Inertia dynamics pc1225bhd_specsheet
0 likes63 views
This document provides specifications for a Clutch PC-1225 Heavy Duty, including its static torque of 465 lb-ft, maximum speed of 3,000 rpm, and standard voltage options of 6, 24, or 90 VDC. It lists the parts included in the clutch assembly and their corresponding part numbers. Installation and ordering instructions are also provided.
Inertia dynamics pc1225bhd_specsheet
- 1. Clutch PC-1225 Heavy Duty 84 3.468 Shaft Size .937 – 3.000 Static Torque 465 lb.ft. Maximum Speed 3,000 rpm Standard Voltage D.C. 6, 24, 90 ARMATURE VIEW 1/2-14 NPSM Am. std. straight pipe tap. COLLECTOR RING VIEW Customer Shall Maintain: 1. Splined hub pilot diameter to be concentric with splined armature center of rotation within .010 T.I.R. 1.500 4.313 4.311 Pilot Dia. 5.750 .093 12.625 Running Dia. Max. Max. Length of Customer Pilot 13.140 .171 Max. .062 .125 .718 Max. .062 Min. Running Clearance 3/8-16 UNC-2A (Left Hand Magnet Hub Shown) 1.640 2.187 4.875 Max. .562 3.156 7.781 Dia. 3.00 .397/.388 Dia. (8) holes equally spaced on 3.625 dia. Mounting holes are within .003 of true position relative to pilot diameter. See page 252 for details on Bushings. All dimensions are nominal unless otherwise noted. Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. 3.062 dia. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Clutch PC-1225 Heavy Duty 85 Drawing I-25603 How to Order: 1. Specify Voltage for Item 5. 2. Specify Bore Size for Item 7. 3. Specify left hand or right hand hub for Item 6. 4. See Controls Section. Example: PC-1225 Clutch per I-25603 - 90 Volt, L.H. hub, 1" Bore These units meet the standards of UL508 and are listed under guide card #NMTR2, file #59164. These units are CSA certified under file #LR11543. 1 (Shipped Assembled) 1-5 3 2 1-1 1-2 1-3 5-1 4 5 7 8-1 8 6-1 6 (Shipped Assembled) 6-2 1-4 Item Description Part Number Qty. 1 Armature & Splined Adapter Assembly 5323-111-001 1 1-1 Armature 5323-111-034 1 1-2 Splined Armature Adapter 104-0010 1 1-3 Autogap Accessory 5323-101-002 1 Autogap Spring 808-0044 1 Retainer Ring 748-0370 1 1-4 Button Head Screw 797-0281 4 1-5 Locknut 661-0005 4 2 Mounting Accessory 5202-101-001 1 3 Splined Hub 540-0148 1 4 Mounting Accessory 5321-101-001 1 5 Magnet 1 6 Volt 5303-631-005 24 Volt 5303-631-007 90 Volt 5303-631-008 †90 Volt LK Facing 5303-631-001 5-1 Terminal Accessory 5311-101-001 6 Magnet Hub Assembly 1 Right Hand 5303-541-002 Left Hand (shown) 5303-541-001 Item Description Part Number Qty. 6-1 Collector Ring 5301-749-001 1 6-2 Collector Ring Accessory 5303-101-004 1 7 Bushing, Taperlock* 180-0262 to 180-0295 1 8 Brushholder 5300-178-001 1 8-1 Brush 176-0001 4 *See page 252 for specific part numbers. Refer to Service Manual P-206. †Optional LK facing available. For more information, see page 232. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com