Inertia dynamics cb_enclosed215_specsheet
0 likes117 views
This document provides specifications and part numbers for a clutch-brake module. It includes dimensions, torque and speed ratings, and part lists for the CBP-215-125-E model. Replacement parts are identified by item number, quantity, description and part number. The module can be ordered using the part numbers provided for either 24V or 90V operation.
Inertia dynamics cb_enclosed215_specsheet
- 1. Clutch-Brake Modules Enclosed Housing 7.25 B.C. 9.50 Clutch-Brake Module 7.75 3.25 2.25 .18 3.10 1/2-13 5/16 x 5/32 Keyway 7.25 B.C. .26 2.31 1/2-13 8.501 8.504 Pilot 1-3/8" 1-3/8" 8.499 8.497 Pilot 1/2 NPT 5/16 x 5/32 Keyway Technical Data and Torque (In. Lb.) Static Max. Coil * Rated RPM Wt. Torque Speed Voltage Current Model No. Lbs. in. lb. RPM vdc amps 0 300 600 900 1200 1500 1800 2400 3000 3600 CBP-215-125-E 49 1500 3600 90 .46 1500 1320 1140 1020 960 900 804 636 516 420 Refer to Section M for torque and heat dissipation curves. * Rated Current for 90v Factory Assembled and Tested Spline Drive 213TC/215TC Flange Model CBP–215-125-E Model No. CBP-215-125-E 24 Volts 307194-163 90 Volts 307194-164 To order use number shown in table above: example – for 90 volt CBP-215-125-E, order 307194-164. For controls, see Section K. B-18 Sold Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Enclosed Housing Clutch-Brake Modules – Replacement Parts 13 13 14 15 16 B 20 4 ✽ 5 ✽ 1 2 3 17 18 19 11 12 19 6 7 8 3 6 9 A 10 24 25 15 Replacement Parts Model No. Clutch-Brake Module Item Qty. Description CBP-215-125-E 1 2 Key 326771 2 1 Retaining Ring RY-20191 3 1 Retaining Ring RY-20114 4 4 Tie Bolt 650378 5 2 Assembly Screw RY-20193 6 2 Bearing RY-20115 7 1 Housing 650377-1 8 1 Bearing Spacer 326699 9 1 Washer 326769-2 10 1 Splined Shaft 650340-21 11 1 Cap Screw DY-10278 12 1 Wire Clip 36-42-3 13 2 Armature 307382-1 14 1 Rotor 307820-11 15 2 Setscrew – 16 1 Rotor Hub 307751-9 17 1 Retaining Ring 327064 18 1 Bearing RY-20210 19 2 Retaining Ring DY-15117 20 1 End Cap 650380-3 21 8 Screw DY-644 22 12 Washer DY-4498 23 6 Screw (not shown) – 24 1 Brake Shaft – 25 1 Brake Hub – 26 1 Retaining Ring (not shown) – A 1 Brake Field 24 Volts 307353-4 90 Volts 307354-4 B 1 Clutch Field 24 Volts 307713-5 90 Volts 307714-5 ✽ Current design armatures are solid. ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com B-19 Sold Serviced By: