ComNet FVR10 Data Sheet
0 likes166 views
The document describes the Comnet FVR10 video receiver which detects AM video signals on a multimode optical fiber and features manual gain control, full color compatibility, and built-in protection against power surges. It is designed to meet environmental compliance standards and offers a plug-and-play installation without needing electrical adjustments. The receiver supports a maximum distance of 4 km and comes with a lifetime warranty and various mounting options.
![SPECIFICATIONS
Video
Video Output 1 volt pk-pk
Bandwidth 5 Hz - 10 MHz¹
Differential Gain 5%
Differential Phase 5˚
Tilt 1%
Signal-to-Noise Ratio (SNR) 55 dB @ 10 dB Attn.
60 dB @ 7 dB Attn.
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
Wavelength
FVR10 850 nm, Multimode
Number of Fibers 1
Connectors
Optical ST
Power Terminal Block
Video BNC (Gold Plated Center-Pin)
Indicating LEDs Video Present
Power
Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately)
Power Consumption 1 W
Electrical Mechanical
Number of Rack Slots 1
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight 2 lb / 0.9 kg
Environmental
MTBF 100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²
[1] At 6 dB Attenuation
FVR10 Single Video Receiver with
Manual Gain Control
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description Fibers Req’d Fiber Optical Power Budget Maximum Distance³
FVR10 Video Receiver (850 nm) 1 Multimode 62.5/125µm 14 dB 4 km (2.5 miles)
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[2] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
[3] Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
OPTICAL FIBER
VIDEO (Coax)
1 Fiber
62.5/125µm MM
Up to 4 km
(2.5 miles)
V VFVT11M FVR10
03 Dec 2014© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET](https://image.slidesharecdn.com/fvr10-150603164029-lva1-app6892/85/ComNet-FVR10-Data-Sheet-2-320.jpg)
ComNet FVR10 Data Sheet
- 1. FEATURES › AM Video Receiver › NTSC, PAL, SECAM compatible › Manual Gain Control › Full color compatibility › Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events. › Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low- line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. › Bi-Color (Red/Green) indicator to monitor system performance › Hot-swappable rack modules › Interchangeable between stand-alone or rack mount – ComFit package › Units may be DIN-Rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate › Lifetime Warranty APPLICATIONS › CCTV (Fixed Video) The ComNet™ FVR10 video receiver detects an AM video signal on one multimode optical fiber. The receiver utilizes Manual Gain Control and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. FVR10 Single Video Receiver With Manual Gain Control LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427 1HARDENEDINCLUDED
- 2. SPECIFICATIONS Video Video Output 1 volt pk-pk Bandwidth 5 Hz - 10 MHz¹ Differential Gain 5% Differential Phase 5˚ Tilt 1% Signal-to-Noise Ratio (SNR) 55 dB @ 10 dB Attn. 60 dB @ 7 dB Attn. Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth Wavelength FVR10 850 nm, Multimode Number of Fibers 1 Connectors Optical ST Power Terminal Block Video BNC (Gold Plated Center-Pin) Indicating LEDs Video Present Power Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately) Power Consumption 1 W Electrical Mechanical Number of Rack Slots 1 Circuit Board Meets IPC Standard Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm) Shipping Weight 2 lb / 0.9 kg Environmental MTBF 100,000 hours Operating Temp -40˚ C to +75˚ C Storage Temp -40˚ C to +85˚ C Relative Humidity 0% to 95% (non-condensing)² [1] At 6 dB Attenuation FVR10 Single Video Receiver with Manual Gain Control TYPICAL APPLICATION ORDERING INFORMATION Part Number Description Fibers Req’d Fiber Optical Power Budget Maximum Distance³ FVR10 Video Receiver (850 nm) 1 Multimode 62.5/125µm 14 dB 4 km (2.5 miles) Accessories Options DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included) [2] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory) DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4) [3] Distance may be limited by optical dispersion. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J In a continuing effort to improve and advance technology, product specifications are subject to change without notice. OPTICAL FIBER VIDEO (Coax) 1 Fiber 62.5/125µm MM Up to 4 km (2.5 miles) V VFVT11M FVR10 03 Dec 2014© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks. 3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET