Hp0 y39 question answers

HP HP0-Y39 Exam
Managing and Troubleshooting Enterprise Wireless Networks
Version = Demo
Total Questions in Original Product = 42
http://www.passcertification.com/HP0-Y39.html
Pass Certification
No1. Test Preparation Resource

PassCertification.com- HP0-Y39 Exam Questions and Answers 1
Question: 1.
Click the Exhibit button and view the four exhibits.

Exhibit 4: Active controller configuration
A3000-10G-PoE+ Wireless Switch Active Controller side configuration file
#
version 5.20, Release 3111
#
sysname HP
#
domain default enable system
#
telnet server enable
#
port-security enable
#
portal trap server-down
#
oap management-ip 24.1.1.11 slot 0
#
wlan country-code US
#
vlan 1
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
user-group system
#
local-user admin
password simple admin
authorization-attribute level 3
service-type telnet
#
wlan rrm
dot11a mandatory-rate 6 12 24
dot11a supported-rate 9 18 36 48 54
dot11b mandatory-rate 1 2
dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48 54
#

wlan service-template 1 crypto
ssid HP_Openaccess
bind WLAN-ESS 0
cipher-suite ccmp
security-ie rsn
service-template enable
#
interface NULL0
#
interface Vlan-interface1
ip address 24.1.1.10 255.255.255.0
#
interface GigabitEthernet1/0/1
#
interface WLAN-ESS0
port-security port-mode psk
port-security tx-key-type 11key
port-security preshared-key pass-phrase simple Ay+G8lqFPsu0FxRl6KqYEWN7QkT
#
wlan ap wa2620eagn model WA2620E-AGN
serial-id 219801A0AL9099G00466
radio 1
radio 2
service-template 1
radio enable
#
dhcp enable
#
ip route-static 0.0.0.0 0.0.0.0 24.1.1.1
#
load xml-configuration
#
user-interface aux 0
user-interface vty 0 4
authentication-mode scheme
user privilege level 3
#
return
A customer is experiencing difficulties with an access point (AP) not reaching operational
(Run/M) state. A trace is taken as shown in the Ethernet packet exhibit. Based on the
exhibits, which issue could explain the AP remaining in Idle status?
A. The AP and active controller are not in the same subnet.
B. Option 43 is not configured properly on the DHCP server.
C. The AP is sending a unicast packet to the active controller instead of the required
broadcast packet.
D. A device between the active controller and the AP is using NAT, which prevents proper
communication.
Answer: D

Question: 2.
Click the Exhibit button.
Exhibit: Active controller configuration
A3000-10G-PoE+ Wireless Switch Active Controller side configuration file
#
#
sysname HP
#
#
#
#
#
#
#
vlan 1
#
vlan 2
#
domain system
state active
idle-cut disable
#
dhcp server ip-pool 0
network 192.168.0.0 mask 255.255.255.0
gateway-list 192.168.0.200
option 43 hex 80070000 01C0A800 64
#
user-group system
#
local-user admin
service-type telnet
#
wlan rrm

#
wlan radio-policy rp1
beacon-interval 2000
dtim 4
rts-threshold 999
fragment-threshold 1000
#
ssid HP_Openaccess
bind WLAN-ESS 0
cipher-suite ccmp
security-ie rsn
#
interface NULL0
#
ip address 192.168.0.100 255.255.255.0
#
interface Vlaninterface2
ip address 192.168.1.100 255.255.255.0
#
port link-type trunk
port trunk permit vlan all
#
interface WLAN-ESS0
#
wlan ap wa2620eagn model WA2620E-AGN
radio 1
radio 2
service-template 1
radio-policy rp1
radio enable
#
ip route-static 0.0.0.0 0.0.0.0 192.168.0.200
#
#
#
return

A customer is experiencing network performance issues with their wireless network. The
customer decides to take corrective actions on their wireless active controller. Based on the
exhibit, what will happen on the wireless network if the customer sent a 1200 byte packet
from a wireless client associated to essid HP_Openaccess? (Select two.)
A. The wireless packet will be fragmented.
B. The wireless packet will trigger RTS/CTS frames to be sent.
C. The wireless packet will not be fragmented.
D. The wireless packet will not trigger RTS/CTS frames to be sent.
E. The access point will send more Beacon frames than if the default configuration had been
left
unchanged.
Answer: AB
Question: 3.
Click the Exhibit button and view both exhibits.

