Implementation of payroll in tally erp 9

Implementation of
Payroll in Tally.ERP 9

The information contained in this document is current as of the date of publication and subject to change. Because Tally must respond
to changing market conditions, it should not be interpreted to be a commitment on the part of Tally, and Tally cannot guarantee the
accuracy of any information presented after the date of publication. The information provided herein is general, not according to
individual circumstances, and is not intended to substitute for informed professional advice.
This document is for informational purposes only. TALLY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, IN THIS
DOCUMENT AND SHALL NOT BE LIABLE FOR LOSS OR DAMAGE OF WHATEVER NATURE, ARISING OUT OF, OR IN
CONNECTION WITH THE USE OF OR INABILITY TO USE THE CONTENT OF THIS PUBLICATION, AND/OR ANY
CONDUCT UNDERTAKEN BY PLACING RELIANCE ON THE CONTENTS OF THIS PUBLICATION.
Complying with all applicable copyright and other intellectual property laws is the responsibility of the user. All rights including
copyrights, rights of translation, etc., are vested exclusively with TALLY SOLUTIONS PRIVATE LIMITED. No part of this document
may be reproduced, translated, revised, stored in, or introduced into a retrieval system, or transmitted in any form, by any means
(electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Tally
Solutions Pvt. Ltd.
Tally may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this
document. Except as expressly provided in any written licence agreement from Tally, the furnishing of this document does not give you
any licence to these patents, trademarks, copyrights, or other intellectual property.
© 2009 Tally Solutions Pvt. Ltd. All rights reserved.
Tally, Tally 9, Tally9, Tally.ERP, Tally.ERP 9, Shoper, Shoper 9, Shoper POS, Shoper HO, Shoper 9 POS, Shoper 9 HO,
TallyDeveloper, Tally Developer, Tally.Developer 9, Tally.NET, Tally Development Environment, Tally Extender, Tally Integrator,
Tally Integrated Network, Tally Service Partner, TallyAcademy & Power of Simplicity are either registered trademarks or trademarks of
Tally Solutions Pvt. Ltd. in India and/or other countries. All other trademarks are properties of their respective owners.
Version: Implementation of Payroll in Tally.ERP 9/1.8/June 2010

i
Contents
Introduction .............................................................................................................................................................................1
Lesson 1: Configuring Payroll in Tally.ERP 9
1.1 Salient Features of Payroll in Tally.ERP 9 ..............................................................................................2
1.2 Enabling Payroll in Tally.ERP 9 ...............................................................................................................3
Lesson 2: Creation of Payroll Masters
2.1 Employee Setup ............................................................................................................................................9
2.1.1 Employee Groups ....................................................................................................................................9
2.1.2 Employee Master ..................................................................................................................................10
2.2 Payroll Masters ...........................................................................................................................................12
2.2.1 Payroll Units .........................................................................................................................................12
2.2.2 Attendance/ Production Types ..............................................................................................................14
2.3 Pay Heads ....................................................................................................................................................16
2.3.1 Earning Pay Heads ...............................................................................................................................17
2.3.2 Deduction Pay Heads ...........................................................................................................................33
2.3.3 Gratuity Pay Head ................................................................................................................................44
2.4 Salary Details Setup ..................................................................................................................................47
Lesson 3: Processing Payroll in Tally.ERP 9
3.1 Attendance Vouchers .................................................................................................................................56
3.2 Payroll Vouchers ........................................................................................................................................64
3.2.1 Cash Remittance ...................................................................................................................................64
3.2.2 Bank Transfer .......................................................................................................................................69
3.2.3 Payment of Salaries (Salary Disbursement) .........................................................................................74
Lesson 4: Accounting for Employer PF Contributions
4.1 Creation of Employer PF Contribution Masters ...................................................................................79
4.2 Salary Details setup ...................................................................................................................................93
4.3 Processing Employer PF Contribution ...................................................................................................95
4.4 Processing PF Admin Expenses ..............................................................................................................98
4.5 Payment of Provident Fund ...................................................................................................................102
Lesson 5: Accounting for Employer ESI Contributions
5.1 Creation of Employer ESI Contribution Masters ...............................................................................111
5.2 Salary Details setup .................................................................................................................................115
5.3 Processing Employer ESI Contribution ...............................................................................................117
5.4 Payment of ESI .........................................................................................................................................119

Contents
ii
Lesson 6: Payment of Professional Tax
6.1 Processing of Professional Tax Payment .............................................................................................128
Lesson 7: Tracking of Salary Advances / Loans
7.1 Creation of Masters ..................................................................................................................................133
7.2 Modify / Alter Salary Details .................................................................................................................135
7.3 Payment of Salary Advance ...................................................................................................................136
7.4 Recovery of Salary Advance ..................................................................................................................140
Lesson 8: Accounting for Pay Revision & Arrears
8.1 Salary Revision / Arrear Calculation for Prior Period .......................................................................143
8.2 Salary Revision / Arrear Calculation for current Period ...................................................................149
Lesson 9: Processing Payroll for Contract Employees
9.1 Create Employee Masters .......................................................................................................................155
9.2 Create Pay Heads .....................................................................................................................................156
9.3 Record Attendance details ......................................................................................................................159
9.4 Process Payroll .........................................................................................................................................161
Lesson 10: Payroll Reports
10.1 Payroll Reports .......................................................................................................................................164
10.1.1 Pay Slip 165
10.1.2 Multi Pay Slips ..................................................................................................................................177
10.1.3 Pay Sheet ..........................................................................................................................................181
10.1.4 Payroll Statement ..............................................................................................................................192
10.1.5 Payment Advice ................................................................................................................................196
10.1.6 Payroll Register ................................................................................................................................199
10.1.7 Employee Pay Head Breakup ...........................................................................................................201
10.1.8 Pay Head Employee Breakup ...........................................................................................................205
10.1.9 Attendance Sheet ...............................................................................................................................208
10.1.10 Attendance Register ........................................................................................................................211
10.2 Expat Reports .........................................................................................................................................213
10.2.1 Passport Expiry Report .....................................................................................................................213
10.2.2 Visa Expiry Report ............................................................................................................................215
10.2.3 Contract Expiry Report .....................................................................................................................217
10.3 Payroll Statutory Reports ......................................................................................................................218
10.3.1 Provident Fund Reports ....................................................................................................................219
10.3.2 Employee’s State Insurance Reports ................................................................................................236
10.3.3 Professional Tax Reports ..................................................................................................................252
10.3.4 Gratuity Report .................................................................................................................................257

1
Introduction
The term Payroll refers to a series of accounting transactions involved in the process of paying
employees for the services rendered after taking all the statutory and non-statutory deductions
into account, in conformance with the terms of employment, company policy and the law of the
land i.e., payment of payroll taxes, insurance premiums, employee benefits and other deductions.
An efficient payroll system facilitates an error-free, accurate and timely employee payment while
ensuring that the employment is well within the valid work permit.

2
Lesson 1: Configuring Payroll in Tally.ERP 9
Payroll in Tally.ERP 9 is easy to use and can handle all the functional, accounting and statutory
requirements of the payroll department.
1.1 Salient Features of Payroll in Tally.ERP 9
The key features of the Payroll functionality in Tally.ERP 9 are as follows:
It is fully integrated with accounts to give you the benefits of simplified Payroll processing
and accounting.
It has user defined classifications and sub-classifications for comprehensive reporting.This
may be related to the employees, employee groups, pay components, departments etc.
It provides the facility to create user-defined earnings and deductions Pay Heads.
It allows flexible and User-definable criteria for simple or complex calculations.
It allows unlimited grouping of Payroll Masters.
It supports user-defined production units i.e., attendance/ production/ time based remuner-
ation units.
It provides a flexible payroll processing period.
It provides comprehensive Cost Centre as well as employee-wise costing reports
It ensures an accurate & timely Salary Processing, Employee Statutory Deductions &
Employer Statutory Contributions with the help of predefined processes.
It provides auto-fill facility to expedite the Attendance, Payroll & Employer Contributions
processes.
Lesson Objectives
On completion of this lesson, you will have learnt:
The features of Payroll in Tally.ERP 9
How to enable Payroll in Tally.ERP 9

Configuring Payroll in Tally.ERP 9
3
It facilitates an accurate computation and deduction of ESI, EPF, Professional Tax, Gratuity
etc.
It helps in the generation of Statutory Forms & Challans for EPF & ESI, as prescribed.
It allows to drill-down to voucher level for any kind of alteration.
It facilitates computation of arrears pertaining to prior period(s).
It helps in tracking employee loan details.
1.2 Enabling Payroll in Tally.ERP 9
In Tally.ERP 9 activation of Payroll requires a one time simple setup. Create a new company in
Tally.ERP 9 and follow the steps given below to enable Payroll.
Case Study Company
M/s. Spectrum Software Solutions is engaged in the Software services Business. It is a
Bangalore-based company with the following three major departments:
Sales
Administration
R & D
Step 1: Company Setup
Go to Gateway of Tally > Company Info. > Create Company
In the Company Creation screen,
Select India in the field Statutory compliance for from the List of Countries provided
Type 1-4-2009 as the Financial Year from date and press Enter

4
The completed Company Creation screen is displayed as shown:
Figure 1.1 Company Creation screen
Press Enter to Accept the completed Company Creation screen
Step 2: Enable Payroll
Go to Gateway of Tally > Press F11: Company Features > press F1: Accounting Features
In the F11: Accounting Features screen:
Set Maintain Payroll to Yes
Set More than ONE Payroll / Cost Category to Yes

5
The completed F11: Accounting Features screen is displayed as shown:
Figure 1.2 F11: Accounting Features screen
Press Enter to Accept the F11: Accounting Features screen
The option More than ONE Payroll / Cost Category is set to Yes, when
separate cost categories are created to allocate Employee cost. In cases,
where only one cost category i.e., primary cost category is used to allocate
multiple cost centres, this option may be set to No.
Once the Payroll feature is activated in Tally.ERP 9, the following two new options get activated in
the F11: Statutory & Taxation Master
Step 3: Enable Payroll Statutory Features
Go to Gateway of Tally > press F11: Company Features > press F3: Statutory & Taxation
In F11: Statutory & Taxation Features screen:
Set Enable Payroll Statutory to Yes

6
Set Set/Alter Payroll Statutory Details to Yes
Figure 1.3 F11: Statutory & Taxation Features screen
Press Enter
In the Payroll Statutory Details screen:
Enter the Provident Fund & Employee State Insurance details of the company as
shown:
Figure 1.4 Payroll Statutory Details screen

7
Press Enter to Accept the screen and go back to F11: Statutory & Taxation Features
screen
Press Ctrl+A to Accept the screen.
Provident Fund
Company Code: This field denotes the Provident Fund Code of the Com-
pany allotted by the Department.
Company Account Group Code: This field denotes the Provident Fund
Group Code of the Company allotted by the Department.
Company Security Code: This field denotes the Security Code of the Com-
pany allotted by the Department.
Employee State Insurance
Company Code: This field denotes the ESI Code of the Company allotted by
the Department.
ESI Branch Office: This field denotes the nearest ESI office under whose
jurisdiction, the company is situated.
Standard Working days (per month): This field denotes the consistent Pay
Period to be considered for ESI Calculation. If this field is left blank, the calcu-
lation is done based on the Calendar days in each month.

7
Lesson 2: Creation of Payroll Masters
Lesson Objectives
On completion of this lesson, you will have learnt how to:
Create Payroll Masters in Tally.ERP 9

Creation of Payroll Masters
8
The Payroll feature in Tally.ERP 9 requires minimal effort for accurate payroll processing. It takes
five easy steps to process payroll & generate Pay Slip in Tally.ERP 9.
Figure 2.1 Payroll Cycle
Essentially, Payroll involves the calculation of amounts due for an employee on the following
basis:
Pay on Hourly wages
Pay on a fixed basis such as certain amount per week, per month and so on
Pay to sales persons on commission
Reimbursement of expenses such as travel expenses, either as paid by the employee or
based on per item rate
Pay on the basis of number of pieces produced/ manufactured/ sold
It is therefore essential to quantify the following payroll information for the purpose of computation
of payments to employees. For this purpose, the following Payroll masters have to be created in
Tally.ERP 9 in the manner as discussed:
Employee Masters
Payroll Masters
Pay Heads

9
Salary Details
2.1 Employee Setup
The Employee Master records employee information – department, date of joining, date of
leaving, ID number, designation, location, function, employee bank details, statutory details,
Passport and Visa details, and so on.
Tally.ERP 9 provides the flexibility to create the Employees and Group them under specific
Employee Group which in turn can be created under specific Employee Categories.
The following masters can be created in Tally.ERP 9 to successfully record the Employee Details:
Employee Category
Employee Groups
Employees
2.1.1 Employee Groups
Businesses with multiple departments, divisions, functions or activities may create the required
employee groups and classify individual employees under a specified group i.e., Production,
Sales, Marketing, Stores, Support or a particular group of employees such as managers, supervi-
sors, sub-staff and so on.
To create Sales as an Employee Group:
Go to Gateway of Tally > Payroll Info. > Employee Groups > Create
In the Employee Group Creation screen,
1. Select Primary Cost Category as the Category (You can also create a separate cost cate-
gory to segregate Employee Cost based on respective categories)
2. Type Sales as the Name of the Employee Group
3. Select the group as Primary (Tally.ERP 9 allows an unlimited grouping of Employee Groups)
The Employee Category will provide an additional level to classify the
Employees in a logical manner. In the case study, in this book all the
Employee Groups are created under Primary Cost Category, hence creation
of an additional Category is not shown.

10
The Employee Group Creation screen is displayed as shown:
Figure 2.2 Employee Group Creation screen
4. Press Enter to Accept the Employee Group Creation screen
Similarly, create the other Employee Groups such as Administration and R&D.
2.1.2 Employee Master
After creating the Employee Groups, create individual Employee Masters, with or without
grouping them, under the Employee Group Master.
In Tally.ERP 9, you can record all the necessary information of the employees in the Employee
Masters. Tally.ERP 9 also allows you to enter the Statutory, Expat and Contract details of the
employees.
To display the options for entering the Statutory, Expat and Contract details enable these options
from the Company Configuration screen as explained below:
Go to Gateway of Tally > F12:Configure > Payroll Configuration
Set the following options:
Show Statutory Details to Yes
Show Passport & Visa Details to Yes
Show Contact Details to Yes

11
The F12: Payroll Configuration screen is displayed as shown:
Figure 2.3 F12: Payroll Configuration screen
Press Enter to Accept
Tally.ERP 9 allows you to configure the above settings from the Employee
Creation screen by pressing F12: Configure.
The information to be printed in the Payment Advice is automatically pre-
filled in Tally.ERP 9. However, you can also modify the same as per your
requirements.
Pay Slip Note will be printed if you does not want the Authorised details
to be printed while emailing or printing the Pay Slips if set to Yes in the
F12: Configuration.
A customised message for specific occasion can be entered as Pay Slip
Message and will be printed if set to yes ion F12 screen while emailing
or printing.
Create the following Employee Masters:
Go to Gateway of Tally > Payroll Info. > Employees > Create
In the Employee Creation screen,
1. Select the Primary Cost Category as the Category
2. Type the Name of the Employee as Vijay Kumar
3. Specify the Name of the Employee Group as Administration in the field ‘Under’
Employee Name Department Date of Joining
Vijay Kumar Administration 1-4-2009
Rahul R&D 1-4-2009
Mahesh Sales 1-4-2009
Ajay Sales 1-4-2009

12
4. Specify the Date of Joining as 01-04-2009
5. Type the other details of the employee as shown:
Figure 2.4 Employee Creation screen
6. Press Enter to Accept the screen
The option Date of Leaving and Reason for Leaving will be available only in
the Alteration mode.
Similarly, create the Employee Masters for other employees with their respective departments.
2.2 Payroll Masters
As discussed in the above section Pay components are computed based on the Payroll Units.
Therefore, create the following Payroll masters in Tally.ERP 9:
Payroll Units
Attendance / Production Types
2.2.1 Payroll Units
A payroll unit refers to a unit of measurement based on which pay heads are calculated. Payroll
units can be classified into two types viz., Simple Payroll Units and Compound Payroll Units.
Simple Payroll Units refer to individual units such as Day, Week, Month, Hours, Pcs, Box, Nos
etc., Whereas, Compound Payroll Units refer to Units which are combination of two simple units,
i.e., an Hour of 60 Minutes, Month of 26 days, Day of 8 Hrs.
Usually, the Pay components are computed based on a single or compound payroll units.
Sometimes an employee may be paid on the basis of a combination of two or more units. For

13
example, an employee is paid a regular salary and an hourly rate for the overtime hours. In this
case, the two likely units are Calendar Month and Hours. In Tally.ERP, you can create simple as
well as compound units.
By default, Tally.ERP 9 contains four preset Calculation Periods – Days, Fortnights, Months &
Weeks. However, you can also create new Payroll Units based on your business requirements.
i. Simple Payroll Units
Go to Gateway of Tally > Payroll Info. > Units (Work) > Create
In the Unit Creation screen,
1. Simple is defaulted as the Type of Unit
2. Specify Hrs as the Symbol
3. Type Hours as the Formal Name
4. Specify 2 as the Number of Decimal Places
The completed Unit Creation screen is displayed as shown:
Figure 2.5 Simple Unit Creation screen
5. Press Enter to Accept the Unit Creation screen.
Similarly, create Minutes as another Simple Unit.
ii. Compound Payroll Units
Create Hrs of 60 Mins as a Compound Unit.
In the Unit Creation screen:
1. Press Backspace and select Compound as the Type of Unit
2. Specify Hrs as the First Unit
3. Enter 60 as the Conversion
Name Type Symbol
Hours Simple Hrs
Minutes Simple Mins
Hrs of 60 Mins Compound Hrs of 60 Mins

14
4. Specify Mins as the Second Unit
Figure 2.6 Compound Unit Creation screen
5. Press Enter to Accept the Unit Creation screen.
2.2.2 Attendance/ Production Types
Attendance/Production Type masters are used to record the nature of attendance/ production i.e.,
time and work rate. In Tally.ERP 9, you can create Attendance types based on time such as
Present and Absent or based on work based production units such as Piece productions,
Sales performance and so on.
Create the following Attendance Types for M/s. Spectrum Software Solutions.
i. Present Attendance Type
Go to Gateway of Tally > Payroll Info. > Attendance / Production Types > Create
In the Attendance Type Creation screen,
1. Type Present as the Name of the Attendance type
2. Specify the group as Primary in the field ‘Under’. By default primary is selected.
Types of Units:
Simple Units are individual units with no relationship with other units
i.e., Hrs, Nos, Pieces and so on.
Compound Units are a combination of two simple units, where the two
units have an arithmetical relationship with each other. For example, an
Hour of 60 Minutes.
Name Under Attendance/Production Type Period Type
Present Primary Attendance/ Leave with Pay Days
Absent Primary Leave without Pay Days
Overtime Primary Production Hrs of 60 Mins

15
3. Select Attendance/ Leave with Pay as the Attendance Type and the Period Type appears
as Days, by default.
Figure 2.7 Attendance/ Production Type Creation screen
The completed Attendance Type Creation screen is displayed as shown:
Figure 2.8 Attendance/Production Type Creation Screen
4. Press Enter to Accept the Attendance Type Creation screen.
Similarly, create another Attendance Type as Absent. Enter Leave without Pay in the field
Attendance Type.
ii. Absent Attendance Type
The completed Attendance Type Creation screen is displayed as shown:
Figure 2.9 Attendance/ Production Type Creation screen
Press Enter to Accept the Attendance Type Creation screen.

