Inertia dynamics cb_enclosed184_specsheet
0 likes144 views
This document provides specifications for the CBP-184-125-E clutch-brake module. It lists the model number, voltage, weight, torque ratings, and dimensions. Replacement parts for the module are shown in an exploded diagram view with part numbers. Ordering and contact information is also provided for the manufacturer.
Inertia dynamics cb_enclosed184_specsheet
- 1. Clutch-Brake Modules Enclosed Housing Clutch-Brake Module Model No. CBP-184-125-E 3.25 24 Volts 307194-159 90 Volts 307194-160 To order use number shown in Table above: example – for 90 volt CBP-184-125-E, order 307194-160. For controls, see Section K. 7.25 B.C. 9.50 7.75 2.25 .18 2.60 1/2-13 1/4 x 1/8 Keyway 7.25 B.C. .26 1.75 1/2-13 8.501 8.504 Pilot 1-1/8" 1-1/8" 8.499 8.497 Pilot 1/2 NPT 1/4 x 1/8 Keyway Technical Data and Torque (In. Lb.) Static Max. Coil * Rated RPM Wt. Torque Speed Voltage Current Model No. Lbs. in. lb. RPM vdc amps 0 300 600 900 1200 1500 1800 2400 3000 3600 CBP-184-125-E 49 1500 3600 90 .46 1500 1320 1140 1020 960 900 804 636 516 420 Refer to Section M for torque and heat dissipation curves. * Rated Current for 90v Factory Assembled and Tested Spline Drive 182TC/184TC Flange Models CBP–184-125-E B-16 Sold Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Enclosed Housing Clutch-Brake Modules – Replacement Parts 13 13 14 15 16 B 20 4 ✽ 5 1 2 3 17 18 19 11 12 19 6 7 8 3 6 9 A 10 24 25 15 Replacement Parts Model No. Clutch-Brake Module Item Qty. Description CBP-184-125-E 1 2 Key 326770 2 1 Retaining Ring RY-20191 3 1 Retaining Ring RY-20114 4 4 Tie Bolt 650378 5 2 Assembly Screw RY-20193 6 2 Bearing RY-20115 7 1 Housing 650377-1 8 1 Bearing Spacers 326699 9 1 Washer 326769-2 10 1 Splined Shaft 650340-20 11 1 Cap Screw DY-10278 12 1 Wire Clip 36-42-3 13 2 Armature 307382-1 14 1 Rotor 307820-11 15 2 Setscrew – 16 1 Rotor Hub 307751-8 17 1 Retaining Ring 327064 18 1 Bearing RY-20210 19 2 Retaining DY-15117 20 1 End Cap 650380-3 21 8 Screw (not shown) DY-644 22 12 Washer (not shown) DY-4498 23 6 Screw (not shown) – 24 1 Brake Shaft – 25 1 Brake Hub – 26 1 Retaining Ring (not shown) – A 1 Brake Field 24 Volts 307353-4 90 Volts 307354-4 B 1 Clutch Field 24 Volts 307713-5 90 Volts 307714-5 ✽ ✽ Current design armatures are solid. ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com B-17 Sold Serviced By: