![Dotted Decimal Notation
• IP addresses are written in a so-called dotted decimal
notation
• Each byte is identified by a decimal number in the range
[0..255]:
• Example:
1000111110000000 10001001 10010000
1st
Byte
= 128
2nd
Byte
= 143
3rd
Byte
= 137
4th
Byte
= 144
128.143.137.144](https://image.slidesharecdn.com/module32-170320143555/85/IP-Address-5-320.jpg)
IP Address
- 1. Buddha Institute Of Technology, Gorakhpur IP Address Represented By:- •Sameer Alam •Arvind Agrahari
- 2. IP Addresses • Structure of an IP address • Subnetting • CIDR • IP Version 6 addresses
- 3. IP Addresses Application dataTCP HeaderEthernet Header Ethernet Trailer Ethernet frame IP Header version (4 bits) header length Type of Service/TOS (8 bits) Total Length (in bytes) (16 bits) Identification (16 bits) flags (3 bits) Fragment Offset (13 bits) Source IP address (32 bits) Destination IP address (32 bits) TTL Time-to-Live (8 bits) Protocol (8 bits) Header Checksum (16 bits) 32 bits
- 4. What is an IP Address? • An IP address is a unique global address for a network interface • An IP address: - is a 32 bit long identifier - encodes a network number (network prefix) and a host number
- 5. Dotted Decimal Notation • IP addresses are written in a so-called dotted decimal notation • Each byte is identified by a decimal number in the range [0..255]: • Example: 1000111110000000 10001001 10010000 1st Byte = 128 2nd Byte = 143 3rd Byte = 137 4th Byte = 144 128.143.137.144
- 6. • The network prefix identifies a network and the host number identifies a specific host (actually, interface on the network). • How do we know how long the network prefix is? – The network prefix used to be implicitly defined (class- based addressing, A,B,C,D…) – The network prefix now is flexible and is indicated by a prefix/netmask (classless). Network prefix and Host number network prefixnetwork prefix host numberhost number
- 7. Example: ellington.cs.virginia.edu •IP address is 128.143.137.144 – Is that enough??? -> No, need netmask or prefix •Using Prefix notation IP address is: 128.143.137.144/16 – Network prefix is 16 bits long •Network mask is: 255.255.0.0 or hex format: ffff0000 -----> Network id (IP address AND Netmask) is: 128.143.0.0 -----> Host number (IP address AND inverse of Netmask) is: 137.144 Example 128.143128.143 137.144137.144
- 8. Subnetting Subnetting University NetworkUniversity Network Medical School Library Engineering School • Problem: Organizations have multiple groups/entities within their organization which are independently managed. Each would prefer to manage their own IT facilities, i.e., own network – Solution 1: Allocate to each entity their own IP network/domain • Organization must own multiple IP address domains • Expensive (each IP domain costs money) and cumbersome to manage – Solution 2: Add another level of hierarchy to the existing IP addressing structure
- 9. • Split the host number portion of an IP address into a subnet number and a (smaller) host number. • Result is a 3-layer hierarchy • Then: • Subnets can be freely assigned within the organization • Internally, subnets are treated as separate networks • Subnet structure is not visible outside the organization Basic Idea of Subnetting network prefixnetwork prefix host numberhost number subnet numbersubnet numbernetwork prefixnetwork prefix host numberhost number extended network prefix
- 10. 128.143.0.0/16 • In this IP domain, each Ethernet segment is allocated a subnet address. Typical Addressing Plan for an Organization that uses subnetting Extended Prefix Network Prefix 1 2 8 .1 4 3 .1 7 .0 / 2 4 1 2 8 .1 4 3 .7 1 .0 / 2 4 1 2 8 . 1 4 3 .7 .0 / 2 4 1 2 8 .1 4 3 .1 6 .0 / 2 4 1 2 8 .1 4 3 .8 .0 / 2 4 1 2 8 .1 4 3 .2 2 .0 / 2 4 1 2 8 .1 4 3 .1 3 6 .0 / 2 4
- 11. Advantages of Subnetting • With subnetting, IP addresses use a N-layer hierarchy. E.g., a 3 layer hierarchy would be: » Network (IP domain) » Subnet » Host • Improves efficiency of IP addresses by not consuming an entire address space for each physical network. • Reduces router complexity. Since external routers do not know about subnetting, the complexity of routing tables at external routers is reduced. • Note: Length of the subnet mask need not be identical at all subnetworks.
- 14. Same Network with Subnets
- 15. Same network with different subnetmasks
- 16. Subnetting Example • An organization with 4 departements has the following IP address space: 10.2.22.0/23. As the systems manager, you are required to create subnets to accommodate the IT needs of 4 departments. The subnets have to support to 200, 61, 55, and 41 hosts respectively. What are the 4 subnet network numbers? • Solution: – 10.2.22.0/24 (256 addresses > 200) – 10.2.23.0/26 (64 addresses >61) – 10.2.23.64/26 (64 addresses > 55) – 10.2.23.128/26 (64 addresses > 41)
- 17. CIDR - Classless Interdomain Routing • Goals: – Restructure IP address assignments to increase efficiency – Hierarchical routing aggregation to minimize route table entries Key Concept: The length of the network id (prefix) in IP addresses is arbitrary/flexible and is defined by the network hierarchy. • Consequence: – Routers use the IP address and the length of the prefix for forwarding. – All advertised IP addresses must include a prefix
- 18. CIDR Example • CIDR notation of a network address: 192.0.2.0/18 • "18" says that the first 18 bits are the network part of the address • The network part is called the network prefix • Example: – Assume that a site requires an IP network domain that can support 1000 IP host addresses – With CIDR, the network is assigned a continuous block of 1024 = 210 (>1000) addresses with a 32-10 = 22-bit long prefix
- 19. CIDR: Prefix Size vs. Host Space CIDR Block Prefix # of Host Addresses /27 32 hosts /26 64 hosts /25 128 hosts /24 256 hosts /23 512 hosts /22 1,024 hosts /21 2,048 hosts /20 4,096 hosts /19 8,192 hosts /18 16,384 hosts /17 32,768 hosts /16 65,536 hosts /15 131,072 hosts /14 262,144 hosts /13 524,288 hosts
- 20. CIDR and Address assignments • Backbone ISPs obtain large blocks of IP address space and then reallocate portions of their address blocks to their customers. Example: • Assume that an ISP owns the address block 206.0.64.0/18, which represents 16,384 (232-18 =214 ) IP host addresses • Suppose a client requires 800 host addresses 512=29 <800<1024=210 -> 32-10 = 22, Assigning a /22 block, i.e., 206.0.68.0/22 -> gives a block of 1,024 (210 ) IP addresses to client.
