabled when executing waypoints
Choosing points on the map
1. tap map to add waypoint
2. set waypoint attribute, including flight altitude, action at the destination, rotate direction
3. drag the POI icon to the map, and set its a;titude and relate waypoints
4. when all waypoints ready, please set flight speed, failsafe action, and action at the
destination
5. POI is enabled when executing waypoints
POI
Waypoint
heading
Precise Landing
In the process of Return to Home, the optical flow sensor will match landing
pad features above the home point. Once matched successfully, the drone
will land on the landing pad precisely.
Fix-wing Mode
In Fix-wing Mode, the drone can only fly forward, not backward. The user can use
sticks to control flight speed and course as showed below (America Mode).
Left stick
Right stick
push upward
push downward
toggle left
toggle right
push upward
push downward
toggle left
toggle right
down
up
turn left
turn right
accelerate
decelerate
turn left
turn right
Historical routes
1. preview the waypoints and its attribute by entering Favorite list
2. tap to start and show the real-time waypoints trace
Please enable precise landing in the app before use it.

13
Battery
The intelligent battery of FIMI X8 SE 2022 has a capacity of 4500mAh,
a voltage of 13.05V. This type of battery employs high energy cell,
advanced battery management system, and charge and discharge
functionality.
Assemble and disassemble
Push hard the battery, after the battery is installed in place, there will be a
"click" sound.
To remove the battery, you need to press the battery buckle on both
sides of the battery to pull out the battery.
Assembly and Disassembly
Propellers
Unfold the front and rear arms of the drone.
Attach the gray marked propellers to the motor mounting base with gray marks
on the arms.
Ensure the propeller is pressed to the bottom of the mounting base.
Rotate the propeller to the end of the lock direction until the propeller gets
bounced and locked.
Press the propeller forcefully and rotate the propeller along the unlock direction
to remove the propeller.
If the propeller is damaged, please replace them to ensure flight safety and efficiency.
Check if the propeller is properly installed and fastened before each flight.Stay away
from the rotating propeller to avoid cutting.
Take the installation of reverse propeller as an example.

14
Drone Micro SD card
When installing SD card to the drone,please unfold the arms of the drone
first and open the protection cover
Insert the SD card with the head side facing upward into the SD card slot
When removing SD card, press the SD card to pop it out
Note:Support Micro SD ( U3 and above ) 8 ~ 256GB, recommend to use
Sandisk Extreme Pro V30 32G
Sandisk Extreme V30 32G
Samsung Pro Endurance 32G
Lexar Professional 1000X 32G
Sandisk Extreme Pro V30 64G
Sandisk Extreme V30 64G
Toshiba Exceria Pro 64G
Megaphone module
Install the megaphone module as the indicated
direction，there will be a "click" sound.
After the installation is successful, the corresponding icon will appear on
the APP, click to set the relevant settings.
Press the lock on the tail of the module and push out the module to
remove it from the drone.

15
Charging
Connect the battery,charger and AC cable as shown below, and
plug the charger into a power outlet
When the battery is in charge, the battery level lights are flashing
When the battery is fully charged, the battery level lights go out
It takes about 2 hours to fully charge the battery
Turning on and off
Short press+long press power button 2 seconds to power on/off
Short press to check battery level
• After the flight, the battery temperature is high, so wait for the battery to drop to room
temperature or wait for the battery to stand still for 30 minutes before charging.
• The optimal charging temperature range of the smart battery is 25±3℃, and charging
within this temperature range can prolong the battery life.
• Recharge and discharge every 3 months or so to ensure battery activity.
• The smart battery must be charged with the official Femto charger.FIMI will not take any
responsibility for all consequences.
For safety reasons, smart batteries need to be kept low (such as below 50%) during
long-distance or long-term transportation

16
Gimbal and Camera
Camera
The camera, equipped with 1/2.0 inch CMOS and wide-angle lens
with 25mm equivalent focal distance, It also comes with various
shooting modes, inculding single, burst, time lapse, panorama shot
and slow motion, for different scenario.
Equip and remove the gimbal protector
Equip and remove the gimbal protector as shown
.

