IMPLEMENTATION OF COMPUTATIONAL TOOLS IN THE TEACHING-LEARNING PROCESS OF MATERIALS STRENGTH

International Journal on Integrating Technology in Education (IJITE) Vol.13, No.3, September 2024
DOI:10.5121/ijite.2024.13301 1
IMPLEMENTATION OF COMPUTATIONAL TOOLS IN
THE TEACHING-LEARNING PROCESS OF
MATERIALS STRENGTH
Martínez Christian, Oñate Fernanda, Iza Johanna, Ramírez Ana and Pinto César
Teacher , Instituto Superior Tecnológico Pelileo , Ambato , Ecuador
ABSTRACT
With the development of this work, we seek to highlight the importance of implementing technological tools
in the study of the subject of material resistance, in order to accompany the teaching-learning process.
Bringing computational tools on par with traditional learning in the classroom by applying a series of
innovative alternatives and work practices, outside the classroom and that meet your expectations of
progress in teaching-learning in fields related to the resistance of materials , who are under their
responsibility aligned with the objective of advancing in the career with practical knowledge.
This research topic was chosen due to the students' deficient knowledge in this area due to reasons such as
late academic reintegration, work-related issues, among others. In addition to the little use of teaching
material by the student, thus harming their comprehensive development. In this work, it is intended to
contribute to the analysis of structures using design software and structural analysis. Interactive videos
will be generated with their resolution, simulations of practices as well as innovative interactive content,
which collaborate for the development of the academic and intellectual potential of the students who take
the subject of resistance of materials.
KEYWORDS
Pedagogy Enhancement with E-Learning, Learning/Teaching Methodologies and Assessment
1. INTRODUCTION
In the last decade, due to the conditions of development of educational technology and its
creative use in teaching both in the classroom and outdoors. This leads to the use of information
technology to create virtual learning spaces; improving the teaching-learning process
synchronously, asynchronously or a combination of both methods. These constructivist models
promote teamwork in the learning environment, citing among others the motivation for reflection,
continuous accessibility and the ability to adapt to the student's learning pace, among others
(Silva-Quirós, 2010).
The educational system has retained small differences with its classic learning model (Gros and
Silva, 2005); For this reason, the use of virtual learning environments (VLE) is seen as a
pedagogical aid that takes education beyond the classroom. Therefore, educational institutions
must include technological tools in the educational process to enhance the independence and
responsibility of students, overcoming the limitations caused by the division of space - time
between teachers and students, flexibility in time and space, and improvement of the
collaborative learning (Raión and Adell, 2009).

2
To advance your career with practical knowledge, it is essential to take advantage of virtual
learning environments as teaching and learning spaces. The digital culture that has emerged in
21st century societies gives us the opportunity to transform the educational process through
information and communication technologies (ICT) (Bustos y la llama, 2010).
With the introduction of virtual learning spaces, the role of the teacher has evolved. Now it is
necessary to acquire knowledge and skills from the educational community, diversifying and
including aspects such as methodological strategies, pedagogical skills, communication skills,
technology and education (Camacho Zúñiga, Lara Alemán and Sandoval Díaz, 2011).
In this sense, it is crucial to implement technological tools in the study of the subject of material
resistance to accompany the teaching-learning process. Integrating computational tools with
traditional classroom learning through innovative and practical alternatives outside the classroom
is essential to progress in the field of teaching-learning in areas related to the resistance of
materials.
The research addresses the deficient knowledge of students in this area due to causes such as late
academic reintegration, issues related to jobs, among others. In addition to the little use of
teaching material by the student, thus harming their comprehensive development. In this work, it
is intended to contribute to the analysis of structures using design software and structural
analysis. Interactive videos will be generated with their resolution, simulations of practices as
well as innovative interactive content, which collaborate for the development of the academic and
intellectual potential of the students who take the subject of resistance of materials.
Technological educational tools for learning design and structural analysis must have certain
characteristics to be effective. Some of these features include:
1. Interactivity: Tools should allow students to interact with the content, whether through
simulations, 3D models, or practical exercises. This promotes active and participatory
learning.
2. Flexibility: Tools should adapt to different learning styles and skill levels. They should
allow students to progress at their own pace and explore concepts in a personalized way.
3. Visualization: Tools should provide clear and realistic visual representations of structures
and designs. This helps students better understand abstract concepts and visualize how they
are applied in practice.
4. Feedback: Tools should offer immediate feedback on student performance, allowing them
to correct errors and improve their understanding of concepts.
5. Integration with the curriculum: The tools must be aligned with the learning objectives and
the course curriculum, so that they reinforce and complement what is taught in the
classroom.
6. Accessibility: Tools should be accessible from different devices and platforms, allowing
students to use them anytime, anywhere.
When choosing technological educational tools for structural analysis and design learning, it is
important to consider these features to ensure that they truly enhance the learning experience for
students.
The main aspects that can be mentioned about educational tools are those related to the different
ways of maintaining learning rhythms, which is why it is teachers and students who establish the
most useful and appropriate resources for the teaching-learning process. .