16
In the same way, create Overtime as the Production Type with Production as the Attendance
Type.
iii. Overtime Production Type
The completed Overtime - Production Type Creation screen is displayed as shown below:
Figure 2.10 Overtime - Production Type Creation screen
Press Enter to Accept the Production Type Creation screen.
Present Attendance Type may be used when the pay value is
measured on the basis of positive attendance units, i.e. number of days
present.
Absent Attendance Type may be used when the pay value is
measured on the basis of negative attendance units, i.e. number of days
absent.
Production Attendance Type may be used when the pay value is
measured on the basis of units produced, for e.g., number of boxes
produced.
User Defined Calendar Type may be used to allow the per day pay
value calculation when the user want to have different number of work-
ing days in each month by considering the Holidays and Sundays etc..
e.g. in January 23 days, in Febraury 24 days, in March 25 days etc.
2.3 Pay Heads
Pay Heads may be broadly considered as Earnings and Deductions from an employee’s point of
view. However, these pay heads would still be Expense and Liability from the employer’s view
point.
Some examples of Earnings Pay Heads are Basic Salary, Dearness Allowance, City Compensa-
tory Allowance, House Rent Allowance, Night Shift Allowance, Uniform Allowance, Sales Com-
mission and so on. Some examples of Deductions pay heads are Employees’ Provident Fund
(EPF), Employees’ State Insurance (ESI), Professional Tax, Income Tax, TDS, Advance (if any).
In Tally.ERP 9, each pay head is to be created as an individual ledger account and grouped under
its respective group i.e., all Earnings pay heads under Indirect Expenses group or Direct
Attendance/Production Types details:

17
Expenses group and all Deductions pay heads under Current Liabilities, Current Assets and
Duties & Taxes group.
The preset Pay Head types in Tally.ERP 9 are:
1. Earnings for Employees
2. Deductions from Employees
3. Employees’ Statutory Deductions
4. Employer’s Statutory Contributions
5. Employer’s Other Charges
6. Bonus
7. Gratuity
8. Loans and Advances
9. Reimbursements to Employees
The pay heads marked with the above pay head types will be available during payroll processing,
and if the Pay Head Type is marked as Not Applicable, it will not be available. The Salary
Payable, PF Payable, ESI Payable ledgers should be created by selecting Not Applicable as the
Pay Head Type.
Create the following pay heads in the books of M/s. Spectrum Software Solutions.
2.3.1 Earning Pay Heads
Create the following Earnings Pay Heads:
i. Basic Pay Head Creation
Go to Gateway of Tally > Payroll Info. > Pay Heads > Create
In the Pay Heads Creation screen,
Pay Head
Name
Pay Head
Type
Under Affect
Net Sal-
ary
Name to
Appear
in Pay
Slip
Use for
Gratuity
Calculation
Type
Calculation
Period/ Pro-
duction Type
Basic Pay Earnings for
Employees
Indirect
Expenses
Yes Basic Yes On Attend-
ance
Months
House
Rent
Allowance
Earnings for
Employees
Indirect
Expenses
Yes HRA No As Com-
puted Value
—
Convey-
ance
Earnings for
Employees
Indirect
Expenses
Yes Convey-
ance
No Flat Rate Months
Overtime
Pay
Earnings for
Employees
Indirect
Expenses
Yes Overtime No On Produc-
tion
Overtime
Variable
Pay
Earnings for
Employees
Indirect
Expenses
Yes Variable
Pay
No As User
Defined
Value
—

18
1. Type Basic Pay as the Name of the Pay Head
2. Select Earnings for Employees in the field Pay Head Type.
The Pay Head Creation screen is displayed as shown:
Figure 2.11 Basic Pay Head Creation – Pay Head Type Selection
3. Specify the group as Indirect Expenses in the field Under and press Enter
4. Set Affect Net Salary to Yes
5. Specify Basic in the field Name to appear in Pay Slip
6. Set Use for Gratuity to Yes
7. Select On Attendance in the field Calculation Type and press Enter
Description of general parameters in Pay Head creation:
Affect Net Salary – If this option is set to Yes, then the Pay Head will appear
in the Salary Slip for calculation of Net salary.
Name to appear in the Pay Slip – If Affect Net Salary is set to Yes, then the
required name for the Pay Head that appears in the Pay Slip should be spec-
ified against this field.
Use for Gratuity – This parameter should be set to Yes, for the Pay Head
components that will be used for the Gratuity calculation (e.g. Basic and DA

19
The Pay Head Creation screen with the List of Calculation is displayed as shown:
Figure 2.12 Basic Pay Head Creation - Calculation Type
As Computed Value – This method is used when the pay value is computed
based on certain predefined factors i.e., slab rates, pay heads and so on.
As User-Defined Value – This method is used when the value of pay is not
fixed and does not depend upon any pay components.
Flat Rate – This method is used when the value of the pay heads is fixed for
the given month. This calculation type is not dependant upon attendance/pro-
duction. For example, conveyance of Rs. 800 per month.
On Attendance — This calculation type depends upon Attendance records
and is used along with rate per unit of attendance. For example, Overtime of
Rs. 25 per hour.
On Production — This method is used when the pay value is measured
based on work done i.e., pieces or numbers produced/manufactured.
8. Select Present in the field Attendance/ Leave with Pay.
Calculation Type refers to the method of computation of pay components. In
Tally.ERP 9, there are basically 5 calculation types.

20
The Pay Head Creation screen with the List of Attendance Types is displayed as shown below:
Figure 2.13 Pay Head Creation screen with List of Attendance Types
9. Select Months in Calculation period field and press Enter
If the user intends to record Negative Attendance viz., Absent (i.e if the pay
value is measured on the basis of negative attendance units), select Not
Applicable in the Attendance/ Leave with Pay field and press Enter & then
select Absent in the Leave without Pay field. In the above example we are
selecting Positive Attendance unit i.e Present.

21
The Pay Head Creation screen with the List of Calculation Periods is displayed as shown:
Figure 2.14 Pay Head Creation - Calculation Period selection
Tally.ERP 9 contains four predefined Calculation periods – Days, Fortnights,
Months and Weeks.

22
10. Select User defined in the Per Day Calculation Basis field
Figure 2.15 Pay Head Creation screen - Calculation Basis Selection
11.Press Enter to Accept
Calculation Basis refers to the periodicity of the given calculation period.
As per Calendar Period refers to the perpetual calendar month, i.e. if
the payroll process is carried out for the month of March, then the attend-
ance records will be entered for 31 days.
User Defined Value refers to the consistent payroll period irrespective of
calendar month, i.e. If an employee’s salary is based on a standard
month of 30 days irrespective of the calendar month, then you can select
User Defined as the Calculation Basis and define the periodicity of the
specified period or month.
For example, an employee’s monthly salary is Rs. 3,000 and the calculation
basis is defined as a month of 30 days. If he takes 3 days leave in January
(which consists of 31 days), then the salary per day is computed as (Rs.
3000/30 days, i.e. 100). The net salary after deducting the leave salary [i.e.
Rs. 300 (3 days x Rs. 100)] amounts to Rs. 2,700.
User Defined Calendar Type will provide flexibility to change the per
day salary for the Employee based on the User Defined Calendar days.
For example, for Basic salary of 3000 if the number of days in a month are
defined as 30 then per days salary will be Rs. 100. In the next month if the
number of days is 25 then per day salary will be Rs. 120.

23
12. Specify the Months of 26 Days and press Enter
Figure 2.16 Pay Head Creation screen - Calculation period
13.Select Normal Rounding as the Rounding Method and press Enter.
Figure 2.17 Pay Head Creation screen – Rounding Method selection

24
14.Specify 1 as the rounding Limit (The Rounding limit allows the value to be in multiples of the
limit specified and is based on the Rounding Method selected)
The completed Basic Pay Head Creation screen is displayed as shown:
Figure 2.18 Completed Basic Pay Head Creation screen
15.Press Enter to Accept the screen.
There are 4 methods of Rounding Off in Tally.ERP 9 which are as follows:
Not Applicable – The decimal points will be taken into consideration,
and the amount will not be rounded off.
Downward Rounding – The decimal points will not be taken in to con-
sideration and the amount will be rounded off to the lower value.
Normal Rounding – The amount will be rounded off to the nearest cur-
rency value.
Upward Rounding – The amount will be rounded off to the higher value.

25
ii. House Rent Allowance Pay Head Creation
In the Pay Head Creation screen,
1. Type House Rent Allowance as the Name of the Pay Head
2. Select Earnings for Employees in the field Pay Head Type
3. Specify the group as Indirect Expenses in the field Under and then press Enter
5. Specify HRA as the Name to appear in Pay Slip
6. Set Use for Gratuity to No
7. Select As Computed Value in the Calculation Type field and press Enter
Figure 2.19 HRA Pay Head Creation screen - Calculation Type selection
8. Select Normal Rounding as the Rounding Method and 1 as the rounding Limit and press
Enter

26
9. In the Computation Info screen, select On Specified Formula in the Compute field
Figure 2.20 Pay Head Creation screen with Compute method
Computation on details:
On Current Deductions Total – This calculation type is used when the value
of a pay head depends upon the total of the deductions pay heads previously
defined.
On Current Earnings Total – This calculation type is used when the value of
a pay head depends upon the total earnings pay heads previously defined.
On Current Sub Total – This calculation type is used when the value of a
pay head depends upon the net totals of earnings and deductions previously
defined.
On Specified Formula – This calculation type is used when the pay head
value is computed on the value of one or more pay heads already defined in
the pay structure. (Tally.ERP 9 allows the addition and subtraction of pay
heads already defined in the pay structure and multiplication and divisions
using attendance types. For example, HRA is computed as 40% of the basic
salary.)

27
10. Press Enter and the Compute subscreen is displayed
11. In the Sub-screen Compute:
Select Basic Pay as the Add Pay Head function and press Enter
Figure 2.21 Compute sub-screen
The pay head drop-down box contains pay heads already created. If any pay head(s) is a
component for the given Pay Head, you may create the required Pay Head by pressing Alt+C
from the above Pay Head field and make the necessary alterations in the required pay head.

28
Select End of List
Figure 2.22 Compute: On Specified Formula sub-screen
Press Enter to Accept the screen
12.Specify 1-4-2008 as the Effective From date (In case of a revision in pay structure, you can
define the revised computation information for the given pay head, by giving the effective from
date)
13.The From Amount column is automatically skipped, assuming it to be zero. Press Enter to
skip the Amount Upto column

29
14. Select Percentage as the Slab Type from the List of Slabs
Figure 2.23 Pay Head Creation screen - Slab Type selection
Slab Type Details:
Percentage – This Slab rate is used when the amount is stated as a propor-
tion of a whole.
Value – This Slab rate is used when the amount is stated as absolute value.

30
15. Specify 40% in the Value Basis field and press Enter
Figure 2.24 Pay Head Creation - Value Basis screen
The completed House Rent Allowance (HRA) Pay Head Creation screen is displayed as
shown.
Figure 2.25 Completed HRA Pay Head Creation screen
16.Press Enter to Accept the screen

31
iii. Conveyance Pay Head Creation
Create the Conveyance Pay Head with Calculation Type as Flat Rate.
The completed Conveyance Pay Head Creation screen is displayed as shown:
Figure 2.26 Conveyance Pay Head Creation

32
iv. Overtime Pay Head Creation
Create the Overtime Pay Head with Calculation Type as Production.
The completed Overtime Pay Head Creation screen is displayed as shown:
Figure 2.27 Overtime Pay Head Creation screen

33
v. Variable Pay Head Creation
Similarly, create the Variable Pay Head with Calculation Type as User Defined Value.
Figure 2.28 Variable Pay Head Creation
2.3.2 Deduction Pay Heads
Create the following Deduction Pay Heads.
Pay Head
Name
Pay Head
Type
Statutory
Pay Type
Under Affect
Net
Salary
Name to
Appear in
Pay Slip
Calcula-
tion Type
Computation
Method
Employees’
PF Contribu-
tion @ 12%
Employees’
Statutory
Deductions
PF
Account
(A/c No.1)
Current
Liabilities
Yes EPF @ 12% As
Computed
Value
On
Specified For-
mula
Employees’
ESI Contri-
bution @
1.75%
Employees’
Statutory
Deductions
Employee
State
Insurance
Current
Liabilities
Yes ESI @
1.75%
On Speci-
fied For-
mula
Basic Pay +
House Rent
Allowance +
Conveyance +
Overtime Pay
(or Current
Earnings -
Variable Pay)
Profes-
sional Tax
Employees’
Statutory
Deductions
Profes-
sional Tax
Current
Liabilities
Yes Profession
Tax
As
Computed
Value
On Current
Earnings Total

34
i. Employee’s PF Contribution @ 12% Pay Head Creation
1. Type Employee’s PF Contribution @ 12% as the Name of the Pay Head
2. Select Employees’ Statutory Deductions in the field Pay Head Type and press Enter
Figure 2.29 Employees' PF Contribution @ 12% Pay Head Creation

35
3. Select PF Account (A/c No. 1) in the Statutory Pay Type field as shown:
Figure 2.30 Employees' PF Contribution @ 12% Statutory Pay Type selection
4. Specify the group as Current Liabilities in the field ‘Under’ and press Enter (In Tally.ERP 9,
only relevant groups appear during selection, to reduce erroneous data inputs)
6. Specify EPF @ 12% in the field Name to appear in Pay Slip
7. As Computed Value appears in the field Calculation Type by default
8. Select Normal Rounding as the Rounding Method. Specify 1 as the rounding Limit and
press Enter
9. Select On Specified Formula as the Compute method and press Enter

36
10. In the Compute sub-screen, select Basic Pay as the Add Pay Head function and press
Enter
Figure 2.31 Deduction Pay Head Creation screen – Compute On selection
11.Press Enter to Accept the screen
12.Specify 1-4-2008 as the Effective From date
13.The column From Amount is automatically skipped, with the assumption that the amount is
zero

37
14.Specify 6500 in the Amount Upto column and press Enter
Figure 2.32 Deduction Pay Head Creation – Computation Info.
15.Select Percentage as the Slab Type from the List of Slabs
16.Specify 12% as the Value Basis Percentage and press Enter (the From Amount is defaulted
as 6500)
17.Press Enter to accept the upper level as 0 and select Value as the Slab Type from the List of
Slabs

38
18.Specify Rs. 780 in the Value Basis field and then press Enter
Figure 2.33 Deduction Pay Head Creation screen with Value Basis
19.Press Enter twice

39
The completed Employee’s PF Contribution @ 12% Pay Head Creation screen is displayed as
shown:
Figure 2.34 Completed Employee’s PF @ 12% Pay Head Creation screen
ii. Employee’s ESI Contribution @ 1.75% Pay Head Creation
Create Employee’s State Insurance (ESI) Pay Head as discussed.
1. Type Employee’s ESI Contribution @ 1.75% as the Name of the Pay Head
2. Select Employees’ Statutory Deductions in the field Pay Head Type
3. Select ESI in the field Statutory Pay Type
4. Specify the group as Current Liabilities in the field Under and press Enter
6. Specify ESI @ 1.75% in the field Name to appear in Pay Slip
7. As Computed Value appears by default in the field Calculation Type
8. Select the option Normal Rounding as the Rounding Method. Specify 1 as the rounding
Limit and press Enter

40
9. Select On Specified Formula in the field Compute and press Enter
Figure 2.35 Employee's ESI Pay Head creation screen - Compute On Selection
In the Compute On Sub-screen, subscreen,
Select House Rent Allowance as the second Pay Head in the Add Pay Head Func-
tion

41
Similarly, select Conveyance and Overtime Pay as the Add Pay Head function
Figure 2.36 Employee's ESI Pay Head creation screen - Add Pay Head selection
Select End of List and press Enter
10.Specify 1-4-2008 as the Effective From date
11.The From Amount and Amount Upto fields are skipped as the amount is already entered in
the Statutory & Taxation screen
12.Select Percentage as the Slab Type from the List of Slabs
13.Specify 1.75% as the Value Basis Percentage and press Enter
Any income of a regular nature will be subject to ESI calculation viz., Basic
Pay, Dearness Allowance, House Rent Allowance, Conveyance, Overtime
etc.,)

42
Figure 2.37 Employee's ESI Pay Head creation screen – Slab Rate

43
The completed ESI – Employee’s Contribution Pay Head Creation screen is displayed as
shown:
Figure 2.38 Completed ESI – Employee’s Contribution Pay Head Creation screen
iii. Professional Tax Pay Head Creation
Create Professional Tax Pay Head with the following Slab rates.
From Amount To Amount Professional Tax
Amount
0 5000 0
5000 8000 60
8000 10000 100
10000 15000 150
15000 - 200

44
The completed Professional Tax Pay Head Creation screen is displayed as shown:
Figure 2.39 Profession Tax Pay Head Creation
2.3.3 Gratuity Pay Head
Apart from the above Pay Heads, create Gratuity Expenses (Provisional) Account in order to get
provisional Gratuity liability report for the employer at any given period.
Gratuity refers to the monetary benefit given by the employer to the employee at the end of the
employment for the services rendered over a period of employment either by law or otherwise. It
is calculated provisionally at the end of each financial period to assess the possible liability of the
company towards its employees. A Gratuity Provisional Account is created to capture the details
required for the calculation of gratuity. Gratuity is calculated based on select salary components.
The formula used for Gratuity calculation is as follows:

45
1. Type Gratuity Expenses (Provisional) as the Name of the Pay Head
2. Select Gratuity in the field Pay Head Type. The Slab Rate details for Gratuity Calculation
screen are displayed.
3. In the Gratuity Calculation subscreen, specify the following details:
Specify Gratuity Days of a Month as 26
Enter 1 and 60 (months) in the From and To fields under the Number of Months col-
umn
Specify 0 in the field Eligibility days for Gratuity Calculation per year
Similarly, select 61 and 120 in the From and To fields
Specify 15 in the Eligibility days for Gratuity Calculation per year field
Press Enter to accept 121 in the field From
Specify 15 in the field Eligibility days for Gratuity Calculation per year
* Eligible salary refers to the sum of pay heads covered in the employee’s
latest pay structure, for the relevant period. The pay heads must be set to Yes
for Use for gratuity and the Gratuity ledger should be part of the pay struc-
ture.
# Served period is computed from the date of joining to the end date of cal-
culation period. Served period may be proportionate such as 11 years 10
months and 5 days.
When Served period covers more than one slab, the total of the calculations
of all the slabs will constitute the gratuity provisional amount of the employee.
Ledger Pay Head Type Under
Gratuity Expenses (Provisional) Gratuity Provisions (Current
Liabilities)

46
The Slab Rate Details for Gratuity calculation screen is displayed as shown:
Figure 2.40 Slab Rate Details for Gratuity Calculation screen
4. Press Enter to Accept the screen
5. Specify the group as Provisions (Current Liabilities) in the field Under and press Enter
Gratuity parameter details:
Gratuity days of a Month – The number of days per calendar month varies
from 28 to 31. In this case, you can apply a consistent period of 26 days
(excluding 4 Sundays) for all employees irrespective of their month of leaving.
It can also be fixed by law.
Number of months From and To – This represents the months until which
the eligible days are applicable in the Slab system, beginning from the date of
joining.
Eligibility days for Gratuity Calculation per year – This refers to the
Number of days’ pay given as gratuity for the entire slab. If the slab period
has not ended, then the slab is applied based on the number of months cov-
ered in the previous slab. If the number of days eligible is zero (0), then the
eligible days mentioned in the next slab are considered.

47
The completed Gratuity Expenses (Provisional) Pay Head Creation screen is displayed as
shown:
Figure 2.41 Gratuity Expenses Ledger Creation screen
6. Press Enter to Accept the screen.
2.4 Salary Details Setup
The Salary Details masters contain information on the Employee Group/ individual employee pay
structure, comprising of both earnings and deductions pay components for the applicable period.
Businesses having a common pay structure for a particular department or division or set of
employees can define salary details for an employee group and classify individual employees
under the specified group to inherit the parent pay values. The Employee Group master prefills
the parent group values to the individual employee masters created under them. It reduces the
possibility of erroneous data entry and expedites data entry. This categorisation also helps in gen-
eration of Group-wise reporting.
Pay structure constituting the Pay Heads and basis of calculation should be similar for the
employees falling under the same group, but pay values need not be the same.
Tally.ERP 9 also allows you to set up individual employee salary details with all parameters appli-
cable for Employee groups. The individual employee masters with separate pay structures are
usually created on a case-to-case basis.

48
To define Salary Details for employees,
Go to Gateway of Tally > Payroll Info. > Salary Details > Create
Figure 2.42 List of Employee Groups/ Employees screen
1. Select Vijay Kumar from the List of Employees and press Enter
In the Salary Details screen,
The Effective date is entered as 01-04-2009 by default based on the Date of Joining
entered in the Employee Master
Select Basic Pay as the Pay Head from the List of Pay Heads
Specify 10,000 as Rate
The Attendance units, Pay Head Type and Calculation Type appear by default, based
on the pay head definitions.

49
The Salary Details Creation screen is displayed as shown:
Figure 2.43 Salary Details Creation screen
2. Select House Rent Allowance as the second Pay Head and press Enter
3. Select Conveyance as the next Pay Head
4. Specify 800 as Rate and press Enter
5. Select Overtime Pay as the Pay Head
6. Specify 55 as the Rate and press Enter
7. Select Variable Pay as the Pay Head and press Enter
8. Select Professional Tax against the Pay Head and press Enter
9. Select Employee’s PF Contribution @ 12%, Employee’s ESI Contribution @ 1.75% as Pay
Head and press Enter
10.Select the Gratuity Expenses (Provisional) ledger and press Enter (In case of Employees
eligible for Gratuity, the Gratuity Expenses ledger should be included in the Salary details of
the respective Employee for provisional assessment of Gratuity)

50
The completed Salary Details Creation screen for Mr. Vijay Kumar is displayed as shown:
Figure 2.44 Completed Salary Details screen
Tally.ERP 9 allows you to modify the pre-defined Slab rates by pressing F12:
Configure and setting the option Allow to Override Slab Percentage to
Yes.
In case a revision in pay structure is required for any subsequent period,
define the latest pay structure by specifying the relevant Effective from date.

51
Similarly, create the pay structure for the other employees as per the details given in the following
table:
Salary Details for Ajay can be created similar to the Salary Details creation for Vijay Kumar.
Since Ajay and Mahesh are in Sales Group, we can create the Salary Details for the Group and
inherit the same for the Employees (Ajay and Mahesh) in that Group.
Salary Details creation for the Sales Group
1. From the List of Group / Employees select Sales
2. Select the Pay Heads from the List of Pay Heads which are applicable to this group.
3. Leave the Rate field empty if there is no standard rate.
Pay Head Rahul Mahesh Ajay
Basic Pay 20,000 45,000 10,000
House Rent Allowance 40% 40% 20%
Conveyance — 1,000 2,000
Overtime Pay — — 100
Variable Pay User — defined
Gratuity Expenses (Provisional) Only for reporting purpose
Employee’s PF Contribution @ 12% Applicable as Slab Rates
Employee’s ESI Contribution @ 1.75% Applicable as Slab Rates
Professional Tax Applicable as Slab Rates

52
The completed Salary structure for the Sales Group is as shown:
Figure 2.45 Completed Salary Details for Sales Group
The Pay structure created above can be inherited for all the employees belonging to Sales Group.
This feature helps in eliminating the repetitions while creating the Salary Details.
To define the Salary Details for Mr. Ajay belonging to Sales Group, follow the steps given below:
1. From the List of Group / Employees select Ajay and press Enter
2. Select Copy From parent Value from the Start Type options under Pay Head

53
The Salary Details Creation screen is displayed as shown:
Figure 2.46 Salary details Creation – Copy From Parent Value
3. The Pay Structure (comprising of Earning & Deductions pay heads) defined for the Group is
prefilled automatically.
4. Enter the values for each Pay Head for Ajay as per the details mentioned earlier.
5. Press F12: Configure
Set the option Allow to Override Slab Percentage to Yes, since the HRA calculation
percentage is 20%.
Start Type Details:
Copy From Parent Value will copy the pay structure from the Group to
which the Employee belongs. This will help you to save time in creating the
Salary Details for large number of Employees.
Start Afresh will allow the user to start selecting the Pay Head from the List
of pay Heads already created.

54
The Salary Details Configuration screen is displayed as shown:
Figure 2.47 Salary Details Configuration
6. Now, you will be able to enter the user-defined pay rates to compute the HRA, specify 20% and
press Enter
In the Salary Details Configuration screen, when the option Allow to
Override Slab Percentage is set to Yes, the predefined slab rates for the
Pay Heads can be modified as per user requirements.

55
The completed Salary Details screen of Mr. Ajay is displayed as shown:
Figure 2.48 Completed Salary Details screen
7. Press Enter to Accept the screen.
Similarly, you can create the Salary Details for Mahesh and others employees.

56
Lesson 3: Processing Payroll in Tally.ERP 9
Lesson Objectives
Typically, Payroll Processing comprises of the following activities:
Recording of Attendance and Production details (on time / work)
Processing Payroll Vouchers
Payment of Salaries
There are three types of Payroll Vouchers namely Attendance Voucher, Payroll Voucher and
Payment Voucher, which are by default preset in Tally.ERP 9 to record above Payroll transac-
tions.
Payroll Vouchers are used for the purposes of operating your payroll and also records the attend-
ance of the employees for a given period. These vouchers are basically used to input information
pertaining to Payroll processing.
.
3.1 Attendance Vouchers
An Attendance Voucher is used to record employees’ attendance data, based on Attendance/
Production types (i.e., present or absent days, overtime hours and so on).
An Attendance Voucher allows you to record the attendance/ production units for employees.
Tally.ERP 9 gives you the flexibility to enter the attendance records through a single attendance
voucher for a payroll period, or through multiple attendance vouchers as and when required within
a payroll period. You also have the option of recording one attendance/ production voucher per
employee per day or collectively for a month or any other variation thereof for all the employees.
In Tally.ERP 9, the auto-fill facility (Alt+A) is used to prefill the required Attendance/Production
types data for the selected employee group/ employee for the specified period.
On completion of this lesson, you will have learnt
To process Payroll in Tally.ERP 9

Processing Payroll in Tally.ERP 9
57
Example 1:
On 30th April, 2009 the attendance records of M/s. Spectrum Solutions displayed the
following details:
Attendance/ Produc-
tion Types
Vijay Kumar Rahul Mahesh Ajay
Present Days 26 22 15 17
Overtime hours 900 Min
(15hr x 60min)
720 Min
(12hr x 60min)
In the above scenario, separate attendance vouchers are required to be entered for recording
Present days and Overtime hours.
Go to Gateway of Tally > Payroll Vouchers
1. Press Ctrl+F5 for Attendance Voucher
The Attendance Voucher Creation screen is displayed as shown:
Figure 3.1 Attendance Voucher Creation screen
2. Press F2 and specify the date as 30-4-2009
3. Press Enter
4. Press Alt+A (Attendance Auto Fill) to prefill employee payroll details

58
The Attendance Auto Fill screen is displayed as shown:
Figure 3.2 Attendance Auto Fill screen
In the Attendance Auto Fill screen,
Specify the Voucher Date as 30-04-2009 if not specified earlier
Select Primary Cost Category as Employee Category (If separate cost categories
are used to capture employee cost, then select the respective Employee category)
Figure 3.3 Attendance Auto Fill - Employee Category selection
Select All Items as Employee/ Group (if you want to generate payroll voucher for indi-
vidual employee/ group, select the respective employee or group)

59
The Attendance Auto Fill with Employee Filters screen is displayed as shown:
Figure 3.4 Attendance Auto Fill with Employee List
Select Present as Attendance Type in the Attendance/ Production Type field
Figure 3.5 Attendance Auto Fill with List of Attendance Type
Specify the require value that should be prefilled for all Employees e.g. 26
Press Enter to accept the screen

60
5. Employees pertaining to the respective Employee Groups are displayed automatically
Figure 3.6 Attendance Voucher
6. Alter the attendance details as given in the table above
Separate Attendance vouchers are required for recording attendance on
Work and Production.
If you opt for Absent as Attendance Type, then you need to record the
negative attendance of the employees. This minimises data entry time and
manages the data entry by exception.

61
The Attendance Voucher Creation screen with the attendance details screen is displayed as
shown:
Figure 3.7 Attendance Voucher
7. Press Enter
8. Enter the details of the transaction in the Narration field

62
The completed Attendance Voucher Creation for Present Attendance is displayed as shown:
Figure 3.8 Completed Attendance Voucher Screen
9. Press Enter to accept the completed Attendance Voucher screen.
In the same way, create an Attendance Voucher for Overtime Hours.
Days with Loss of Pay (LOP) are treated as a Deductible with respect to the
Earnings Pay Head type and as a Payable with respect to the Deductions
Pay Head type. For example, LOP is deducted from the Basic salary
(Earnings Pay Head) and Canteen expenses (Deductions Pay Head) are
treated as a payable.

63
The completed Attendance Voucher for Overtime Hours is displayed as shown:
Figure 3.9 Attendance Voucher Screen - Overtime
Press Enter to accept.
After creating the Attendance Voucher, you can change any attendance value for a particular
employee, if required, in the Voucher Alteration mode.
You can also record Overtime in hours, provided the Unit of Measurement for
the Payroll unit is defined as Hrs.

64
3.2 Payroll Vouchers
A payroll voucher is used to record all employee-related transactions. It enables you to compute
all the values for the respective Pay Heads (Earnings and Deductions).
The calculations are made on the basis of the definitions specified in the pay head masters, pay
structure and attendance entries. In Tally.ERP 9, you can pass payroll vouchers manually for indi-
vidual employee as well as for the entire group/ organisation by using the Auto Fill facility (Alt+A).
In Tally.ERP 9, the disbursement of salaries can be effected in any of the following modes.
Direct Remittance – in cash or by cheque
Bank Transfer – a direct transfer is made to an employee’s bank account and the list of
disbursement is printed separately
3.2.1 Cash Remittance
Example 2:
On 30th April, 2009, M/s. Spectrum Solutions processes Payroll for all the employees and
entitled the following employees for Variable Pay.
1. Press Ctrl+F4 for Payroll Voucher
2. Press F2, specify the date as 30-4-2009 and press Enter
3. Press Alt+A (Payroll Auto Fill) to prefill employee payroll details
In the Payroll Auto Fill screen,
Select Salary in the Process for field
Figure 3.10 Payroll Autofill with Process List
Particulars Vijay Kumar Rahul Mahesh Ajay
Variable Pay 1500 - 1000 -

65
Specify 1-4-2009 in the From field
Specify 30-4-2009 in the To field
Select All Items as Employee/Group
Figure 3.11 Payroll Autofill with List of Employees
Select Cash in the Payroll Ledger field
In Tally.ERP 9, the following processes are preset for faster processing of
Payroll:
Salary: This process is used for processing salaries for a specified
period, wherein Salaries are disbursed through Cash or a bank transfer.
ESI Contribution: This process is used for processing Employer’s
contributions towards ESI for a specified period.
PF Contribution: This process is used for processing Employer’s Provi-
dent Fund (PF) contributions for a specified period.

66
The completed Payroll Auto Fill screen is displayed as shown:
Figure 3.12 Payroll Autofill with payment Ledger list
Press Enter to accept the screen (the Cash ledger is prefilled in the Account field)
All the pay values are calculated for the applicable pay heads for each employee grouped under
the selected group.

67
The Payroll Voucher Creation screen is displayed as shown:
Figure 3.13 Payroll Voucher Creation
4. Press Enter and specify the pay values for the pay heads defined as user-definable values
against each employee (in this case, define the Variable Pay)

68
Specify 1000 as Variable Pay for Mahesh
Figure 3.14 Payroll Voucher - adding Variable pay
Similarly, specify 1500 as Variable Pay for Vijay Kumar and press Enter

69
The completed Payroll Voucher Creation screen is displayed as shown:
Figure 3.15 Completed Payroll Voucher
5. Press Enter to accept
Press Alt+S to pass the above voucher in the Voucher mode. This can be
used to keep track of Bill References. e.g. if there are more than one Salary
Advances, then the to track the recovered Amount from Employee’s salary
against the respective Advance given, this feature should be used.
.
3.2.2 Bank Transfer
Bank transfer refers to disbursement of Salaries directly into the Employee Bank Accounts by inti-
mating the Bank through a Payment advice. Tally.ERP 9 facilitates processing salaries through
Bank transfer with the help of predefined Salary process.
Example 3:
On 31st May, 2009 M/s. Spectrum Solutions disbursed Salaries payable for the month of
May 2009 through Bank Transfer. The attendance records displayed the following details:

70
On 31st May 2009, M/s. Spectrum Solutions processes Payroll for all the employees and
entitled the following employees for Variable Pay.
Particulars Vijay Kumar Rahul Mahesh Ajay
Variable Pay 500 - 1200
Step 1: Create Attendance Voucher
Create Attendance Vouchers for Present days and Overtime hours for May 2009 as per the
details given in the above table.
The completed Attendance Voucher for Present days is displayed as shown:
Figure 3.16 Attendance Voucher for Present days
Press Enter to accept
Attendance/Production
Types
Vijay Kumar Rahul Mahesh Ajay
Present Days 25 20 26 21
Overtime Hours - 120 Min
(2hr x 60min)

71
In the same way, create an Attendance Voucher for Overtime Hours.
The completed Attendance Voucher for Overtime Hours is displayed as shown:
Figure 3.17 Attendance Voucher for Overtime Hours
Step 2: Create Salary Payable Ledger
Before passing the Salary payment voucher, create the following ledger:
Salary Payable Not Applicable Current Liabilities

72
The completed Salary Payable Ledger creation screen is displayed as shown:
Figure 3.18 Salary Payable Ledger Creation
Step 3: Create Payroll Voucher
4. In the Payroll Auto Fill screen,
Select Salary in the Process for field as shown
Figure 3.19 Payroll Autofill with List of Processes
5. Specify 01-05-2009 in the From field
6. Specify 31-05-2009 in the To field

73
7. Select All Items as Employee/Group
8. Select Salary Payable in the Payroll Ledger field as shown
Figure 3.20 Payroll Autofill - Payroll Ledger selection
9. Press Enter (All the pay values are calculated for the applicable pay heads for each employee
grouped under the selected group).
10. Press Enter and specify the pay values for the pay heads defined as user-definable values
against each employee
Specify 1200 as Variable Pay for Ajay
Specify 500 as Variable Pay for Vijay Kumar
The completed Payroll Voucher for the month of May 2009 is displayed as shown:

74
After passing the above entry, the salaries payable for the month of May 2009 are transferred to
the Salary Payable Ledger, at the time of payment of salaries, the amount is reversed.
3.2.3 Payment of Salaries (Salary Disbursement)
In Tally.ERP 9, a Payment voucher can be used to effect salary disbursement to employees. The
payment voucher for the salaries payable may be passed through regular payment voucher or
automated using the preset Salary Payment process available in Tally.ERP 9 for error free data
input during Payroll Payment entry with the help of Auto Fill facility.
Example 4:
On 31st May 2009, M/s. Spectrum Solutions paid the salaries due for the month of May
2009.
Before passing the payment voucher, necessary Bank Accounts should be created. To make the
Salary payment, follow the steps given below:
Go to Gateway of Tally > Accounting Vouchers
1. Press F5 for Payment Voucher
In the Payment Auto Fill screen,
Select Salary Payment in the Process for field as shown.
Figure 3.22 Payment Auto Fill - Payment Process Selection
Specify 01-05-2009 as From period
Specify 31-05-2009 as To period
Specify Voucher Date as 31-05-2009
Select Primary Cost Category in the Employee Category field
Select All Items in the Employee/Group field
Select HDFC Bank in the Bank / Cash Ledger field as shown.
Select Salary Payable in the Payroll Ledger field

75
The completed Payment Auto Fill screen is displayed as shown:
Figure 3.23 Payment Auto Fill screen
4. Press Enter and the employee payroll details will appear by default.
5. Enter the details of the transactions in the Narration field
The completed Payroll Payment Entry screen is displayed as shown:
Figure 3.24 Payment Voucher
6. Press Enter to accept.
If a partial payment of salaries is made to a particular group of employees, then generate a
separate payroll voucher for their payables and pass a separate payment entry based on the set-
tlement. However, Tally.ERP 9 also allows you to modify the payment amount to the Employees.

76
The unpaid salary will remain as outstanding in the Salary payable account and can be auto-filled
in the payment voucher as and when the actual payments are made.
If any cash disbursements are made prior to the payment voucher entry,
after using the Auto-Fill facility, select the unpaid salaries and enter zero
(0) in the amount payable.
If salaries are disbursed by cheque, select individual employee in the
Auto Fill Employee Filter and print the cheque for the payment voucher.
You have to create separate payroll payment entries for each employee.

77
Lesson 4: Accounting for Employer PF
Contributions
Lesson Objectives
The Employees' Provident Funds and Miscellaneous Provisions Act is a social security legislation
which administers provident fund, family pension and insurance to employees. The Act covers
three schemes, namely; PF (Provident Fund scheme), EPS (Employees’ Pension Fund Scheme),
EDLI (Employees Deposit Linked Insurance scheme).
Under the Employees’ Provident Fund scheme, both the employees and employer contribute to
the fund at the rate of 12% of the basic wages, dearness allowance, cash value of food conces-
sion and retaining allowance (if any), payable to employees per month. The contribution rate is
10% in the case of the following establishments:
Any covered establishment with less than 20 employees
Any sick industrial company as specified in the relevant section of Sick Industrial Compa-
nies (Special Provisions) Act, 1985 and which has been declared as such by the Board for
Industrial and Financial Reconstruction
Any establishment which has at the end of any financial year accumulated losses equal to
or exceeding its entire net worth and
Any establishment engaged in manufacturing of (a) jute (b) Breed (d) coir and (e) Guar
gum Industries/ Factories.
The Contribution payable by the Employer is not to be deducted from the wages of the employee.
However, the employer has to deduct employee's share from their Salaries and pay the same in
EPF scheme. The deduction can be made only from the wages pertaining to a period for which
contribution is paid. However, if there is an accidental omission, the amount can be recovered
later.
On completion of this lesson, you will be able to
Process Employer’s Contributions to Provident Fund (PF)
Payment of Provident Fund Contributions
Generate the PF Combined Challan

Accounting for Employer PF Contributions
78
Out of the employer's contribution of 12% or 10%, the Employer's contribution of 8.33% is
diverted to Employees' Pension Scheme and the balance is retained in the EPF scheme. On
retirement, the employee gets his full share plus the balance of Employer's share retained to his
credit in the EPF account.
Once an establishment is covered under PF, all its departments and branches are covered, irre-
spective of where they are located.
i. Employees' Pension Scheme:
As discussed above, the employer's contribution of 8.33% is diverted to the fund of the Pension
Scheme and the balance 3.67% (1.67%, if the contribution is 10%) is credited in employee's
name in Provident Fund account. The contribution of 8.33% is on maximum salary of Rs. 6,500.
However, if some employers are paying contribution on salary in excess of Rs. 6,500, the excess
contribution will be credited to Provident Fund account and not to Pension scheme.
Benefits under the Scheme
Members will get pension on superannuation or retirement from service and upon disablement
during employment. Family pension will be available to the widow/widower for life or till he/she
remarries. In addition, children will be entitled to pension, upto 25 years of their age. In case of
orphans, pension at enhanced rate is available upon death of widow/widower or ceasing payment
of widow pension. Benefit of pension to children or orphan is restricted to two children/orphans. If
the person is unmarried or has no family, pension is available to the nominee for a specified
period.
ii. Employees Deposit Linked Insurance Scheme:
The purpose of the scheme is to provide life insurance benefits to employees who are already
covered under PF/EPS. The employer has to pay a contribution equal to 0.50% of the total wages
of the employee. Additionally, administrative charges of 0.01% of total wages have also to be paid
by the employer. The employee does not have to contribute any amount to this scheme. The
salary limit for coverage of employees is the same as that of the Provident Fund.
Benefit to nominee of employee
In case of death of an employee during employment, his nominee or family member gets an
amount equal to average balance in the Provident Fund Account of the deceased employee
during the last 12 months.
As discussed earlier, the statutory features viz., EPF & ESI etc., are required to be configured in
F11: Statutory & Taxation Features. In this section, we will discuss, recording of transactions
related to computation and contribution of Provident Fund.

79
Illustration 1:
On 30th April, 2009 M/s. Spectrum Software Solutions processed Provident Fund contribu-
tions for the month of April 2009 and paid the amount in full to EPFO.
The same is accounted as shown:
In Tally.ERP 9, follow the steps given below to process Employer contribution towards Provident
Fund:
Create Employer PF Contribution Masters
Alter/Modify Salary Details
Processing Employer PF Contribution
Processing PF Admin Expenses
Payment of Provident Fund
4.1 Creation of Employer PF Contribution Masters
In Tally.ERP 9, Employer contribution towards Employees’ Pension Fund (Employees’ Pension
Scheme), Provident Fund, Admin Charges and other PF related ledgers are required to be
created separately for appropriate Accounting and reporting. Create the following ledgers in
Tally.ERP 9,
1. Employer Contributions Pay Head
2. Employer PF Admin Charges
3. PF Payable Ledger
4. Creation of PF Admin Expenses Ledger
I. Employer Contributions Pay Head
i. Employer Contribution EPS @ 8.33% Pay Head Creation
Go to Gateway of Tally > Payroll Info. > PayHeads > Create
1. Type Employer EPS @ 8.33% as the Name of the Pay Head
2. Select Employer’s Statutory Contributions in the field Pay Head Type
Pay Head
Name
Pay Head Type Statutory Pay
Type
Under Affect
Net
Salary
Calculation
Type
Employer EPS
@ 8.33%
Employer’s Statu-
tory Contributions
EPS Account
(A/c No.10)
Indirect
Expenses
No As computed
value
Employer EPF
@ 3.67%
Employer’s Statu-
tory Contributions
PF Account (A/
c No.1)
Indirect
Expenses
No As computed
value

80
3. In the field Statutory Pay Type, select EPS Account (A/c No. 10) as shown
Figure 4.1 Employer EPS @ 8.33% Pay Head Creation
4. Specify the Group as Indirect Expenses in the Under field and press Enter
5. Set Affect Net Salary to No
6. By default the Calculation Type is set to As Computed Value and Calculation Period as
Months
Enter
In the Computation Info section,
Select On Specified Formula in the Compute field
Press Enter, the Compute subscreen appears
In the Compute Sub screen,

81
Select Basic Pay as the Add Pay Head function from the list of Pay Heads as shown.
Figure 4.2 Compute Subscreen
Select End of List
Specify 1-4-2009 as the Effective From date
Specify 6500 in the Amount Upto column
Select Percentage as the Slab Type from the List of Slabs and specify 8.33% in the
Value Basis field and press Enter
The From Amount is prefilled as 6500, press Enter to skip the Amount Upto field
Select Value as the Slab Type from the List of Slabs
Specify 541 in the Value Basis field and press Enter

82
The completed Employer EPS @ 8.33% Pay Head Creation screen is displayed as shown:
Figure 4.3 Completed Employer EPS Pay Head Creation Screen
ii. Employer Contribution EPF @ 3.67% Pay Head
Go to Gateway of Tally > Payroll Info > PayHeads > Create
1. Type Employer EPF @ 3.67% as the Name of the Pay Head
3. In Statutory Pay Type filed select PF Account (A/c No. 1)

83
Figure 4.4 Employer EPF @ 3.67% Pay Head Creation
4. Specify the group as Indirect Expenses in the Under field and press Enter
6. The Calculation Type is defaulted automatically as As Computed Value and Calculation
Period as Months
Enter
8. In the Computation Info section,
Select On Specified Formula in the Compute field
Press Enter and the Compute On subscreen displays
In the Compute sub-screen,
Select Employee’s PF Contribution @ 12% from the List of Pay Heads as the Add
Pay Head function and press Enter
Select Subtract Pay Head in Function and under Pay Head select Employer EPS @
8.33% from the List of Pay Heads.

84
The Compute sub-screen is displayed as shown:
Figure 4.5 Compute Subscreen
Select End of List
Press Enter to skip the Slab fields
Select Percentage as the Slab Type from the List of Slabs
Specify 100% in the Value Basis field and press Enter

85
The completed Employer EPF @ 3.67% Pay Head Creation screen is displayed as shown:
Figure 4.6 Completed Employer EPF Pay Head Creation Screen
II. Employer PF Admin Charges
Alternatively, you can also define the criteria for computation of Employer PF
Contribution @ 3.67% Pay head, by selecting Basic Pay in the Compute sub-
screen. and defining the percentage as 3.67%.
Pay Head
Name
Pay Head
Type
Statutory Pay
Type
Under Affect Net
Salary
Calculation
Type
PF Admin
Charges @ 1.10%
Employer’s Other
Charges
Admin Charges
(A/c No.2)
Current Lia-
bilities
No As computed
value
EDLI Contribution
@ 0.5%
Employer’s Other
Charges
EDLI Contribution
(A/c No.21)
Current Lia-
bilities
No As computed
value
EDLI Admin
Charges @ 0.01%
Employer’s Other
Charges
EDLI Admin
Charges (A/c
No.22)
Current Lia-
bilities
No As computed
value

86
i. PF Administrative Charges @ 1.10% Pay Head Creation
1. Type PF Admin Charges @ 1.10% as the Name of the Pay Head
2. Select Employer’s Other Charges in the field Pay Head Type
3. In Statutory Pay Type field, select Admin Charges (A/c No. 2) as shown
Figure 4.7 PF Admin Charges Pay Head creation
4. Specify the group as Current Liabilities in the Under field and press Enter
6. The Calculation Type is defaulted automatically as As Computed Value and Calculation
Period as Months
7. The Rounding Method is defaulted to Normal Rounding and 1 defaulted as the rounding
Limit
8. In the Computation Info section,
On PF Gross is selected automatically in the Compute field
Specify 6500 in the Amount Upto column
Select Percentage as the Slab Type and specify 1.10% in the Value Basis field and press
Enter

87
The completed PF Admin Charges @ 1.10% Pay Head Creation screen is displayed as shown:
Figure 4.8 Completed Pay Head Creation - PF Admin Charges
ii. EDLI Contribution @ 0.5% Pay Head Creation
In the Pay Heads Creation screen:
1. Type EDLI Contribution @ 0.5% as the Name of the Pay Head
2. Select Employer’s Other Charges in the field Pay Head Type.

88
3. In Statutory Pay Type filed select EDLI Contribution (A/c No. 21) as shown
Figure 4.9 EDLI Contribution Pay Head Creation
6. In the Computation Info screen,
In the Compute field, On PF Gross is selected by default.
Specify 1-4-2009 as the Effective From date (In case of a revision in pay structure, you
can define the revised computation information for the given pay head, by giving the effec-
tive from date)
The From Amount column is automatically skipped, assuming it to be zero. Enter 6500 in
the Amount Upto column.
Specify 0.5% in the Value Basis field and press Enter

89
The completed EDLI Contribution @ 0.5% Pay Head Creation screen is displayed as shown:
Figure 4.10 Completed Pay Head for EDLI Contribution
7. Press Enter to accept and save the Pay Head
iii. EDLI Administrative Charges @ 0.01% Pay Head Creation
1. Type EDLI Admin Charges @ 0.01% as the Name of the Pay Head
2. Select Employer’s Other Charges in the field Pay Head Type
3. In Stautory Pay Type filed select EDLI Admin Charges (A/c No. 22)

90
Figure 4.11 EDLI Admin Charges Pay Head Creation
Set Minimum Rs 2/Employee to Yes if you want the EDLI Admin Charges to be mini-
mum Rs. 2.
On PF Gross is selected in the Compute field, by default
The From Amount column is automatically skipped, assuming it to be zero. Enter 6500 in
the Amount Upto column
Specify 0.01% in the Value Basis field and press Enter
When the option Minimum Rs 2/Employee is set to Yes, the EDLI Admin
Charges for each employee is minimum Rs. 2 or actual value as calculated.
When this option is set to No the EDLI Admin Charges are calculated as per
the specified formula.

91
The completed EDLI Admin Charges @ 0.01% Pay Head Creation screen is displayed as
shown:
Figure 4.12 Completed pay Head for EDLI Admin Charges
7. Press Enter to accept and save the Pay Head.
III. PF Payable Ledger
To process the Employer PF Contribution, create PF Payable Ledger as explained below:
Go to Gateway of Tally > Payroll Info. > Payheads > Create
1. Type PF Payable in the Name field
2. In the Pay Head Type field select Not Applicable
3. Specify the Group as Current Liabilities in the Under field and press Enter
PF Payable Not Applicable Current Liabilities

92
The completed PF Payable Ledger creation screen is displayed as shown:
Figure 4.13 Completed PF Payable Ledger Creation
IV. PF Admin Expenses Ledger
To process the Employer Other Charges (PF Admin, EDLI Contribution and EDLI Admin
expenses), create PF Admin Expenses Ledger as explained below:
Go to Gateway of Tally > Accounts Info. > Ledgers > Create
1. In the Name field, type PF Admin Expenses
2. Specify the group as Indirect Expenses in the field Under and press Enter
Ledger Under
PF Admin Expenses Indirect Expenses

93
The completed PF Admin Expenses Ledger creation screen is displayed as shown:
Figure 4.14 PF Admin Expenses Ledger Creation
4.2 Salary Details setup
Once the required Employer Contribution Pay Heads and Admin Expenses ledgers are created,
the salary details of the Employee should be altered to constitute the Employer Contribution pay
head ledgers for automatic calculations based on the monthly payments made to the Employees.
Create / Alter Salary Details Master
To update the salary details Master of the Employees, follow the steps given below:
Go to Gateway of Tally > Payroll Info. > Salary Details > Alter
1. Select the Vijay Kumar one by from the List of Groups / Employees
2. Add the Pay Heads Employer EPS @ 8.33% and Employer EPF @ 3.67%

94
The completed Salary Details screen is displayed as shown:
Figure 4.15 Salary Details Alteration Screen
Similarly, include Employee Contribution Pay Heads in the Salary Details Masters of other
employees.
It is necessary to include Employer Contribution Pay Heads (i.e.,
Employer PF and Employer Pension Fund Pay Heads in the Salary
Structure of the Employee, to automate the Computation of Employer
PF Contribution on the basis of payments made to Employees.
While, including the Employer Contribution Pay Heads in the Salary
Details master, the order of precedence in which the Pay Heads are
included must on the basis of their calculation criteria i.e.,
i. Earning Pay Heads
ii. Deduction Pay Heads
iii. Professional Tax or Income Tax Pay Heads (if any)
iv. Employee PF Contribution Pay Heads
v. Employer PF Contribution Pay Heads
vi. Gratuity (Gratuity is calculated on Basic Pay + DA, hence Gratuity Pay
Head can be sequenced in the Salary details of an Employer in any
order after Earnings Pay Heads).

95
4.3 Processing Employer PF Contribution
In Tally.ERP 9, you are required to process Employer PF Contributions, PF Admin Charges sepa-
rately and make the payment towards PF comprising of Employees’ PF Contribution, Employer
PF Admin Expenses through a combined challan.
Follow the steps explained below to process Provident Fund.
3. Press Alt+A (Payroll Auto Fill) to automate the employee payroll details
4. In the Payroll Auto Fill subscreen,
Select PF Contribution from the Process List drop down as shown
Figure 4.16 Payroll Auto Fill - Process List Selection
Specify 1-4-2009 and 30-4-2009 in the From and To Date fields respectively
Select All Items as Employee/ Group field (To process, for a particular group /
Employee select the respective Employee / group, as required)
Tally.ERP 9 provides the following predefined processes that will help in process-
ing Payroll transactions:
i. ESI Contribution: This process is selected to automate computation
of Employer ESI Contribution.
ii. PF Contribution: This process is selected to automate computation
of Employer PF Contribution
iii. Salary: This process is selected to automate computation of Salaries
payable to Employees.

96
Select PF Payable Ledger from the list of Ledger Accounts drop down in the Payroll
Ledger field as shown
Figure 4.17 Employee Filters screen – Payroll Ledger Selection
The values for the Employer PF contributions are prefilled in the Payroll Voucher for PF Contribu-
tion process.

97
The Payroll Voucher for Employer PF Contribution is displayed as shown:
Figure 4.18 Payroll Voucher Creation - PF Contribution

98
The completed Payroll Voucher for Employer PF Contribution is displayed as shown:
Figure 4.19 Completed PF Contribution screen
4.4 Processing PF Admin Expenses
To process the PF Admin Charges, follow the steps given below:
1. Press F7 for Journal Voucher
3. Press Alt+A (Payroll Auto Fill) to prefill Employer’s Other Charges details
Select All Items in the Employee/ Group field

99
Select PF Admin Expenses Ledger in the Expense Ledger field
Figure 4.20 Employer’s Other Charges screen – Expenses Ledger Selection

100
Select PF Admin Charges @ 1.10% Ledger in the Admin Charges (A/c No. 2) field
as shown
Figure 4.21 Employer’s Other Charges screen – Admin Charges Ledger Selection
Similarly, select EDLI Contribution @ 0.5% and EDLI Admin Charges @ 0.01% in
the EDLI Contribution (A/c No. 21) and EDLI Admin Charges (A/c No. 22) fields
respectively.

101
The completed Employer’s Other Charges subscreen is displayed as shown:
Figure 4.22 Completed Employer’s Other Charges screen
Press Enter
4. Type the details of the transaction in the Narration field

102
The completed Employer PF Expenses Voucher is displayed as shown:
Figure 4.23 Completed PF Expenses Voucher screen
5. Press Enter to accept and save.
4.5 Payment of Provident Fund
In Tally.ERP 9, once the process for Employee and Employer contributions to Provident Fund is
implemented in the manner as discussed in earlier sections, the total amount payable to EPFO is
accumulated separately in three Ledger Accounts, PF Payable Account (Employer Contributions),
Employee PF Contributions and the PF Admin Charges Ledger. At the time of making the
payment to EPFO, a payment voucher is required to be passed.
To process the payment of Provident Fund, follow the steps given below:
Step 1: Create PF Payment Voucher
2. Press F2, specify 30-04-2009 as the Voucher Date and press Enter
3. Press Alt+A (Payment Auto Fill) to prefill PF details

103
Select PF Challan in the Process for field from the Process List screen
Figure 4.24 Employee Filters screen - Process Selection
Enter 1-4-2009 and 30-4-2009 in the From and To Date fields respectively
Specify 30-4-2009 in the Voucher Date field (This field is prefilled, if the voucher date is
specified during Voucher Entry)
Select HDFC Bank in the Bank / Cash Ledger field
Select PF Payable Ledger in the Payroll Ledger field
Figure 4.25 Employee Filters screen - PF Ledger selection
4. Press Enter to prefill PF Payable Amount in respect of Employer Contributions during the
relevant month

104
The Payment voucher is displayed as shown:
Figure 4.26 PF Payment Voucher with Employer PF Contribution details

105
5. Press Enter again, to prefill the amount of Employee Contributions during the relevant
month
Figure 4.27 PF Payment Voucher - with Employee Contribution details

106
6. Press Enter thrice again, to prefill EDLI Admin Expenses, EDLI Contribution and PF Admin
Charges during the selected month as shown:
Figure 4.28 PF Payment Voucher with Employer Other charges details
7. Press Enter twice
8. Set Yes in Provide Details field and press Enter
9. In the Provide Details subscreen,
Specify 245547 in the Cheque/ DD No. field
Specify 30-4-2009 in the Cheque/DD Date field
Specify 30-4-2009 in the Challan Date field
Type the name of the Depositor in the Depositor Name field
Specify the name of the Bank on which the Cheque is drawn in the Bank Name field
The completed Provide Details subscreen is displayed as shown:
Figure 4.29 Payment details subscreen

107
10.Press Enter to go back to the PF Payment Voucher screen
11.Type the details of the transaction in the narration field
The completed PF Payment Voucher screen for the month of April 2009, is displayed as shown:
Figure 4.30 Completed PF Payment Voucher screen
12.Press Enter to accept
Step 2: Print PF Payment Challan
Press Pg UP from the Voucher Entry screen shown above
Press Alt + P, the Voucher Printing screen is displayed as shown:
Figure 4.31 Voucher Printing Screen

108
In the Voucher printing screen, select Yes in the Print Challan field
Press Enter to Print
The printed PF Combined Challan for the month of April 2009 of M/s. Spectrum Software
Solutions is displayed as shown:
Figure 4.32 Printed PF Payment Challan

109
Lesson 5: Accounting for Employer ESI
Contributions
ESI Contribution refers to the amount payable to the Corporation by the Principal Employer in
respect of Employees and comprises of the amount payable by the employee as well as the
employer.
The employer is required to calculate and remit ESI Contributions comprising of employers' share
and employees' share on or before the 21st of the subsequent month in respect of salaries of the
related month. The Principal Employer should pay the Employer’s share of contribution @ 4.75%
in respect of every employee whether employed directly or through an immediate employer. And
the Employee’s share @ 1.75% has to be recovered by making a deduction from their wages for
the respective salary/wages period.
In case, if the employee is drawing upto Rs. 70/- as daily average wage, he is exempt from
payment of his share of contribution. However, the employer has to pay employer’s share of
4.75% of the Salary payable to the employees.
As discussed earlier, the statutory features viz., EPF & ESI etc., are required to be configured in
F11: Statutory & Taxation Features. In this section, we will discuss, recording of transactions
related to computation and contribution of Employee State Insurance.
Lesson Objectives
On completion of this lesson, you will be able to
Process Employer’s Contribution to Employees’ State Insurance (ESI)
Payment of ESI Contributions
Generate the ESI payment Challan

Accounting for Employer ESI Contributions
110
Illustration 1:
On 1st June 2009, the list of new joinees with their Salary details are given below:
Employee Name Department Date of Joining
Suresh Administration 1-6-2009
Rajesh Sales 10-6-2009
The Salary details for the above new employees are listed in the table below:
Pay Head Suresh rajesh
Basic Pay 4,500 5000
House Rent Allowance 40% 40%
Conveyance 600 800
Overtime Pay — —
Variable Pay User — defined
Gratuity Expenses (Provisional) Only for reporting purpose
Employee’s PF Contribution @ 12% Applicable based on Slab Rates
Employee’s ESI Contribution @ 1.75% Applicable based on Slab Rates
Profession Tax Applicable based on Slab Rates
The Attendance details for the month of June 2009 are given as shown:
Attendance/Production
Types
Vijay
Kumar
Rahul Mahesh Ajay Suresh Rajesh
Present Days 26 21 20 22 23 21
Overtime hours 120 Min 600 Min
The Variable Pay details for the month of June 2009 are given as shown:
Create the above employees and their Salary details and then process the Salaries, PF Contribu-
tions for the month of June 2009, in the manner as discussed in the earlier chapters. In Tally.ERP
9, follow the steps given below to process Employer contribution towards Employees’ State Insur-
ance:
Create Employer ESI Contribution Masters
Alter/Modify Salary Details
Processing Employer ESI Contribution
Payment of ESI
Particulars Vijay
Kumar
Variable Pay 0 0 0 0 0 0

111
5.1 Creation of Employer ESI Contribution Masters
In Tally.ERP 9, Employer and Employee’s contribution towards Employees’ State Insurance (ESI)
are required to be created separately for appropriate Accounting and reporting. Create the
following ledgers in Tally.ERP 9:
Employer Contribution Pay Head
ESI payable Ledger
I. Create Employer ESI Contribution @ 4.75% Pay Head
Pay Head
Name
Pay Head Type Statutory Pay
Type
Under Affect
Net
Salary
Calculation
Type
Employer ESI
@ 4.75%
Employer’s Statu-
tory Contributions
Employee
State Insur-
ance
Indirect
Expenses
No As Com-
puted Value
Go to Gateway of Tally >Payroll Info >Pay Heads >Create
1. Type Employer ESI @ 4.75% as the Name of the Pay Head
3. Select Employee State Insurance in the Statutory Pay Type field from the Employer’s Stat-
utory Contributions drop down
Figure 5.1 Pay Head Creation - Employer ESI
4. Specify the group as Indirect Expenses in the Under field and press Enter

112
5. Set Affect Net Salary to No and press Enter
6. In the Calculation Type and Calculation Period fields, As Computed Value and Months are
defaulted automatically based on the Statutory Pay Type selected.
Enter
Select On Specified Formula in the Compute field and press Enter
In the Compute subscreen,
Select House Rent Allowance as the second Pay Head in the Add Pay Head Func-
tion
Similarly, select Conveyance and Overtime Pay in the Add Pay Head function
The Compute sub-screen is displayed as shown:
Figure 5.2 Employer ESI Pay Head Creation – Compute sub-screen
Any Earning Pay component of a recurring nature will be subject to ESI calcu-
lation viz., Basic Pay, Dearness Allowance, House Rent Allowance, Convey-
ance, Overtime Pay and so on.
If you wish to consider a Pay Head (not regular in nature) for ESI Computa-
tion but don’t want to consider the same for ESI Eligibility, then set the
option Exclude for ESI Eligibility to Yes in the Pay Head alteration screen.
The option Exclude for ESI Eligibility will be available in the Pay Head
screen by setting the option Allow to Exclude Pay Head for ESI Eligibility
from the Pay Head Configurations.
Select End of List and press Enter to accept the screen

113
Specify 1-4-2009 in the Effective From date field and press Enter, the From Amount col-
umn is automatically skipped, assuming the amount to be zero
The Amount Upto field is skipped and automatically defaulted with the amount specified in
the Payroll Statutory Details screen in F11: Satutory & Taxation
Select Percentage in the Slab Type field
Specify 4.75% as the Value Basis Percentage in the Value Basis field and press Enter
Figure 5.3 Employer ESI Pay Head Creation
In Tally.ERP 9, the Earning Payheads which are selected for computation of Employer ESI contri-
bution are listed in the Specified Formula for easy reference. You can alter / modify the criteria for
calculation, by pressing Enter in the Compute field and redefining the Function Pay components.
Specify 4.75% as the Value Basis Percentage in the Value Basis field and press Enter

114
The completed Employer ESI Contribution Pay Head Creation screen is displayed as shown:
Figure 5.4 Completed Employer ESI Pay Head
II. Create ESI Payable Ledger
Create ESI Payable Ledger as explained below:
1. Type ESI Payable in the Name field
2. In the Pay Head Type field select Not Applicable
3. Specify the group as Current Liabilities in the Under field and press Enter
ESI Payable Not Applicable Current Liabilities

115
The completed ESI Payable Ledger creation screen is displayed as shown:
Figure 5.5 ESI Payable Ledger Creation
5.2 Salary Details setup
Once the required Employer Contribution Pay Heads are created, the salary details of the
Employees should be updated to constitute the Employer Contribution pay head ledgers for
automatic calculations based on the monthly payments made to the Employees.
Create / Alter Salary Details Master
To update the salary details for the Employees, follow the steps given below:
1. Select Vijay Kumar from the List of Groups / Employees
2. Tab down to the last line and select Employer ESI @ 4.75% Pay Head from the List of Pay
Heads
3. Press Enter to select End of List

116
The completed Salary Details Alteration screen is displayed as shown:
Figure 5.6 Salary Details Alteration screen
4. Press Enter to Accept
It is necessary to include Employer ESI Contribution Pay Head in the
Salary Structure of the Employees, to automate the Computation of
Employer ESI Contribution on the basis of payments made to Employ-
ees.
While, including the Employer Contribution Pay Heads in the Salary
Details master, the order of precedence in which the Pay Heads are
included on the basis of their calculation criteria i.e.,
i. Earning Pay Heads
ii. Deduction Pay Heads
iii. Employee PF Contribution Ledgers
iv. Professional Tax or Income Tax Ledger (if any)
v. Employer PF Contribution Ledgers
vi. Employer ESI Contribution Ledgers
vii. Gratuity (Gratuity is calculated on Basic Pay + DA, hence Gratuity Pay
Head can be sequenced in the Salary details of an Employer in any
order).
Similarly, include Employer ESI @ 4.75% Pay Head in the Salary details of all other Employees.

117
5.3 Processing Employer ESI Contribution
In Tally.ERP 9, you can process Employer ESI Contributions and make the payment towards ESI
comprising of Employees’ and Employer’s ESI Contribution through a challan. To process the ESI
Contribution for June 2009, follow the steps given below:
4. In the Payroll Auto Fill subscreen,
Select ESI Contribution from the Process List as shown:
Figure 5.7 Payroll Autofill - ESI process selection
Select Primary Cost Category as Employee Category field

118
Select ESI Payable Ledger in the Payroll Ledger field as shown:
Figure 5.8 Payroll Autofill – Payroll Ledger selection
5. Press Enter to accept and go back to the Payroll Voucher screen

119
The completed Employer ESI Contribution Voucher Creation screen is displayed as shown:
Figure 5.9 Completed ESI Voucher
5.4 Payment of ESI
In Tally.ERP 9, once the process for Employee and Employer contributions to Employee’s state
Insurance is implemented in the manner as discussed in earlier sections, the total amount
payable to ESIC comprising of Employee’s Contribution as well as Employer’s contribution to ESI
is accumulated separately in the ESI Payable Ledger. At the time of making the payment to ESIC,
a payment voucher is required to be passed.
The Employer ESI contribution will be computed automatically upon
selection of ESI Contribution Process during Payroll Voucher Entry.
However, only for employees those who meet the criteria of monthly
earnings not exceeding the prescribed limits will be subject to ESI Con-
tribution.
In the same way while processing Salaries, the Employees ESI Contri-
bution will also be computed based on the Eligibility amount prescribed
in F11: Statutory & Taxation Features.

120
To process the payment of ESI and generate ESI Challan, follow the steps given below:
Step 1: Create ESI Payment Voucher
4. In the Payment Auto Fill subscreen,
Select ESI Challan from the Process List as shown:
Figure 5.10 Employee Filters subscreen - ESI Process Selection

121
Figure 5.11 Employee Filters Subscreen – Bank Ledger Selection

122
Select ESI Payable Ledger in the Payroll Ledger field
Figure 5.12 Employee Filters Subscreen - Payroll Ledger Selection
5. Press Enter to accept and go back to the Payment Voucher screen

123
6. Press Enter to prefill the Employer’s ESI Contribution amount for the eligible Employees
Figure 5.13 ESI Payment Voucher with Employer Contributions

124
7. Press Enter again, to prefill the Employee’s ESI Contribution amount against the eligible
Employees
Figure 5.14 ESI Payment Voucher with both Employee and Employer Contributions
8. Press Enter twice
9. Set Yes in the Provide Details field and press Enter
10.In the Provide Details subscreen, specify the Cheque / DD No., Cheque / DD Date and Bank
& Branch Code Details as shown:
Figure 5.15 Complete Provide Details subscreen
12.Type the details of the transaction in the narration field

125
The completed ESI Payment Voucher for the month of June 2009 is displayed as shown:
Figure 5.16 Completed ESI Payment Voucher
13.Press Enter to accept

126
Step 2: Print ESI Payment Challan
Press Pg UP from the above Voucher Entry screen
Press Alt + P, the Voucher Printing screen is displayed as shown:
Figure 5.17 ESI Voucher Printing Screen
In the Voucher printing screen, select Yes in the Print Challan field

127
The printed ESI Payment Challan for the month of June 2009 of M/s. Spectrum Software
Solutions is as shown:
Figure 5.18 Printed ESI Payment Challan

128
Lesson 6: Payment of Professional Tax
Lesson Objectives
6.1 Processing of Professional Tax Payment
Professional Tax is applicable to those individuals or professionals in India who are involved in
any profession or trade. The state government of each state governs and administers the levy and
collection of Professional Tax in the respective State.The state is empowered with the
responsibility of structuring as well as formulating the professional tax criteria for the respective
state. Professional tax is charged on the income of Individuals, profits of business or gains in
vocations as per the list II of the Indian Constitution.
In India, Professional Tax slabs vary from state to state and some of the states have formulated
different professional tax slabs for men, women and senior citizens. The rates depend upon
profession, years in the profession and the amount of income or turnover and so on. In Karnataka,
the professional taxes leviable are as follows:
On completion of this lesson, you will be able to:
Process payment of Professional Tax
S.No Salary or wage earners whose salary or wage or
both, as the case may be, for a month is,
Tax Amount
(a) Less than Rs.5000 Rs. 0 Per month
(b) Not less than Rs. 5,000 but less than Rs.8,000 Rs. 60 Per month
(c) Not less than Rs.8,000 but less than Rs.10,000 Rs.100 Per month
(d) Not less than Rs.10,000 but less than Rs.15,000 Rs.150 Per month
(e) Rs. 15,000 and above Rs.200 Per month

Payment of Professional Tax
129
The creation of Professional Tax Pay Head is discussed in detail in the Creation of Masters
chapter and the procedure to process Professional Tax Deduction from Employee Salaries is
discussed in detail in Processing Payroll in Tally.ERP 9 Chapter. In this section, we will discuss
the recording of transactions related to payment of Professional Tax.
Illustration 1:
On 30th April, 2009 M/s. Spectrum Software Solutions made a payment of Professional Tax
for the month of April 2009.
Create Payment Voucher
4. In Employee Filters screen,
Select Professional Tax Payment from the Process List
Specify 1-4-2009 and 30-4-2009 in the From and To date fields respectively

130
Figure 6.1 Employee Filters screen - Payment Ledger Selection
Select Professional Tax in the Payroll Ledger field

131
The completed Employee Filters screen will is displayed as shown:
Figure 6.2 Completed Employee Filters screen
Press Enter to accept the screen and go back to the Payment Voucher screen
Press Enter to prefill the Professional Tax amount in the Payment Voucher

132
The completed Professional Tax Payment Voucher is displayed as shown:
Figure 6.3 Completed Professional Tax Payment Voucher
5. Press Enter to Accept.
Similarly, process the Professional Tax payments for other months.
The creation of Professional Tax Pay Head is discussed in detail in Cre-
ation of Masters chapter.
The procedure to process Professional Tax Deduction from Employee
Salaries is discussed in detail in the chapter Processing Payroll in
Tally.ERP 9.

133
Lesson 7: Tracking of Salary Advances / Loans
Lesson Objectives
Tally.ERP 9 helps you track Salary Advance / loans given to employees and provides the flexibility
to specify simple to complex criteria for Recovery of Salary Advances or loans viz., Flat or manual
deduction and provision of lumpsum loan recovery and so on. Tally.ERP 9 also allows you to
generate a Month wise break-up report for the amount of loan disbursed, recovery of instalments
made and balance amount of Loan / Salary advance. Further, you can also use the Interest Cal-
culation feature of Tally.ERP 9 to compute interest on loans to employee etc.
In Tally.ERP 9, tracking of Salary Advances / Loans paid to employees follow the steps given
below:
Creation of Masters
Modify / Alter Salary Details
Payment of Salary Advance
Recovery of Salary Advance
7.1 Creation of Masters
Tally.ERP 9 allows you to create different ledgers for different types of Loans / Salary Advances.
Create the following ledger:
Track Salary Advances / Loans and recoveries in Tally.ERP 9
Staff Salary Advance Loans and Advances Loans and Advances (Asset)

Tracking of Salary Advances / Loans
134
I. Create Salary Advance Ledger
1. Type Staff Salary Advance in the Name field
2. Select Loans and Advances in the Pay Head Type field
3. Specify the group as Loans and Advances (Asset) in the Under field and press Enter
5. Type Staff Salary Advance in Name to Appear in Salary Slip field
6. Select User Defined Value in the Calculation Type field
The completed Staff Salary Advance Ledger creation screen is displayed as shown:
Figure 1.1 Salary Advance Ledger
The Calculation Type can be taken as Flat Rate if you wish to deduct the
Loan Amount in Flat installments (EMI’s). In this case the Pay Head should
be removed from the Pay Structure after the entire amount is recovered from
the Employee’s salary.

135
7.2 Modify / Alter Salary Details
In order to deduct installments or for lumpsum recovery of Salary Advance from the monthly
salaries of the employees, it is essential to include Salary Advance / Loans ledgers in the Salary
Details master of the employees. Follow the steps given to update the Salary Details masters of
the Employees:
1. Select Vijay Kumar from the List of Groups / Employees and press Enter, the Salary
Details Alteration screen appears
2. In the Salary Details Alteration screen,
3. Tab down to the last line and select Staff Salary Advance ledger in the Pay Head field
4. Select End of List and press Enter
Figure 1.2 Completed Salary details alteration screen

136
7.3 Payment of Salary Advance
In Tally.ERP 9, you may disburse the Salary advance / Loans to Employees using a Payment
Voucher as shown:
Illustration 1:
On 2nd July, 2009 M/s. Spectrum Software Solutions paid Salary Advance to the following
Employees with the mode and amount of recovery.
i. Create Payment Voucher
Setup:
Press F12: Configure and set Use Single Entry mode for Pymt/Rcpt/Contra to No
Go to Gateway of Tally > Accounting Vouchers > Payment Voucher (F5)
1. Press F2 to change the date to 2-07-09
Employee Name Salary Advance
(Rs.)
Mode of
Recovery
Recovery Amount
(Rs.) per month
Rahul 10,000 Monthly Salary 5,000
Rajesh 3,000 Monthly Salary 1,500

137
2. In the Dr field, select Staff Salary Advance ledger from the list of ledgers
Figure 1.3 Payment Voucher - Salary Advance Ledger selection
3. Specify 13000 in the Dr Amount field and press Enter, the Cost Allocations for subscreen
appears
4. In the Cost Allocations for subscreen,
Select Primary Cost category in the Employee Category field
Select the required Employee (Rahul) from the list of Cost Centres and press Enter

138
The Cost Centre Allocations screen is displayed as shown:
Figure 1.4 Payment Voucher – Cost Centre Allocation screen
Specify 10000 in the Amount field
Similarly, select other Employee (Rajesh) from the List of Cost Centres and specify the
amount (i.e., 3,000)

139
The Completed Cost Allocation for subscreen is displayed as shown:
Figure 1.5 Cost Centre Allocation – Sub-screen
Press Enter to accept and go back to the Payment Voucher
5. Select HDFC Bank in the Cr field and press Enter
6. Press Enter to accept the Amount
7. Type the details of the transaction in the narration field

140
The completed Payment Voucher for Salary Advance is displayed as shown:
Figure 1.6 Completed Payment Voucher
7.4 Recovery of Salary Advance
In Tally.ERP 9, you may deduct or recover Salary Advance / Loans from Employees in Install-
ments by defining the criteria for deduction while creating the Salary Advance Pay Head; i.e., Flat
rate or manual deduction by specifying a user-definable amount. To recover salary advance /
loan, follow the steps given below:
Process the Attendance Vouchers for the month of July 2009 in the manner discussed in earlier
chapters, based on the following details:
Attendance records for July 2009:
Attendance/ Pro-
duction Types
Vijay
Kumar
Present Days 26 24 22 25 21 20

141
ii. Create Payroll Voucher
Press Ctrl+F4 for Payroll Voucher
Press F2, specify the date as 31-7-2009 and press Enter
Press Alt+A (Payroll Auto Fill) to prefill employee payroll details
In the Employee Filters screen,
Specify 1-7-2009 in the From field
Specify 31-7-2009 in the To field
Select All Items as Employee/Group
Press Enter to accept the screen and go back to Payroll Voucher
The Payroll Voucher Creation screen is displayed as shown:
Tab down to Staff Salary Advance ledger field of Rahul and specify 5000 as the amount
to be deducted
Figure 1.7 Payroll Voucher - Salary Advance Recovery Entry
Similarly, tab down to Staff Salary Advance ledger field of Rajesh and specify 1500 as
the amount to be deducted

142
Similarly, enter the 1500 in Staff Salary Advance for Rajesh
The completed Payroll Voucher for July 2009 is displayed as shown:
If there are multiple Loans given to the Employees and if you wish to keep a
track of recovered loan amount against the Loan given, then you need to
pass a separate payroll voucher in ‘As Voucher’ format, as the bill-wise
details screen won’t appear in the ‘As Pay Slip’ format.

