Inertia dynamics sfc825b_specsheet
0 likes135 views
This document provides details on an SFC-825 bearing mounted clutch coupling, including dimensions, specifications, and a list of parts. It specifies that bushings and conduit boxes are detailed on other pages. The customer must maintain concentricity of shafts within 0.006 inches and angular alignment within 0.5 degrees.
Inertia dynamics sfc825b_specsheet
- 1. Clutch Coupling SFC-825 Bearing Mounted See page 252 for details on Bushings. Customer Shall Maintain: 1. Armature mounting shaft concentric with field and rotor mounting shaft within .006 T.I.R. 2. Angular alignment of shafts within 1/2 degree. 116 ARMATURE VIEW FIELD VIEW 5.656 1.546 .984 4.250 Dia. 1.250 2.500 Dia. .156 1.250 1.765 .562 1.296 1.656 8.656 Max. Dia. Reverse Mounting .187 .062 4.468 Max. 4.562 Max. Armature Shaft .500 – 1.500 Rotor Shaft .500 – 1.500 Static Torque 150 lb. ft. Maximum Speed 3,600 rpm Standard Voltage D.C. 6, 24, 90 Removable plug in ends for 1/2" conduit. 45° .343 6.812 .350/.342 See page 252 for details on Bushings. 3.750 .875 5.000 ® U L All dimensions are nominal unless otherwise noted. Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. 2 1 3 4-1 4-2 4-3 4 (Shipped Assembled) 4-4 4-6 4-5 1 5-1 5-2 5-3 SFC-825 Bearing Mounted 6 Clutch Coupling 5-4 5-5 5 (Shipped Assembled) 117 Drawing I-25574 How to Order: 1. Specify Bore Size for Item 1 (both shafts). 2. Specify Voltage for Item 5. 3. See Controls Section. Example: SFC-825 Clutch Coupling per I-25574 - 90 Volt, 1" Bore These units, when used in conjunction with the correct Warner Electric conduit box, meet the standards of UL508 and are listed under guide card #NMTR, file #59164. These units are CSA certified under file #LR11543. Item Description Part Number Qty. 1 Bushing* 2 1/2" to 1-1/2" Bore 180-0002 to 180-0018 2 Retainer Ring 748-0006 1 3 Splined Hub 540-0057 1 4 Armature & Splined Adapter 5201-111-001 1 4-1 Capscrew 797-0341 3 4-2 Splined Adapter 104-0008 1 4-3 Autogap Accessory 5321-101-006 1 4-4 Spacer 748-0333 3 4-5 Armature 5321-111-022 1 4-6 Locknut 661-0004 3 5 Field & Rotor Assembly 1 6 Volt 5201-452-002 24 Volt 5201-452-004 90 Volt 5201-452-006 5-1 Rotor 1 Standard Friction Material 5201-751-008 5-2 Mounting Accessory 5201-101-005 1 5-3 Field 1 6 Volt 5201-451-054 24 Volt 5201-451-056 90 Volt 5201-451-057 Item Description Part Number Qty. 5-4 Retainer Ring 748-0111 1 5-5 Retainer Ring 748-0016 1 6 Conduit Box 5200-101-012 1 *See page 252 for specific part numbers. Refer to Service Manual P-207. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com