Inertia dynamics sheaveclutch307_specsheet
0 likes108 views
This document provides technical specifications and ordering information for model 307 sheave clutches. It lists torque and speed ratings for the 307 model at different voltages and currents. It also provides a diagram and part numbers for replacement parts for the 307 sheave clutch, including the armature assembly, rotor assembly, bearings, retaining rings, and field components. Customers are instructed to order units using the model numbers listed in the table and to contact the manufacturer for controls information.
Inertia dynamics sheaveclutch307_specsheet
- 1. D-6 Bore "A" Keyway 1" .250 / .251 1-1/8" .250 / .251 1-1/4" .250 / .251 *1-3/8" .312 / .313 .810 *Special Key Furnished 3.10 Technical Data and Torque (In. Lb.) Sheave Clutch Models 307 Static Max. Coil * Rated RPM Factory Assembled and Tested Bearing Mounted Spline Drive Model Wt. Torque Speed Voltage Current No. Lbs. in. lb. RPM vdc amps 0 300 600 900 1200 1500 1800 2400 3000 3600 307 15.4 1500 3600 90 .48 1500 1320 1140 1020 960 900 804 636 516 420 Refer to Section M for torque and heat dissipation curves. * Rated Current for 90v. Model No. 307 24 Volts, 1 Bore 307141-19 24 Volts, 1-1/8 Bore 307141-23 24 Volts, 1-1/4 Bore 307141-27 24 Volts, 1-3/8 Bore 307141-31 90 Volts, 1 Bore 307141-20 90 Volts, 1-1/8 Bore 307141-24 90 Volts, 1-1/4 Bore 307141-28 90 Volts, 1-3/8 Bore 307141-32 To order, use number shown in Table above. For controls, see Section K. Sold Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. D-7 Replacement Parts Item Qty. Description Part No. Item Qty. Description Part No. 1 1 Retaining Ring (External) RY-20207 2 1 Armature Assembly 307382-1 3 4 Screw RY-20110 4 1 Bearing Retainer 326686 5 1 Bearing DY-6953 6 1 Retaining Ring (External) RY-20109 7 1 Rotor Assembly 307820-11 8 1 Bearing Hub 307752 9 1 Key 326688 10 1 Needle Bearing RY-20107 11 1 Retaining Ring (Internal) RY-20108 12 2 Retaining Ring (Internal) RY-20042 13 1 Bearing RY-20047 14 1 Lock Collar 326685 14-A 2 Set Screw DY-12665 15 1 Clutch Accessory 326690 16 1 Drive Sleeve 1 Bore 307821-9 1-1/8 Bore 307821-10 1-1/4 Bore 307821-11 1-3/8 Bore 307821-12 17 1 Field 24 Volts 307733-1 90 Volts 307734-1 18 1 Retaining Ring (External) RY-20037 19 1 Felt Washer 326769-2 1 2 16 4 19 5 6 7 8 10 11 9 12 13 12 17 18 15 14A 14 3 Sheave Clutch – Replacement Parts ✽ ✽ Current design armatures are solid. Sold Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com