Exhibit 2 Active controller
#
#
sysname HP
#
#
#
#
#
#
#
vlan 1
#
vlan 2
#
domain system
state active
idle-cut disable
#
network 192.168.0.0 mask 255.255.255.0
option 43 hex 80070000 01C0A800 60
#
network 192.168.1.0 mask 255.255.255.0
option 43 hex 80070000 01C0A800 60
#
user-group system
#
local-user admin
service-type telnet
#
wlan rrm

#
ssid HP_Openaccess
bind WLAN-ESS 0
cipher-suite ccmp
security-ie rsn
#
interface NULL0
#
ip address 192.168.0.100 255.255.255.0
#
ip address 192.168.1.100 255.255.255.0
#
#
interface WLAN-ESS0
port link-type hybrid
port hybrid vlan 1 untagged
#
wlan ap AP1 model WA2620E-AGN
radio 1
service-template 1
radio enable
radio 2
service-template 1
radio enable
#
radio 1
service-template 1
radio enable
radio 2
service-template 1
radio enable
#
radio 1
service-template 1

radio enable
radio 2
service-template 1
radio enable
#
radio 1
service-template 1
radio enable
radio 2
service-template 1
radio enable
#
radio 1
service-template 1
radio enable
radio 2
service-template 1
radio enable
#
dhcp enable
#
ip route-static 0.0.0.0 0.0.0.0 192.168.0.200
#
#
#
return
A university media course uses an auditorium that seats 400 students. Wireless access
points (APs) are installed to provide access to the school's video servers. Some students are
experiencing frequent interruptions to video playback while others have no issues. Based on
the exhibits, what is a solution to optimize performance for all students?
A. Set all radios to maximum power.
B. Set all APs to the same channel.
C. Enable load balancing of clients across APs.
D. Increase the beacon interval.
Answer: C

Question: 4.
Exhibit 2 Active controller
#
#
sysname HP
#
#
#
#
#
#
#
vlan 1

#
vlan 2
#
domain system
state active
idle-cut disable
#
network 192.168.0.0 mask 255.255.255.0
option 43 hex 80070000 01C0A800 60
#
network 192.168.1.0 mask 255.255.255.0
option 43 hex 80070000 01C0A800 60
#
user-group system
#
local-user admin
service-type telnet
#
wlan rrm
#
ssid HP_Openaccess
bind WLAN-ESS 0
cipher-suite ccmp
security-ie rsn
#
interface NULL0
#
ip address 192.168.0.100 255.255.255.0
#
ip address 192.168.1.100 255.255.255.0
#

#
interface WLAN-ESS0
#
radio 1
service-template 1
radio enable
radio 2
service-template 1
radio enable
#
radio 1
radio 2
service-template 1
radio enable
#
radio 1
radio 2
service-template 1
radio enable
#
radio 1
radio 2
service-template 1
radio enable
#
radio 1
service-template 1
radio enable
radio 2
service-template 1
radio enable
#
dhcp enable
#
ip route-static 0.0.0.0 0.0.0.0 192.168.0.200

#
#
#
return
A university media course uses an auditorium that seats 400 students. Wireless access
points (APs) are installed to provide access to the school's video servers. Students running
802.11n clients are not seeing optimal bandwidth connection data rates. Based on the
exhibits, what is a solution to optimize 802.11n data rates?
A. Disable High Throughput (HT mode) on all radios.
B. Disable RTS/CTS capability on non802.11n client NICs.
C. Configure Band Steering mode on radio 1 on all APs and radio 2 on AP3 and AP5.
D. Configure Greenfield mode on radio1 on all APs and radio 2 on AP3 and AP5.
Answer: D

Question: 5.
#
#
sysname HP
#
#
#
#
#
#
#
vlan 1
#

vlan 2
#
domain system
state active
idle-cut disable
#
network 192.168.0.0 mask 255.255.255.0
option 43 hex 80070000 01C0A800 60
#
network 192.168.1.0 mask 255.255.255.0
option 43 hex 80070000 01C0A800 60
#
user-group system
#
local-user admin
service-type telnet
#
wlan rrm
loadbalance session 5
#
ssid HP_Openaccess
bind WLAN-ESS 0
cipher-suite tkip
security-ie rsn
#
interface NULL0
#
ip address 192.168.0.100 255.255.255.0
#
ip address 192.168.1.100 255.255.255.0
#

#
interface WLAN-ESS0
#
radio 1
service-template 1
radio 2
service-template 1
radio enable
#
radio 1
service-template 1
radio 2
service-template 1
radio enable
#
radio 1
service-template 1
radio 2
service-template 1
radio enable
#
radio 1
service-template 1
radio 2
service-template 1
radio enable
#
radio 1
service-template 1
radio 2
service-template 1
radio enable
#
dhcp enable
#

ip route-static 0.0.0.0 0.0.0.0 192.168.0.200
#
#
#
return
A university media course uses an auditorium that seats 400 students. Students are
experiencing slow network performance, and some clients are having difficulty connecting to
the wireless network. The IT staff installed wireless access points (APs) over a year ago.
Previous classes, consisting of 200 students had no problems. Based on the exhibits, what
is a solution to optimize performance for all students?
A. Enable radio 1 on all APs.
B. Add service-template1 to all 2.4Ghz radios.
C. Remove service-template1 from all 5Ghz radios.
D. Set cipher-suite to ccmp for service-template1.
Answer: A

HP HP0-Y39 Exam
Managing and Troubleshooting Enterprise Wireless Networks
Version = Demo
Total Questions in Original Product = 42
http://www.passcertification.com/HP0-Y39.html
Pass Certification
No1. Test Preparation Resource

Hp0 y39 question answers

More Related Content

What's hot (20)

Similar to Hp0 y39 question answers (20)

Recently uploaded (20)

Hp0 y39 question answers