Inertia dynamics sf1525f_specsheet
0 likes78 views
This document provides specifications for a SF-1525 flange mounted clutch including a maximum static torque of 700 lb-ft, a maximum speed of 2,000 rpm, and standard voltage options of 6, 24, or 90 VDC. It lists dimensions for the armature, field, rotor hub, and mounting holes. Customers must maintain concentricity and squareness tolerances. The document also provides an exploded view diagram and lists replacement part numbers.
Inertia dynamics sf1525f_specsheet
- 1. Clutch Normal Duty SF-1525 Flange Mounted 60 .562 Max. .218 Shaft Size .937 – 3.000 Static Torque 700 lb.ft. Maximum Speed 2,000 rpm Standard Voltage D.C. 6, 24, 90 See page 230 for details on Drive Pin mountings. ARMATURE VIEW Removable plug in ends for 1/2" conduit. See page 252 for details on Bushings. .358/.338 dia. (12) holes equally spaced on 9.750 dia.* 9.002/9.000 Pilot Dia. .350/.341 dia. (8) holes equally spaced on 8.500 dia. ** 16.875/16.871 Pilot Dia. Customer Shall Maintain: 1. Concentricity of field mounting pilot diameter with rotor mounting shaft within .006 T.I.R. 2. Squareness of field mounting face with rotor mounting shaft within .006 T.I.R. measured at field mounting bolt circle. 3. Rotor mounting shaft concentric with armature center of rotation within .006 T.I.R. 4. Armature hub pilot diameter to be concentric with armature center of rotation within .010 T.I.R. When Hub is Furnished by customer: Rotor mounting pilot diameter must be concentric with rotor mounting shaft within .006 T.I.R. * Mounting holes are within.010 of true position relative to pilot diameter. ** Mounting holes are within .008 of true position relative to pilot diameter. FIELD VIEW (Inside & Outside Mounted) .358/.338 dia. (12) holes equally spaced on 16.000 dia.* 5/16-18 UNC-2B (2) holes equally spaced for removal of rotor from hub. 3.750 Max. 10.343 .593 1.562 .758/.742 2.000 9.187 1.546 .921 5/16-18 UNC-3A .437 .093 When New 15.671 Max. 15.578 Dia. 8.500 Dia. 7.093 Dia. 7.878 7.876 Pilot Dia. 3.031 Max. ® U L All dimensions are nominal unless otherwise noted. Information on inertia and weights begins on page 239. Coil data is on pages 250 and 251. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Normal Duty Clutch 1 2 3 4 5 8A 7A SF-1525 Flange Mounted 9 7B 9 6 8B 61 Drawing I-25625 How to Order: 1. Specify Bore Size for Item 5. 2. Specify Voltage for Item 7A or 7B. 3. Specify Inside Mounted for Items 7A and 8A or Outside Mounted for Items 7B and 8B. 4. See Controls Section. Example: SF-1525 Clutch per I-25625 - 90 Volt, 2" Bore, Inside Mounted. These units, when used in conjunction with the correct Warner Electric conduit box, meet the standards of UL508 and are listed under guide card #NMTR, file #59164. These units are CSA certified under file #LR11543. Item Description Part Number Qty. 1 Armature 5304-111-004 1 2 Autogap Accessory 5201-101-008 4 3 Mounting Accessory 5321-101-002 2 4 Rotor 1 Standard Friction Material 5204-751-002 †Optional LK Facing 5204-751-004 5 Bushing* 1 15/16" to 3" Bore 180-0223 to 180-0256 6 Rotor Hub 540-0004 1 7A Field - Inside Mounted 1 6 Volt 5204-451-013 24 Volt 5204-451-015 90 Volt 5204-451-016 7B Field - Outside Mounted 1 6 Volt 5204-451-055 24 Volt 5204-451-056 90 Volt 5204-451-057 8A Mounting Accessory - I.M. 5321-101-001 2 Item Description Part Number Qty. 8B Mounting Accessory - O.M. 5321-101-001 2 9 Conduit Box 5200-101-012 1 *See page 252 for specific part numbers. Refer to Service Manual P-215. †Optional LK facing available. For more information, see page 232. Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com