Inertia dynamics flangemtbk310s_specsheet
0 likes75 views
The document provides technical specifications for model 310 flange mounted brakes, including torque and speed ratings. It lists recommended part numbers for brake assemblies and individual replacement parts, noting that customers must maintain close tolerances for concentricity and perpendicularity. Torque and heat dissipation curves are available in Section M.
Inertia dynamics flangemtbk310s_specsheet
- 1. H-16 Technical Data and Torque (In. Lb.) 2.75 Static Max. Coil * Rated RPM Model Wt. Torque Speed Voltage Current No. Lbs. in. lb. RPM vdc amps 0 300 600 900 1200 1500 1800 2400 310 25.1 3600 2400 90 .60 3600 3144 2616 2088 1788 1596 1416 1044 * Rated current at 90v. Customer must maintain: 1. Concentricity between mounting fl ange and shaft within .010. 2. Perpendicularity between mounting surface and shaft within .010. Refer to Section M for torque and heat dissipation curves. Flange Mounted Spline Drive Model 310 Bushing 2517 Bore ‘E’ Keyway Part No. 1/2 .500 .125 x .062 326039 - 1 9/16 .562 .125 x .062 326039 - 2 5/8 .625 .187 x .093 326039 - 3 11/16 .687 .187 x .093 326039 - 4 3/4 .750 .187 x .093 326039 - 5 13/16 .812 .187 x .093 326039 - 6 7/8 .875 .187 x .093 326039 - 7 15/16 .937 .250 x .125 326039 - 8 1 1.000 .250 x .125 326039 - 9 1-1/16 1.062 .250 x .125 326039 - 10 1-1/8 1.125 .250 x .125 326039 - 11 1-3/16 1.187 .250 x .125 326039 - 12 1-1/4 1.250 .250 x .125 326039 - 13 1-5/16 1.312 .312 x .156 326039 - 14 1-3/8 1.375 .312 x .156 326039 - 15 1-7/16 1.437 .375 x .187 326039 - 16 1-1/2 1.500 .375 x .187 326039 - 17 1-9/16 1.562 .375 x .187 326039 - 18 1-5/8 1.625 .375 x .187 326039 - 19 1-11/16 1.687 .375 x .187 326039 - 20 1-3/4 1.750 .375 x .187 326039 - 21 1-13/16 1.812 .500 x .250 326039 - 22 1-7/8 1.875 .500 x .250 326039 - 23 1-15/16 1.937 .500 x .250 326039 - 24 2 2.000 .500 x .250 326039 - 25 2-1/16 2.062 .500 x .250 326039 - 26 2-1/8 2.125 .500 x .250 326039 - 27 2-3/16 2.187 .500 x .250 326039 - 28 2-1/4 2.250 .500 x .250 326039 - 29 2-5/16 2.312 .625 x .187 326039 - 30 2-3/8 2.375 .625 x .187 326039 - 31 2-7/16 2.437 .625 x .187 326039 - 32 2-1/2 2.500 .625 x .187 326039 - 33 Flange Mounted Brake Order Parts for Assembly No. FC310054 and FC310055 FC310054 FC310055 Armature Plate Magnet (2517) Taper Mounting Plate with Accessory Armature Hub Assembly Accessory Bushing Inside Mounted Outside Mounted Magnet 24 Volts 310680 310383-13 326078 326039-XX 310481 310491 310373 90 Volts 310680 310383-13 326078 326039-XX 310481 310491 310374 To order, specify: 1, Armature Hub 1, Armature Plate Assembly 1, Magnet Accessory 1, Taper Bushing (2517) of required Bore size 1, Mounting Plate with Accessory for either Inside Mount or Outside Mount 1, Magnet of required Voltage For controls, see Section K. Sold Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. H-17 Flange Mounted Brake – Replacement Parts 5 3 Assembled 3A 3C 3B 4 6 2 1 Inside Mount 1 Outside Mount Replacement Parts Item Qty. Description Part No. Item Qty. Description Part No. 4 1 Armature Hub 310680 5 1 Magnet 24 Volts 310373 90 Volts 310374 6 1 Taper Bushing (2517) 326039-XX 1 1 Mounting Plate w/Accessory Inside Mounting 310481 Outside Mounting 310491 2 1 Magnet Accessory 326078 3 1 Armature Plate Assy. (39 Teeth) 310383-13 3-A 1 Drag Spring 326277 3-B 1 Ajusto-gap® Spring 326970 3-C 1 Retaining Ring RY-20317 ✽ ✽ Current design armatures are solid. Sold Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com