143
Lesson 8: Accounting for Pay Revision &
Arrears
Lesson Objectives
Tally.ERP 9 provides a facility to process Arrears / Increments for a current Period as well as for a
prior period. It allows you to compute Arrears for a retrospective period, by defining the effective
date of such revisions or increments. Consider the following scenarios to understand the steps
involved in processing Salary revisions / Arrears calculation in Tally.ERP 9.
Salary Revision / Arrear Calculation for Prior Period
Salary Revision / Arrear Calculation for Current Period
8.1 Salary Revision / Arrear Calculation for Prior Period
Tally.ERP 9 allows you to record Arrear calculation voucher for all the eligible months separately
or together with the current month payroll voucher. For instance, in the below Illustration, for the
months from May 2009 to July 2009, the Payroll vouchers have been already processed and only
the arrear calculation needs to entered. In such cases, the Arrear calculation vouchers can be
passed on the last day of each applicable month separately or a single voucher can be passed
i.e., arrear calculation voucher for all preceeding months (from May 2009 to July 2009) plus
current month salaries, by defining the complete pay period i.e., 01-05-2009 to 31-08-2009.
Illustration 1:
On 5th August, 2009 M/s. Spectrum Software Solutions revised the Salaries for the
following Employees. Such a revision is effective from 1st May 2009.
Record Pay Revisions and Arrears in Tally.ERP 9

Accounting for Pay Revision & Arrears
144
The revised Salary structure is as follows:
Employee / Pay Components Basic HRA Conveyance Variable Pay
Mahesh 50000 40% 2000 User-defined
Before processing the Payroll voucher for Salary revisions, it is essential to update the Salary
Details of the Employee, so as to take into consideration the declared Salary Revision / arrear
payment for/from the relevant period.
Step 1: Modify / Alter Salary Details
Select Mahesh from the List of Groups / Employees
Tab down to End of List, by pressing Enter
Specify 01-05-2009 in the Effective From field and press Enter
Select Copy From Previous Value from the Start Type drop down list
Figure 8.1 Salary Details Alteration Screen

145
Press Enter to prefill the pay structure (comprising of Earning & Deduction Pay Heads) of
the preceeding period for the specified period
Press Enter on Basic Pay Pay Head and alter the amount to 50000
Tab down to Conveyance Pay Head and alter the amount to 2000
Press Enter to go to the End of List
Figure 8.2 Completed Salary revision screen
Start Type Options:
Copy From Parent Value: This option is selected, when the pay structure
details of the Parent group (to which Employee Group, the employee is
grouped under or falls) is required to be prefilled in the Salary details master.
Copy From Previous Value - This option is selected, when the pay structure
details of the Employee for a preceeding period is required to be prefilled for a
future period, in the Salary details master.
Start Afresh: This option is selected, when the pay structure details of the
Employee has to be created newly.

146
Step 2: Arrear Calculation Voucher
In the Payroll Auto Fill subscreen
Specify 1-5-2009 and 31-7-2009 in the From and To fields respectively
Select Mahesh as Employee/Group
The completed Auto Fill subscreen is displayed as shown:
Figure 8.3 Payroll Auto Fill subscreen
Press Enter to automatically prefill the salary arrear amounts for the selected period

147
The completed Payroll Voucher for Arrear calculation is displayed as shown:
Figure 8.4 Payroll Voucher – Arrear calculation
Step 3: Payment of Arrears
Press F5 for Payment Voucher
Press F2, specify the date as 05-08-2009 and press Enter
Press Alt+A (Payroll Auto Fill) to prefill payroll payment details
In the Payroll Auto Fill subscreen,
Select Salary Payment in the Process for field
Specify 05-08-2009 as Voucher Date
Select Primary Cost Category under Employee Category
Select Mahesh in Employee/Group field
Select HDFC Bank in the Bank / Cash Ledger
Press Enter to prefill the salary arrears amount for the selected period

148
The completed Salary Arrears Payment voucher of Mahesh for the period from May 2009 to July
2009 is displayed as shown:
Figure 8.5 Salary Arrears Payment Voucher
Press Enter to Accept.
The Salary Arrears / Increments may result in increase in Earning Pay com-
ponents which in turn may result in an increase in the tax liability i.e., an
increase in Basic Pay will result in an increase in HRA and such additional
income will be liable to Income Tax or Payroll taxes viz., PF, ESI and PT. The
procedure to make payments of PF, ESI or PT has been discussed in the
previous chapters.

149
8.2 Salary Revision / Arrear Calculation for current Period
Illustration 2:
On 15th August 2009, M/s. Spectrum Software Solutions revised the Salaries for the
following Employees. Such revision is effective from the current month i.e., August 2009.
The revised Salary structure is as follows:
Employee / Pay Components Basic HRA Conveyance Variable Pay
Ajay 11000 30% 2000 User-defined
The Attendance records for August 2009 is as follows:
Attendance/ Production
Types
Vijay Kumar Rahul Mahesh Ajay Suresh Rajesh
Present Days 26 22 25 26 26 26
Before processing the Payroll voucher for Salary revisions, it is essential to update the Salary
Details of the Employee to take effect the declared Salary Revision / arrear payment for/from the
relevant period.
Step 1: Modify / Alter Salary Details
Select Ajay from the List of Groups / Employees
Tab down to End of List, by pressing Enter
Specify 01-08-2009 in the Effective From field and press Enter
Select Copy From Previous Value from the Start Type drop down list

150
The Salary Details Alteration screen is displayed as shown:
Figure 8.6 Salary Details Alteration screen
Press Enter to prefill the pay structure (comprising of Earning & Deduction Pay Heads) of
the preceeding period for the specified period
Press Enter on Basic Pay Pay Head and alter the amount to 11000
Press Enter on HRA Pay Head and alter the percentage to 30% (To alter the percentage,
ensure in F12: Configure, Allow to Override Slab Percentage is set to Yes)
Tab down to Conveyance Pay Head and alter the amount to 2000
StartType Options
Copy From Parent Value: This option is selected, when the pay struc-
ture details of the Parent group (to which Employee Group, the
employee is grouped under or falls) is required to be prefilled in the Sal-
ary details master.
Copy From Previous Value - This option is selected, when the pay
structure details of the Employee for a preceeding period is required to
be prefilled for a future period, in the Salary details master.
Start Afresh: This option is selected, when the pay structure details of
the Employee has to be created newly.

151
Press Enter to go to the End of List
Figure 8.7 Completed Salary Alteration screen
Step 2: Record Attendance
Record Attendance voucher in the manner as explained in previous chapters.

152
The completed Attendance Voucher for August 2009 is displayed as shown:
Figure 8.8 Completed Attendance Voucher
Step 3: Process Payroll Voucher
Effective August 2009, the revised salary for Ajay will be computed automatically, while process-
ing Payroll voucher for the month of August along with the other employees or you may also
choose to process Ajay’s Payroll voucher separately, if required.
In the Payroll Auto Fill subscreen
Select Ajay in the Employee/Group field
Press Enter to prefill the salary amount (inclusive of increment amount) for the current
period

153
The completed Payroll Voucher for August 2009 is displayed as shown:
You may process Employer and Employee’s contribution to Provident Fund and Employee’s State
Insurance and payment of Profession Tax in the manner as discussed in the earlier chapters.

154
Lesson 9: Processing Payroll for Contract
Employees
Lesson Objectives
Tally.ERP 9 provides a simplified process for tracking and processing salaries for casual and
contract workers and helps in the generation of contract related reports. Tally.ERP 9 allows you to
process salaries for contractual employees for their services rendered during the agreed tenure.
You may compute salaries on hourly or production basis as agreed upon, by defining the required
criteria for the Pay components.
In this Chapter, we will discuss the recording of transactions related to computation of salaries for
Contractual employees.
Illustration 1:
On 5th August 2009, M/s. Spectrum Software Solutions hired two persons on contract.
The list of employees along with the contract details is as follows:
S. No. Name of Employee Department / Group Tenure Start Date End Date
1 James Contract Employees 6 Months 5 Aug 09 5 Feb 10
2 Vineet Contract Employees 9 Months 5 Aug 09 5 May 10
Process Salaries for Contract Employees

Processing Payroll for Contract Employees
155
The Salary details for the above contract employees is as shown:
The same is accounted for as shown:
In Tally.ERP 9, execute the following steps to process Salaries for Contract Employees:
Create Employee Masters
Create Pay Heads
Record Attendance details
Create Salary Details
Process Payroll
9.1 Create Employee Masters
As discussed in the earlier chapters, you need to create the following Employee Masters to:
1. Employee Group
2. Employees
I. Create Employee Group Master
Create a new Group Contract Employees by executing the following steps:
Go to Gateway of Tally > Payroll Info. > Employee Groups > Create
Select Primary Cost Category from the List of Categories in the Category field
Type Contract Employees in the Name field
Select Primary in the Under field and press Enter
The completed Employee Group Creation screen is displayed as shown:
Figure 9.1 Completed Employee Group Creation
Employee / Pay Heads Basic Wages Overtime Local Conveyance
James 2000 50 / hr On Actuals
Vineet 2500 50 / hr On Actuals

156
II. Create Employee Master
Go to Gateway of Tally > Payroll Info. > Employees > Create
Select Primary Cost Category from the List of Categories in the Category field
Type the Name of the Employee in the Name field
Select Contract Employees in the Under field
Type the Date of Joining as 05-08-2009
Enter the other Employee Information.
The completed Employee Creation screen is displayed as shown:
Figure 9.2 Employee Creation screen
Similarly, create other Employee Masters i.e., Vineet.
9.2 Create Pay Heads
Create the following Pay Heads:
Pay Head Pay Head Type Under AffectNet
Salary
Calculation
Type
Calcula-
tion Period
Basic Wages Earnings for
Employees
Indirect
Expenses
Yes on Attendance Months
Overtime Earnings for
Employees
Indirect
Expenses
Yes on Production Months
Local Con-
veyance
Reimbursements
to Employees
Indirect
Expenses
Yes As User
Defined Value
-

157
i. Create Basic Wages Pay Head
The completed Basic Wages Pay Head creation screen is displayed as shown:
Figure 9.3 Pay Head Creation – Basic Wages
Similarly, create Overtime Pay Head with On Production as the Attendance Type.

158
ii. Create Local Conveyance Pay Head
The completed Local Conveyance Pay Head Creation screen is displayed as shown:
Figure 9.4 Pay Head Creation – Local Conveyance
iii. Salary Details setup
Create the salary details for the above contract employees as discussed in the earlier chapters.

159
The completed Salary Details creation screen for James is displayed as shown.
Figure 9.5 Salary Details creation screen
Similarly, create the Salary Details for Vineet.
9.3 Record Attendance details
The Attendance and Overtime Details for Contract Employees for August 2009 is as shown.
Step 1: Create Attendance Voucher
Go to Gateway of Tally > Payroll Vouchers > Press Ctrl+F5 for Attendance Vouchers
Attendance/Production Type James Vineet
Absent 1 2
Overtime 15 Hrs 17 Hrs

160
The completed Attendance Voucher for the Contract Employees is displayed as shown:
Figure 9.6 Completed Attendance Voucher
Step 2: Create Production Voucher
Go to Gateway of Tally > Payroll Vouchers > Press Ctrl+F5 for Attendance Vouchers

161
The Production Voucher for Overtime hours is displayed as shown:
Figure 9.7 Completed Production Voucher
9.4 Process Payroll
On 31st August 2009, M/s. Spectrum Software Solutions processed salaries for the
contract employees through Cash. The Local Conveyance for August 2009 is as follows:
Reimbursements Particulars James Vineet
Local Conveyance 1250 1225
Create Payroll Voucher
Go to Gateway of Tally > Payroll Vouchers > Press Ctrl+F4 for Payroll Voucher

162
The completed Payroll Voucher for Contract Employees for the month of August 2009 will
appear as shown:

163
Lesson 10: Payroll Reports
Payroll Reports help you ascertain the payroll expenses for a specified month or for year-to-date
(YTD) transactions for a particular employee/ group along with the Attendance and Production
details. You can also view the statutory forms required for Provident Fund and Employee State
Insurance. In Tally.ERP 9, the Payroll reports can be broadly categorized into two viz.,
Payroll Reports
Payroll Statutory Reports

Payroll Reports
164
10.1 Payroll Reports
In Tally.ERP 9, you can generate the following Payroll related reports.
Chart showing Payroll Reports in Tally.ERP 9
Figure 10.1 Payroll Reports in Tally.ERP 9

Payroll Reports
165
We shall discuss each report in detail in the sections as explained below:
10.1.1 Pay Slip
A Pay Slip refers to a document issued to an employee, which itemises each component of his/
her earnings and deductions and the net amount paid for a given pay period. It provides particu-
lars on how the net amount has been arrived at i.e., how much money has been earned and how
much tax / deductions have been made.
Display Pay Slip
Go to Gateway of Tally > Display > Payroll Reports > Statements of Payroll > Pay Slip >
Single Pay Slip
Select the required Employee and press Enter
The Pay Slip for the selected employee is displayed as shown:
Figure 10.2 Pay Slip
In Tally.ERP 9 Payroll, the Pay Slip can be configured to vertically display the details of attend-
ance, in terms of attendance or production, with Year to Date Values (YTD).

Payroll Reports
166
Press F12: Configure and set the following options to Yes
Figure 10.3 Pay Slip F12: Configuration screen
Some of the options in F12: Configuration screen, are by default set to Yes
viz., Show Employee Details, Show Attendance/Production Details,
Show Attendance/Production Groups, Remove Zero Entries for Attend-
ance/Production also based on the Payroll Features / Payroll Statutory
features enabled during voucher entry.

The F12:Configuration options in Pay Slip are explained as follows:
Show Vertical Pay Slip – Set this option to Yes to view / print the Pay
Slip in vertical format, i.e. align Deductions pay heads below Earnings
pay heads
Show Employee Details – Set this option to Yes to display employee
information as entered in the employee master
Show Passport Details – Set this option to Yes to display an
employee’s passport details
Show Visa Expiry Date – Set this option to Yes to display an
employee’s visa expiry date
Show Joining Date – Set this option to Yes to display the date of joining
for Employee
Show Attendance/Production Details – Set this option to Yes to dis-
play Attendance/Production information
Show Attendance/Production Groups – Set this option to Yes to dis-
play the grouping of the Attendance/Production data as defined during
the creation of Types
Display Attendance/Production Type in Tail Units – For compound
units used in Attendance/Production Type, set this option to Yes, to dis-
play the value of the Attendance/Production details in the Tail unit. If this
option is set to No, the Production units will display in primary units
Show Year To Date values – Set this option to Yes to display the cumu-
lative value of Attendance/Production records and Earnings /Deductions
for any given period
Show Gross Salary - Set this option to Yes by setting the ‘Show Year
To Date values’ to No, to view Gross Earnings and Deductions for any
given period
Remove Zero Entries – Set this option to Yes to remove the Earnings/
Deductions components with Zero value from the Pay Slip
For Attendance/Production also – Set this option to Yes to remove
Attendance/ Production records with zero values from the Pay Slip
Appearance of Employee Names – Select the appropriate name style
to appear in the Pay Slip (i.e., Alias (Name), Alias only, Name (Alias),
Name only)
Appearance of Pay Head Names – Select the appropriate name style
to appear for each Pay Head in Pay Slip (i.e. Alias(Name), Alias only,
Name(Alias), Name Only, Pay Slip Name)
Payroll Reports
167

Payroll Reports
168
The Pay Slip with the above configurations is displayed as shown:
Figure 10.4 Pay Slip with YTD values
The Pay Slip now displays the Attendance with Present / Overtime details, Year to Date balance,
and so on. To view the Pay Slip in vertical form, press F12: Configure and set Show Vertical Pay
Slip to Yes.

Payroll Reports
169
The Vertical Pay Slip is displayed as shown:
Figure 10.5 Configured Pay Slip with Vertical Display
You can view additional information in the Pay Slip, by pressing Alt+F1.

Payroll Reports
170
The detailed Pay Slip is displayed as shown:
Figure 10.6 Detailed Pay Slip
Period Button – By default, the Pay Slip for the current month is displayed.
However, you can change the period by pressing F2: Date and defining the
required date. This button can be used to display multiple period payroll infor-
mation to view/print a consolidated Pay Slip.
Employee Button – From the existing Pay Slip of an employee, you can tog-
gle between employees by pressing F4: Employee.
The voucher number, date and the number of attendance or payroll records are displayed as
shown in the above image. This is very useful when multiple attendance/payroll vouchers are
entered for the same payroll period. You can drill down to the voucher level for reference or to
effect an alteration by pressing Enter on the required record.

Payroll Reports
171
Printing Pay Slip
Press Alt+P from the Pay Slip screen, the Printing Pay Slip screen is displayed as
shown:
Figure 10.7 Pay Slip Print Configuration screen
Some of the configuration in the Printing screen, are similar to F12: Configure and can be config-
ured from either of the screens. Additionally, the Show Authorised Signatory option is available
in the above screen.
In the Printing Pay Slip screen, press Backspace and enable the required option as
required
Additional Options in the Pay Slip Printing screen:
Show Pay Slip Note: This option should be set to Yes if you want to
print the Pay Slip Note to appear instead of Authorised Signatory
details. The content of this Note can be modified from F12: Configura-
tion screen from Gateway of Tally.
Show Pay Slip Message: This option should be set to Yes if you want to
print the customised message on the Pay Slip for specific occasions.
e.g. Happy new Year!!!!

Payroll Reports
172
The printed Pay Slip of Mr. Vijay Kumar is displayed as shown:
Figure 10.8 Printed Pay Slip

Payroll Reports
173
Emailing Pay Slip
Single Pay Slip
Press Alt+M, the Mailing Pay Slip screen is displayed as shown:
Figure 10.9 Mailing Pay Slip sub screen
In the Mailing Pay Slip screen,
Specify the SMTP Server Name in the Email Server field
Press Enter to accept the From & From E-mail Address fields (The company name &
Email id is defaulted from the company master, however you can modify the same)
Specify the Authentication User Name and Password, if required
Set Use SSL to No
Select HTML (Web publishing) in the Format field
Select the required Resolution from the Resolutions drop down
Press Enter to accept the To Email Address (The Employee address is defaulted from
the Employee Master, however, you may modify as required)
Enter the other information as required

Payroll Reports
174
The completed Mailing Pay Slip configuration screen is displayed as shown:
Figure 10.10 Completed Mailing Pay Slip sub screen

Payroll Reports
175
Press Enter to Email the Pay Slip
Mailing Pay Slip Configurations
Email Server – Name of the SMTP mail server should be specified.
From - The From field is prefilled with the name of your Company as
specified in the Company Creation screen. You can change the same if
you want some other name to be displayed.
From E-mail Address is pre-filled with the Company’s e-mail address
as filled during the Company Creation.
Authentication User Name and Password field should be filled if your
SMTP Server needs Authentication for sending e-mails.
Use SSL - This is set to Yes for the servers using the Secured Socket
Layer protocol for extra security reasons.
Format - you can select the format in which the Pay Slip should be
viewed by the mail recipient.
Resolution - appropriate resolution for the Emailed Pay Slip can be
selected in this field.
To E-Mail Address - this will be selected automatically if the e-mail
address is provided in the Employee Master. Or else, you need to spec-
ify the same at the time of emailing.
CC To (if any) - If you want the Pay Slip to be sent to another e-mail
address, it can be specified here.
Subject - specify the Subject of email to be seen by the user.
Additional Text (if any) - This will appear in the body of the email that is
sent.
Information Sent - The option to send the E-mail as an Attachment or
as a direct view can be selected here.
Other options are similar same as Pay Slip Configurations.

Payroll Reports
176
The Pay Slip sent by e-mail when viewed from the mail box of the employee is as shown:
Figure 10.11 Emailed Pay Slip
Exporting Pay Slip to MS Excel
Single Pay Slip
Press Alt+E, the configuration screen to select the required format appears as shown:
In the Export screen, specify the details as shown:

Payroll Reports
177
The completed Export screen is displayed as shown:
Figure 10.12 Export Pay Slip screen
The Pay Slip exported into Excel will appear as shown:
Figure 10.13 Exported Pay Slip
The Pay Slip can also be exported to pdf, jpeg or other formats as per the requirement.
10.1.2 Multi Pay Slips
Tally.ERP 9 provides the flexibility to print, E-Mail or export selected or all Pay Slips on Click of a
Button.
Before E-mailing the Pay Slips to all Employees, you can check whether the Email ID’s are entred
correctly for all Employees.

