Inertia dynamics flangemtbk305p_specssheet
0 likes71 views
This document provides technical specifications and ordering information for a Model 305 flange mounted brake. It includes torque and speed ratings for the brake at different voltages. Dimensions are provided for inside and outside mounting configurations. The document lists the individual parts that make up the brake and their part numbers, and provides ordering instructions. Customer mounting requirements of 0.006 inch concentricity and perpendicularity are also specified.
Inertia dynamics flangemtbk305p_specssheet
- 1. H-6 Inside Mount 1.19 Outside Mount 1.26 Technical Data and Torque (In. Lb.) Inside Mount 2.94 Outside Mount 3.01 Static Max. Coil * Rated RPM Model Wt. Torque Speed Voltage Current No. Lbs. in. lb. RPM vdc amps 0 300 600 900 1200 1500 1800 2400 3000 3600 305 3.5 684 3600 90 .41 684 624 564 516 468 420 384 324 288 252 * Rated current at 90v. Refer to Section M for torque and heat dissipation curves. Customer must maintain: 1. Concentricity between mounting fl ange and shaft within .006. 2. Perpendicularity between mounting surface and shaft within .006. Order Parts for Assembly No. FC305050 and FC305051 FC305050 FC305051 Armature Hub Armature Plate Magnet (1215) Taper Magnet Assembly Assembly Accessory Bushing Inside Mounted Outside Mounted 24 Volts 305450 305381 326143 326058-XX 305343 305353 90 Volts 305450 305381 326143 326058-XX 305344 305354 To order, specify: 1, Armature Hub For controls, see Section K. 1, Armature Plate Assembly 1, Magnet Accessory 1, Taper Bushing (1215) of required Bore size 1, Magnet of required Voltage for either Inside Mount or Outside Mount Flange Mounted Pin Drive Model 305 Bushing 1215 Bore ‘E’ Keyway Part No. 1/2 .500 .125 x .062 326058 - 1 9/16 .562 .125 x .062 326058 - 2 5/8 .625 .187 x .093 326058 - 3 11/16 .687 .187 x .093 326058 - 4 3/4 .750 .187 x .093 326058 - 5 13/16 .812 .187 x .093 326058 - 6 7/8 .875 .187 x .093 326058 - 7 15/16 .937 .250 x .125 326058 - 8 1 1.000 .250 x .125 326058 - 9 1-1/16 1.062 .250 x .125 326058 - 10 1-1/8 1.125 .250 x .125 326058 - 11 1-3/16 1.187 .250 x .125 326058 - 12 1-1/4 1.250 .250 x .125 326058 - 13 Flange Mounted Brake Sold Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. H-7 2 Replacement Parts 5 1 Item Qty. Description Part No. 1 1 Armature Hub Assembly 305450 2 1 Armature Plate Assembly 305381 3 1 Magnet Accessory 326143 4 1 Magnet 24 Volts, inside mounted 305343 90 Volts, inside mounted 305344 24 Volts, outside mounted 305353 90 Volts, outside mounted 305354 5 1 Taper Bushing (1215) 326058-XX Outside Mount 4 4 Inside Mount 3 Flange Mounted Brake ✽ ✽ Current design armatures are solid. Sold Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com