GOOGLE ASSISTANCE BASED HOME AUTOMATION
0 likes32 views
This document describes a home automation system that allows users to control home appliances like lights and fans using voice commands to the Google Assistant. The system uses a Node MCU microcontroller connected to relays to control devices. It also integrates IFTTT and Blynk applications to enable voice control via the Google Assistant app. The system has low cost and flexibility to automate control of devices in homes, schools, hospitals and other settings through voice commands.
![International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 09 Issue: 02 | Feb 2022 www.irjet.net p-ISSN: 2395-0072
© 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1082
REFERENCES
[1]. Nikhil Rathod, P.D. Paikrao – ‘Google Assistance Based
Home Automation’,- International Journal of
Communications - Department of Electronics and Tele-
Communication Engineering Dr. Babasaheb Ambedkar
Technological University,LonereOsmanabad-413501INDIA,
year 2020, Vol. No.:5.
[2]. Potamitis, I., Georgila, K. Fakotakis, N., &Kokkinakis, G –
‘An Integrated system for smarthome control of appliances
based on remote speech interaction’,- 8 th European
conference on speech and communication technology,
Publisher: World Journal control science and Engineering,
Place: Geneva, Country: Switzerland, Year: 2003, Vol. No: 2,
Iss. No.1, pp. 2197-2200.
[3]. S. M. AnamulHaque, S. M. Kamruzzaman and Md.
Ashraful Islam – ‘A System for SmartHome Control of
Appliances Based on Time and Speech Interaction’,-
Proceedings of 4th International Conference on Electrical
Engineering, Place: Bhubaneshwar, Country: India,
Year:2006., pp.128 to 131.
[4]. N. P Jawarkar, V. Ahmed, S.A. Ladhake,andR.D Thakare–
‘Micocontroller based Remote monitoring using mobile
phone through spoken commands’,- Journal of networks,
Publisher: World Journal control science and engineering,
Place: Lagos, Country: Nigeria, Year:2008, Vol. No.:3, Iss.
No.2, pp.58 to 83.
[5]. Prof. Era Johri– ‘Remote Controlled Home Automation
using Android application via Wi-Fi connectivity’, -
International Journal on Recent and Innovation and recent
trends in computing and communication, Publisher: World
Journal control scienceand engineering,Place:NorthDakota,
Country: USA, Year: 2012, Vol. No.:3, Iss. No.3, pp.2321 to
8169.
[6] Aayush Agarwal1 , Anshul Sharma2,AsimSaketSamad3,
S Babeetha4,” Home Automation System Using Google
Assistant”, IJARIIE, Vol-4, 2018, pp. 4009-4016.
[7] Rajeev Piyare1 and Seong Ro Lee1,” smartHome-Control
and Monitoring System Using Smart Phone”, ICCA, Vol. 24,
2013, pp. 83-86.
[8] Vinay sagar K N1, Kusuma S M2,” Home Automation
Using Internet of Things”, International Research Journal of
Engineering and Technology, Volume: 02, Jan-2015,pp.
1996-1970.
[8] D.Swathi 1 , V.S.D.Rekha 2,” Home Automation Based On
IoT Using Google Assistant”, International Journal of
Advanced Research Trends in Engineering and Technology,
Vol. 6, January 2019, pp. 1-6.
[11] Anjum Ara1, Shivkumar Jawaligi2,”
NodeMCU(ESP8266)Control HomeAutomationusingGoogle
Assistant”, International Research Journal of Engineering
and Technology, Volume: 06, July 2019, pp. 3644-3648.
[12] Manish Prakash Gupta,” Google Assistant Controlled
Home Automation”, International Research Journal of
Engineering and Technology, Volume: 05, May-2018, pp.
2074-2077.
BIOGRAPHIES
M.TECH Student, Dept. Of Electronics
and Telecommunication Engineering,
TPCT’s college of engineering,
Osmanabad, Maharashtra, India.](https://image.slidesharecdn.com/irjet-v9i2186-220913103121-1b7c7188/85/GOOGLE-ASSISTANCE-BASED-HOME-AUTOMATION-5-320.jpg)
GOOGLE ASSISTANCE BASED HOME AUTOMATION
- 1. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 02 | Feb 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1078 GOOGLE ASSISTANCE BASED HOME AUTOMATION Sakib Sadik Shaikh1, Vandana C. Maindargi2 1M.TECH Student, Dept. of Electronics and Telecommunication Engineering, TPCT’s college of engineering , Osmanabad, Maharashtra, India. 2Professor, Dept. of Electronics and Telecommunication Engineering, TPCT’s college of engineering , Osmanabad, Maharashtra, India. -----------------------------------------------------------------------***-------------------------------------------------------------------- Abstract – The world around us keeps getting smarter not only to do we have advanced AI Services like the google assistant, but now we have got the IOT connecting physical objects to the digital world. Its amazing when you think about it, but the real stuff starts to happen when these two technologies intersects. Ever thought of a life where you could just command your home appliances to work as you need just by using your voice? So, in this paper we are writing about the small prototype in which we are going to control the light switching over the internet by using our voice with google assistant and in the same way we will control the other home applianceslikelights,fan,TV,college, school, and labs, etc Key Words: IFTTT Application, Internet IOT, Google Assistant, Smartphone, Node MCU, relay, Power Supply. 1. INTRODUCTION The IoT technology describes the connections between like smart mobiles, PDAs, smart TVs, and sensors to the Internet where the devices are linked to get communicate with people and between themselves. Every day modern people expect a new device and new technology to simplify their day to day life easy and better. It contains the Google Assistant application , IFTTT application, Blynk application, Node MCU, ULN 2803 IC. For Example, if we thought that the line following robots moving forward and backward by using sensors and a motors. Like that, when we work entire day, we are getting too tired that they got it difficult to move once we slept on our sofa or bed. So at that time Temperaturewasalreadyset before we are reaching our home. So we can change the temperature just by giving a voice command withthehelpof google assistant which is already on our mobile phone. Motivation behind this work come from automation which can reduce the man power and reduce the time required for process. This project will help to shopkeeper to reduce their work and increased the accuracy during their work. 2. SYSTEM BLOCK DIAGRAM Fig – 1. Block Diagram System block diagram contains Voice input from apps, poer supply, microcontroller, relay, IFTTT, Blynk application, Node MCU, Google Assistant, smartphone, controllingdevice and it is connected with Wi-Fi. The node MCU and relay driver will be connected with microcontroller.Theoperator and controller mainly work to send the required command towards relay board. The relay board will be acts as a switch between the circuits and the other external components are connected to the relay board so these all the components will be controlled by using internet of thing technology. 2.1 The main blocks of this project 1. Node-MCU ESP-8266 2. Relay Module 3. Blynk 4. IFTT 2.1.1 Node MCU: Node MCU is an open source IoT platform. This Contains the bios, It can be sprint on the ESP8266Wi-FiSoC out of expressive devices and the ESP-12 module, it is builted in hardware systems.
- 2. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 02 | Feb 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1079 Specifications of node MCU (esp8266): 1. Developer: ESP8266 Open source Community 2. Type: Single board microcontroller 3. Operating system: XTOS 4. CPU: ESP8266 5. Memory: 128kBytes 6. Storage: 4MBytes 7. Power By: USB 8. Power Voltage:3v, 5v 9. Code: Arduino Cpp 10. IDE Used: Arduino IDE 11. GPIO: 10 Fig – 2. .Node MCU Fig – 3. Pin diagram of Node MCU 2.1.2 Relays: A relay is a electronically operated switch electromechanically and its opening and closing depends on that. It consists of 5 pins. They are 2 coil pins, 1connection pin, 1 no connection pin, 1 common pin. Initially, at the off state, it is connected to no connection pin. But when we give the input from the microcontroller then magnetic field between the coil pins produces current so it shifts to connection pin and the current will pass through the load. Specifications: 1. Both controlled by 12V and 5V input Voltage 2. Equipped with high-current relay, AC250V 10A; DC30V 10A 3. Opto-isolated inputs. 4. Indication LED’s for Relay output status. Fig - 4. Relay Fig - 5. Pin Diagram of Relay
- 3. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 02 | Feb 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1080 2.1.3 ULN 2803 IC: ULN 2803 IC is used as a relay driver. This IC has a very high voltage and high current transistor Array used withthe Microcontrollers that place we needs to run the ver y high loads. Fig – 6. ULN 2803 IC 2.1.4 Blynk application: The blynk application was designed to built the graphic interface in the android by dropping and dragging widgets. It can be control the Arduino and other some components over the internet. Fig.7 shows the Functioning of the Blynk Application. It was designed for the Internet of Things. Its setup is required as per the requirement. Fig - 7. Working of Blynk Application 2.1.5 IFTTT Application IFTTT is builted to automates all the things from liked apps apps and websites through app-enabled accessories and devices which acts as a smart as well. The Screenshot of the IFTTT Application showing in the figure 8, it seems after Creating Several Applets. "The company will provide the software platform and that will connects with the apps, devices and services. Fig - 8. Working of IFTTT Application 3. GOOGLE ASSISTANT Recently all the people have their phones has android and it contains the Google Assistant tool .It is one type of software which permits the humans to respond the all apps which are present in the device by using voice commanding mode. It permits the people to comply and give the signal to the apps in their devices by using sound tone commands. Fig- 9. Google Assistance 4. RESULTS We have added the output for the Google assistant based House automation is shown in following figure number 10 . It is showing the prototype and implementation of the system.
- 4. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 02 | Feb 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1081 Fig – 10. Connections of the system 4.1 Relay connected to BULB Fig – 11. Results of Google assistant-controlled Home automation Fig - 12. Light turning on and off 5. APPLICATIONS 1. Smart phones: The mobile app for house control gives the following accessibilities: 1) Remote connection to the Home Gateway. 2) Devicecontrol. 3) Device Monitoring. 4) Managing schedule. 2. Home automation 3. School and College 4. Hospital 6. FUTURE SCOPE 1. In sensor technologies 2. In smart robotic appliances. 3. For protection of connected devices. 4. For fault detection and feedback system. 7. CONCLUSION The review paper shows, the architectures which we are used to build the project has a low cost and havingflexibility for house Automation system by using advanced technologies which are proposed and implemented in this paper. It will increase the efficiency of this application. The reason behind to write this paper is to increase the comfortability of users and also reduce the efforts which are required to users.
- 5. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 02 | Feb 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1082 REFERENCES [1]. Nikhil Rathod, P.D. Paikrao – ‘Google Assistance Based Home Automation’,- International Journal of Communications - Department of Electronics and Tele- Communication Engineering Dr. Babasaheb Ambedkar Technological University,LonereOsmanabad-413501INDIA, year 2020, Vol. No.:5. [2]. Potamitis, I., Georgila, K. Fakotakis, N., &Kokkinakis, G – ‘An Integrated system for smarthome control of appliances based on remote speech interaction’,- 8 th European conference on speech and communication technology, Publisher: World Journal control science and Engineering, Place: Geneva, Country: Switzerland, Year: 2003, Vol. No: 2, Iss. No.1, pp. 2197-2200. [3]. S. M. AnamulHaque, S. M. Kamruzzaman and Md. Ashraful Islam – ‘A System for SmartHome Control of Appliances Based on Time and Speech Interaction’,- Proceedings of 4th International Conference on Electrical Engineering, Place: Bhubaneshwar, Country: India, Year:2006., pp.128 to 131. [4]. N. P Jawarkar, V. Ahmed, S.A. Ladhake,andR.D Thakare– ‘Micocontroller based Remote monitoring using mobile phone through spoken commands’,- Journal of networks, Publisher: World Journal control science and engineering, Place: Lagos, Country: Nigeria, Year:2008, Vol. No.:3, Iss. No.2, pp.58 to 83. [5]. Prof. Era Johri– ‘Remote Controlled Home Automation using Android application via Wi-Fi connectivity’, - International Journal on Recent and Innovation and recent trends in computing and communication, Publisher: World Journal control scienceand engineering,Place:NorthDakota, Country: USA, Year: 2012, Vol. No.:3, Iss. No.3, pp.2321 to 8169. [6] Aayush Agarwal1 , Anshul Sharma2,AsimSaketSamad3, S Babeetha4,” Home Automation System Using Google Assistant”, IJARIIE, Vol-4, 2018, pp. 4009-4016. [7] Rajeev Piyare1 and Seong Ro Lee1,” smartHome-Control and Monitoring System Using Smart Phone”, ICCA, Vol. 24, 2013, pp. 83-86. [8] Vinay sagar K N1, Kusuma S M2,” Home Automation Using Internet of Things”, International Research Journal of Engineering and Technology, Volume: 02, Jan-2015,pp. 1996-1970. [8] D.Swathi 1 , V.S.D.Rekha 2,” Home Automation Based On IoT Using Google Assistant”, International Journal of Advanced Research Trends in Engineering and Technology, Vol. 6, January 2019, pp. 1-6. [11] Anjum Ara1, Shivkumar Jawaligi2,” NodeMCU(ESP8266)Control HomeAutomationusingGoogle Assistant”, International Research Journal of Engineering and Technology, Volume: 06, July 2019, pp. 3644-3648. [12] Manish Prakash Gupta,” Google Assistant Controlled Home Automation”, International Research Journal of Engineering and Technology, Volume: 05, May-2018, pp. 2074-2077. BIOGRAPHIES M.TECH Student, Dept. Of Electronics and Telecommunication Engineering, TPCT’s college of engineering, Osmanabad, Maharashtra, India.