3
Figure 1 . Tool characteristics.
Education exposes its multiple development scenarios, and among them are those created with
the help of technological tools and applications that help in educational achievement. Comparing
the traditional educational environment with the virtual educational environment, using virtual
education in teaching and learning, there are some benefits such as: greater cooperation and
access to information, the educational process focuses on students, using different tools, for
example. example in Table 1.
Table 1: Contrast traditional and virtual education
Traditional education environment Virtual education environment
· Development of personal
missions.
Include specific information
A unique medium
Direct knowledge of the teacher.
· Mission development
Free access to information
A variety of media
student centered
Even though there are differences between the different definitions of the concept of Virtual
Learning Space (VLE), most authors agree that the main components are: the space, the students,
the teachers, the materials and the didactic strategy for the development of the teaching-learning
process (PEA).
2. METHODOLOGY
The study assumes a strong correlation aspect because the objective is to determine the degree of
association between two variables: academic performance and the use of virtual space (EVA) by
students. This type of research establishes the degree of relationship between two or more
variables, where the first step is to measure the variables, then test the hypothesis using statistical
methods and determine the presence or absence of the correlation. Also in this type of research, if
correlations are not established directly, it is possible to establish possible causes and effects of
the phenomenon studied by Arias (2006).
The study design was semi-experimental due to the contrary hypothesis, but there was no
randomization in the experimental or control groups, shown in Table 2. Steps carried out in the
project:

4
• Selected from an exploratory universe defined by second semester students, with a specific
experimental (44 students) and control (43 students) sample; This is at the discretion of the
researcher.
• Previously, it was coordinated with the teachers of the subject to master the contents that
were considered difficult to carry out in the virtual learning space on the simulation
platform and with the students learning the subject with this tool.
• The researcher selects the students from the experimental and control groups. Stimulation
was applied only to the experimental group (via VAS) to allow comparisons to be made
between the two groups (control group without stimulation).
Table 2 : Distribution of groups
Groups Procedure
Experiment
al
Learning structural analysis and design with the use of
virtual learning spaces
Control Learning structural analysis and design without the use
of virtual learning spaces
• The design of the semi-experimental study was established as follows: in the
experimental group, initial test, stimulation and final test were used; control group: use
only pre- and post-tests, indicated in Table 3.
Table 3: Stimulus application
Groups Pre-test Stimulus Post-test
Experi
mental
YEAH YEAH YEAH
Control YEAH NO YEAH
• The students and the subject teacher were trained, according to the roles assigned in
Moddle to be able to implement the activities through it.
• The stimulus applied to the experimental group consisted of the use of a Virtual Learning
Space designed on the Moddle platform for learning the resistance of materials. Figure 2
shows the planned activities and resources on the contents such as: inequalities,
exponential functions. and logarithmic, linear equations, among others; highlighting all the
topics considered most difficult.

