Internetworking basics
- 2. What Is an Internetwork? is a collection of individual networks, connected by intermediate networking devices, that functions as a single large network. refers to the industry, products, and procedures that meet the challenge of creating and administering internetworks.
- 4. History of Internetworking The first networks were time-sharing networks that used mainframes and attached terminals. Such environments were implemented by both IBM’s Systems Network Architecture (SNA) and Digital’s network architecture.
- 5. Local-area networks (LANs) evolved around the PC revolution. LANs enabled multiple users in a relatively small geographical area to exchange files and messages, as well as access shared resources such as file servers and printers.
- 6. Wide-area networks (WANs) interconnect LANs with geographically dispersed users to create connectivity. Some of the technologies used for connecting LANs include T1, T3, ATM, ISDN, ADSL, Frame Relay, radio links, and others. New methods of connecting dispersed LANs are appearing everyday.
- 7. Today, high-speed LANs and switched internetworks are becoming widely used, largely because they operate at very high speeds and support such high-bandwidth applications as multimedia and videoconferencing.
- 8. Internetworking evolved as a solution to three key problems: isolated LANs duplication of resources a lack of network management.
- 9. Isolated LANs made electronic communication between different offices or departments impossible.
- 10. Duplication of resources meant that the same hardware and software had to be supplied to each office or department, as did separate support staff.
- 11. lack of network management meant that no centralized method of managing and troubleshooting networks existed.
- 13. Connectivity The challenge when connecting various systems is to support communication among disparate technologies. Different sites, for example, may use different types of media operating at varying speeds, or may even include different types of systems that need to communicate.
- 14. Reliability Internetworks must provide a certain level of reliability because companies rely heavily on data communication. This is an unpredictable world, so many large internetworks include redundancy to allow for communication even when problems occur.
- 15. Network management Network management must provide centralized support and troubleshooting capabilities in an internetwork. Configuration, security, performance, and other issues must be adequately addressed for the internetwork to function smoothly. Security within an internetwork is essential.
- 16. Flexibility Internetworks must be flexible enough to change with new demands because nothing in this world is stagnant.
- 17. Open System Interconnection Reference Model describes how information from a software application in one computer moves through a network medium to a software application in another computer. developed by the International Organization for Standardization (ISO) in 1984, and it is now considered the primary architectural model for intercomputer communications.
- 18. Seven layers of the Open System Interconnection (OSI) reference model: Layer 7—Application • Layer 6—Presentation • Layer 5—Session • Layer 4—Transport • Layer 3—Network • Layer 2—Data link • Layer 1—Physical
- 19. A handy way to remember the seven layers is the sentence “All people seem to need data processing.” The beginning letter of each word corresponds to a layer. All—Application layer People—Presentation layer Seem—Session layer To—Transport layer Need—Network layer Data—Data link layer Processing—Physical layer
- 20. Characteristics of the OSI Layers The seven layers of the OSI reference model can be divided into two categories: upper layers and lower layers. 1. The upper layers of the OSI model deal with application issues and generally are implemented only in software. 2. The lower layers of the OSI model handle data transport issues. The physical layer and the data link layer are implemented in hardware and software.
- 22. Protocols is a formal set of rules and conventions that governs how computers exchange information over a network medium. implements the functions of one or more of the OSI layers.
- 23. variety of communication protocols LAN protocols WAN protocols network protocols routing protocols
- 24. LAN protocols operate at the physical and data link layers of the OSI model and define communication over the various LAN media.
- 25. WAN protocols operate at the lowest three layers of the OSI model and define communication over the various wide-area media.
- 26. Routing protocols are network layer protocols that are responsible for exchanging information between routers so that the routers can select the proper path for network traffic.
- 27. network protocols are the various upper-layer protocols that exist in a given protocol suite.
- 28. OSI Model and Communication Between Systems Information being transferred from a software application in one computer system to a software application in another must pass through the OSI layers. For example, a software application in System A has information to transmit to a software application in System B.
- 29. • The application program in System A will pass its information to the application layer (Layer 7) of System A. • The application layer then passes the information to the presentation layer (Layer 6), which relays the data to the session layer (Layer 5), and so on down to the physical layer (Layer 1).
- 30. • At the physical layer, the information is placed on the physical network medium and is sent across the medium to System B.
- 31. • The physical layer of System B removes the information from the physical medium, and then its physical layer passes the information up to the data link layer (Layer 2), which passes it to the network layer (Layer 3), and so on, until it reaches the application layer (Layer 7) of System B. • Finally, the application layer of System B passes the information to the recipient application program to complete the communication process.
- 32. Interaction Between OSI Model Layers A given layer in the OSI model generally communicates with three other OSI layers: the layer directly above it, the layer directly below it, and its peer layer in other networked computer systems. The data link layer in System A, for example, communicates with the network layer of System A, the physical layer of System A, and the data link layer in System B. Figure 1-4 illustrates this example.
- 33. OSI Layer Services One OSI layer communicates with another layer to make use of the services provided by the second layer. The services provided by adjacent layers help a given OSI layer communicate with its peer layer in other computer systems. Three basic elements are involved in layer services: 1. the service user 2. the service provider 3. service access point (SAP).
- 34. service user is the OSI layer that requests services from an adjacent OSI layer
- 35. service provider is the OSI layer that provides services to service users. OSI layers can provide services to multiple service users.
- 36. SAP is a conceptual location at which one OSI layer can request the services of another OSI layer.
- 37. Figure 1-5 illustrates how these three elements interact at the network and data link layers.
- 38. OSI Model Layers and Information Exchange The seven OSI layers use various forms of control information to communicate with their peer layers in other computer systems. This control information consists of specific requests and instructions that are exchanged between peer OSI layers.
- 39. Control information typically takes one of two forms: 1. Headers are prepended to data that has been passed down from upper layers. 2. Trailers are appended to data that has been passed down from upper layers.
- 40. Information Exchange Process The information exchange process occurs between peer OSI layers. Each layer in the source system adds control information to data, and each layer in the destination system analyzes and removes the control information from that data.
- 41. If System A has data from a software application to send to System B, the data is passed to the application layer. The application layer in System A then communicates any control information required by the application layer in System B by prepending a header to the data. The resulting information unit (a header and the data) is passed to the presentation layer, which prepends its own header containing control information intended for the presentation layer in System B.
- 42. The information unit grows in size as each layer prepends its own header (and, in some cases, a trailer) that contains control information to be used by its peer layer in System B. At the physical layer, the entire information unit is placed onto the network medium. The physical layer in System B receives the information unit and passes it to the data link layer.
- 43. The data link layer in System B then reads the control information contained in the header prepended by the data link layer in System A. The header is then removed, and the remainder of the information unit is passed to the network layer.
- 44. Each layer performs the same actions: The layer reads the header from its peer layer, strips it off, and passes the remaining information unit to the next highest layer. After the application layer performs these actions, the data is passed to the recipient software application in System B, in exactly the form in which it was transmitted by the application in System A.