Iot survey
7 likes3,686 views
The document discusses the Internet of Things (IoT) and how connected devices communicate with each other over various personal area networks and protocols. It provides examples of common IoT devices like sensors and describes how they can be integrated using platforms like Arduino, Raspberry Pi, Android and APIs. The goal of IoT is to connect everyday objects to enable data collection and management to increase efficiency and enable new applications across various industries.
Iot survey
- 2. Defined The Internet of Things connects devices such as everyday consumer objects and industrial equipment onto the network, enabling information gathering and management of these devices via software to increase efficiency, enable new services or achieve other health, safety, or environmental benefits.
- 3. Internet Of Things Name Coined by Kevin Ashton 1999 Originally for RFID Lipstick inventory problem Apps moving from the smartphone to a world of connected devices Internet of Things aka IoT If RFID is an IoT….. Then???
- 5. Moo Monitor
- 6. My Journey With IoT Graphic: Sketchup
- 7. Outdoor Light On/Off Timer Photo Switch
- 8. Outdoor Lights Sunrise Nov 5 - 7:20 am June 15 - 5:16 am Sunset Dec 8 - 4:20pm Jun 27 - 8:31pm My Season Problem:
- 9. `
- 10. Where is IoT going?
- 13. How do things physically communicate with each other?
- 14. Personal Area Networks (PAN) INSTEON IrDA Wireless USB Bluetooth Z-Wave ZigBee Body Area Network
- 16. WiFi
- 17. ZigBee TI CC2530
- 18. 6LoWPAN
- 19. Thread Group
- 20. Other Communication Channels AllJoyn OIC Adept Many many more Muzzley *IFTTT * used most widely
- 21. AllJoyn One of many attempts at a standard AllJoyn is a API/framework for Standard Clients Thin Clients Not compatible with BLE
- 22. Open Interconnect Consortium (OIC) IoTivity
- 23. Adept IBM: Blockchain, Telehash, Bittorrent
- 24. Android
- 25. Android (BLE) Uses Permission "android.permission.BLUETOOTH" “android.permission.BLUETOOTH_ADMIN" Android BLE Ref <uses-feature android:name="android.hardware.bluetooth_le" android:required="true"/>
- 27. HomeKit
- 28. iPhone HomeKit Framework Bridge A device device device Bridge B device device device HAPHAP HAP ZigBee ZWave Bridge C device device device HAP BLE HAP - HomeKet Accessory Protocol over BLE or WiFi 3rd Party Apps HomeKit Topology AppleTV Internet iGrillHAP
- 30. Aside: iBeacon / Beacon Indoor Positioning System Low Cost Low Power No Connection needed Transmission is Clear Broadcasts RSSI -RX Signal Strength TX Power ID Distance Immediate Near Far Unknown
- 31. iBeacon Frame Format Ref: iBeacon
- 32. How does this all fit together?
- 33. Network App Phy/Mac Transport 6loWPan IP UDP Muzzley ZigBee IP WiFi IP BLE API Layers UART MQTT AllJoyn OIC/IoTivity CoAP WeMo TCP 802.15.4 HAP CSR
- 34. Creating
- 35. Creating TI Sensor BLE Tag - $25 RaspberyPi ~ $32 Arduino Arduino Yun (Linux/WiFi) ~ $75 Red Bear Labs (BLE) ~ $23 - $40 Android iOS
- 36. TI Sensor Tag
- 38. Raspberry Pi
- 39. Arduino - Red Bear Labs Arduino Micro Controller Nordic Semiconductor BLE on board
- 40. Arduino Yun Arduino Micro Controller OpenWRT Bridge for Arduino and OpenWRT to communicate
- 41. Lots of Others Pinicc.io Intel Curie ElectricImp Spark Photon Tiny Duino Intel Edison
- 43. littleBits