5
Figure 2. Evidence of the activities and resources applied in Moddle.
• The students in the control group did not carry out the activities related to the use of the
designed EVA that the experimental group did use.
• Finally, the results (performance) obtained from the experimental and control groups
obtained in the pre- and post-test were compared. The data used were the material
resistance scores corresponding to partial 1 (the pre-test), and partial 2 (the post-test). This
process is detailed and described in the subsequent section called: “Results of the student
satisfaction survey when using the EVA for learning the resistance of materials.”
2.1. Actions to collect and Process Data
To carry out the research project, the various designed instruments were applied to each group of
participating individuals.
2.1.1. Study of the interview applied to teachers
An interview was conducted with two teachers of the second semester course who teach the
subject of resistance of materials, to inquire about the usual activities they carry out when
teaching their classes. It was also important to know their position regarding the use of Virtual
Learning Spaces; It was also useful to identify important aspects about the contents to be
implemented in the virtual tool to be designed.
The interview allowed us to know the level of knowledge and skills of the teachers in the use of
this type of tools for the teaching process; and identify their weaknesses, in order to guide them
in the use of this platform and make it a useful tool for the teaching process. In summary, the
interview conducted consulted the following aspects:
· Regular activities developed in classes
· Teacher's position regarding the use of EVA's.
· Teacher's knowledge of technological tools or resources for teaching the resistance of
materials.
· Contents chosen from the subject due to their complexity, to be included in the design of an
EVA for teaching - learning the resistance of materials. This process is detailed and
described in the subsequent section called: “ Results of the student satisfaction survey
when using the EVA for learning the resistance of materials .”

6
2.2. Selection of Material Resistance Contents for EVA
With the help of the subject teachers, a review and analysis of the material resistance content of
the second partial was carried out. Based on their experience, the work material in the EVA was
developed, taking into account the most complex topics for student learning. The topics agreed
upon with the teachers were: Inequalities and functions, shown in Table 4.
Table 4: Resistance contents of materials selected for EVA application
Issue Subtopic
Topic 1: Mechanical
properties of
materials
Subtopic 1: Elasticity
- Elastic behavior of materials
- Modulus of elasticity
- Hooke's law
- Elastic stress-strain diagram
Subtopic 2: Plasticity
- Plastic behavior of materials
- Creep
- Ductility
- Elastic limit and yield limit
Topic 2: Analysis of
stresses and
deformations
Subtopic 1: Stresses in structural elements
- Axial forces
- Shear stresses
- Bending stresses
- Combined efforts
Subtopic 2: Deformations in structural elements
- Unitary deformations
- Stress-strain relationship
- Bending deformations
- Torsion deformations
Prepared by: Oñate, 2023
In addition, we worked together with the teachers in planning the activities to be proposed in the
EVA, which were worked on simultaneously with the contents covered in the class; and
constitute a support for the teaching-learning process. The activities developed for students in the
virtual classroom are autonomous (carried out by the student outside the classroom), which had
due support and tutoring from the teachers; to generate in the student interest in practicing and
learning in an interactive way.
2.3. Guidelines for the Use of Virtual Learning Spaces
Before using the EVA, training was carried out for students and teachers on access and use of the
resources available in the virtual classroom, shown in Table 4. The participants were previously
registered on the platform, with the corresponding roles. configured.

7
Table 4: Guidelines for using the Moddle platform
Steps to enter the designed virtual classroom
1. Enter your preferred search engine and place the following link
https://resistencia dematerialessecond semester.milaulas.com/
2. Click on access
3. Enter the username and password
For the user and password, take the following into account. Your
username is your first name followed by a period and your first last
name.
Example: Carlos Daniel Zapata Valle
User: carlos.zapata
Key: Alg_niv2019
Note: All users have been registered with the same
password, which must be changed after the first access.
Source: Syllable of the subject of resistance of materials, 2023
2.4. Application of the Quasi-Experimental Design
Firstly, the grades (averages) obtained by the students during the first partial were taken into
account as a pre-test, in this way the level of knowledge (performance) of the students in the
subject of resistance of materials could be established. , considering that these contents were
studied in a similar way by the experimental and control groups during the second semester.
During the second partial, the students of the experimental and control group studied the same
contents of the subject of resistance of materials in Table 4. The teaching methodology used in
the classroom by the teacher was the same; The difference was that with the students of the
experimental group they carried out the different activities proposed in the EVA that are
described below:
1. A file was placed with organized and summarized information on each topic, and solved
exercises of medium and high level of complexity.
2. A video was shared, with the explanation of the topics studied, where various ways of
analyzing a certain case or topic are presented.
3. A chat was enabled for synchronous communication, whose objective was: to help students
with their doubts or problems regarding the study content. The chat remained enabled
during the class days corresponding to each parallel.
4. Tasks were proposed to be developed by the students; which were part of a workshop, and
whose objective was work and collaboration between peers.
5. The last phase applied in this process was the evaluation, which was carried out through
questionnaires, which made it possible to measure the level of knowledge acquired in each
topic reviewed with the students (control group).
The estimated time of use of the EVA for the activities assigned by each topic was 2 hours;
period in which it was estimated that the student could carry out the tasks planned in the different
modules.

8
In addition, we worked with the tool for the study of the second topic corresponding to the
analysis of functions, considering that it is complex for students to make graphs that facilitate
their understanding.
Once the EVA application phase has been completed with the students in the experimental group,
and the conventional work with the individuals in the control group; Both groups were evaluated
with a similar post-test; That is, the same evaluation instrument and grading parameters used in
the second partial were used; this to establish the level of learning (grades) of the contents
studied. The results of this post - test were correlated with the data obtained in the pre - test.
To finish the process of applying the research design, a satisfaction survey was applied to the
students of the experimental group of the use of the EVA designed for learning the resistance of
materials, this to know their position and experiences of using the virtual classroom. , and the
activities developed that were included in the work platform for learning this subject. All of this
is evaluated and analyzed in the following section.
3. ANALYSIS OF RESULTS
Several research techniques and instruments were included in the research design, with the
purpose of gathering sufficient information to establish the presence of a relationship between the
use of Virtual Learning Spaces and the level of learning resistance of materials. The results
obtained from the application of each of these instruments are presented below.
In order to establish the relationship between the Use of Virtual Learning Spaces vs. Learning
through academic performance in the subject of mechanics of materials by second semester
students, the Fisher statistic was used, a test that allows establishing the relationship between two
categorical variables, using a 2x2 cross table and in this way allows us to verify the hypothesis
defined for the present investigation.
For which the grade records of the first midterm and second midterm were taken, both from the
experimental group and the control group.
In relation to the experimental group shown in Table 5, 52.3% have low performance before
receiving the stimulus to use the EVA, and after it, the percentage is reduced to 22.2%; That is,
one in three (30.1%) of the second semester students improved their learning, measured by
grades obtained in the second partial in the subject of mechanics of materials.
Table 5: Pre-test and post-test notes of the experimental group
Pre-Test Post-Test
Number of low-performing students 23 8
Number of students with acceptable
performance
twenty-one 36
Source: Record of qualifications for materials mechanics subject, 2023
On the other hand, the results of the control group in Table 6 determine that 80.9% have low
performance before the experimental group received the stimulus (use of the EVA). The
subsequent result (from the post-test) is 50.0%; with low performance; That is, like the

9
experimental group, one in three (30.9%) of the second semester students belonging to it
improved their learning in materials mechanics.
Table 6: Pre-test and post-test notes of the control group
Pre-Test Post-Test
Number of low-performing students 3. 4 14
Number of students with acceptable
performance
8 28
Based on these results, the experimental group has 22.2% of students with low performance, and
the control group has 50.0%; That is, there is a percentage difference of 30%, which establishes
that one in three second semester students improved their learning of materials mechanics by
using the EVA.
To verify this result, the Snedecor F test was used with a significance level of 0.05. The p-value
obtained for a one-sided test was 0.01 in Table 7: that is, it is below the level of significance,
therefore, the null hypothesis is rejected (Ho) and the alternative hypothesis is accepted (H1 ),
this is:
The use of a Virtual Learning Space (EVA) allows improving the level of learning (performance)
of the subject of materials mechanics by second semester students of the period June - September
2023.
Table 7: Fisher statistics of the experimental and control group
Exact
significance
(two-sided)
Exact
significance
(one-sided)
Experimental
Group
.002 .001
Control group ,000 ,000
Finally, it is important to note that the students in the experimental and control groups have
similar behavior, since the grades obtained in both groups improve notably in the second partial.
Particularly, after analyzing it, it is given to an external factor, which is defined as the need for
students to pass the second semester, so the grades obtained during the second partial for both
groups are relatively better than those obtained during the first. partial. But also due to the results
obtained, the experimental group improved the results compared to the control group due to the
use of the Virtual Learning Space.

10
4. CONCLUSIONS
Researchers and theorists who study Virtual Learning Spaces establish and agree that it is
pertinent and relevant to use these virtual technological spaces in the teaching-learning of the
subject of materials mechanics. Its use will generate interest and motivation in students;
Furthermore, it allows them to build their own knowledge in their own time and actively and
participatively develop new skills and abilities in the area.
Theoretically, it is established that the activities planned in an EVA must be correctly selected
and planned according to the theme, level of difficulty and contents that are to be taught; since
adequate selection and planning will allow the learning objectives and achievements to be met.
The teachers of the materials mechanics subject work on the calculation of materials with
traditional methods, but they do apply various technological tools in the development of their
courses.
The teacher's knowledge of EVA's is limited, as are their skills for using this technological tool in
the teaching-learning of the subject of materials mechanics.
Based on the teaching direction, the themes of inequalities and functions were selected to work
on the relevant contents and activities that were integrated into the designed virtual classroom,
which was used by the experimental group formed for the research, and which at the discretion of
the students They were very suitable for their learning.
Since the calculated p-value was 0.01, and is less than the 0.05 level of significance, it was
determined that statistically there is a relationship between the use of the EVA with learning
(academic performance) in the subject of materials mechanics. the second semester students of
the Pelileo Higher Technological Institute.
The satisfaction survey applied to the students made it possible to demonstrate the favorable
position of the students with the use of the EVA's as a complement to their face-to-face study
process; since according to their criteria, it allowed them to reinforce knowledge, provide
feedback on content and awaken interest in collaborative work; being an active and fundamental
part in the construction of their own knowledge.
Using the F test, it was determined that there is a relationship between the use of the EVAS and
the learning of mechanics of materials. This was determined by comparing the scores obtained in
the pre- and post-test applied to the students in the experimental and control groups.
The percentage comparison of the low performance of the students in the control and
experimental group determines that there was no difference between the student groups; situation
that can be associated with other factors that are always present in educational processes and that
require research. One reason that may be associated with this result may be due to the need to
complete the minimum required to pass the subject.
ACKNOWLEDGMENTS
The authors thank the higher education institutions that contributed to the research with their
authors, as place of work such us: Instituto Superior Tecnológico Pelileo-Baños, Baños, Ecuador

11
REFERENCES
[1] Arias, FG (2006). The Research Project Introduction to scientific methodology.
[2] Caracas, Bolivarian Republic of Venezuela: Editorial Episteme.
[3] Camacho Zúñiga, MG, Lara Alemán, Y., & Sandoval Díaz, G. (2011). Teaching and its role in
virtual learning environments. Educational technology area, 15.
[4] Carlos Vega, FD (JULY 2015). Teaching basic mathematics in an e-Learning environment: a case
study of the Manuela Beltrán Virtual University. Teaching basic mathematics in an e-Learning
environment: a case study of the Manuela Beltrán Virtual University. (EAN, Ed.) Bogóta,
COLOMBIA: EAN.
[5] Castro, CM (2012). Problem solving for the development of mathematical competence in early
childhood education. Journal of mathematics teaching, 80, 53-70.
[6] Alsina. (2004). Development of mathematical skills with playful-manipulative resources. . Madrid,
Madrid, Spain: Narcea.
[7] Adrián Martínez Gonzalez, AF (2016). Pedagogical references and teaching strategies of the
professors of the Master's Degree in Biochemical Sciences at UNAM. Retrieved on 10/12/2020,
from Pedagogical references and teaching strategies of the professors of the Master's Degree in
Biochemical Sciences at UNAM:
http://publicaciones.anuies.mx/pdfs/revista/Revista120_S2A2ES.pdf
[8] Beccaria, R. (2005). The insertion of computing in education and its effects on labor reconversion.
(1 ed.). (I. d. SEPA, Ed.) ARGENTINA.
[9] Bernal, C. (2010). Investigation methodology. Colombia: Pearson.
[10] Biswas, C. (2015). The importance of mathematics in everyday life. Retrieved on 4 of 5, 2021, from
http://timesofindia.indiatimes. com/city/guwahati/The-importance-of-maths-in-everyday-life/
articleshow/48323205.cms: http://timesofindia.indiatimes. com/city/guwahati/The-importance-of-
maths-in-everyday-life/articleshow/48323205.cms
[11] Brousseau. (1983). Les obstacles épistémologiques et les problémes en mathématiques. Recherches
en Didactique des Mathématiques, 165-198.
[12] Dorfsman. (2012). Teaching and Technologies at the Higher Level: “Augmented teaching” and the
“global teacher.” Retrieved on April 14, 2021, from https://www.um.es/ead/red/39/dorfsman.pdf:
https://www.um.es/ead/red/39/dorfsman.pdf
[13] Karadag. (2009). Analyzing Students' Mathematical Thinking in Technology-Supported
Environments. Toronto, Toronto, CANADA: University Toronto T.
[14] Kieran, C. (2006). Research on the learning and teaching of mechanics of materials. Handbook on
the Psychology of Mathematics Education. Past, Present and Future.
[15] MENU (1998). Math. Curricular guidelines, Ministry of National Education. Retrieved on April 12,
2021, from https://www.redalyc.org/pdf/206/20643042011.pdf:
https://www.redalyc.org/pdf/206/20643042011.pdf
[16] MOODLE. (sf). moodle.org. (moodle.org, Editor, https://moodle.org/, Producer, &
https://moodle.org/) Retrieved on JUNE 14, 2020, from https://moodle.org/: https:// moodle.org/
[17] Muñiz, J. (2010). The Use of Tests and other Instruments. International Test Commission, 11.
[18] Niss. (2002). Mathematical competencies and the learning of mathematics. Denmark: The Danish
KOM Project.
[19] Palarea M., &. S. (1994). Some cognitive obstacles in learning the mechanics language of materials.
SUM, 91-98.
[20] Pajarez, RS (2004). Approach to an evaluation model: the PISA 2000 project. Madrid, Madrid,
Spain: Ministry of Education, Culture and Sports.
[21] Ridgway, J. N. (2011). developing statistical literacy in students and teachers. Teaching Statistics in
School Mathematics - Challenges for Teaching and Teacher Education: A Joint ICMI/IASE Study:
The 18th ICMI Study, 311-322.
[22] Sabarwal, H. W. (2014). Quasi-experimental design and methods (Vol. 8). Florence, Italy: UNICEF.
[23] Silbey. (2003). Math out loud! Instructor. (Vol. 112).
[24] Silva Yumi, JE, & López Pástor, RE (2020). Application of Kolb's experiential methodology
supported by the use of the mobile phone and its relationship with the academic performance of
sixth semester students of the subject of chemical kinetics and catalysis of the School's chemistry
major. University of the Armed Forces ESPE, 98.