17
Gimbal
FIMI X8 SE 2022 combines a light weight 3-axis mechanical gimbal
with the latest professional control algorithms and ±0.005°
control accuracy, which provides a stable shooting platform for
camera. The pitch axis, default to tilt from 0°to -90°, can be
adjusted by left dial of remote controller or App.
FPV Mode:
The roll axis rotates with the drone to provide
a first person view
-90°
0°
Horizon
Parallel
Follow Mode:
The roll axis does not move with the drone
and always keep the gimbal horizontally,
which suits for shooting stable videos
Operating Mode

18
Turning on and off
Short press+long press power button 2 seconds to power on/off
Short press to check battery level
Remote controller
With ergonomic design, it is easier and more precise to control.
There is no complicated operation to connect App, just plug
in and it works. The remote controller fully charged can work
about 4.5 hours.
5V 2A
Charge
.
.
.
.
Connect the remote controller to a power adapter as show below
When the RC is in charge, the battery level lights are flashing
when the RC is fully charged, the battery level lights go out
It takes about 2.5 hours to fully charge the RC in the powered off condition

19
Assemble Device Recording and Photo Shooting
Tighten the mobile or pad on mobile device holder by extending the holder
to the left.
Open the interface protection cover on the RC bottom.
Connect your phone and the RC with a USB cable.
Connect the drone and update firmware according to instructions in Fimi
Navi 2020 app.
Note: The cable slot is reserved on the right side of the RC.
Press the shoot button to take a photo. A photo is taken when you hear 2
short sounds.
Press the record button to record video. Recording starts when you
hear 2 short sounds. Press again to stop recording with 4 short sounds.
The pitch angle of the gimbal can be controlled by toggling the left dial
up and down.
The right dial can adjust EV/ISO.
Record button
Shoot button

20
Shortcut Buttons
Push the five-directional button up default to access map or FPV
Push the five-directional button down default to gimbal center or down
Toggle the five-directional button left default to turn on/off battery info interface
Toggle the five-directional button right default to turn on/off self-check interface
Press the five-directional button center default to turn on/off media
Toggle the auto return button to the right when the drone is in flight, the drone will
return to the home point.
In the process of auto return, toggle the auto return button to the left, the drone
will hover at place and wait for sticks instructions.
When auto take-off/land button turns white, it can be pressed to take off or land
When the drone meets auto take-off conditions, long press 2 seconds to take off
When the drone meets auto land conditions,long press 2 seconds to land
When the drone is executing intelligent flight, short press this button to exit
Right dial to adjust EV/ISO value
Left dial to adjust pitch angle of gimbal

Remote Controller Pairing
When a new remote controller or drone is replaced, please pair
the remote controller and the drone again as shown below：
Turn on the drone
Turn on the RC, long press the power button 15 seconds until hearing
constant beep sound，and the power button red light flashes
Short press the code pairing button on the drone , the yellow light on the drone
goes out
The code pairing succeeds when the power button on the RC turns white
and the yellow light on the drone keeps on
21
Sticks Control
Mode 1
Mode 2
Forward
Backward
Up
Down
Counter-
clockwise
Up
Down
Forward
Backward
Counter-
clockwise
Mode 3
Forward
Backward
Up
Down
Counter-
clockwise
Clockwise
Left Right
Remote lights
This 5 pin port is only for updating firmware, but X8 SE Drone is auto equipped
with auto update function. So there is no need to use this 5 pin port.
Remote status
Not connected to the drone
Auto take-off or landing not enabled
Ready for auto take-off
Normal signal
RC Pairing or upgrading firmware
Recording videos
1
2
3
4
5
6
7
Remote lights
Power button's red light flashes
Power button's red light are on Weak signal
Power button's white light is on
Power button's red light flashes
Power button's white light flashes
Auto take-off/landing button's red light is on
Auto take-off/landing button's white light on

22
APP
Download and install Fimi Navi 2020 app, register a FIMI user
account before login, and select FIMI X8 SE 2020 to enter device
Image Interface
1. Real-time Flight Parameters
：
Tap to return to the home screen.
：28.8m: vertical flight altitude from the home point
：32.8m: horizontal distance from the home point
VS1.23m/s: vertical speed
HS1.80m/s: horizontal speed
: Estimated landing battery
: Estimated RTH battery
2. Drone Status
In flight: current flight status
GPS: current flight mode,including GPS，
VPU，ATTI
: drone real-time power
3. Signal Status and General Settings
: showGPSsignalstatus,0-6indicatespoorwithred;7-12indicatesgoodwith yellow;
13 and above indicate excellent with white. Tap to enter flight control settings
: show image transmission signal strength
: show the RC signal strength, tap to enter RC setting
: show real-time battery level, tap to enter battery settings
: tap to enter settings
: Real-time estimated flight time
GPS
1
4 6
5
7
2 3
10
8
9

