ComNet FVR22 Data Sheet
0 likes106 views
The document describes the Comnet FVR22 dual independent AM video receiver, which can detect two AM video signals over multimode fiber optic cables and features automatic gain control. It is designed for easy installation with a plug-and-play feature, complies with environmental standards, and provides voltage transient protection. The unit is suitable for smaller CCTV installations, with a lifetime warranty and various mounting options.
![SPECIFICATIONS
Video
Video Output 1 volt pk-pk (75 ohms)
Bandwidth 5 Hz - 10 MHz*
Differential Gain 5%
Differential Phase 5˚
Tilt 1%
Signal-to-Noise Ratio (SNR) 60 dB typical
54 dB minimum
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to
maintain 6 Mhz Bandwidth
Wavelength 850 nm, Multimode
Number of Fibers 2
Connectors
Optical ST
Power Terminal Block
Video BNC (Gold Plated Center-Pin)
Indicating LEDs Video Present for each channel
Power
Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately)
Power Consumption 2 W
Electrical Mechanical
Number of Rack Slots 1
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight 2 lb./0.9 kg
Environmental
MTBF 100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
FVR22 Dual Independent AM Video Receiver
with Automatic Gain Control (AGC)
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description Fibers Required Fiber Optical Pwr Budget Maximum Distance²
FVR22 AGC Dual Video Receiver (850 nm) 2
Multimode
62.5/125µm
14 dB 4 km (2.5 miles)
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[1] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
[2] Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
OPTICAL FIBER
VIDEO (Coax)
1 Fiber
62.5/125µm MM
1 Fiber
62.5/125µm MM
Up to 4 km
(2.5 miles)
V
V
V
FVT11M
FVT11M
FVR22 2
29 Dec 2014© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET](https://image.slidesharecdn.com/fvr22-150603164030-lva1-app6892/85/ComNet-FVR22-Data-Sheet-2-320.jpg)
ComNet FVR22 Data Sheet
- 1. FEATURES › AM Video Receiver › NTSC, PAL, SECAM compatible › Full range Automatic Gain Control (AGC) › Two independent receivers in one model › Full color compatibility › Can be used to double the fixed video capacity of a C1 card cage › Plug-and-Play design for ease of installation › No in-field electrical or optical adjustments required › Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low- line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. › Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events. › Automatic resettable fuses on all power lines › Bi-Color (Red/Green) indicator to monitor system performance › Hot-swappable rack modules › Interchangeable between stand-alone or rack mount use – ComFit › Units may be DIN-Rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate › Lifetime Warranty APPLICATIONS › CCTV (Fixed Video) The ComNet™ FVR22 dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The module is not a multiplexer. The module is ideal for smaller CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. The modules utilize Automatic Gain Control (AGC). The receiver is compatible with the ComNet FVT11M and the FVT20 dual video transmitter. Plug-and-play design ensures ease of installation. FVR22 Dual Independent AM Video Receiver With Automatic Gain Control (AGC) LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427 2HARDENEDINCLUDED
- 2. SPECIFICATIONS Video Video Output 1 volt pk-pk (75 ohms) Bandwidth 5 Hz - 10 MHz* Differential Gain 5% Differential Phase 5˚ Tilt 1% Signal-to-Noise Ratio (SNR) 60 dB typical 54 dB minimum Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to maintain 6 Mhz Bandwidth Wavelength 850 nm, Multimode Number of Fibers 2 Connectors Optical ST Power Terminal Block Video BNC (Gold Plated Center-Pin) Indicating LEDs Video Present for each channel Power Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately) Power Consumption 2 W Electrical Mechanical Number of Rack Slots 1 Current Protection Automatic Resettable Solid-State Current Limiters Circuit Board Meets IPC Standard Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm) Shipping Weight 2 lb./0.9 kg Environmental MTBF 100,000 hours Operating Temp -40˚ C to +75˚ C Storage Temp -40˚ C to +85˚ C Relative Humidity 0% to 95% (non-condensing)¹ FVR22 Dual Independent AM Video Receiver with Automatic Gain Control (AGC) TYPICAL APPLICATION ORDERING INFORMATION Part Number Description Fibers Required Fiber Optical Pwr Budget Maximum Distance² FVR22 AGC Dual Video Receiver (850 nm) 2 Multimode 62.5/125µm 14 dB 4 km (2.5 miles) Accessories Options DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included) [1] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory) DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4) [2] Distance may be limited by optical dispersion. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J In a continuing effort to improve and advance technology, product specifications are subject to change without notice. OPTICAL FIBER VIDEO (Coax) 1 Fiber 62.5/125µm MM 1 Fiber 62.5/125µm MM Up to 4 km (2.5 miles) V V V FVT11M FVT11M FVR22 2 29 Dec 2014© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks. 3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET