InstallingRoRinLinux
- 1. Installing Ruby on Rails in Linux General rules Some general ideas apply throughout the installation. • Each Linux distribution has its own idiosyncrasies. The steps that work with Red Hat Linux don't necessarily work the same way with SUSE Linux. The same is true for different versions of the same distribution. For example, what works well in Fedora Core 6 may not work exactly the same way in Fedora Core 5. Your best bet is to find your distribution's most recent version. (I realize that installing the most recent version isn't always practical. But sometimes, having the most recent version makes the difference between an effortless installation and a painintheneck installation.) • Some of the steps described in this document can be executed only with root privileges. The best way to get temporary root privileges is to issue a sudo command. For example, to search for all files ending in .rpm, and to do so as the big, powerful root user, open a terminal window and type sudo find / name *.rpm print After typing a sudo command, the system asks you for the root user's password. For newly installed Linux systems, the root password is something that's simple and welldocumented. For example, the root password may be root, or there may be no root password (in which case, you press Enter when you're prompted for the root password). On established Linux systems (systems that you use at work, for example) you must obtain the root password from your system administrator (after giving the administrator a pound of flesh). • Don't hesitate to make use of your favorite search engine. Even the most obscure Linux distribution has fans who post advice. If you're running into trouble, chances are good that someone else has already run into the same trouble. And whenever people post problems, other people post solutions. • On many Linux distributions, you can find out which packages are installed by typing the rpm command with the q switch. For example, the command rpm qa | grep i ruby queries Linux to display the names of all installed packages, and displays any names containing the word ruby (ignoring upper versus lowercase). Remember that what I call “Ruby” in my book (Ruby on Rails For Dummies) may consist of several Linux packages. So even when the rpm command displays a ruby line, you may not have all the software needed to run the programs in the book. • For more information on utilities such as rpm, yum, and apt, consult your system's man pages. For example, to get an overview of the rpm command's options, open a terminal window and type man rpm © 2007 Wiley Publishing, Inc. 1
- 2. Alternatives within Linux Linux installations come in several different flavors. In particular, each Linux distribution favors a particular installation routine and a particular format for installation files. Installation routines An installation routine is a program that you run (typically by typing a command in the terminal window). An installation routine might have several options – options for listing all installed packages, options for discovering packages that are available for installation, and options for installing and uninstalling packages. There are two commonly used installation routines; namely, yum and apt. The yum routine comes with Red Hat Fedora Linux and its variants; the apt routine comes with Debian Linux and its variants. Knowing which routine your system has may be a simple matter of typing man yum or man apt to see if your system displays manual pages for either. In some cases, a particular Linux system may support both yum and apt. Installation file format There are two commonly used formats for installation packages; namely, rpm and dpkg. For example, a file named ruby1.8.5.i586.rpm is coded in the rpm format. The rpm format works well with Red Hat Fedora Linux and its variants; the dpkg format works with Debian Linux and its variants. Things go smoothly when you figure out which format works best on your system, and look for installation packages in that format. But some Linux systems have an alien command. The alien command can convert back and forth between rpm and dpkg formats. This is handy if, for example, your system works best with .dpkg files, but your stuck with a file named somepackageor other.rpm. For more information on the alien command, type man alien Using yum to Install Ruby on Rails This section describes the use of yum to install software. If your system uses apt instead of yum, then skip this section (and read the next section instead). Here's how you can install Ruby on Rails using yum: 1. Make sure you have an active Internet connection. 2. Open a terminal window. © 2007 Wiley Publishing, Inc. 2
- 3. 3. Type the following command: yum install ruby In response, the yum installer reaches out along the Internet, and finds repositories containing the appropriate Ruby package (the package that's appropriate for your Linux distribution and version). The yum installer will add this Ruby package to your system. But first, yum will check your system to make sure that you have any packages on which the new Ruby package depends. The yum installer looks for packages that Ruby needs in order to run, looks for packages that these needed packages require in order to run, and so on. This is a very good thing. (If you've ever had to manually track down package dependencies on a Linux system, you know how painful it can be!) When the yum installer text stops racing along in the terminal window, and you see the familiar old command prompt, you have Ruby installed on your system. Tip You can download many useful package using the yum installer, but the names of these packages change over time. Who knows? Maybe you should type yum install rubycore instead of yum install ruby. Maybe the Ruby language comes in several parts, with several different yum packages. You can discover the names of available packages using the yum command's list option. For example, you want to see the names of all available packages whose names contain the word ruby. Then open a terminal window and type the following command: yum list | grep i ruby Alternatively, you may try either of the following commands: yum provides ruby yum search ruby Remember You can check to make sure that the Ruby installation went smoothly. To do so, type rpm qa | grep i ruby in the terminal window. 4. In a terminal window type the following command: yum install rubygems RubyGems is the name of Ruby's own installer. RubyGems is like yum. What yum does for Linux, RubyGems does for Ruby. After installing RubyGems, you'll be able to add extra functionality to your Ruby programming environment. Of course, you can't use RubyGems itself to install RubyGems. (That would be like asking a baby to give birth to itself.) So you use yum to install RubyGems. © 2007 Wiley Publishing, Inc. 3
