IRJET- Implementation of Cloud based Health Care Monitoring System using IoT

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 06 Issue: 03 | Mar 2019 www.irjet.net p-ISSN: 2395-0072
© 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 3978
IMPLEMENTATION OF CLOUD BASED HEALTH CARE MONITORING
SYSTEM USING IoT
Dr.P.Kannan (M.E, PhD)1, Nandhini.S2, Nasrine Jaheer3, Naveena.R4, Rajeshwari.V5
1Professor, Department of Electronics & Communication Engineering, Panimalar Engineering College, Chennai,
Tamil Nadu -600123
2,3,4,5UG Scholar, Department of Electronics & Communication Engineering, Panimalar Engineering College,
Chennai, Tamil Nadu -600123
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract – Diagnosis and monitoring of health is a very
important task in the healthcare industry. Many studies show
that early prediction is the best way to cure health because
early diagnosis will help and alert the doctors to know the
health status. With the increasing use of technology, thereisan
urgent need to have such a smart health monitoring system
that can communicate between network devices and
application which will help thepatientsand doctorstomonitor,
track and record the patient’s sensitive data containing
medical information. This paper depicts the idea of solving
health issues using the latest technology, the InternetofThings
(IoT). Using this system architecture, the patient's body
parameters can be measured in real time. Sensors collect
patients body parameters like temperature, motion, eye blink
and the moisture which transfers the data to Microcontroller
ATMEL 89s52 which further transfers that data to the Cloud
server. Medical History is stored in the cloud for easily
accessing and future analysis.
Key Words: Internet of Things (IoT), Cloud Server,
Temperature, Motion, Eyeblink, Moisture, Internet of
Medical Things (IoMT).
1.INTRODUCTION
The Internet of Medical Things (IoMT) is a
subcategory of IoT and is transforming the healthcare
sector. Connected systems of sensors and devices,
either on or near the patient, are capturing vital data
which isbeingusedtosupportclinicaldecisionmaking.
A thing, in the Internet of Things, can be a person
with a heart monitor implant, a farm animal with a
biochip transponder - or any other natural or man-
made object that can be assigned an IP address and
provided with the ability to transfer data over a
network.
1.1 EXISTING SYSTEM
With the development of IoT health monitoring in
real time has become easier. There are various
instruments available in the market to keep track of
internal body changes. But there are many limits in
maintenance part due to their heavy cost, size of
instruments and mobility of patients. In the existing
system, we use different types of sensors to get the
analog values from the patient and uses the Arduino
microcontroller with the baud rate of 9600 and IoT
module to update the sensor values to the cloud. This
helps the doctor to access the patient's health status
from anywhere. But medical systems require very
precise and faster real-time updates as it deals with
extremely critical conditions. Hence we need faster
synchronizing of sensor data. Slow monitoringleadsto
inadequate assessment for analyzing the patient's
status. Hence early detectionofanysignificantchanges
is hindered.
1.2 PROPOSED SYSTEM
In our project, we use PIC microcontroller which is
faster and gives more precise data computations.
Sensors on the device are enabled by suitable
communications tomeasurephysiologicalparameters.
Real-time data are sent from sensors to the
microcontroller which is then computed and sent to
the cloud for the future references by the doctor.
Depending on the patient's currenthealthstatuswhich
is monitored appropriate steps can be taken
immediately to aid in any emergency situations. Key
features of Real-Time health monitoringdevicesisthat
it enables early detection of deterioration; thereby
reducing the number of emergency department visits,
hospitalizations, and duration of hospital stays.

Fig.1. Benefits of IoMT(Internet of Medical Things)
2. LITERATURE SURVEY
2.1 IoT BASED HEALTH MONITORING FOR
PATIENTS WITH CHRONIC ILLNESS
BarathramRamkumarandM.SabarimalaiManikandan,
have explained Internet of Things (IoT) driven health
and wellness monitoringsystemstoenableremoteand
continuousmonitoringofindividuals,withapplications
in chronic conditions, such as hypertension, diabetes,
heart failure, asthma, depression, and elderly care
support. The IoT-driven healthcare system employs
networked biosensors to simultaneously collect
multiplephysiologicalsignalsandwireless connectivity
to share/transmitgatheredsignalsdirectlytothecloud
diagnostic server and the caregivers for further
analysis and clinical review.
2.2 REMOTE MONITORING OF HEALTH STATUS
WITH IoT
Arundhati Sen and T.K. Rana have explained care of
critically ill patient require prompt & accurate
measures. This paper presents a reliable, energy
efficient patient continuous monitoring system from a
local as well as from a remote place. Thissystemisable
to send patient's health parameters like temperature,
body movement and eye blink function in real time
enabling the doctors or the family members to take
measures.
2.3 WIRELESS HEALTH MONITORING SYSTEM
Nicolas and Wai-Chi Fang have explained an advanced
patient-centric bedside monitoring system design
based on wireless body area sensor networks and
telemedicine technologies is proposed in this paper
where each patient uses sensors with wireless
transmission capabilities and transmit the
physiological signals with a larger advanced network,
which is connected to a secured section of the public
network.
2.4 CLOUD BASED HEALTHCARE ANALYSIS
Atul S. Minhas and Poonam Kumari, (2017) [4] have
explainedwearabledevicesforhumanactivitytracking
have been emerging rapidly. Most of these devices are
capable of sending health statistics to smartphones,
smartwatches or smart bands. Such services could
supplement the shortage of staff in primary healthcare
centers thereby reducing the burden on healthcare
service providers. The enormous amount of data
created from such services could also be utilized for
planning future therapies by studying recovery cycles
of existing patients.
3. WORKING PRINCIPLE
TEMPERATURE
SENSOR
PIR
SENSOR
EYE BLINK
SENSOR
WET
SENSOR
PIC
MICRO-
CONTROLLER
LCD
BUZZER
ARDUINO
WIFI MODULE
THINKSPEAK
POWER SUPPLY
Fig.2.Block Diagram
The sensors like temperature sensor, passive infrared
red sensor, wet sensor, eye blink sensor act as the
analog or digital inputs to the PIC microcontroller. The
temperature sensor and the passive infrared red
sensor act as the analog inputs to the microcontroller
and the wet sensor and the eye blink sensor act as the
digital inputs to the PIC microcontroller. The
PIC16F877A microcontroller gives the sensed analog
and digital values to the Arduino which sends the
sensed information to the IoT module (ESP8266 Wi-Fi

module) and updates them in the ThinkSpeak
application.
Fig.3. Circuit Implementation
4. PIC 16F778A MICROCONTROLLER
Fig .4. PIC Microcontroller
The PIC microcontrollerPIC16F877Aisoneofthemost
renowned microcontrollers in the industry. This
controller is very convenient to use, the coding or
programming of this controller is also easier. It has a
total number of 40 pins and there are 33 pins for input
and output.PIC16f877a finds its applications in a huge
number of devices. It is used in remote sensors,
security and safety devices, home automation and in
many industrial instruments.
4.1 ARDUINO UNO
Fig .5. Arduino UNO Board
Arduino is an open source computer hardware and
software company, the project that designs and
manufactures single-board microcontrollers and
microcontroller kits for building digital devices and
interactive objects thatcansenseandcontrol objectsin
the physical world. The Arduino project provides the
Arduino integrated development environment (IDE),
which is a cross-platform application written in the
programming languageJava. Inourproject,weusethis
module to as an interface to connect our PIC
microcontroller to the Wi-Fi module for cloud
processing. Arduino Uno R3 serves an important role
in data processing.
4.3 Wi-Fi MODULE (ESP 8266)
Fig.6. Wi-Fi Module
There are various types of Wi-Fi modules like
ESP8266, Arduino Shield or Heavy module. The
ESP8266 Wi-Fi Module is a self-contained SOC with
integrated TCP/IP protocol stack that can give any
microcontroller access to your Wi-Fi network. The
ESP8266 is capable of either hosting an application or
offloadingallWi-Fi networkingfunctionsfromanother
application processor.
4.4 TEMPERATURE SENSOR
Fig .6. Temperature Sensor
LM35 is a precision IC temperature sensor with its
output proportional to the temperature (in C). The