Payroll Reports
178
E-mail IDs
To check the E-Mail IDs entered,
Go to Gateway of Tally > Display > Payroll Reports > Statements of Payroll > Pay Slip > E-
Mail IDs
Figure 10.14 E-Mail IDs - Exceptions Only
The above report displays the Employees’ for whom the E-Mail iD’s are either not entered or
incorrectly entered. You can press Ctrl+Enter to add or alter the E-Mail ID’s for the required
Employees.To view the E-Mail ID’s for all Employees you can press F5: All Items from the above
report.

Payroll Reports
179
The E-Mail IDs report for all the Employees is as shown:
Figure 10.15 E-Mail IDs for All Employees
E-Mail/Print/Export Multi Pay Slips
To E-Mail/Print/Export all the Pay Slips or selected Pay Slips,
Multi Pay Slips

Payroll Reports
180
Select the appropriate Employee Category and Employee Group in the Employee FIlters
subscreen as shown:
Figure 10.16 Employee Filters
Press Enter to view the Multi Pay Slip report as shown:
Figure 10.17 Multi Pay Slip screen

Payroll Reports
181
Tally.ERP 9 provides the flexibility to E-Mail/Print or Export all Pay Slips from the above screen
using the standard Alt+M/Alt+P/Alt+E buttons from the above screen.
The options in the email/print and Export screens are similar to Single Pay Slip report already dis-
cussed.
10.1.3 Pay Sheet
A Pay Sheet is a columnar report which displays the Group/Department-wise break-up of employ-
ees’ earnings and deductions for the selected month.
Go to Gateway of Tally > Display > Payroll Reports > Statements of Payroll > Pay Sheet
Select the All Items in the Name of Employee Category field
Select All Items in the Name of Employee / Group as shown:
Press Enter to display the Pay Sheet
To E-Mail/Print/Export Pay Slips for selective Employees, you have to select
the required Employees using the Space bar.
If the cursor is on a particular Category or a Group, then the Pay Slips
belonging to that Category or Group only will be E-Mailed/Printed/
Exported.

Payroll Reports
182
The Pay Sheet is displayed as shown:
Figure 10.19 Pay Sheet
You can further configure the Pay Sheet to display the net amount, column subtotals, Category/
Group subtotals, user-defined Pay Slip names, Employee names and sort it by Employee number
in the F12: Configure.
The F12: Configuration from the Pay Sheet screen is displayed as shown:
Figure 10.20 F12: Configuration

Payroll Reports
183
The F12:Configuration options in the Pay Sheet are explained as follows.
Appearance of Pay Head Types – Select the required Pay Head
Types from Deductions, Earnings or All Items.
Show Net Amount Column – Set this option to Yes to display the Net
Payable Column.
Show Column SubTotals – Set this option to Yes to display the subto-
tals of Earnings/Deductions pay head columns.
Remove Zero Entries – Set this option to Yes to eliminate Earnings/
Deductions pay heads with Zero values.
Show Pay Slip Names for Ledgers – Set this option to Yes to display
the Name defined in the Appear in Pay Slip field in the pay head master.
Include Employee Groups & Categories – Set this option to Yes to
display Category-wise/ Group-wise pay sheet. If this option is set to No,
the Pay Sheet will appear Employee-wise.
Show Category/Group Total – Set this option to Yes to display Cate-
gory and Group-wise columnar pay head totals.
Show Grand Total – Set this option to Yes to display the sum of all pay
head columns appearing in the report.
Show Attendance Details - Set this Option to Yes to display the Attend-
ance for the Employees
Display Production types in Tail Units - Set this Option to Yes to show
the Overtime details in minutes.
Format – Select Detailed mode to view Pay Sheet information of
employees with their respective category and group. Select Condensed
mode when only sum totals are required for each category and group.
Show Employee Number – Set this option to Yes to display employee
numbers.
Show Employee Designation - Set this Option to Yes to show the des-
ignation for employees.
Expand all levels in Detailed Format – Set this option to Yes to
expand all levels and display Employee details.
Appearance of Names – Select the appropriate name style to appear in
the paysheet (viz., Alias (Name), Alias only, Name (Alias), Name only).
Sorting Method – Sort the Pay Sheet either by Alphabetically increas-
ing / decreasing, Employee number or by the Default method.

Payroll Reports
184
Set the F12: Configuration screen is displayed as shown:
Figure 10.21 F12: Configuration screen - Pay Sheet
The Pay Sheet with the above configurations will appear as shown:
Figure 10.22 Pay Sheet

Payroll Reports
185
To view the Pay Sheet till date with Category and Group Totals,
Press Alt+F2 and change period as 01-04-2009 to 31-08-2009
Press F12: Configure and set Show Category/Group Total to Yes
The Pay Sheet with Category and Group Totals displays is displayed as shown:
Figure 10.23 Pay Sheet with Category and Group Total
To view the Pay Sheet for a particular Employee Group,
Press Ctrl+F7 from the Pay Sheet display, the Employee Filters screen is displayed
In the Employee Filters screen,
Select Sales as the Employee group
Button options:
Detailed/Condensed Button – This button (Alt+F1) is used to toggle
between the detailed and condensed modes of reporting.
Period button – This option (F2) is used to define the periodicity of the
report, i.e. for a day, week, fortnight, month, quarter, half-year, year or
any given period.

Payroll Reports
186
The Employee Filters screen is displayed as shown:

Payroll Reports
187
The Pay Sheet for the selected Employee Group is displayed as shown:
Figure 10.25 Employee Group Pay Sheet
You can also drill down from the above report to the voucher level, by highlighting the pay heads
column of the required employee and pressing Enter.
You can also print the Pay Sheet, by pressing Alt+P and specifying the required options in the
Pay Sheet Print configuration screen.
Button Options:
Employee Filter Button – By using the Employee Filter button
(Ctrl+F7), view the individual employee/ Employee group pay sheet
report.
New Column – This option (Alt+C) is used to add a new column for any
other Pay Head, which is not part of the pay structure.
Alter Column – This option (Alt+A) is used to replace an existing col-
umn in the report with another Pay Head column.
Delete Column -– This option (Alt+D) is used to delete an existing col-
umn in the report.

Payroll Reports
188
The Pay Sheet Print Configuration screen is displayed as shown:
Figure 10.26 Pay Sheet Print Configuration screen

Payroll Reports
189
The Printed Pay Sheet is displayed as shown:
Figure 10.27 Printed Pay Sheet (Landscape view)
While printing the Pay Sheet, you can choose to Increase the Line Height (for each employee
line) if you want to create space for the employee’s signature or to affix a stamp. Such a Pay
Sheet can also be used for the salary disbursement register.

Payroll Reports
190
Press Alt+P to print Pay Sheet and set the Increase Line Height for Signature/ Stamp?
field to Yes
The printed Pay Sheet with space for signature/ stamp is as shown.
Figure 10.28 Printed Pay Sheet with space for Signature/ Stamp

Payroll Reports
191
Page 2 of the Printed Pay Sheet is as shown:
Figure 10.29 Printed Pay Sheet with space for Signature/ Stamp – Page 2

Payroll Reports
192
10.1.4 Payroll Statement
A Payroll Statement is a columnar report which displays Group/Department-wise employees’
break-up of selected earnings or deductions, for a specified month or period.
Go to Gateway of Tally > Display > Payroll Reports > Statements of Payroll > Payroll
Statement
Select the required pay head and press Enter
The Payroll Statement for Basic Pay Earnings Head for the month of April 2009 is displayed as
shown:
Figure 10.30 Payroll Statement
You can also E-mail or use Export Pay Sheet Report in the manner as
discussed in Pay Slip Section. The navigation steps for E-mailing and
Exporting Pay Sheet is similar to the steps explained in Pay Slip Report.

Payroll Reports
193
You can further configure the Payroll Statement to display the Employee groups and categories,
category/group subtotals, grand totals, user-defined Pay Slip names, employee names, employee
bank details, sort it by Employee number, by pressing F12: Configure
Enter the details in F12: Configuration screen as shown
The F12: Configuration screen is displayed as shown:
The F12: Configuration options in Payroll Statement Report are as follows:
Remove Zero Entries – Set this option to Yes to remove Earnings/
Deductions pay head information with Zero values.
Show Pay Slip Names for Ledgers – Set this option to Yes, to view the
names of pay heads as specified in the Name to Appear in Pay Slip
field in the Pay Head master creation.
Include Employee Groups & Categories – Set this option to Yes to
display Category and Group-wise Employee information.
Show Category/Group Total – Set this option to Yes, to display Cate-
gory and Group-wise Totals.
Show Grand Total – Set this option to Yes, to display the sum of all the
pay head columns in the report.
Format – Select the mode Detailed to view payroll information of
employees with their respective categories and groups. Select the Con-
densed mode when only sum totals are required for each category and
group.

Payroll Reports
194
Show Employee PF Account Number – Set this option to Yes, to dis-
play the Provident Fund Account number of an employee.
Show Income Tax Number (PAN) – Set this option to Yes, to display
the Income Tax Permanent Account Number (PAN) of an employee.
Show Employee Bank Details – Set this option to Yes, to display the
Bank Account Number of an employee
Show Employee Number – Set this option to Yes, to display the
Employee Number of an employee.
Show Employee ESI Number – Set this option to Yes, to display the
State Insurance Number of an employee.
Show Employee Passport Details – Set this option to Yes, to display
an employee’s passport details.
Show Employee Visa Expiry Date – Set this option to Yes, to display
an employee’s visa expiry date.
Expand all levels in Detailed format – Set this option to Yes, to
the Payroll Statement (Alias (Name), Alias only, Name (Alias), Name
only).
Sorting Method – Sort the Payroll Statement using Alphabetical
(Decreasing), Alphabetical (Increasing), Bank details, Employee
Number, ESI Number, Income Tax Number (PAN), Passport Details, PF
Account Number, or by the default method.
The Employee PF Account Number, IT PAN Number, ESI Number, Passport
Details, Visa Expiry Date options will be available in F12: Configure only
when the options, Show Statutory details and Passport & Visa details, are
set to Yes in F12: Payroll Configuration.

Payroll Reports
195
The Payroll Statement with the above Configurations is displayed as shown:
Figure 10.32 Payroll Statement with additional information
You can also Email or Export Payroll Statement in the manner as dis-
cussed in Pay Slip Section.
The Button Bar options in Payroll Statement are same as in the Pay-
sheet report.
To view Payroll Statement for other Pay Heads, you can either select other Pay Head(s) in the
manner as discussed or you may also include other Pay Heads in the above report for compara-
tive analysis or to obtain a cumulative value, by pressing Alt+C and selecting the required Pay
Head(s).

Payroll Reports
196
The Payroll statement with additional Pay Heads will be displayed as shown:
Figure 10.33 Payroll Statement with additional Columns
10.1.5 Payment Advice
A Payment Advice is an intimation letter containing the details of employees with their bank
account numbers issued to the banker to transfer a specified sum (salaries earned) to the
employees’ bank accounts.
As discussed earlier, the contents of the Payment Advice can be altered in F12: Payroll Configu-
ration as per the employer’s requirements.
Go to Gateway of Tally > Display > Payroll Reports > Statements of Payroll > Payment
Advice

Payroll Reports
197
The Printing Configuration for Payment Advice is displayed as shown:
Figure 10.34 Printing Configuration for Payment Advice
Press Backspace and enter the details as shown above
Press Enter to print

Payroll Reports
198
The printed Payment Advice for May 2009 will appear as shown:
Figure 10.35 Printed Payment Advice

Payroll Reports
199
10.1.6 Payroll Register
A Payroll Register is a month-wise transaction summary report which displays the number of
payroll vouchers passed during a particular month. Additional information can be appended into
the Payroll Register, by inserting a new column with the required voucher type i.e., Attendance,
Journal, Purchases, Sales and so on.
Go to Gateway of Tally > Display > Payroll Reports > Statements of Payroll >Payroll
Register
The Payroll Register is displayed as shown:
Figure 10.36 Payroll Register
Press F12: Configure and set the Appearance of Names and the Periodicity to use as
shown.
The Payment Advice will be available only when the Salaries are proc-
essed through Bank Transfer and a Payment voucher is passed for the
salaries payable for a given month/period.
You can also Email or Export Payment Advice in the manner as dis-
cussed in Pay Slip Section.

Payroll Reports
200
The Payroll Register with the above configurations is displayed as shown:
Figure 10.38 Payroll Register - Quarterly
Tally.ERP 9 allows you to drill down to the voucher level from the above display for any kind of
verification. Use the Enter key on the required month/period to drill down to the required level.

Payroll Reports
201
The Payroll Register voucher level screen is displayed as shown:
Figure 10.39 Payroll Voucher Register
You can further drill down to the transaction level, by selecting the required transaction and
pressing Enter.
10.1.7 Employee Pay Head Breakup
An Employee Pay Head Breakup report is a columnar report which displays the Group/Depart-
ment-wise employees’ breakup of a selected earnings or deductions pay head for a specified
month/period. This report also displays the opening balance, debit and credit transactions and the
closing balance for a specified period.
This report is also helpful in tracking loan outstandings and instalments deducted till date or for
any specified period.
Go to Gateway of Tally > Display > Payroll Reports > Statements of Payroll >Employee Pay
Head Breakup
Select the required Pay Head from the List of Pay Heads and press Enter

Payroll Reports
202
The Employee Breakup of Pay Head for Basic pay screen is displayed as shown:
Figure 10.40 Employee Breakup of Pay Head
To drill down to Employee Summary report from the above display,
Select Employee Category and press Enter
Press Alt+F1 to view the detailed report

Payroll Reports
203
The Employee Summary screen is displayed as shown:
Figure 10.41 Employee Summary
To drill down to the Employee Monthly Summary report from the Employee Summary report,
Highlight the required employee and press Enter
You can also Email or Export Employee Breakup of Pay Head Report in
the manner as discussed in Pay Slip Section.

Payroll Reports
204
The Employee Monthly Summary screen is displayed as shown:
Figure 10.42 Employee Monthly Summary
To further drill down to Employee Voucher level screen from the Employee Monthly Summary
report, press Enter on the required month.

Payroll Reports
205
The Employee Summary voucher level screen is displayed as shown:
Figure 10.43 Employee Vouchers Summary
You can further drill down to the transaction level, by selecting the required transaction and
pressing Enter.
The Employee Breakup of Pay Head report can be viewed with additional Pay Heads, by
pressing Alt+C and adding the required Pay Head and by pressing Alt+N for multiple periods.
10.1.8 Pay Head Employee Breakup
A Pay Head Employee Breakup report displays the sum of transactions and closing balance of
the transacted groups for the selected employee.
Go to Gateway of Tally > Display > Payroll Reports > Statements of Payroll >Pay Head
Employee Breakup

Payroll Reports
206
The Employee Selection screen is displayed as shown:
Figure 10.44 Employee Selection
To view the Pay Head breakup,
Select the required Employee from the List of Employees and press Enter
Press Alt+F1 for a detailed view

Payroll Reports
207
The ledger-wise Breakup of Employee screen is displayed as shown:
Figure 10.45 Pay Head Employee Breakup
To further drill down to view the Breakup of Employee report for each ledger from the above
displayed report, select the required ledger and press Enter.

Payroll Reports
208
The Breakup of Employee screen for a selected ledger (Basic Pay) is displayed as shown:
Figure 10.46 Ledger Monthly Summary
You can drill down further to view the Monthly Summary of the selected ledger and the Employee
Voucher report.
The Pay Head Employee Breakup report can be viewed with additional employees, by pressing
Alt+C and adding the required Employee and for multiple periods, by pressing Alt+N.
10.1.9 Attendance Sheet
An Attendance Sheet is a columnar report which displays the details of Attendance/ Production
types with the number of attendance/ production units achieved during a particular month or
period.
Go to Gateway of Tally > Display > Payroll Reports > Attendance Sheet

Payroll Reports
209
The Attendance Sheet is displayed as shown:
Figure 10.47 Attendance Sheet
You may configure the above report with additional details, by pressing F12:Configure and
enabling the following options, as required.
The completed F12: Configuration screen is displayed as shown:
Figure 10.48 F12: Configuration screen

Payroll Reports
210
F12: Configurations for Attendance Sheet:
Remove Zero Entries – Set this option to Yes, to remove Attendance/
Production information with Zero values.
Include Employee Groups & Categories – Set this option to Yes, to
display Category and Group-wise Employee information.
Show Category/Group Total -– Set this option to Yes, to display Cate-
gory and Group-wise Totals.
Include Group Attendance/Production Types – Set this option to Yes
to include Group Attendance/Production Types in Attendance Sheet
report.
Display Attendance/Production Types in Tail Units – Set this option
to Yes, to display the Attendance/Production Types in Tail Units.
Format – Select the Detailed mode to view the payroll information of
employees with their respective categories and groups. Select the Con-
densed mode when only sum totals are required for each category and
group.
Expand all levels in Detailed Format – Set this option to Yes, to
Show Employee Number – Set this option to Yes, to display employee
numbers of employees.
the payroll statement (Alias (Name), Alias only, Name (Alias), Name
only)
Sorting Method – Sort the Attendance Sheet, either by Employee
Number or by the Default method.

Payroll Reports
211
The Attendance Sheet with the above Configurations is displayed as shown:
Figure 10.49 Attendance sheet
10.1.10 Attendance Register
An Attendance Register is a month-wise transactions summary report which displays the number
of attendance vouchers passed during the month. You can append additional information by
inserting a new column with the required voucher type, i.e. Payroll, Journal, Purchases, Sales and
so on.
Go to Gateway of Tally > Display > Payroll Reports > Attendance Register

Payroll Reports
212
The Attendance Register is displayed as shown:
Figure 10.50 Attendance Register
Press F12: Configure and set the Appearance of Names and the Periodicity to use as
shown
The F12:Configuration options in Attendance Register are as displayed below:
Figure 10.51 F12: Configuration for Attendance Register
Tally.ERP 9 allows you to drill down to the voucher register, from the Attendance Register screen
for any kind of verification.

Payroll Reports
213
The Voucher level screen from Attendance Register is displayed as shown:
Figure 10.52 Attendance Voucher Register
You may further drill down to voucher level, by pressing Enter on the required transaction.
10.2 Expat Reports
Expat Reports provide information about regular as well as contractual employees, working
abroad on a short/ long tenure or on assignment. They capture all the relevant information in
respect of passport, visa and contract details along with the date of joining, the issuing country
and the expiry date. In Tally.ERP 9, the following Expat reports are available.
Passport Expiry
Visa Expiry
Contract Expiry
10.2.1 Passport Expiry Report
The Passport Expiry Report provides information on the passport details of employees, such as
passport number, country of Issue, passport expiry date and other details such as the employee's
date of joining and email id.
Go to Gateway of Tally > Display > Payroll Reports > Expat Reports > Passport Expiry

Payroll Reports
214
The Passport Expiry Report is displayed as shown:
Figure 10.53 Passport Expiry Report
Press F12: Configure to configure additional options

Payroll Reports
215
10.2.2 Visa Expiry Report
The Visa Expiry Report provides information on the visa details of employees i.e., visa number,
visa Expiry date and other details such as the employee's date of joining and email id.
Go to Gateway of Tally > Display > Payroll Reports > Expat Reports > Visa Expiry
Show All Employees – Set this option to Yes, to view the passport
details of all employees. It includes information on expired and unex-
pired passport details. If this option is set to No, Show Expiry in days will
be available.
Show Expiry in days – Set this option to Yes, to enter the expiry days.
When Show All Employees and Show Expiry in days options are set
to No, Tally.ERP 9 filters only those employee passport details, which
are nearing the expiry date. If this option is set to Yes, Expiry in next n
days will be available.
Expiry in next n days – Set this option to Yes, to get the passport
expiry details for the next specified number of days. On entering the
number of days, Tally.ERP 9 filters the employee passport details which
are likely to expire within the specified period (number of specified days).
If this option is left blank, the report will denote the current date (last date
of voucher entry).
Show Employee Number – Set this option to Yes, to display the
employee number of employees in the report.
the Passport Expiry Report (Alias (Name), Alias only, Name (Alias),
Name only).
Sorting Method — Sort employee details based on Employee Number,
Passport Expiry Date (Ascending/Descending), or by the default
method.
Show Employee Email Id – Set this option to Yes, to view the email ids
of employees.
Button options in Passport Expiry Report:
F2: Change Period – Allows you to change the period of the report.
F5: Employee Wise – Allows you to display the Employee-wise Pass-
port Expiry report.
F7: Employee Filters – This option (Ctrl+F7) allows you to display the
Passport Expiry Report for a particular Employee Category with the
required Group or Employee.

