Inertia dynamics pc1000b_specsheet
0 likes59 views
This document provides specifications for a PC-1000 normal duty clutch including a shaft size range from 0.500-2.500 inches, a static torque of 240 lb-ft, a maximum speed of 3,600 rpm, and standard voltages of 6, 24, and 90 VDC. It also includes diagrams of the clutch components, part numbers, and instructions for ordering.
Inertia dynamics pc1000b_specsheet
- 1. Clutch PC-1000 Normal Duty 78 .562 Shaft Size .500 – 2.500 Static Torque 240 lb.ft. Maximum Speed 3,600 rpm Standard Voltage D.C. 6, 24, 90 ARMATURE VIEW See page 230 for details on 1/2-14 NPSM Am. std. straight pipe tap. COLLECTOR RING VIEW Drive Pin mountings. See page 252 for details on Bushings. .062 .171 Max. 5.750 1.453 .093 When New Min. Running Clearance 2.937 11.093 Max. Dia. 10.29 6 Dia. 5.252 Dia. 4.125 Dia. 1.750 7.781 Dia. 1.906 1.750 3.906 Max. All dimensions are nominal unless otherwise noted. Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Clutch PC-1000 Normal Duty 79 Drawing I-25582 7-1 How to Order: 1. Specify Voltage for Item 4. 2. Specify Bore Size for Item 5. 3. Specify left hand or right hand hub for Item 6. (Bush-ing enters from magnet side for L.H. hub and from hub side for R.H.) 4. See Controls Section. Example: PC-1000 Clutch per I-25582 - 90 Volt, L.H. hub, 1" Bore These units meet the standards of UL508 and are listed under guide card #NMTR2, file #59164. These units are CSA certified under file #LR11543. 1 3 4 4-1 2 6 (Shipped Asembled) 7 5 6-1 6-2 Item Description Part Number Qty. 1 Armature 5302-111-013 1 2 Autogap Accessory 5201-101-008 3 3 Mounting Accessory 5321-101-001 1 4 Magnet 1 6 Volt 5302-631-003 24 Volt 5302-631-014 90 Volt 5302-631-005 †90 Volt LK Facing 5302-631-001 4-1 Terminal Accessory 5311-101-001 1 5 Bushing* 1 1/2" to 2-1/2" Bore 180-0185 to 180-0217 6 Magnet Hub 1 Left Hand (shown) 5302-541-001 Right Hand 5302-541-002 6-1 Collector Ring 5301-749-001 1 6-2 Collector Ring Accessory 5302-101-002 1 7 Brushholder 5300-178-001 1 Item Description Part Number Qty. 7-1 Brush 176-0001 4 *See page 252 for specific part numbers. Refer to Service Manual P-206. †Optional LK facing available. For more information, see page 232. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com