ComNet FVR11M Data Sheet
0 likes85 views
The ComNet FVR11M is a mini video receiver designed for AM video signals transmitted over multimode fiber optic cables, featuring automatic gain control and a plug-and-play installation. It meets environmental requirements for traffic signal control equipment and offers protection against voltage transients. The device is lightweight, operates across a temperature range of -40°C to +75°C, and supports transmission distances of up to 4 km.
![SPECIFICATIONS
Video
Video Output 1 volt pk-pk (AGC controlled)
Bandwidth 5 Hz - 10 MHz¹
Differential Gain 5%
Differential Phase 5˚
Tilt 1%
Signal-to-Noise Ratio (SNR) 55 dB @ 10 dB Attn.
60 dB @ 7 dB Attn.
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to
maintain 6 Mhz Bandwidth
Wavelength
FVR11 850 nm, Multimode
Number of Fibers 1
Connectors
Optical ST
Power Terminal Block
Video BNC (Gold Plated Center-Pin)
Indicating LEDs Video Present
Power
Operating Voltage Range 8 to 15 VDC
Power Consumption 60 mA
Electrical Mechanical
Circuit Board Meets IPC Standard
Size (in./cm) (L×W×H)
Surface Mount 4.0 × 3.7 × 1.0 in (10.4 × 9.5 × 2.7 cm)
Shipping Weight 1 lb / 0.45 kg
Environmental
MTBF 100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²
[1] At 6 dB Attenuation
FVR11M Single Mini Video Receiver With
Automatic Gain Control (AGC)
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description Fibers Required Fiber Optical PWR Budget Maximum Distance³
FVR11M AGC Mini Video Receiver (850 nm) 1
Multimode
62.5/125µm
14 dB 4 km (2.5 miles)
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[2] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
[3] Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
OPTICAL FIBER
VIDEO (Coax)
1 Fiber
62.5/125µm MM
Up to 4 km
(2.5 miles)
V VFVT11M FVR11M
03 Dec 2014© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET](https://image.slidesharecdn.com/fvr11m-150603164029-lva1-app6892/85/ComNet-FVR11M-Data-Sheet-2-320.jpg)
ComNet FVR11M Data Sheet
- 1. FEATURES › AM Video Receiver › NTSC, PAL, SECAM compatible › Full range Automatic Gain Control (AGC) › Full color compatibility › No in-field electrical or optical adjustments required › Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low- line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. › Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events. › Bi-Color (Red/Green) indicator to monitor system performance › Units may be DIN-Rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate › Lifetime Warranty APPLICATIONS › CCTV (Fixed Video) The ComNet™ FVR11M video receiver detects an AM video signal on one multimode fiber optic cable. The receiver utilizes Automatic Gain Control (AGC) and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. FVR11M Single Mini Video Receiver With Automatic Gain Control (AGC) LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427 1HARDENEDINCLUDED
- 2. SPECIFICATIONS Video Video Output 1 volt pk-pk (AGC controlled) Bandwidth 5 Hz - 10 MHz¹ Differential Gain 5% Differential Phase 5˚ Tilt 1% Signal-to-Noise Ratio (SNR) 55 dB @ 10 dB Attn. 60 dB @ 7 dB Attn. Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to maintain 6 Mhz Bandwidth Wavelength FVR11 850 nm, Multimode Number of Fibers 1 Connectors Optical ST Power Terminal Block Video BNC (Gold Plated Center-Pin) Indicating LEDs Video Present Power Operating Voltage Range 8 to 15 VDC Power Consumption 60 mA Electrical Mechanical Circuit Board Meets IPC Standard Size (in./cm) (L×W×H) Surface Mount 4.0 × 3.7 × 1.0 in (10.4 × 9.5 × 2.7 cm) Shipping Weight 1 lb / 0.45 kg Environmental MTBF 100,000 hours Operating Temp -40˚ C to +75˚ C Storage Temp -40˚ C to +85˚ C Relative Humidity 0% to 95% (non-condensing)² [1] At 6 dB Attenuation FVR11M Single Mini Video Receiver With Automatic Gain Control (AGC) TYPICAL APPLICATION ORDERING INFORMATION Part Number Description Fibers Required Fiber Optical PWR Budget Maximum Distance³ FVR11M AGC Mini Video Receiver (850 nm) 1 Multimode 62.5/125µm 14 dB 4 km (2.5 miles) Accessories Options DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included) [2] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory) DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4) [3] Distance may be limited by optical dispersion. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J In a continuing effort to improve and advance technology, product specifications are subject to change without notice. OPTICAL FIBER VIDEO (Coax) 1 Fiber 62.5/125µm MM Up to 4 km (2.5 miles) V VFVT11M FVR11M 03 Dec 2014© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks. 3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET