ComNet FVT10D1EM Data Sheet
0 likes80 views
The Comnet FVT/FVR10D1E series is a video transmitter and receiver that supports 10-bit digital video transmission along with a bi-directional data channel and a 10/100 Mbps Ethernet port. It is compatible with various CCTV camera systems and offers features such as voltage transient protection and hot-swappable rack modules. Designed for surveillance and hybrid Ethernet applications, it provides a robust solution for video and data transmission over distances up to 30 miles.
ComNet FVT10D1EM Data Sheet
- 1. LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427 10-bit digital video with one bi-directional data channel + 1 10/100 Mbps fast Ethernet port Description The ComNet™ FVT/FVR10D1E series video transmitter/ receiver and data transceiver and the FVT10D1EM mini transmitter and data transceiver support the simultaneous transmission of short haul quality 10-bit EIA RS-250C digital video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The modules are universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports “up-the-coax” data transmission from most major manufacturers. Packaged in the exclusive ComNet ComFit housing, the FVT/FVR10D1E standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate. V 1 D 1 E 1 Features - 10-bit digital video transmission - One bi-directional data channel - One 10/100 BASE-T/TX fast Ethernet port - IEEE 802.3 compliant - Automatic MDI/MDI-X crossover - Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance - Compatible with all NTSC, PAL, or SECAM CCTV camera systems - Certified to the requirements of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. - Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events. - Automatic resettable fuses on all power lines - Distances up to 30 miles (48 km) - Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters - FVT/FVR10D1E(M)(S) is a hot-swappable rack module - FVT/FVR10D1E(M)(S) is interchangeable between stand- alone or rack mount use – ComFit - Lifetime Warranty FVT10D1E(M)(S)M FVT/FVR10D1E(M)(S) Applications - Surveillance Systems with Control - Hybrid Ethernet Systems
- 2. specifications 11.07.11© 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC. 3 CORPORATE DRIVE | DANBURY, CT 06810 | USA T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET 10-bit digital video with one bi-directional data channel + one 10/100 Mbps fast Ethernet port VIDEO Video Input: 1 volt pk-pk (75 ohms) Overload: 1.5V pk-pk Bandwidth: 5 Hz - 10 MHz Differential Gain: 2% Differential Phase: 0.7˚ Tilt: 1% Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth DATA Data Interface: RS232, RS422 and RS485 (2W/4W), UTC (Up-the- Coax) Data Format: NRZ, NRZI Manchester, Bi-phase and Sensornet Data Rate: DC-250 Kbps (NRZ) ETHERNET Data Interface: 10/100 BASE-T/TX Data Rate: 10/100 Mbps Full Duplex WAVELENGTH 1310/1550 nm, MM and SM NUMBER OF FIBERS 1 OPTICAL EMITTER Laser Diode LED INDICATORS - Link - Video - Data - Ethernet Activity CONNECTORS Optical: 1 ST connector Power: Terminal Block Video: BNC (Gold Plated Center-Pin) Data: RJ45 Small-Size Data: Terminal Block Ethernet: RJ45 ELECTRICAL MECHANICAL Power: Surface Mount: 8-15 VDC @ 350 mA Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm) (L×W×H) - Mini 4.1 × 3.7 × 1.1 in., (10.4 × 9.4 × 2.8 cm) Size (in./cm) (L×W×H) - Full Size 6.1 × 5.3 × 1.1 in., (15.5 × 13.5 × 2.8 cm) Shipping Weight: 2 lb./0.9 kg ENVIRONMENTAL MTBF: 100,000 hours Operating Temp: -40˚ C to +75˚ C Storage Temp: -40˚ C to +85˚ C Relative Humidity: 0% to 95% (non-condensing)* * May be extended to condensation conditions by adding suffix ‘/C’ to model number for conformal coating. Mini-Video Transmitter/Data Transceiver Video Transmitter/Data Transceiver Video Receiver/Data Transceiver PART NUMBER OPTICAL PWR BUDGET MAX. DISTANCE† FVT10D1EMM FVT10D1EM FVR10D1EM Multimode 62.5/125µm FIBERS REQUIREDDESCRIPTION FIBER 1 3 km (2 miles)16 dB Mini-Video Transmitter/Data Transceiver Video Transmitter/Data Transceiver Video Receiver/Data Transceiver FVT10D1ESM FVT10D1ES FVR10D1ES Single Mode 9/125µm 1 48 km (30 miles)16 dB NOTE: This product requires a fiber installation with a minimum 35 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product specifications are subject to change without notice. † Distance may be limited by optical dispersion. Check with control system manufacturer for distance limits on up-the-coax systems. OPTICAL FIBER COPPER 1 Fiber 9/125µm SM Up to 48 km (30 miles) D V D V E E FVT10D1ESM FVR10D1ES FVT10D1E(M)(S)M FVT/FVR10D1E(M)(S) Accessories Options 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included) Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory) DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)