Inertia dynamics sf1000bhd_specsheet
0 likes187 views
This document provides specifications for the Warner Electric SF-1000 Bearing Mounted Heavy Duty Clutch. The clutch has a shaft size range of 0.5-2 inches, a static torque of 240 lb-ft, and can operate at speeds up to 2,500 rpm. It uses DC voltages of 6, 24, or 90. Dimensions and part numbers are provided for the various components. Maintenance requirements and ordering information are also listed.
Inertia dynamics sf1000bhd_specsheet
- 1. Clutch Heavy Duty SF-1000 Bearing Mounted .875 .343 .397/.388 dia. 3 holes (hub) equally spaced on 3.187 dia. and within .003 of true position relation to 4.001/3.999 50 .437 Shaft Size .500 – 2.000 Static Torque 240 lb.ft. Maximum Speed 2,500 rpm Standard Voltage D.C. 6, 24, 90 .397/.388 dia. 3 holes (hub) equally spaced on 3.187 dia. and within .003 of true position relation to 4.001/3.999 pilot dia. ARMATURE VIEW 3.750 FIELD VIEW 2.562 pilot dia. Removable plug in ends of 1/2" conduit. 7.687 See page 252 for details on Bushings. 45° 6.125 Customer Shall Maintain: 1. Armature hub pilot diameter to be concentric with field and rotor mounting shaft within .010 T.I.R. 1.375 1.250 .843 Dia. .125 1.375 .187 6.531 3/8-16 UNF-2A 1.421 .093 Max. Length of Customer Pilot. 4.281 Max. .500 .062 2.062 10.328 Max. Dia. 6.000 Dia. 4.001 3.999 Dia. 2.562 Dia. 1.546 All dimensions are nominal unless otherwise noted. Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. ® U L Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Heavy Duty Clutch SF-1000 Bearing Mounted 51 4-9 4-10 How to Order: 1. Specify Bore Size for Item 5. 2. Specify Voltage for Item 4. 3. See Controls Section. Example: SF-1000 Clutch per I-25597 - 90 Volt, 1" Bore These units, when used in conjunction with the correct Warner Electric conduit box, meet the standards of UL508 and are listed under guide card #NMTR, file #59164. These units are CSA certified under file #LR11543. Item Description Part Number Qty. 1 Splined Hub 540-0147 1 2 Accessory, Mounting 5202-101-001 1 3 Armature & Adapter Assembly 5202-111-001 1 3-1 Armature 5322-111-036 1 3-2 Splined Adapter 104-0009 1 3-3 Autogap Accessory 5322-101-004 1 3-4 Screw 797-0341 3 3-5 Locknut 661-0004 3 3-6 Spacer 748-0333 3 4 Field & Rotor Assembly 1 6 Volt 5202-452-012 24 Volt 5202-452-014 90 Volt 5202-452-015 4-1 Rotor 1 Standard Friction Material 5202-751-003 †Optional LK Facing 5202-751-007 4-2 Field & Bearing Assembly 1 6 Volt 5202-451-040 24 Volt 5202-451-042 90 Volt 5202-451-043 4-3 Retainer Ring 748-0116 1 Item Description Part Number Qty. 4-4 Ball Bearing 166-1046 1 4-5 Retainer Ring 748-0582 1 4-6 Rotor Hub 540-1300 1 4-7 Buttonhead Capscrew 797-1261 6 4-8 Ring Adapter 748-1047 1 4-9 Lockwasher 950-0359 6 4-10 Socket Head Capscrew 797-0422 6 5 Bushing* 180-0155 to 180-0179 1 6 Conduit Box 5200-101-012 1 1 2 3 (Shipped Assembled) 3-4 3-2 3-3 3-6 3-5 5 4-6 4-1 4-7 4-8 4-2 4 (Shipped Assembled) 6 4-3 4-4 4-5 3-1 Drawing I-25597 *See page 252 for specific part numbers. Refer to Service Manual P-215. †Optional LK facing available. For more information, see page 232. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com