- 21. Subnetting and Classless Inter Domain Routing (CIDR) • Subnetting is done by allocating some of the leading bits of the host number to indicate a subnet number. With subnetting, the network prefix and the subnet number make up an extended network prefix. The extended prefix can be expressed in terms of a subnetmask or, using CIDR notation, by adding the length of the extended subnetmask after the IP address. For example, for Argon, the first byte of the host number (the third byte of the IP address) is used to denote the subnet number. 128.143.0.0/16 is the IP address of the network (network prefix /16), 128.143.137.0/24 is the IP address of the subnet, 128.143.137.144/32 is the IP address of the host, and 255.255.255.0 is the subnetmask of the host (or subnet prefix /24))
- 22. CIDR and Routing Information 206.0.64.0/18 204.188.0.0/15 209.88.232.0/21 Internet Backbone ISP K owns: Company X : 206.0.68.0/22 ISP Y : 209.88.237.0/24 Organization Z1 : 209.88.237.192/26 Organization Z2 : 209.88.237.0/26
- 23. CIDR and Routing Information 206.0.64.0/18 204.188.0.0/15 209.88.232.0/21 Internet Backbone ISP K owns: Company X : 206.0.68.0/22 ISP Y : 209.88.237.0/24 Organization Z1 : 209.88.237.192/26 Organization Z2 : 209.88.237.0/26 Backbone sends everything which matches the prefixes 206.0.64.0/18, 204.188.0.0/15, 209.88.232.0/21 to ISP K. ISP K sends everything which matches the prefix: 206.0.68.0/22 to Company X, 209.88.237.0/24 to ISP Y Backbone routers do not know anything about Company X, ISP Y, or Organizations Z1, Z2. ISP K does not know about Organizations Z1, Z2. ISP Y sends everything which matches the prefix: 209.88.237.192/26 to Organizations Z1 209.88.237.0/26 to Organizations Z2
- 24. CIDR and Routing • Aggregation of routing table entries: – 128.143.0.0/16 and 128.142.0.0/16 can be represented as 128.142.0.0/15 at a router. • ???? • Longest prefix match: Routing table lookup finds the routing entry that matches the longest prefix – Why???? E.g., What is the outgoing interface for destination IP address: 128.143.137.0? Prefix Interface/outg oing link 128.143.128.0/17 interface #1 128.128.0.0/9 interface #2 128.0.0.0/4 interface #5 Routing table
- 25. IPv6 - IP Version 6 • IP Version 6 – Is the successor to the currently used IPv4 – Specification completed in 1994 – Makes improvements to IPv4 (no revolutionary changes) • One (not the only !) feature of IPv6 is a significant increase in size of the IP address to 128 bits (16 bytes) • IPv6 will solve – for the foreseeable future – the problems with IP addressing
- 26. IPv6 Header A p p lic a tio n d a taTCP HeaderEthernet Header Ethernet Trailer E th e r n e t fr a m e IP v 6 H e a d e r
- 27. IPv6 vs. IPv4: Address Comparison • IPv4 has a maximum of 232 ≈ 4 billion addresses • IPv6 has a maximum of 2128 = (232 )4 ≈ 4 billion x 4 billion x 4 billion x 4 billion addresses
- 28. Notation of IPv6 addresses • Convention: The 128-bit IPv6 address is written as eight 16- bit integers (using hexadecimal digits for each integer) CEDF:BP76:3245:4464:FACE:2E50:3025:DF12 • Short notation: • Abbreviations of leading zeroes: CEDF:BP76:0000:0000:009E:0000:3025:DF12 CEDF:BP76:0:0:9E :0:3025:DF12 • “:0000:0000” can be written as “::” CEDF:BP76:0:0:FACE:0:3025:DF12 CEDF:BP76::FACE:0:3025:DF12 • IPv6 addresses derived from IPv4 addresses have different formats. Convention allows to use IPv4 notation for the last 32 bits. 128.143.137.144 -> 0:0:0:0:0:ffff:808F:8990 or 128.143.137.144 -> 2002:808f:8990:0:0:0:0:0 (called 6to4 address)
- 29. IPv6 Provider-Based Addresses • The first IPv6 addresses will be allocated to a provider-based plan • Type: Set to “010” for provider-based addresses • Registry: identifies the agency that registered the address The following fields have a variable length (recommeded length in “()”) • Provider: Id of Internet access provider (16 bits) • Subscriber: Id of the organization at provider (24 bits) • Subnetwork: Id of subnet within organization (32 bits) • Interface: identifies an interface at a node (48 bits) Registry ID Registry ID Provider ID Provider ID 010010 Subscriber ID Subscriber ID Interface ID Interface ID Subnetwork ID Subnetwork ID
- 30. More on IPv6 Addresses • The provider-based addresses have a similar flavor as CIDR addresses • IPv6 provides address formats for: – Unicast – identifies a single interface – Multicast – identifies a group. Datagrams sent to a multicast address are sent to all members of the group – Anycast – identifies a group. Datagrams sent to an anycast address are sent to one of the members in the group.