23
4. Map Interface
: Displays the drone head orientation, tilt angle, remote control position and other
information. Click to switch the map to display the aircraft in real timeLocation
5. Metering Mode
tap any place in the image interface for metering, when appearing exposure lock
button, click to lock the value.
6. Gimbal and Image Parameters
：Show the the current zoom multiple
：Show the current gimbal angle
：Show the current EV value
：Camera parameter settings, tap to set EV,ISO,shutter,video or photo mode,
resolution, video size, white balance, etc.
：Show the capacity of SD card and its residue
: Megaphone
7. Camera Operation Area
3:26 ：Video record length
：Camera parameter settings, tap to set EV,ISO,shutter,video or photo mode,
resolution, video size, white balance, etc.
：
Tap to switch between photo and video record
：
Tap to start/stop shooting photos or record videos
：Media library, tap to download or preview videos and photos saved in Micro
SD card
8 Intelligent Flight
Tap to enter intelligent flight interface
：Auto Take-off
：Auto Landing
：Auto Return
：Waypoints
：Smart Track, including Trace, Profile, Lock
：Orbit
：
Tap-fly
：Dronie,including Rocket and Invert
：Spiral Mode
：SAR Mode
：Aerial Mode
：
Tripod Mode
：Course Lock
：Fix-wing Mode
4K/30

24
Map Interface
9 Drone gear mode
：Display the current aircraft gear mode, click to switch between“Sport”
“Normal”“Cine”mode
Sport：Max horizontal speed 18m/s, Max ascent speed 5m/s, Max descent
speed 4m/s
Normal：Max horizontal speed 10m/s, Max ascent speed 4m/s, Max descent
speed 3m/s
Cine：Max horizontal speed 6m/s, Max ascent speed 1.5m/s, Max descent
speed 1.5m/s
：
Tap to auto takeoff.
：
Tap to auto land the drone.
： Tap to return the drone.
10.Shortcuts
：
Tap to center the drone.
：Display the location of the drone.
：Switch the map.
：Home point.
：
Tap to correct the direction.
：Display the location of the Home.
：Display the location of the phone.

Fly
Confirm the drone heading
The direction of integrated gimbal camera is the drone heading.
Once the drone is turned on, the heading can be told by navigation
lights.
The red light and the green light indicate the heading,and the yellow light
is the tail.
Make sure the battery of the aircraft and the remote control are fully charged.
Make sure that the propeller is installed correctly and that the propeller is
not damaged or deteriorated.
Make sure the camera lens is clean.
Make sure the SD card is inserted.
Make sure the front and rear propellers are extended in place
Whether the camera and gimbal work normally after powering on
Make sure the FIMI Navi 2020 is running normally
Always keep the tail pointed at the user to avoid direction misjudging.
red green
yellow
Drone heading
25
Left stick Right stick Left stick Right stick
Manual take off
Pre-flight inspection
Keep both sticks to the bottom inner still over 3 seconds, the propellers
start spinning
Release both sticks once propellers have been spinning, and firmly push
the left stick upward to take off the drone
During flight, release both sticks to hover
At any time during controlled flight, release the sticks and the drone will hover
automatically

26
Flying Condition Requirement
1. The drone is suitable for people above 18 years who have full civil capacity.
2. Make sure to keep some distance from people, animals, trees, vehicles
and buildings while using the drone. Please be careful when someone
approaches.
3. Keep away from airports, railways, highways, high-rise buildings, utility
poles and other dangerous environments when operating the drone.
4. Keep away from the areas with complex electromagnetic signals such
as communication base stations and high-power antennas when
operating the drone.
5. The flight altitude and distance of the drone corresponding to the take-
off point will be limited based on relevant regulations and policies.
6. Do not use this product at the place and time prohibited by regulations and
policies.
7. To protect the legitimate rights and interests of users, please follow the
product safety instructions when using.
8. Do not operate the drone in bad weather such as strong winds, rain, snow,
or fog.
9. Please operate the drone in a broad place with a good GPS signal.
10. It is suggested that user should make the first flight under the guidance
of an experienced pro.
Manual take landing
Stop propellers in an emergency
Slowly move the left stick downward to
land the drone
Once the drone has landed, push and
hold the left stick down over 5 seconds,
the motors will stop
Safety tips: The drone has no waterproof function. Please be careful of landing environment.
Do not land on an inclined plane for safety.
Do not do the above operation during normal flight to avoid motors being stopped in the air.
When motors can't properly turn off, please toggle the left stick to the
bottom inner in maximum range, and press Auto take-off/landing button
for 5 seconds simultaneously, the motors will stop.