Payroll Reports
216
The Visa Expiry Report is displayed as shown:
Figure 10.55 Visa Expiry Report
The F12: Configuration and Button Options are the same as shown in
Passport Expiry Report.

Payroll Reports
217
10.2.3 Contract Expiry Report
The Contract Expiry Report provides information on the contract details of employees on assign-
ment/ contract. It displays the contract particulars such as work permit number, contract start and
expiry date along with the employee’s date of joining and the email id.
Go to Gateway of Tally > Display > Payroll Reports > Expat Reports > Contract Expiry
The Contract Expiry Report is displayed as shown:
Figure 10.56 Contract Expiry Report
The F12: Configuration and Button Options are the same as shown in
Passport Expiry Report.

Payroll Reports
218
10.3 Payroll Statutory Reports
In Tally.ERP 9, you can display, print statutory forms and reports for Provident Fund (EPF),
Employee State Insurance (ESI) and Professional Tax (PT) in the prescribed format as required
by the statutes. The following Statutory reports are available in Tally.ERP 9:
Figure 10.57 Payroll Statutory Reports in Tally.ERP 9

Payroll Reports
219
You can view Payroll Statutory reports either from the Statutory Reports menu or Payroll Reports
menu i.e., Gateway of Tally > Display > Statutory Reports > Payroll Reports or Gateway of
Tally > Display > Payroll Reports > Statutory Reports
10.3.1 Provident Fund Reports
As mentioned earlier, the following Provident Fund Reports are available in Tally.ERP 9:
EPF Computation report
Form 5
Form 10
Form 12A
PF Monthly Statement
Form 3A
Form 6A
In this section, we will generate each of the above mentioned forms / report and understand the
purpose and information to be furnished.
i. PF Computation Report
The PF Computation Report provides the summary of Amount Payable and amount paid in
respect of PF for a given period comprising of Employer Contributions, Employee Deductions and
Employer’s Other charges, if any. To view PF Computation Report, follow the steps given below:
Go to Gateway of Tally > Display > Payroll Reports > Statutory Reports > Computation
Press F2 and specify the period as 01-07-2009 to 31-07-2009 and press Enter

Payroll Reports
220
The Payroll Statutory Computation Report is displayed as shown:
Figure 10.58 Payroll Statutory Computation Report
The report, by default displays the summary of Employee’s Provident Fund, Employees’ State
Insurance and Professional Tax. You may however configure to display only details of Provident
Fund.
Press F12: Configure and enable/disable the following options as required
Figure 10.59 F12: Configurations screen
Press Enter

Payroll Reports
221
The PF Computation report will is displayed as shown:
Figure 10.60 PF Computation screen
To view detailed ledger wise information under each contributions / deductions head, press
Alt+F1.

Payroll Reports
222
The detailed Provident Fund Computation Report is displayed as shown:
Figure 10.61 Detailed PF Computation Report
You can further drill down to Employee Breakup of Pay Head report and from there to Employee
Vouchers and so on, by pressing Enter on the required ledger from the above screen.
ii. Form 5
In accordance with the Employees' Provident Funds Scheme,1952 [para 36 (2)(a)], a return is
required to be submitted in Form 5 within 15 days of the following month detailing the list of
Employees qualifying for membership to the Employees’ Provident Fund for the First time during
every month.
Form 5 is a monthly Returns to be submitted with the details of any new employee covered under
EPF. In Tally.ERP 9, you can generate Form 5 in the prescribed format containing the details of
the new joinees in the organisation for the selected month. To generate the PF Form 5 for the
month of June 2009, follow the steps given below:
Go to Gateway of Tally > Display > Payroll Reports > Statutory Reports > Provident Fund >
Form 5
In the Payroll Statutory Print Configuration screen,
Select All Items in the Employee Category field
Select All Items in the Employee / Group field

Payroll Reports
223
Select Account Number as the Sorting Method
Specify 30-06-2009 in the Date field
The completed Payroll Statutory Print Configuration screen is displayed as shown:
Figure 10.62 Payroll Statutory Print Configuration screen
Press Enter to print.

Payroll Reports
224
The printed PF Form 5 is displayed as shown:
Figure 10.63 PF Form 5
In our case study, there are two new employees who have joined during the month of June 2009
and thus Form 5 contains the details of these employees.

Payroll Reports
225
iii. Form 10
In accordance with the Employees' Provident Funds Scheme,1952 [para 36 (2)(a) & (b), a Return
is required to be submitted in Form 10 within 15 days of the following month detailing the list of
members leaving service during the month.
Form 10 is a monthly Return to be submitted with the details of employees leaving the organisa-
tion. In Tally.ERP 9, on resignation or retirement or expulsion of any employee, the date of leaving
is required to be specified in the Employee master of such employee. The Date of Leaving option
in the Employee Master is available in the alteration mode. Form 10 contains the details of
Employees for whom the date of leaving is specified in the Employee Master.
You can generate Form 10 in the prescribed format containing the details of the employees who
have resigned in the selected month. To generate the PF Form 10 for the month of August 2009,
follow the steps given below.
Form 10
In the Payroll Statutory Print Configuration screen
Specify 30-09-2009 in the Date field

Payroll Reports
226
The printed Form 10 is displayed as shown:
Figure 10.65 Printed Form 10

Payroll Reports
227
iv. Form 12A
In accordance with the Employees' Provident Funds Scheme, 1952 [para 36(1)] and the Employ-
ees' Pension Scheme 1995 [para 20(4)] and the Employees' Deposit Linked Insurance Scheme,
1976, a consolidated Statement of dues and remittance is required to be submitted by 25th of the
following month to which the dues relate.
You can generate Form 12A in the prescribed format containing the details of the amount of con-
tribution, amount of contribution remitted and the date of remittance in respect of EPF, Pension
Fund and EDLI Contribution for the selected month. To generate the PF Form 12A for the month
of August 2009, follow the steps given below.
Form 12A
Specify the Name & Address of the Bank
Set Include VPF Account to No
Specify 2 in the Number of Contract Employees field
Press Enter to accept 0 in Number of Rest (Temporary Employees) field
Figure 10.66 Completed Print Configuration screen

Payroll Reports
228
The printed Form 12A is displayed as shown:
Figure 10.67 Printed Form 12A

Payroll Reports
229
v. PF Monthly Statement
The PF Monthly Statement provides a summary of Employee wise monthly PF Employee Deduc-
tions and Employer Contribution amounts. To print the PF Monthly Statement, follow the steps
given below:
Monthly Statement
Figure 10.68 Print Configuration screen
Press Enter to Print.

Payroll Reports
230
The printed PF Monthly Statement for August 2009 is displayed as shown:
Figure 10.69 PF Monthly Statement

Payroll Reports
231
vi. Form 3A
As per the Employees' Provident Funds Scheme,1952 [para 35 & 42] and the Employees'
Pension Scheme 1995 (Para 19), a Form (Member’s Annual Contribution Card) showing month
wise recoveries towards EPF and Pension Fund in respect of a member for one financial year is
required to be furnished by the employer before 30th April of the following year.
Form 3A is a annual contribution card to be furnished for each employee in separate sheets to
EPFO. To print Form 3A, follow the steps given below:
Form 3A
Specify 28-02-2010 in the Date of Printing field
Figure 10.70 Payroll Statutory Print Configuration

Payroll Reports
232
The printed Form 3A for Ajay is displayed as shown:
Figure 10.71 Printed PF Form 3A
The next page will contain the Contribution Card in Form 3A for the next employee.

Payroll Reports
233
vii. Form 6A
As per the Employees' Provident Funds Scheme,1952 [para 43] and the Employees' Pension
Scheme 1975 [para 20], a Form (Consolidated Annual Contribution Statement) providing annual
contributions of each member of the establishment is required to be submitted by 30th April.
Form 6A is a vital form for compiling the annual Provident Fund statement of a subscriber. In
Tally.ERP 9, you can generate Form 6A in the prescribed format. To print Form 6A, follow the
steps given below:
Form 6A
Figure 10.72 Payroll Statutory Print Configuration for PF Form 6A

Payroll Reports
234
The printed Form 6A is displayed as shown:
Figure 10.73 Printed Form 6A - Page 1

Payroll Reports
235
The Page 2 of PF Form 6A is displayed as shown:
Figure 10.74 Printed Form 6A - Page 2

Payroll Reports
236
viii. E-Return for PF Form 3A
Tally.ERP 9 also allows to generate the PF Form 3A in dbf fomat. The dbf format of this form can
be copied to a CD and submitted to the PF department.
To generate the PF Form 3A in dbf format,
E-Return
Press Backspace and specify the details as shown:
Figure 10.75 Exporting Form 3A in dbf format
Press Enter to Export the form in the required format.
10.3.2 Employee’s State Insurance Reports
As mentioned earlier, the following ESI Reports are available in Tally.ERP 9:
ESI Computation Report
Form 3
ESI Monthly Statement
Form 5
Form 6
In this section, we will generate each of the above forms / report and understand the purpose and
information to be furnished.
The Out File Name can be changed with the .dbf extension to by default
export the form in the required format. Or the Form can be exported in the
Excel Format and renamed by changing the extension as .dfb.

Payroll Reports
237
i. ESI Computation Report
The ESI Computation Report provides the summary of Amount Payable and amount paid in
respect of ESI for given period comprising of Employer Contributions and Employee Deductions.
To view ESI Computation Report, follow the steps given below:
Go to Gateway of Tally > Display > Payroll Reports > Statutory Reports > Computation
Press F2 and specify the period as 01-07-2009 to 31-07-2009 and press Enter
Figure 10.76 Payroll Computation report
The report, by default displays summary of Employee’s Provident Fund, Employee’s State
Insurance and Professional Tax, you may however configure to display only details of Employee
State Insurance.
Press F12: Configure and enable/disable the following options as required
Press Enter

Payroll Reports
238
The ESI Computation report is displayed as shown:
Figure 10.78 ESI Computation report
To view the detailed ledger wise information under each contributions / deductions head, press
Alt+F1.

Payroll Reports
239
The detailed Employee State Insurance Computation Report is displayed as shown:
Figure 10.79 Detailed ESI Computation report
You can further drill down to Employee Breakup of Pay Head report and from there to Employee
Vouchers and so on, by pressing Enter on the required ledger from the above screen.
ii. ESI Form 3
As per Regulation 14, a declaration form in Form 3 is required to be filed for every Half Yearly
stating the list of Employees whose remuneration is not exceeding Rs. 10,000/- per month. To
generate ESI Form 3, follow the steps given below:
Go to Gateway of Tally > Display > Payroll Reports > Statutory Reports > Employee State
Insurance > Form 3
Select All Items in the field Gender
Type Bangalore in the Place field

Payroll Reports
240
Type the Designation details of the person submitting the declaration form
Figure 10.80 Payroll Statutory Print Configuration for ESI Form 3

Payroll Reports
241
The printed Form 3 (Return of Declaration) is displayed as shown:
Figure 10.81 Printed Form 3

Payroll Reports
242
iii. ESI Monthly Statement
The ESI Monthly Statement provides a summary of Employee wise monthly ESI Employee
Deductions and Employer Contribution amount. To print ESI Monthly Statement, follow the steps
given below:
Insurance > Monthly Statement
The completed Payroll Configuration Print screen is displayed as shown:

Payroll Reports
243
The printed ESI Monthly Statement for August 2009 is displayed as shown:
Figure 10.83 ESI Monthly Statement
iv. Form 5
As per Regulation 26, a Return of Contribution in Form 5 is required to be submitted to the appro-
priate Branch Office within 42 days of the expiry of the contribution period (i.e, 12th May or
November 11th of each year). Such return of contribution should be prepared in quadruplicate
and submitted separately for the main Code Number and each sub-code number.

Payroll Reports
244
The employer may make compliance from the parent unit and submit only one return in respect of
all the branches or may make compliance through their Branch Offices/ Sales Offices separately
in the Regions where such offices are located.
Insurance > Form 5
Specify Bangalore in the Place Field
Type the name of the Signatory in the Authorised Signatory Name field
Type the Designation details of the signing authority
In the Residential Address field provide the Home Address of Authorised Signatory
The completed Payroll Statutory Print Configuration screen for ESI Monthly Statement is
displayed as shown:

Payroll Reports
245
The printed From 5 is displayed as shown:
Figure 10.85 Printed Form 5 - Page 1

Payroll Reports
246
The Page 2 of Form 5 (includes the CA Form also) is displayed as shown:

Payroll Reports
247
The Page 3 of Form 5 is displayed as shown:
Figure 10.87 ESI Form 5 - Page 3

Payroll Reports
248
v. ESI Form 6
As per Regulation 32, a register of Employees covered under Employees State Insurance
Scheme, containing information regarding the Insurance No., dispensary, other occupational
details, Employer’s Share and month wise (under that particular Half Year) ESI details (i.e., Gross
wages, Number of working days and ESI Contribution for each employee) should be furnished. To
generate Form 6, follow the steps given below:
Insurance > Form 6
Type 01-04-2009 in the From field
Type 30-09-2009 in the To field
Figure 10.88 Payroll Statutory Print Configuration for ESI Form 6

Payroll Reports
249
The printed Form 6 is displayed as shown:

Payroll Reports
250

Payroll Reports
251

Payroll Reports
252
10.3.3 Professional Tax Reports
As discussed earlier, Professional Tax is applicable to those individuals or professionals in India
who are involved in any profession or trade. The state government of each state governs and
administers the levy and collection of Professional Tax in the respective State. The state is
empowered with the responsibility of structuring as well as formulating the professional tax criteria
for the respective state. Professional tax is charged on the incomes of Individuals, profits of
business or gains in vocations as per the list II of the Indian Constitution.
In India, the professional tax slabs vary from state to state and some of the states have formulated
different professional tax slabs for men, women and the senior citizens of the respective states.
The rates depend upon the profession, years in the profession and the amount of income or
turnover and so on.
In Tally.ERP 9, the Professional Tax Report is generated based on the Slab Rates defined in the
Professional Tax Ledger and it captures the amount of Professional Tax deducted under each
slab rate.
i. Professional Tax Computation Report
The Professional Tax Computation Report provides the summary of Amount deducted as Profes-
sional Tax from the Earnings of the Employees exceeding the prescribed threshold limits, in
accordance with the Slab rates applicable for the particular state.
Go to Gateway of Tally > Display > Payroll Reports > Statutory Reports > Professional Tax >
Computation Report
From the List of Ledgers drop down, select Professional Tax and press Enter, the Pay-
roll Statutory Print Configuration screen appears
Type Bangalore in the Place field

Payroll Reports
253

Payroll Reports
254
The printed Professional Tax Computation report for the month of August 2009 will appear as
shown:
Figure 10.93 Printed PT Computation Report

Payroll Reports
255
ii. Professional Tax Statement
The Professional Tax Statement provides the summary of Employee wise Gross Wages paid, No.
of Working Days and the amount of Professional Tax deducted during the selected period. To
generate the Professional Tax Statement for a month,
Go to Gateway of Tally > Display > Payroll Reports > Statutory Reports > Professional Tax >
Statement
From the List of Ledgers drop down, select Professional Tax and press Enter, the Pay-
roll Statutory Print Configuration screen appears
Select Employee Name as the Sorting Method
The completed Payroll Statutory Print Configuration screen will appear as shown:

Payroll Reports
256
The printed Professional Tax Statement for August 2009 is displayed as shown:
Figure 10.95 Printed Professional Tax Statement

Payroll Reports
257
10.3.4 Gratuity Report
The Gratuity Report displays the provisional liability of an employer towards his employee in
respect of gratuity payable at the time of cessation of employment either by resignation, death,
retirement or termination.
The Gratuity Summary Report displays the gratuity amount payable in accordance with the pay
components and formulae defined in the ledger master, as discussed earlier. In Tally.ERP 9, the
Gratuity amount is calculated proportionately for eligible days in a year to the extent of completed
months of service.
You can view the Gratuity Report either from Statutory Reports menu or Payroll Reports menu i.e.,
Gateway of Tally > Display > Payroll Reports > Statutory Reports or Gateway of Tally >
Display > Statutory Reports > Payroll Reports.
Go to Gateway of Tally > Display > Payroll Reports > Statutory Reports > Gratuity Report
You can view PT Computation Report from Gateway of Tally > Display >
Payroll Reports > Statutory Reports > Computation menu, detailing Pro-
fessional Tax collected and paid during a given period in the manner as
discussed in Provident Fund Computation Report section.

Payroll Reports
258
The Gratuity Report for the Employees eligible for Gratuity is displayed as shown:
Figure 10.96 Gratuity Summary Report
The above report displays the Gratuity Amount computed for each month for each Employee.
In order to ascertain the Gratuity payable amount, set Use for Gratuity to
Yes in the Pay Head master (i.e. Basic Pay, Dearness Allowance etc.)

Payroll Reports
259
The above report displays the details of all employees along with the Date of Birth, Date of Joining
and the Gratuity Eligible Salary, besides commenting on the total Gratuity liability as on date.
Press F12: Configure to configure for additional options
Tally.ERP 9 allows you to drill down to the Gratuity Details report from the above display.
Select the required employee and press Enter
Button Options in the Gratuity Report:
F5: Employee Wise – Allows you to display the Employee-wise Gratuity
report.
F6: Till Date – Allows to actual gratuity payable for each employee. The
Gratuity Amount will be displayed only for those Employees who have
completed the eligibility duration in the organisation.
F7: Employee Filters – This option (Ctrl+F7) allows you to display the
Gratuity report for a particular Employee Category with the required
Group or Employee.

Payroll Reports
260
The Gratuity Details screen is displayed as shown:
Figure 10.98 Gratuity Details Report
Once the employee is deactivated (i.e., when the date of leaving is filled in the
Employee master), Tally.ERP 9 stops computing Gratuity for the deactivated
employee. If the tenure of service of such an employee falls below the eligible
slab for gratuity calculation, he/she will not be entitled for any gratuity amount.
However, in cases where the tenure of service is spread over more than one
eligible slab(s), he/she will be entitled to the sum total of all the slabs.
The above report displays the detailed Gratuity computation for all the slabs entered during the
Gratuity Pay Head Creation.

Implementation of payroll in tally erp 9

More Related Content

What's hot (20)

Viewers also liked (16)

Similar to Implementation of payroll in tally erp 9 (20)

More from Ashish Sahu (20)

Recently uploaded (20)

Implementation of payroll in tally erp 9