12
[25] Socas, M. (1997). Difficulties and errors in learning Mathematics in Secondary School.
Mathematics education in secondary education, 125-154.
[26] Tellería, M. (JANUARY 9, 2004). Journal of Theory and Didactics of Social Sciences. Journal of
Theory and Didactics of Social Sciences. (U. d. Andes, Ed.) Mérida, VENEZUELA: Universidad de
los Andes.
[27] Tobón. (2007). Competency-based training. Complex thinking, curriculum design and didactics.
Colombia: Ecoe Ediciones.
[28] UNIVERSITY OF THE ARMED FORCES ESPEL. (2021). Continuing Education Center.
Retrieved on 4/12/2021, from https://espe-el.espe.edu.ec/educacion-continua/: https://espe-
el.espe.edu.ec/educacion-continua/
[29] UTN. (17 of 10, 2017). utn.ac. Retrieved on JUNE 17, 2020, from Learning Activities in a Virtual
Environment: http://ftp.campusvirtual.utn.ac.cr/e-
learning/Actividades%20de%20aprendizaje%20en%20un%20EVA.pdf
[30] Villalobos, M. (2017 NOVEMBER 15). Technological Tools in Education. Technological Tools in
Education, 1(1). (U. d. Celaya, Ed.) Celaya, MEXICO: University of Celaya.
[31] William Oswaldo Flores López, EA (2016). The problems of understanding the mechanics of
materials in university students. HIGHER EDUCATION, 19, 54-65.

13
Photo
Photo
AUTHORS
María Fernanda Oñate Pico. - Master in Higher Education (Universidad de Fuerzas
Armadas ESPE), Teacher in technical specialty (Instituto Superior Tecnológico
Pelileo-Baños), Mathematics Teacher (La Salle Ambato Unit), Mechatronics
Engineering (Universidad de Fuerzas Armadas ESPE), FINANCIAL MANAGER of
the company IA-KUNTUR SASBIC dedicated to the development of artificial
intelligence and data science located in the city of Latacunga-Ecuador.
Christian Andrés Martínez Andino, master in civil engineering with mention in
metallic structures (Technical University of Amabto), Teacher in technical specialty
(Pileo-Baños Higher Technological Institute), Mechanical Engineer Technical
University of Ambato)
Johanna Estefanía Iza Iza. - Master in Electricity with mention in electrical power
systems (Universidad Técnica de Cotopaxi), Teacher in technical specialist (Instituto
Superior Tecnológico Pelileo-Baños), Mechatronics Engineering (Universidad de
Fuerzas Armadas ESPE)
César Enrique Pinto Bocancho. - Industrial Engineer in Automation Processes
(Universidad Técnica de Ambato UTA), Teacher in technical specialty (Instituto
Superior Tecnológico Pelileo-Baños).
Ana del Cisne Ramírez Rivera - Engineer Systems (Universidad Técnica de
Ambato UTA), Teacher in technical specialty (Instituto Superior Tecnológico
Pelileo-Baños).

IMPLEMENTATION OF COMPUTATIONAL TOOLS IN THE TEACHING-LEARNING PROCESS OF MATERIALS STRENGTH

More Related Content

Similar to IMPLEMENTATION OF COMPUTATIONAL TOOLS IN THE TEACHING-LEARNING PROCESS OF MATERIALS STRENGTH (20)

Recently uploaded (20)

IMPLEMENTATION OF COMPUTATIONAL TOOLS IN THE TEACHING-LEARNING PROCESS OF MATERIALS STRENGTH