Maintenance and Calibration
Remote Controller Calibration
Please try to calibrate the remote controller when you detect
inconsistencies between stick control and drone flying.
Select "RC Calibration" in the remote controller menu
Tap" Start" to calibrate the center, do not move sticks
Skip to sticks calibration once the center calibration succeed
Skip to dial calibration once the sticks calibration succeed
Please turn off the power of the drone before calibrating the remote controller.
RC calibration is not available in flight
Compass Calibration
If the magnetic field changes, the compass needs to be recalibrated
to ensure flight safety. If the drone's compass needs to be calibrated,
the App will give corresponding hints and guidance. After entering
the flight control menu, please select "compass calibration", and
then calibrate based on prompts on the App.
Please connect the drone before calibration. Compass calibration is not
available in flight.
27
Gimbal Calibration
Click "gimbal calibration" and enter the calibration page in
the gimbal settings menu.
After the drone is placed smoothly, click to start calibration.
Do not move the drone during the calibration process.
After the calibration is completed, the App interface shows
"Calibration succeed".
If the App interface shows "Calibration failed", please recalibrate.
Gimbal calibration is not available in flight.
Propellers Maintenance
Propellers are wearing parts. When they're damaged, replace
them in time to ensure flight safety and efficiency.

28
Battery Maintenance
Do not throw the battery into fire; Do not batter the battery;
Lithium battery's capacity reduces significantly in low temperature
conditions. Do not use the battery when it is below 5 degrees.
Do not place the battery under the burning sun.
Gimbal Maintenance
The gimbal of X8 SE 2020, integrated with the drone, does not
need to disassemble. Please be careful not to scratch the camera
when store the drone. Please keep the camera clean for better
image quality.
Drone Self-check
The drone enters the self-check when the drone is powered
on. If the self-check failed, App will pop up corresponding
hints.
Firmware Upgrade
Please check the firmware version regularly, new version will
be pushed by Fimi Navi 2020 App to prompt users to update.
Please download new firmware when the App is connected
with the drone and remote controller

29
Basic Specification
Drone
Product model：FMWRJ03A8
Dimensions：204×106×72.6mm
Diagonal size：372mm
Take off weight：About 768g
Max ascending speed：5m/s
Max descending speed：4m/s
Max flight speed：18m/s
GNSS：GPS/GLONASS/CNSS
Hover accuracy：
Vertical:±0.1m (Within the ultrasonic detecting range)
±0.5m (when GPS positioning is active) Horizontal: ±1.5m
Operating temperature：0°C ~ 40°C
Suitable altitude：≤5000m
Operating frequency：2.400-2.4835GHz
Charger
Rated input：100-240V~50/60Hz 1.5A
Rated output：13.05V 3A
Rated power：39.15W
Remote controller
Net weight：About 373g
Dimensions：203.8×91×46.6mm
Operating frequency：2.400-2.4835GHz
Type：Rechargeable lithium battery
Capacity：3900mAh
Nominal voltage：3.7V
Input：5 V 2A
Max transmission distance：About 10000m*
Operating temperature：0 ~ 40°C
Suitable altitude：≤5000m
Note：
Remote control distance reach to 10km (FCC) in open area and no interference . All above testing and
data come from FIMI laboratory, errors may occur in actual use for operating and environmental changes.
Battery
Type：Rechargeable lithium battery pack
Weight：About 270g
Capacity：4500mAh
Voltage：11.4V
Limit voltage：13.05V
Energy：51.3Wh
Charging ambient temperature：0°C ~ 40°C
Gimbal
Controllable rotation range：0°~ -90°（Pitch）
Angular vibration range：
± 0.005°
Lens：FOV 79°
Camera aperture：f1.6
Camera focal distance：4.71mm
Equivalent focal distance：25mm
Sensor：1/2.0'' SONY CMOS
ISO range：
100 - 6400
Shutter speed：32 ~ 1/8000s
Max video resolution：3840 x 2160 | 30fps | 25fps | 24fps
Max birate: 100Mbps
File system：FAT32
Image format：JPG，JPG+DNG
Video format：MP4
Memory card type：Micro SD ( U3 and above ) 8 ~ 256GB
MTOM Statement
FIMI X8SE 2022 is a quadrotor aircraft. The Maximum
Take-Off Mass (MTOM) of FIMI X8SE 2022 (Model:
FMWRJ03A8) is 768g including the FIMI X8SE 2022
Intelligent Flight Battery, propellers, and a microSD
card.

30
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated

FIMI_X8_SE_2022_V2_User_Manual_V3.0.2_EN.pdf

More Related Content

Similar to FIMI_X8_SE_2022_V2_User_Manual_V3.0.2_EN.pdf (20)

Recently uploaded (20)

FIMI_X8_SE_2022_V2_User_Manual_V3.0.2_EN.pdf