sensor circuitry is sealed and therefore it is not
subjected to oxidation and other processes. With
LM35, the temperature sensor can be measured more
accurately than withathermistor.Italsopossesseslow
self-heating and does not cause more than 0.1oC
temperature rise instillair.Theoperatingtemperature
range is from -55°C to 150°C. The outputvoltagevaries
by 10mV in response to every of rising/fall in ambient
temperature.
4.5 PIR SENSOR
Fig .7. PIR sensor
A Passive Infrared sensor (PIR sensor) is an
electronic sensor that measures infrared (IR) light
radiating from objects in its field of view. All objects
with a temperature above absolute zero emit heat
energy in the form of radiation. Usually, this radiation
isn't visible to the human eye because it radiates at
infrared wavelengths, but it can be detected by
electronic devices designed for such a purpose.
Whenever a human being (even a warm body or object
with some temperature) passes through the field of
view of the PIR sensor, then it detects the infrared
radiation emitted by hot body motion. Hence we can
detect the motion immediatelyandaidtothepatientas
the buzzer rings.
4.6 EYE BLINK SENSOR
Fig .8. Eye Blink Sensor
The IR receiver is used to receive the reflectedinfrared
rays of the eye. If the eye is closed means the output of
IR receiver is high otherwise the IR receiver output is
low. This to know the eye is closing or opening
position. This output is given to the logic circuit to
indicate the alarm and LCD.
4.7 MOISTURE SENSOR
Fig .9. Moisture sensor
The moisture sensor is a self-designed sensor it
detects the patient's wetconditionandintimatestothe
nurse via the buzzer. It displays the condition of the
patient via the LCD i.e wet detected or not so that the
patient could be helped out as soon as possible to
reduce the risk of infection and cold.
4.8 BUZZER
Fig.10. Buzzer
Abuzzerisasignalingdevice,usuallyelectronic,
typically used in automobiles, household appliances
such as a microwave oven, or game shows. It sounds a
warning in the form of a continuous or intermittent
buzzing or beeping sound. Here if any of the values
from the sensors reach more than a threshold level or
shows any abnormality then the buzzer rings to alert
the nearby caretakers to give immediate help to the
patient.
4.9 LCD MODULE
LCD (Liquid Crystal Display) [16*2] is the
technology used for displays in notebook and other
smaller computers.Likelight-emittingdiode(LED)and
gas-plasma technologies. The LCD module is used to
display the values coming out from the sensor
indicating the present health status of the patient. In
this LCD each character is displayed in a 5*7pixel
matrix.

4.10 THING SPEAK APPLICATION
The data obtained from the sensors is processed by
the microcontrollers and then using the Wi-Fi module
is sent to the cloud. The doctor can log in in his/her
device to monitor the currentstatusofthepatient.This
saves the time and cost for the doctor and remote
monitoring is done easily.
5. FUTURE SCOPE
Wireless sensors networks, a well-known technology
consist of small, battery-powered"motes"withlimited
computation and capability. With the usage of sensors
security issues and safety can be improved. Sensors
gather information about the physical world or
environment to take a decision i.e. automated
interactions with the environment. The remote
monitoring of the patients through automated devices
such as sensorsfornecessityinteractionormovements
in the body. Our current work can also be extended
further to monitor a patient's blood pressure, their
heartbeat, pulse rate etc., and directedtothedoctorvia
IoT.
6. RESULT AND OBSERVATION
Fig .11. Temperature sensor output.
Figure 11 describes the normal person body
temperature withrespecttothesituation.Itdepictsthe
range of temperature across various intervals of time
measured by the temperature sensor. The output
voltage is proportional to the temperature. From this
graph showing the temperature ranges of a normal
patient, we can be able to compare these values with
the temperature ranges of the patient or the coma
patient.Thetemperaturesensormeasuresthepatient's
body temperature and checks whether the
temperature is normal and makes an alert if the
temperature rises abnormally.
Fig .12: Moisture sensor output
In Table 1, we can see the body temperatures of many
patients with respect to the situation. For normal
patients, body temperatureliesintherangeof98.4'Fto
98.6'F. But when the patient's body temperature lies
above the normal temperature, then the patient needs
attention.
Here eight patients are considered their body
temperature is measured with respect to the situation.
It depicts the range of temperature across various
intervals of time measured by the temperature sensor
for all the patients.
Person
/time
6:00
am -
11.00
am
11:00
am -
4.00
pm
4:00
pm -
9.00
pm
9:00
pm -
2.00
am
2:00
am -
6.00
am
Patient1 98.5 98.5 98.54 98.62 98.6
Patient_2 98.6 98.72 98.84 99.08 99.93
Patient_3 98.44 99.4 98.49 98.55 98.5
Patient_4 98.62 98.89 99.34 99.8 100.36
Patient_5 98.52 98.45 98.45 98.47 98.49
Patient_6 98.46 98.48 98.45 98.45 98.48
Patient_7 98.56 98.45 98.51 98.62 98.6
Patient_8 98.84 99.64 100.18 100.78 101.99
Table.1. Temperature Database

By comparing the graph of different person it makes
the doctor analyze the affected patient's status much
easier. The graph shown below compares the body
temperature status of different patients so that the
doctor can analyze the affected patient's body
conditions. Here in this graph, the body temperatures
of 8 patients are compared.
From this graph, it can be said thatpatient_1,patient_3,
patient_5, patient_6, patient_7 have their normal body
temperature and the patient_2, patient_4, patient_8,
have the body temperature higher than the normal
body temperature.
Fig .13. Temperature Graph (multiple patients)
The above figure depicts the moisture levels of the
sheets acrossvariousintervalsoftimemeasuredbythe
moisture sensor. The moisture sensor measures the
moisture level of the sheets and checks whether the
sheet is dry and makes an alert if the sheet becomes
wet to the nearby caretakers.
Fig .14. PIR Sensor output
The above figure This parameter displays the body
movement of the patients. This depictsthemovements
of the patients across various intervals of time
measured by the PIR sensor. The PIR sensor measures
the body movements of the patients and checks
whether the bodymovement is detected and makes an
alert to the nearby caretakers if the PIR sensor detects
any body movements to the nearby caretakers.
In the table shown below, we can see the body
movements of three patients with respect to the
situation. Here the patient_1 and patient_3 is not idle
and hence it can be said patient_1andpatient_3arenot
at the critical stage to keep them under the
observation. From the graph, it shows that the
patient_2 is idle for a long period and hence he will be
kept in observation. The doctors can use these
database values for analyzing the healthstatusofthese
patients in the future.
Patient/
Time
12:01pm 12:05pm 12:10pm 12:15pm
Patient_1 612 636 634 619
Patient_2 00 00 00 00
Patient_3 517 639 650 614
Table.2. PIR Sensor monitored data
The graph depicts the various body movements of
three different patients, patient_1,patient_2,patient_3.
This graph shows that the two patients patient_1 and
patient_3 are normal and the patient_2 has to be kept
under the observation.
Fig.15. PIR Sensor output (multiple patients)

The below figure shows the database report for future
analysis. The doctor can view this report for future
analysis and clinical review. The enormous amount of
data created from such services could also be utilized
for planning future therapies by studying recovery
cycles of existing patients. We can also predict the
activity of the patientswhichhelpsthedoctorstoassist
the patients more precisely.
Created_at Entry
_Id
Field
1
Field
2
Field
3
2019-03-19 06:16:16 UTC 1 41 0 589
2019-03-19 06:26:18 UTC 2 39 0 591
2019-03-19 06:26:38 UTC 3 53 636 559
2019-03-19 06:26:58 UTC 4 60 634 786
2019-03-19 06:27:18 UTC 5 42 0 483
2019-03-19 06:27:38 UTC 6 101 0 510
2019-03-19 06:27:58 UTC 7 43 0 397
2019-03-24 06:36:29 UTC 8 106 0 970
2019-03-24 06:36:59 UTC 9 46 0 972
2019-03-24 06:38:22 UTC 10 110 0 976
2019-03-24 06:38:39 UTC 11 70 636 976
2019-03-24 06:38:59 UTC 12 70 0 976
2019-03-24 06:39:19 UTC 13 51 0 976
2019-03-24 06:39:39 UTC 14 101 0 977
2019-03-24 06:39:59 UTC 15 68 0 970
Table.3. Database report for analysis
7. CONCLUSION
In the health carefield,issuessuchaslong-termpatient
care in hospitals support the patients for their health
monitoring and make it easy for the doctors. The
proposed modelreduceshealthcarecostsbycollecting,
recording, analyzing and sharing large data streams in
real time and efficiently. This project is to reduce the
headache of a doctor to visit a patient every time he
needs to check his pulse, temperature etc. Hence the
time of doctors are saved and they can also help in the
emergencyscenarioasmuchaspossiblecollectingdata
information which includes patient's body movement,
eye movement, and temperature and sends an
emergency alert to patient's doctor with his current
status and full medical information via IoT.
8. REFERENCES
[1]Barathram Ramkumar and M. Sabarimalai
Manikandan“Real-Time Quality AwareECGTelemetry
System for IoT- Based Health MonitoringIEEEinternet
of things journals Vol. 5, No. 3,2017.
[2] Arundhati Sen and T.K. Rana on "Real-time
healthcare monitoring of a patient in a remote place"
IEEE internet of things journals Vol .3 No.12,2017.
[3]Nicolas and Wai Chi Fang“ An advanced patient
bedside monitoring system design basedontheWBAN
and telemedicine technologies ”IEEEinternetofthings
journals, Online (1567),2017.
[4]Atul S. Minhas and Poonam Kumari on “Wearable
Internet of Things – human activity tracking to clinical
test integration” IEEE internet of things journals,Vol.9
Issue 6,2015.

IRJET- Implementation of Cloud based Health Care Monitoring System using IoT

More Related Content

What's hot (20)

Similar to IRJET- Implementation of Cloud based Health Care Monitoring System using IoT (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET- Implementation of Cloud based Health Care Monitoring System using IoT