- 4. Tip For more information about RubyGems, visit http://rubygems.org/. With RubyGems installed, you can use RubyGems to install other Ruby stuff. 5. In a terminal window type the following command: gem install rails includedependencies In response, RubyGems installs Rails on your Linux system. (In case it's not clear, the command has three dashes: two dashes immediately before the word include, and one dash between the words include and dependencies. There are no blank spaces in the phrase includedependencies.) 6. Make sure that MySQL is installed on your system. To do so, type the following two commands: yum install mysql yum install mysqlserver yum install mysqladministrator After each command you get a bunch of messages telling you that yum is installing the necessary MySQL packages. 7. Visit http://www.radrails.org and download a version of RadRails that's appropriate for your system. For many Linux systems, a file with a name like radrails0.x.xlinuxgtk.tar.gz works nicely. This .tar.gz file is a compressed archive. 8. Examine the contents of the .tar.gz file. On most systems you can do this by doubleclicking the file's icon. The radrails0.x.xlinuxgtk.tar.gz file contains a folder named radrails. 9. Extract the radrails folder to a convenient place on your system's directory structure. On most systems you can extract stuff from a compressed archive by dragging the stuff from one file manager window to another. That's it! You're ready to test the installation. Using apt to Install Ruby on Rails This section describes the use of apt to install software. If your system uses yum instead of apt, read the previous section. Here's how you can install Ruby on Rails using apt: 1. Make sure you have an active Internet connection. 2. Open a terminal window. © 2007 Wiley Publishing, Inc. 4
- 5. 3. Type the following commands: aptget install ruby ri rdoc mysqlserver libmysqlruby aptget install mysqladmin In response, the apt installer reaches out along the Internet, and finds repositories containing the appropriate Ruby package (the package that's appropriate for your Linux distribution and version). The apt installer will add this Ruby package to your system. But first, apt will check your system to make sure that you have any packages on which the new Ruby package depends. The apt installer looks for packages that Ruby needs in order to run, looks for packages that these needed packages require in order to run, and so on. This is a very good thing. (If you've ever had to manually track down package dependencies on a Linux system, you know how painful it can be!) When the apt installer text stops racing along in the terminal window, and you see the familiar old command prompt, you have Ruby installed on your system. Tip You can download many useful package using the aptget installer, but the names of these packages change over time. Who knows? Maybe you should type aptget install rubycore instead of aptget install ruby. Maybe the Ruby language comes in several parts, with several different packages. You can discover the names of available packages using the aptcache command's search option. For example, you want to see the names of all available packages whose names contain the word ruby. Then open a terminal window and type the following command: aptcache search ruby namesonly 4. Visit http://rubyforge.org and download a package named RubyGems. Most likely, you'll be downloading a file named rubygemssomethingorother.tgz. The .tgz extension indicates that this file is a compressed file in tar/gzip format. You can uncompress the file by doubleclicking the file's icon with your system's file browser. If that doesn't work, try typing tar xvzf rubygemsfilename.tgz 5. Find the directory containing the uncompressed contents of the rubygems file. In that directory (or in one of its subdirectories), look for a file named setup.rb. This setup.rb file is a Ruby program that installs the RubyGems package. So, to install RubyGems, issue the following command: ruby setup.rb RubyGems is the name of Ruby's own installer. RubyGems is like apt. What apt does for Linux, RubyGems does for Ruby. After installing RubyGems, you'll be able to add extra functionality to your Ruby programming environment. Of course, you can't use RubyGems itself to install RubyGems. (That would be like asking a baby to give birth to itself.) So you use Ruby to install RubyGems. © 2007 Wiley Publishing, Inc. 5
- 6. Tip For more information about RubyGems, visit http://rubygems.org/. With RubyGems installed, you can use RubyGems to install other Ruby stuff. 6. In a terminal window type the following command: gem install rails includedependencies In response, RubyGems installs Rails on your Linux system. (In case it's not clear, the command has three dashes: two dashes immediately before the word include, and one dash between the words include and dependencies. There are no blank spaces in the phrase includedependencies.) 7. Visit http://www.radrails.org and download a version of RadRails that's appropriate for your system. For many Linux systems, a file with a name like radrails0.x.xlinuxgtk.tar.gz works nicely. This .tar.gz file is a compressed archive. 8. Examine the contents of the .tar.gz file. On most systems you can do this by doubleclicking the file's icon. The radrails0.x.xlinuxgtk.tar.gz file contains a folder named radrails. 9. Extract the radrails folder to a convenient place on your system's directory structure. On most systems you can extract stuff from a compressed archive by dragging the stuff from one file manager window to another. In the next section, you test the Ruby on Rails installation. Running Ruby on Rails Here's how you test your Ruby on Rails installation: 1. To run the MySQL server, open a terminal window and type the following command: /etc/rc.d/init.d/mysqld start If that doesn't work, poke around for things named mysqld on your system. If you're logged on as root, you can find mysqld by issuing the following command: find / name mysqld print Technical Stuff The name mysqld stands for “mysql daemon.” On a Linux system, a program that runs constantly in the background (a database server, for example) is called a “daemon.” 2. In a file manager window, navigate to the radrails directory (the directory that you created in Step 9 of the “Using yum” section). © 2007 Wiley Publishing, Inc. 6
- 7. That radrails directory contains an executable file named RadRails. 3. Doubleclick the RadRails file's icon. The RadRails IDE opens in all of ts glory. i From that point on, you follow the steps in my Ruby on Rails For Dummies book: the steps for creating a new project, running some Ruby code, creating and testing a Rails application, and so on. Tip When I first tried to run db:migrate I got an error message telling me that Rake couldn't find the mysql.sock file. So I looked for my system's mysql.sock file by typing the following command: find / name mysql.sock print Then I went back to RadRails and edited my project's config/database.yml file. In the file's development section, I added a line pointing to my system's mysql.sock file: development: adapter: mysql socket: /var/lib/mysql/mysql.sock That worked like a charm. © 2007 Wiley Publishing, Inc. 7