Inertia dynamics f400f_specsheet
0 likes111 views
The document provides specifications for an SF-400 flange mounted clutch, including dimensions for bore and keyway sizes on the armature and rotor. It lists requirements for the customer to maintain squareness and concentricity of the field mounting face and pilot diameter. The document also provides torque rating, maximum speed, voltage options, and part numbers for ordering.
Inertia dynamics f400f_specsheet
- 1. Clutch SF-400 Flange Mounted 45° Customer Shall Maintain: 1. Squareness of field mounting face with shaft within .003 T.I.R. measured at pilot diameter. 2. Concentricity of field mounting pilot diameter with rotor mounting shaft within .003 T.I.R. *3. Customer shall maintain dimension as noted. 26 1.546 1.312 Bore and Keyway Dimensions 1/4-20 UNC- 3A Armature Keyway Rotor Keyway Bore Dia. Bore Dia. .5000/.4995 .312 x .156 .501/.500 .125 x.062 .6250/.6245 x 1.25 .626/.625 .7500/.7495 .751/.750 .187 x .093 Static Torque 270 lb.in. Maximum Speed 4,500 rpm Standard Voltage D.C. 6, 24, 90 ARMATURE VIEW FIELD VIEW For Bore & Keyway sizes see chart below. Removable plug in ends for 1/2" conduit. .296/.280 dia. (4) holes equally spaced on 5.000 dia. Mounting holes are within .010 of true position relative to pilot diameter. 5.625 5.623 Pilot Dia. 4.250 Sq. 3.750 4.687 Max. 1.875 1.873 Pilot Dia. 4.234 Max. Dia. 1.376 1.375 Dia. .875 Dia. .328 Max. 1.500 .015 When New .192/.182 .093 .250 .062 1.468 Min. 2.125 3.546 Max. 1.125 .609 Max. .082 .042 .937 3.562 For Bore & Keyway sizes see chart below. ® U L * All dimensions are nominal unless otherwise noted. Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. SF series Clutch SF-400 Flange Mounted 27 1 3 2 4 5 5-1 6 7 Drawing I-25695 Item Description Part Number Qty. 1 Armature Hub 1 1/2" Bore 5125-541-002 5/8" Bore 5125-541-003 3/4" Bore 5125-541-004 2 Armature 5125-111-001 1 3 Release Spring 5104-101-003 1 4 Rotor 1 1/2" Bore 5104-751-033 5/8" Bore 5104-751-034 3/4" Bore 5104-751-035 5 Field 1 6 Volt 5104-451-032 24 Volt 5104-451-033 90 Volt 5104-451-034 5-1 Terminal Accessory 5103-101-002 1 6 Conduit Box 5200-101-010 1 7 Mounting Accessory 5104-101-002 1 How to Order: 1. Specify Bore Size for Items 1 and 4. 2. Specify Voltage for Item 5. 3. See Controls Section. Example: SF-400 Clutch per I-25695 - 90 Volt 3/4" Armature Hub Bore 3/4" Rotor Bore These units, when used in conjunction with the correct Warner Electric conduit box, meet the standards set of UL508 and are listed under guide card #NMTR2, file #59164. These units are CSA certified under file #LR11543 Refer to Service Manual P-200. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com