Inertia dynamics pc500b_specsheet
0 likes93 views
This document provides specifications for a PC-500 clutch, including a shaft size range of 0.500-1.250 inches, a static torque of 40 lb-ft, and a maximum speed of 5,400 rpm. It can operate on standard voltages of 6, 24, or 90 VDC. Dimensions and part numbers for components like the armature, magnet, bushings, and terminals are given. Instructions for ordering and a diagram of the assembly are also included.
Inertia dynamics pc500b_specsheet
- 1. 72 Shaft Size .500 – 1.250 Static Torque 40 lb.ft. Maximum Speed 5,400 rpm Standard Voltage D.C. 6, 24, 90 Clutch PC-500 ARMATURE VIEW MAGNET VIEW Customer Shall Maintain: 1. Armature mounting to be concentric with magnet hub assembly within .006 T.I.R. .171 Max. 4 1.50 Max. .968 .625 .062 When New 5.937 Max. Dia. 5.062 Dia. 3.468 .453 1.187 1.375 3.187 See page 230 for details on Drive Pin mountings. See page 252 for details on Bushings. 1/2-14 NPSM Am. std. straight pipe tap. All dimensions are nominal unless otherwise noted. Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Clutch PC-500 73 4 4-1 7 3 1-2 1-1 2-1 2 1 (Shipped Assembled) 5 6 How to Order: 1. Specify Bore Size for Item 3. 2. Specify Voltage for Item 4. 3. See Controls Section. Example: PC-500 Clutch per I-25716 - 90 Volt 3/4" Bore These units, when used in conjunction with the correct Warner Electric conduit box, meet the standards set of UL508 and are listed under guide card #NMTR2, file #59164. These units are CSA certified under file #LR11543. Item Description Part Number Qty. 1 Magnet Hub 5300-541-001 1 1-1 Collector Ring 5300-749-001 1 1-2 Collector Ring Mounting Acc. 5300-101-002 1 2 Brushholder 5300-178-001 1 2-1 Brush 176-0001 4 3 Bushing* 1 1/2" to 1-1/4" Bore 180-0116 to 180-0128 4 Magnet 1 6 Volt. 5300-631-002 24 Volt 5300-631-003 90 Volt 5300-631-005 4-1 Terminal Accessory 5311-101-001 1 5 Armature 5300-111-002 1 6 Autogap Accessory 5200-101-009 3 7 Mounting Accessory 5102-101-001 2 *See page 252 for specific part numbers. Refer to Service Manual P-203. Drawing I-25716 Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com